Fixed various spelling errors.

darcs-hash:20080113200151-35ec8-c587f020aec07a5e613068677bd3dd4f5c6189ac.gz

5 files changed, 30 insertions, 30 deletions

diff --git a/doc_src/and.txt b/doc_src/and.txt
index 4af50bbb..0562fae9 100644
--- a/doc_src/and.txt
+++ b/doc_src/and.txt
@@ -17,7 +17,7 @@ variable.
 \subsection and-example Example
 
 The following code runs the \c make command to build a program, if the
-build succceeds, the program is installed. If either step fails,
+build succeeds, the program is installed. If either step fails,
 <tt>make clean</tt> is run, which removes the files created by the
 build process
 
diff --git a/doc_src/case.txt b/doc_src/case.txt
index 6f124984..468cc3c4 100644
--- a/doc_src/case.txt
+++ b/doc_src/case.txt
@@ -19,7 +19,7 @@ regular wildcard expansion using filenames.
 
 Note that fish does not fall through on case statements. Though the
 syntax may look a bit like C switch statements, it behaves more like
-the case statementes of traditional shells.
+the case statements of traditional shells.
 
 Also note that command substitutions in a case statement will be
 evaluated even if it's body is not taken. This may seem
diff --git a/doc_src/fish_indent.txt b/doc_src/fish_indent.txt
index b05a40da..87729058 100644
--- a/doc_src/fish_indent.txt
+++ b/doc_src/fish_indent.txt
@@ -5,11 +5,11 @@
 
 \subsection fish_indent-description Description
 
-\c fish_indent is used to indent or otherwise prettyfy a piece of fish
+\c fish_indent is used to indent or otherwise prettify a piece of fish
 code. \c fish_indent reads commands from standard input and outputs
 them to standard output.
 
-\c fish_indent underatands the following options:
+\c fish_indent understands the following options:
 
 - <tt>-h</tt> or <tt>--help</tt> displays this help message and then exits
 - <tt>-i</tt> or <tt>--no-indent</tt> do not indent commands
diff --git a/doc_src/index.hdr.in b/doc_src/index.hdr.in
index 1a0fc2fe..3ca0dbbd 100644
--- a/doc_src/index.hdr.in
+++ b/doc_src/index.hdr.in
@@ -138,8 +138,8 @@ these characters, so called escape sequences are provided. These are:
 - <code>'\\x<i>xx</i>'</code>, where <code><i>xx</i></code> is a hexadecimal number, escapes the ascii character with the specified value. For example, \\x9 is the tab character.
 - <code>'\\X<i>xx</i>'</code>, where <code><i>xx</i></code> is a hexadecimal number, escapes a byte of data with the specified value. If you are using a mutibyte encoding, this can be used to enter invalid strings. Only use this if you know what you are doing.
 - <code>'\\<i>ooo</i>'</code>, where <code><i>ooo</i></code> is an octal number, escapes the ascii character with the specified value. For example, \\011 is the tab character.
-- <code>'\\u<i>xxxx</i>'</code>, where <code><i>xxxx</i></code> is a hexadecimal number, escapes the 16-bit unicode character with the specified value. For example, \\u9 is the tab character.
-- <code>'\\U<i>xxxxxxxx</i>'</code>, where <code><i>xxxxxxxx</i></code> is a hexadecimal number, escapes the 32-bit unicode character with the specified value. For example, \\U9 is the tab character.
+- <code>'\\u<i>xxxx</i>'</code>, where <code><i>xxxx</i></code> is a hexadecimal number, escapes the 16-bit Unicode character with the specified value. For example, \\u9 is the tab character.
+- <code>'\\U<i>xxxxxxxx</i>'</code>, where <code><i>xxxxxxxx</i></code> is a hexadecimal number, escapes the 32-bit Unicode character with the specified value. For example, \\U9 is the tab character.
 - <code>'\\c<i>x</i>'</code>, where <code><i>x</i></code> is a letter of the alphabet, escapes the control sequence generated by pressing the control key and the specified letter. For example, \\ci is the tab character
 
 \subsection redirects IO redirection
@@ -306,7 +306,7 @@ a filename consisting of the name of the function plus the suffix
 
 The default value for \$fish_function_path is \c ~/.config/fish/functions
 \c /etc/fish/functions \c /usr/share/fish/functions. The exact path
-to the last two of these may be slighly different depending on what
+to the last two of these may be slightly different depending on what
 install path prefix was chosen at configuration time. The rationale
 behind having three different directories is that the first one is for
 user specific functions, the second one is for system-wide additional
@@ -466,11 +466,11 @@ prints a list of all user groups with the groups members as description.
 
 <pre>__fish_complete_pids</pre>
 
-prints a list of all procceses IDs with the command name as description.
+prints a list of all processes IDs with the command name as description.
 
 <pre>__fish_complete_suffix SUFFIX</pre>
 
-performs file completion allowing only files ending in SUFFIX. The mimetype database is usded to find a suitable description.
+performs file completion allowing only files ending in SUFFIX. The mimetype database is used to find a suitable description.
 
 <pre>__fish_complete_users</pre>
 
@@ -494,7 +494,7 @@ prints a list of all known network interfaces.
 <pre>__fish_print_packages</pre>
 
 prints a list of all installed packages. This function currently handles
-debian, rpm and gentoo packages.
+Debian, rpm and Gentoo packages.
 
 
 
@@ -509,7 +509,7 @@ of the name of the command to complete and the suffix '.fish'.
 
 The default value for \$fish_complete_path is ~/.config/fish/completions,
 /etc/fish/completions and /usr/share/fish/completions. The exact
-path to the last two of these may be slighly different depending on
+path to the last two of these may be slightly different depending on
 what install path prefix was chosen at configuration time. If a
 suitable file is found in one of these directories, it will be
 automatically loaded and the search will be stopped. The rationale
@@ -519,14 +519,14 @@ completions and the last one is for default fish completions.
 
 If you have written new completions for a common
 Unix command, please consider sharing your work by sending it to <a
-href='mailto: fish-users@lists.sf.net'>the fish mailinglist</a>.
+href='mailto: fish-users@lists.sf.net'>the fish mailing list</a>.
 
 
 \section expand Parameter expansion (Globbing)
 
 When an argument for a program is given on the commandline, it
 undergoes the process of parameter expansion before it is sent on to
-the command. Parameter expansion is a powerful set of mechamisms that
+the command. Parameter expansion is a powerful set of mechanisms that
 allow you to expand the parameter in various ways, including
 performing wildcard matching on files, inserting the value of
 environment variables into the parameter or even using the output of
@@ -749,7 +749,7 @@ the shell through <a href="expand-variable">variable expansion</a>.
 
 Example:
 
-To use the value of a the variable \c smurf, write $ (dollar symbol)
+To use the value of the variable \c smurf, write $ (dollar symbol)
 followed by the name of the variable, like <code>echo Smurfs are
 usually $smurf_color</code>, which would print the result 'Smurfs are
 usually blue'.
@@ -868,7 +868,7 @@ echo $PATH[3]
 </pre>
 
 Note that array indices start at 1 in fish, not 0, as is more common
-in other languages. This is because many common unix tools like seq
+in other languages. This is because many common Unix tools like seq
 are more suited to such use. 
 
 If you do not use any brackets, all the elements of the array will be
@@ -975,7 +975,7 @@ variables can be one of the colors accepted by the <a
 href='commands.html#set_color'>set_color</a> command. The \c --bold
 or \c -b switches accepted by \c set_color are also accepted.
 
-The following variables are available to change the highligting colors
+The following variables are available to change the highlighting colors
 in fish:
 
 - \c fish_color_normal, the default color
@@ -1050,7 +1050,7 @@ Here are some of the commands available in the editor:
 - Alt-left and Alt-right moves one word left or right, or moves forward/backward in the directory history if the commandline is empty
 - Up and down search the command history for the previous/next command containing the string that was specified on the commandline before the search was started. If the commandline was empty when the search started, all commands match. See the <a href='#history'>history </a>section for more information on history searching.
 - Alt-up and Alt-down search the command history for the previous/next token containing the token under the cursor before the search was started. If the commandline was not on a token when the search started, all tokens match. See the <a href='#history'>history </a>section for more information on history searching.
-- Delete and backspace removes one character forwards or backwards respecitvely
+- Delete and backspace removes one character forwards or backwards respectively
 - Ctrl-c deletes entire line
 - Ctrl-d delete one character to the right of the cursor, unless the buffer is empty, in which case the shell will exit
 - Ctrl-k move contents from the cursor to the end of line to the <a href="#killring">killring</a>
@@ -1140,7 +1140,7 @@ than a single line:
 
 - Pressing the enter key while a block of commands is unclosed, i.e. when one or more block commands such as 'for', 'begin' or 'if' do not have a corresponding 'end' command.
 - Pressing Alt-enter instead of pressing the enter key.
-- By backslash escaping a newline, i.e. by inserting a backslash (\\) character pefore pressing the enter key.
+- By backslash escaping a newline, i.e. by inserting a backslash (\\) character before pressing the enter key.
 
 The fish commandline editor works exactly the same in single line mode
 and in multiline mode. To move between lines use the left and right
@@ -1280,9 +1280,9 @@ For more information on how to define new event handlers, see the
 documentation for the <a href='commands.html#function'>function</a>
 command.
 
-\subsection debuging Debuging fish scripts
+\subsection debugging Debugging fish scripts
 
-Fish includes a built in debuger. The debuger allows you to stop
+Fish includes a built in debugger. The debugger allows you to stop
 execution of a script at an arbitrary point and launch a prompt. This
 prompt can then be used to check or change the value of any variables
 or perform any shellscript command. To resume normal execution of the
@@ -1290,15 +1290,15 @@ script, simply exit the prompt.
 
 To start the debugger, simply call the builtin command
 'breakpoint'. The default action of the TRAP signal is to call this
-builtin, so a running script can be debuged by sending it the TRAP
-signal. Once in the debuger, it is easy to insert new breakpoints by
+builtin, so a running script can be debugged by sending it the TRAP
+signal. Once in the debugger, it is easy to insert new breakpoints by
 using the funced function to edit the definition of a function.
 
 \section issues Common issues with fish
 
 If you install fish in your home directory, fish will not work
 correctly for any other user than yourself. This is because fish needs
-its initalization files to function properly. To solve this
+its initialization files to function properly. To solve this
 problem, either copy the initialization files to each fish users home
 directory, or install them in /etc.
 
@@ -1310,7 +1310,7 @@ making a translation. Currently, only the shell itself can be
 translated, a future version of fish should also include translated
 manuals.
 
-To make a translation of fish, you will first need the sourcecode,
+To make a translation of fish, you will first need the source code,
 available from the <a href='http://www.fishshell.org'>fish
 homepage</a>. Download the latest version, and then extract it using a
 command like <code>tar -zxf fish-VERSION.tar.gz</code>.
@@ -1318,7 +1318,7 @@ command like <code>tar -zxf fish-VERSION.tar.gz</code>.
 Next, cd into the newly created fish directory using <code>cd
 fish-VERSION</code>.
 
-You will now need to configure the sourcecode using the command
+You will now need to configure the source code using the command
 <code>./configure</code>. This step might take a while.
 
 Before you continue, you will need to know the ISO 639 language code
@@ -1326,7 +1326,7 @@ of the language you are translating to. These codes can be found <a
 href='http://www.w3.org/WAI/ER/IG/ert/iso639.htm'>here</a>. For
 example, the language code for Uighur is ug.
 
-Now you have the sourcecode and it is properly configured. Lets start
+Now you have the source code and it is properly configured. Lets start
 translating. To do this, first create an empty translation table for
 the language you wish to translate to by writing <code>make
 po/[LANGUAGE CODE].po</code> in the fish terminal. For example, if you
@@ -1346,7 +1346,7 @@ msgstr ""
 </pre>
 
 The first line is the English string to translate, the second line
-should contain your translation. For example, in swedish the above
+should contain your translation. For example, in Swedish the above
 might become:
 
 <pre>
@@ -1395,7 +1395,7 @@ g++, javac, java, gcj, lpr, doxygen, whois)
 - Selectable completions in the pager
 - Per process output redirection
 - Reduce the space of the pager by one line to allow the commandline to remain visible.
-- down-arrow could be used to save the current command to the history. Or give the next command in-sequnce. Or both.
+- down-arrow could be used to save the current command to the history. Or give the next command in-sequence. Or both.
 - Drop support for inputrc-files. Use shellscripts and the bind builtin. Also, redo the syntax for the bind builtin to something more sane.
 - History could reload itself when the file is updated. This would need to be done in a clever way to avoid chain reactions
 - The error function should probably be moved into it's own library, and be made mere general purpose.
@@ -1417,7 +1417,7 @@ g++, javac, java, gcj, lpr, doxygen, whois)
 - delete-word is broken on the commandline 'sudo update-alternatives --config x-'
 - Sometimes autoheader needs to be run on a fresh tarball. Fix dates before creating tarballs.
 - The completion autoloader does not remember which completions where actually autoloaded, and may unload manually specified completions. 
-- There have been stray reports of issues with strang values of the PATH variable during startup. 
+- There have been stray reports of issues with strange values of the PATH variable during startup. 
 
 If you think you have found a bug not described here, please send a
 report to <a href="mailto:fish-users@lists.sf.net">fish-users@lists.sf.net</a>.
diff --git a/doc_src/or.txt b/doc_src/or.txt
index 9fc62a6a..a33cb50d 100644
--- a/doc_src/or.txt
+++ b/doc_src/or.txt
@@ -17,7 +17,7 @@ variable.
 \subsection or-example Example
 
 The following code runs the \c make command to build a program, if the
-build succceeds, the program is installed. If either step fails,
+build succeeds, the program is installed. If either step fails,
 <tt>make clean</tt> is run, which removes the files created by the
 build process