1 files changed, 0 insertions, 202 deletions
diff --git a/tools/addon-sdk-1.3/packages/api-utils/tests/test-byte-streams.js b/tools/addon-sdk-1.3/packages/api-utils/tests/test-byte-streams.js
deleted file mode 100644
index c66a9ba..0000000
--- a/tools/addon-sdk-1.3/packages/api-utils/tests/test-byte-streams.js
+++ /dev/null
@@ -1,202 +0,0 @@
-/* -*- Mode: Java; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- * vim:set ts=2 sw=2 sts=2 et filetype=javascript
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Jetpack.
- *
- * The Initial Developer of the Original Code is
- * the Mozilla Foundation.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *   Drew Willcoxon <adw@mozilla.com> (Original Author)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-const byteStreams = require("byte-streams");
-const file = require("file");
-const url = require("url");
-
-const STREAM_CLOSED_ERROR = "The stream is closed and cannot be used.";
-
-// This should match the constant of the same name in byte-streams.js.
-const BUFFER_BYTE_LEN = 0x8000;
-
-exports.testWriteRead = function (test) {
-  let fname = dataFileFilename();
-
-  // Write a small string less than the stream's buffer size...
-  let str = "exports.testWriteRead data!";
-  let stream = open(test, fname, true);
-  test.assert(!stream.closed, "stream.closed after open should be false");
-  stream.write(str);
-  stream.close();
-  test.assert(stream.closed, "Stream should be closed after stream.close");
-  test.assertRaises(function () stream.write("This shouldn't be written!"),
-                    STREAM_CLOSED_ERROR,
-                    "stream.write after close should raise error");
-
-  // ... and read it.
-  stream = open(test, fname);
-  test.assertEqual(stream.read(), str,
-                   "stream.read should return string written");
-  test.assertEqual(stream.read(), "",
-                   "stream.read at EOS should return empty string");
-  stream.close();
-  test.assert(stream.closed, "Stream should be closed after stream.close");
-  test.assertRaises(function () stream.read(),
-                    STREAM_CLOSED_ERROR,
-                    "stream.read after close should raise error");
-
-  file.remove(fname);
-};
-
-// Write a big string many times the size of the stream's buffer and read it.
-exports.testWriteReadBig = function (test) {
-  let str = "";
-  let bufLen = BUFFER_BYTE_LEN;
-  let fileSize = bufLen * 10;
-  for (let i = 0; i < fileSize; i++)
-    str += i % 10;
-  let fname = dataFileFilename();
-  let stream = open(test, fname, true);
-  stream.write(str);
-  stream.close();
-  stream = open(test, fname);
-  test.assertEqual(stream.read(), str,
-                   "stream.read should return string written");
-  stream.close();
-  file.remove(fname);
-};
-
-// The same, but write and read in chunks.
-exports.testWriteReadChunks = function (test) {
-  let str = "";
-  let bufLen = BUFFER_BYTE_LEN;
-  let fileSize = bufLen * 10;
-  for (let i = 0; i < fileSize; i++)
-    str += i % 10;
-  let fname = dataFileFilename();
-  let stream = open(test, fname, true);
-  let i = 0;
-  while (i < str.length) {
-    // Use a chunk length that spans buffers.
-    let chunk = str.substr(i, bufLen + 1);
-    stream.write(chunk);
-    i += bufLen + 1;
-  }
-  stream.close();
-  stream = open(test, fname);
-  let readStr = "";
-  bufLen = BUFFER_BYTE_LEN;
-  let readLen = bufLen + 1;
-  do {
-    var frag = stream.read(readLen);
-    readStr += frag;
-  } while (frag);
-  stream.close();
-  test.assertEqual(readStr, str,
-                   "stream.write and read in chunks should work as expected");
-  file.remove(fname);
-};
-
-exports.testReadLengths = function (test) {
-  let fname = dataFileFilename();
-  let str = "exports.testReadLengths data!";
-  let stream = open(test, fname, true);
-  stream.write(str);
-  stream.close();
-
-  stream = open(test, fname);
-  test.assertEqual(stream.read(str.length * 1000), str,
-                   "stream.read with big byte length should return string " +
-                   "written");
-  stream.close();
-
-  stream = open(test, fname);
-  test.assertEqual(stream.read(0), "",
-                   "string.read with zero byte length should return empty " +
-                   "string");
-  stream.close();
-
-  stream = open(test, fname);
-  test.assertEqual(stream.read(-1), "",
-                   "string.read with negative byte length should return " +
-                   "empty string");
-  stream.close();
-
-  file.remove(fname);
-};
-
-exports.testTruncate = function (test) {
-  let fname = dataFileFilename();
-  let str = "exports.testReadLengths data!";
-  let stream = open(test, fname, true);
-  stream.write(str);
-  stream.close();
-
-  stream = open(test, fname);
-  test.assertEqual(stream.read(), str,
-                   "stream.read should return string written");
-  stream.close();
-
-  stream = open(test, fname, true);
-  stream.close();
-
-  stream = open(test, fname);
-  test.assertEqual(stream.read(), "",
-                   "stream.read after truncate should be empty");
-  stream.close();
-
-  file.remove(fname);
-};
-
-exports.testUnload = function (test) {
-  let loader = test.makeSandboxedLoader();
-  let file = loader.require("file");
-
-  let filename = url.toFilename(__url__);
-  let stream = file.open(filename, "b");
-
-  loader.unload();
-  test.assert(stream.closed, "Stream should be closed after module unload");
-};
-
-// Returns the name of a file that should be used to test writing and reading.
-function dataFileFilename() {
-  let dir = file.dirname(url.toFilename(__url__));
-  return file.join(dir, "test-byte-streams-data");
-}
-
-// Opens and returns the given file and ensures it's of the correct class.
-function open(test, filename, forWriting) {
-  let stream = file.open(filename, forWriting ? "wb" : "b");
-  let klass = forWriting ? "ByteWriter" : "ByteReader";
-  test.assert(stream instanceof byteStreams[klass],
-              "Opened stream should be a " + klass);
-  return stream;
-}