diff options
Diffstat (limited to 'util/autoconf/make-stds.texi')
| -rw-r--r-- | util/autoconf/make-stds.texi | 625 |
1 files changed, 0 insertions, 625 deletions
diff --git a/util/autoconf/make-stds.texi b/util/autoconf/make-stds.texi deleted file mode 100644 index 95a42ec..0000000 --- a/util/autoconf/make-stds.texi +++ /dev/null @@ -1,625 +0,0 @@ -@comment This file is included by both standards.texi and make.texinfo. -@comment It was broken out of standards.texi on 1/6/93 by roland. - -@node Makefile Conventions -@chapter Makefile Conventions -@comment standards.texi does not print an index, but make.texinfo does. -@cindex makefile, conventions for -@cindex conventions for makefiles -@cindex standards for makefiles - -This chapter describes conventions for writing the Makefiles for GNU programs. - -@menu -* Makefile Basics:: -* Utilities in Makefiles:: -* Standard Targets:: -* Command Variables:: -* Directory Variables:: -@end menu - -@node Makefile Basics -@section General Conventions for Makefiles - -Every Makefile should contain this line: - -@example -SHELL = /bin/sh -@end example - -@noindent -to avoid trouble on systems where the @code{SHELL} variable might be -inherited from the environment. (This is never a problem with GNU -@code{make}.) - -Different @code{make} programs have incompatible suffix lists and -implicit rules, and this sometimes creates confusion or misbehavior. So -it is a good idea to set the suffix list explicitly using only the -suffixes you need in the particular Makefile, like this: - -@example -.SUFFIXES: -.SUFFIXES: .c .o -@end example - -@noindent -The first line clears out the suffix list, the second introduces all -suffixes which may be subject to implicit rules in this Makefile. - -Don't assume that @file{.} is in the path for command execution. When -you need to run programs that are a part of your package during the -make, please make sure that it uses @file{./} if the program is built as -part of the make or @file{$(srcdir)/} if the file is an unchanging part -of the source code. Without one of these prefixes, the current search -path is used. - -The distinction between @file{./} and @file{$(srcdir)/} is important -when using the @samp{--srcdir} option to @file{configure}. A rule of -the form: - -@smallexample -foo.1 : foo.man sedscript - sed -e sedscript foo.man > foo.1 -@end smallexample - -@noindent -will fail when the current directory is not the source directory, -because @file{foo.man} and @file{sedscript} are not in the current -directory. - -When using GNU @code{make}, relying on @samp{VPATH} to find the source -file will work in the case where there is a single dependency file, -since the @file{make} automatic variable @samp{$<} will represent the -source file wherever it is. (Many versions of @code{make} set @samp{$<} -only in implicit rules.) A makefile target like - -@smallexample -foo.o : bar.c - $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o -@end smallexample - -@noindent -should instead be written as - -@smallexample -foo.o : bar.c - $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@ -@end smallexample - -@noindent -in order to allow @samp{VPATH} to work correctly. When the target has -multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest -way to make the rule work well. For example, the target above for -@file{foo.1} is best written as: - -@smallexample -foo.1 : foo.man sedscript - sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@@ -@end smallexample - -@node Utilities in Makefiles -@section Utilities in Makefiles - -Write the Makefile commands (and any shell scripts, such as -@code{configure}) to run in @code{sh}, not in @code{csh}. Don't use any -special features of @code{ksh} or @code{bash}. - -The @code{configure} script and the Makefile rules for building and -installation should not use any utilities directly except these: - -@example -cat cmp cp echo egrep expr grep -ln mkdir mv pwd rm rmdir sed test touch -@end example - -Stick to the generally supported options for these programs. For -example, don't use @samp{mkdir -p}, convenient as it may be, because -most systems don't support it. - -The Makefile rules for building and installation can also use compilers -and related programs, but should do so via @code{make} variables so that the -user can substitute alternatives. Here are some of the programs we -mean: - -@example -ar bison cc flex install ld lex -make makeinfo ranlib texi2dvi yacc -@end example - -Use the following @code{make} variables: - -@example -$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LEX) -$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC) -@end example - -When you use @code{ranlib}, you should make sure nothing bad happens if -the system does not have @code{ranlib}. Arrange to ignore an error -from that command, and print a message before the command to tell the -user that failure of the @code{ranlib} command does not mean a problem. - -If you use symbolic links, you should implement a fallback for systems -that don't have symbolic links. - -It is ok to use other utilities in Makefile portions (or scripts) -intended only for particular systems where you know those utilities to -exist. - -@node Standard Targets -@section Standard Targets for Users - -All GNU programs should have the following targets in their Makefiles: - -@table @samp -@item all -Compile the entire program. This should be the default target. This -target need not rebuild any documentation files; Info files should -normally be included in the distribution, and DVI files should be made -only when explicitly asked for. - -@item install -Compile the program and copy the executables, libraries, and so on to -the file names where they should reside for actual use. If there is a -simple test to verify that a program is properly installed, this target -should run that test. - -The commands should create all the directories in which files are to be -installed, if they don't already exist. This includes the directories -specified as the values of the variables @code{prefix} and -@code{exec_prefix}, as well as all subdirectories that are needed. -One way to do this is by means of an @code{installdirs} target -as described below. - -Use @samp{-} before any command for installing a man page, so that -@code{make} will ignore any errors. This is in case there are systems -that don't have the Unix man page documentation system installed. - -The way to install Info files is to copy them into @file{$(infodir)} -with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run -the @code{install-info} program if it is present. @code{install-info} -is a script that edits the Info @file{dir} file to add or update the -menu entry for the given Info file; it will be part of the Texinfo package. -Here is a sample rule to install an Info file: - -@comment This example has been carefully formatted for the Make manual. -@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu. -@smallexample -$(infodir)/foo.info: foo.info -# There may be a newer info file in . than in srcdir. - -if test -f foo.info; then d=.; \ - else d=$(srcdir); fi; \ - $(INSTALL_DATA) $$d/foo.info $@@; \ -# Run install-info only if it exists. -# Use `if' instead of just prepending `-' to the -# line so we notice real errors from install-info. -# We use `$(SHELL) -c' because some shells do not -# fail gracefully when there is an unknown command. - if $(SHELL) -c 'install-info --version' \ - >/dev/null 2>&1; then \ - install-info --infodir=$(infodir) $$d/foo.info; \ - else true; fi -@end smallexample - -@item uninstall -Delete all the installed files that the @samp{install} target would -create (but not the noninstalled files such as @samp{make all} would -create). - -@comment The gratuitous blank line here is to make the table look better -@comment in the printed Make manual. Please leave it in. -@item clean - -Delete all files from the current directory that are normally created by -building the program. Don't delete the files that record the -configuration. Also preserve files that could be made by building, but -normally aren't because the distribution comes with them. - -Delete @file{.dvi} files here if they are not part of the distribution. - -@item distclean -Delete all files from the current directory that are created by -configuring or building the program. If you have unpacked the source -and built the program without creating any other files, @samp{make -distclean} should leave only the files that were in the distribution. - -@item mostlyclean -Like @samp{clean}, but may refrain from deleting a few files that people -normally don't want to recompile. For example, the @samp{mostlyclean} -target for GCC does not delete @file{libgcc.a}, because recompiling it -is rarely necessary and takes a lot of time. - -@item realclean -Delete everything from the current directory that can be reconstructed -with this Makefile. This typically includes everything deleted by -@code{distclean}, plus more: C source files produced by Bison, tags tables, -Info files, and so on. - -One exception, however: @samp{make realclean} should not delete -@file{configure} even if @file{configure} can be remade using a rule in -the Makefile. More generally, @samp{make realclean} should not delete -anything that needs to exist in order to run @file{configure} -and then begin to build the program. - -@item TAGS -Update a tags table for this program. - -@item info -Generate any Info files needed. The best way to write the rules is as -follows: - -@smallexample -info: foo.info - -foo.info: foo.texi chap1.texi chap2.texi - $(MAKEINFO) $(srcdir)/foo.texi -@end smallexample - -@noindent -You must define the variable @code{MAKEINFO} in the Makefile. It should -run the @code{makeinfo} program, which is part of the Texinfo -distribution. - -@item dvi -Generate DVI files for all TeXinfo documentation. -For example: - -@smallexample -dvi: foo.dvi - -foo.dvi: foo.texi chap1.texi chap2.texi - $(TEXI2DVI) $(srcdir)/foo.texi -@end smallexample - -@noindent -You must define the variable @code{TEXI2DVI} in the Makefile. It should -run the program @code{texi2dvi}, which is part of the Texinfo -distribution. Alternatively, write just the dependencies, and allow GNU -Make to provide the command. - -@item dist -Create a distribution tar file for this program. The tar file should be -set up so that the file names in the tar file start with a subdirectory -name which is the name of the package it is a distribution for. This -name can include the version number. - -For example, the distribution tar file of GCC version 1.40 unpacks into -a subdirectory named @file{gcc-1.40}. - -The easiest way to do this is to create a subdirectory appropriately -named, use @code{ln} or @code{cp} to install the proper files in it, and -then @code{tar} that subdirectory. - -The @code{dist} target should explicitly depend on all non-source files -that are in the distribution, to make sure they are up to date in the -distribution. -@xref{Releases, , Making Releases, standards, GNU Coding Standards}. - -@item check -Perform self-tests (if any). The user must build the program before -running the tests, but need not install the program; you should write -the self-tests so that they work when the program is built but not -installed. -@end table - -The following targets are suggested as conventional names, for programs -in which they are useful. - -@table @code -@item installcheck -Perform installation tests (if any). The user must build and install -the program before running the tests. You should not assume that -@file{$(bindir)} is in the search path. - -@item installdirs -It's useful to add a target named @samp{installdirs} to create the -directories where files are installed, and their parent directories. -There is a script called @file{mkinstalldirs} which is convenient for -this; find it in the Texinfo package.@c It's in /gd/gnu/lib/mkinstalldirs. -You can use a rule like this: - -@comment This has been carefully formatted to look decent in the Make manual. -@comment Please be sure not to make it extend any further to the right.--roland -@smallexample -# Make sure all installation directories (e.g. $(bindir)) -# actually exist by making them if necessary. -installdirs: mkinstalldirs - $(srcdir)/mkinstalldirs $(bindir) $(datadir) \ - $(libdir) $(infodir) \ - $(mandir) -@end smallexample -@end table - -@node Command Variables -@section Variables for Specifying Commands - -Makefiles should provide variables for overriding certain commands, options, -and so on. - -In particular, you should run most utility programs via variables. -Thus, if you use Bison, have a variable named @code{BISON} whose default -value is set with @samp{BISON = bison}, and refer to it with -@code{$(BISON)} whenever you need to use Bison. - -File management utilities such as @code{ln}, @code{rm}, @code{mv}, and -so on, need not be referred to through variables in this way, since users -don't need to replace them with other programs. - -Each program-name variable should come with an options variable that is -used to supply options to the program. Append @samp{FLAGS} to the -program-name variable name to get the options variable name---for -example, @code{BISONFLAGS}. (The name @code{CFLAGS} is an exception to -this rule, but we keep it because it is standard.) Use @code{CPPFLAGS} -in any compilation command that runs the preprocessor, and use -@code{LDFLAGS} in any compilation command that does linking as well as -in any direct use of @code{ld}. - -If there are C compiler options that @emph{must} be used for proper -compilation of certain files, do not include them in @code{CFLAGS}. -Users expect to be able to specify @code{CFLAGS} freely themselves. -Instead, arrange to pass the necessary options to the C compiler -independently of @code{CFLAGS}, by writing them explicitly in the -compilation commands or by defining an implicit rule, like this: - -@smallexample -CFLAGS = -g -ALL_CFLAGS = -I. $(CFLAGS) -.c.o: - $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $< -@end smallexample - -Do include the @samp{-g} option in @code{CFLAGS}, because that is not -@emph{required} for proper compilation. You can consider it a default -that is only recommended. If the package is set up so that it is -compiled with GCC by default, then you might as well include @samp{-O} -in the default value of @code{CFLAGS} as well. - -Put @code{CFLAGS} last in the compilation command, after other variables -containing compiler options, so the user can use @code{CFLAGS} to -override the others. - -Every Makefile should define the variable @code{INSTALL}, which is the -basic command for installing a file into the system. - -Every Makefile should also define the variables @code{INSTALL_PROGRAM} -and @code{INSTALL_DATA}. (The default for each of these should be -@code{$(INSTALL)}.) Then it should use those variables as the commands -for actual installation, for executables and nonexecutables -respectively. Use these variables as follows: - -@example -$(INSTALL_PROGRAM) foo $(bindir)/foo -$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a -@end example - -@noindent -Always use a file name, not a directory name, as the second argument of -the installation commands. Use a separate command for each file to be -installed. - -@node Directory Variables -@section Variables for Installation Directories - -Installation directories should always be named by variables, so it is -easy to install in a nonstandard place. The standard names for these -variables are as follows. - -These two variables set the root for the installation. All the other -installation directories should be subdirectories of one of these two, -and nothing should be directly installed into these two directories. - -@table @samp -@item prefix -A prefix used in constructing the default values of the variables listed -below. The default value of @code{prefix} should be @file{/usr/local} -(at least for now). - -@item exec_prefix -A prefix used in constructing the default values of some of the -variables listed below. The default value of @code{exec_prefix} should -be @code{$(prefix)}. - -Generally, @code{$(exec_prefix)} is used for directories that contain -machine-specific files (such as executables and subroutine libraries), -while @code{$(prefix)} is used directly for other directories. -@end table - -Executable programs are installed in one of the following directories. - -@table @samp -@item bindir -The directory for installing executable programs that users can run. -This should normally be @file{/usr/local/bin}, but write it as -@file{$(exec_prefix)/bin}. - -@item sbindir -The directory for installing executable programs that can be run from -the shell, but are only generally useful to system administrators. This -should normally be @file{/usr/local/sbin}, but write it as -@file{$(exec_prefix)/sbin}. - -@item libexecdir -@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94 -The directory for installing executable programs to be run by other -programs rather than by users. This directory should normally be -@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}. -@end table - -Data files used by the program during its execution are divided into -categories in two ways. - -@itemize @bullet -@item -Some files are normally modified by programs; others are never normally -modified (though users may edit some of these). - -@item -Some files are architecture-independent and can be shared by all -machines at a site; some are architecture-dependent and can be shared -only by machines of the same kind and operating system; others may never -be shared between two machines. -@end itemize - -This makes for six different possibilities. However, we want to -discourage the use of architecture-dependent files, aside from of object -files and libraries. It is much cleaner to make other data files -architecture-independent, and it is generally not hard. - -Therefore, here are the variables makefiles should use to specify -directories: - -@table @samp -@item datadir -The directory for installing read-only architecture independent data -files. This should normally be @file{/usr/local/share}, but write it as -@file{$(prefix)/share}. As a special exception, see @file{$(infodir)} -and @file{$(includedir)} below. - -@item sysconfdir -The directory for installing read-only data files that pertain to a -single machine--that is to say, files for configuring a host. Mailer -and network configuration files, @file{/etc/passwd}, and so forth belong -here. All the files in this directory should be ordinary ASCII text -files. This directory should normally be @file{/usr/local/etc}, but -write it as @file{$(prefix)/etc}. - -@c rewritten to avoid overfull hbox --tower -Do not install executables -@c here -in this directory (they probably -belong in @file{$(libexecdir)} or @file{$(sbindir))}. Also do not -install files that are modified in the normal course of their use -(programs whose purpose is to change the configuration of the system -excluded). Those probably belong in @file{$(localstatedir)}. - -@item sharedstatedir -The directory for installing architecture-independent data files which -the programs modify while they run. This should normally be -@file{/usr/local/com}, but write it as @file{$(prefix)/com}. - -@item localstatedir -The directory for installing data files which the programs modify while -they run, and that pertain to one specific machine. Users should never -need to modify files in this directory to configure the package's -operation; put such configuration information in separate files that go -in @file{datadir} or @file{$(sysconfdir)}. @file{$(localstatedir)} -should normally be @file{/usr/local/var}, but write it as -@file{$(prefix)/var}. - -@item libdir -The directory for object files and libraries of object code. Do not -install executables here, they probably belong in @file{$(libexecdir)} -instead. The value of @code{libdir} should normally be -@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}. - -@item infodir -The directory for installing the Info files for this package. By -default, it should be @file{/usr/local/info}, but it should be written -as @file{$(prefix)/info}. - -@item includedir -@c rewritten to avoid overfull hbox --roland -The directory for installing header files to be included by user -programs with the C @samp{#include} preprocessor directive. This -should normally be @file{/usr/local/include}, but write it as -@file{$(prefix)/include}. - -Most compilers other than GCC do not look for header files in -@file{/usr/local/include}. So installing the header files this way is -only useful with GCC. Sometimes this is not a problem because some -libraries are only really intended to work with GCC. But some libraries -are intended to work with other compilers. They should install their -header files in two places, one specified by @code{includedir} and one -specified by @code{oldincludedir}. - -@item oldincludedir -The directory for installing @samp{#include} header files for use with -compilers other than GCC. This should normally be @file{/usr/include}. - -The Makefile commands should check whether the value of -@code{oldincludedir} is empty. If it is, they should not try to use -it; they should cancel the second installation of the header files. - -A package should not replace an existing header in this directory unless -the header came from the same package. Thus, if your Foo package -provides a header file @file{foo.h}, then it should install the header -file in the @code{oldincludedir} directory if either (1) there is no -@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo -package. - -To tell whether @file{foo.h} came from the Foo package, put a magic -string in the file---part of a comment---and grep for that string. -@end table - -Unix-style man pages are installed in one of the following: - -@table @samp -@item mandir -The directory for installing the man pages (if any) for this package. -It should include the suffix for the proper section of the -manual---usually @samp{1} for a utility. It will normally be -@file{/usr/local/man/man1}, but you should write it as -@file{$(prefix)/man/man1}. - -@item man1dir -The directory for installing section 1 man pages. -@item man2dir -The directory for installing section 2 man pages. -@item @dots{} -Use these names instead of @samp{mandir} if the package needs to install man -pages in more than one section of the manual. - -@strong{Don't make the primary documentation for any GNU software be a -man page. Write a manual in Texinfo instead. Man pages are just for -the sake of people running GNU software on Unix, which is a secondary -application only.} - -@item manext -The file name extension for the installed man page. This should contain -a period followed by the appropriate digit; it should normally be @samp{.1}. - -@item man1ext -The file name extension for installed section 1 man pages. -@item man2ext -The file name extension for installed section 2 man pages. -@item @dots{} -Use these names instead of @samp{manext} if the package needs to install man -pages in more than one section of the manual. -@end table - -And finally, you should set the following variable: - -@table @samp -@item srcdir -The directory for the sources being compiled. The value of this -variable is normally inserted by the @code{configure} shell script. -@end table - -For example: - -@smallexample -@c I have changed some of the comments here slightly to fix an overfull -@c hbox, so the make manual can format correctly. --roland -# Common prefix for installation directories. -# NOTE: This directory must exist when you start the install. -prefix = /usr/local -exec_prefix = $(prefix) -# Where to put the executable for the command `gcc'. -bindir = $(exec_prefix)/bin -# Where to put the directories used by the compiler. -libexecdir = $(exec_prefix)/libexec -# Where to put the Info files. -infodir = $(prefix)/info -@end smallexample - -If your program installs a large number of files into one of the -standard user-specified directories, it might be useful to group them -into a subdirectory particular to that program. If you do this, you -should write the @code{install} rule to create these subdirectories. - -Do not expect the user to include the subdirectory name in the value of -any of the variables listed above. The idea of having a uniform set of -variable names for installation directories is to enable the user to -specify the exact same values for several different GNU packages. In -order for this to be useful, all the packages must be designed so that -they will work sensibly when the user does so. - |