aboutsummaryrefslogtreecommitdiffhomepage
path: root/src/opts/SkBlitRow_opts_SSE4_x64_asm.S
diff options
context:
space:
mode:
Diffstat (limited to 'src/opts/SkBlitRow_opts_SSE4_x64_asm.S')
-rw-r--r--src/opts/SkBlitRow_opts_SSE4_x64_asm.S472
1 files changed, 472 insertions, 0 deletions
diff --git a/src/opts/SkBlitRow_opts_SSE4_x64_asm.S b/src/opts/SkBlitRow_opts_SSE4_x64_asm.S
new file mode 100644
index 0000000000..9a754a635b
--- /dev/null
+++ b/src/opts/SkBlitRow_opts_SSE4_x64_asm.S
@@ -0,0 +1,472 @@
+/*
+ * Copyright 2014 The Android Open Source Project
+ *
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#ifdef CRBUG_399842_FIXED
+
+#if defined(__clang__) || (defined(__GNUC__) && !defined(SK_BUILD_FOR_MAC))
+
+#define EXTRACT_ALPHA(var1, var2) \
+ movdqa %var1, %var2; /* Clone source pixels to extract alpha */\
+ psrlw $8, %var2; /* Discard red and blue, leaving alpha and green */\
+ pshufhw $0xF5, %var2, %var2; /* Repeat alpha for scaling (high) */\
+ movdqa %xmm6, %xmm4; \
+ pshuflw $0xF5, %var2, %var2; /* Repeat alpha for scaling (low) */\
+ movdqa %xmm5, %xmm3; \
+ psubw %var2, %xmm4 /* Finalize alpha calculations */
+
+#define SCALE_PIXELS \
+ psllw $8, %xmm5; /* Filter out red and blue components */\
+ pmulhuw %xmm4, %xmm5; /* Scale red and blue */\
+ psrlw $8, %xmm3; /* Filter out alpha and green components */\
+ pmullw %xmm4, %xmm3 /* Scale alpha and green */
+
+
+/*
+ * void S32A_Opaque_BlitRow32_SSE4(SkPMColor* SK_RESTRICT dst,
+ * const SkPMColor* SK_RESTRICT src,
+ * int count, U8CPU alpha)
+ *
+ * This function is divided into six blocks: initialization, blit 4-15 pixels,
+ * blit 0-3 pixels, align destination for 16+ pixel blits,
+ * blit 16+ pixels with source unaligned, blit 16+ pixels with source aligned.
+ * There are some code reuse between the blocks.
+ *
+ * The primary optimization comes from checking the source pixels' alpha value.
+ * If the alpha is zero, the pixel can be skipped entirely.
+ * If the alpha is fully opaque, the pixel can be copied directly to the destination.
+ * According to collected statistics, these two cases are the most common.
+ * The main loop(s) uses pre-loading and unrolling in an attempt to reduce the
+ * memory latency worse-case.
+ */
+
+#ifdef __clang__
+ .text
+#else
+ .section .text.sse4.2,"ax",@progbits
+ .type S32A_Opaque_BlitRow32_SSE4_asm, @function
+#endif
+ .p2align 4
+#if defined(SK_BUILD_FOR_MAC)
+ .global _S32A_Opaque_BlitRow32_SSE4_asm
+ .private_extern _S32A_Opaque_BlitRow32_SSE4_asm
+_S32A_Opaque_BlitRow32_SSE4_asm:
+#else
+ .global S32A_Opaque_BlitRow32_SSE4_asm
+ .hidden S32A_Opaque_BlitRow32_SSE4_asm
+S32A_Opaque_BlitRow32_SSE4_asm:
+#endif
+ .cfi_startproc
+ prefetcht0 (%rsi)
+ movl %edx, %ecx // Pixel count
+ movq %rdi, %rdx // Destination pointer
+ movq %rsi, %rax // Source pointer
+
+ // Setup SSE constants
+ movdqa .LAlphaCheckMask(%rip), %xmm7 // 0xFF000000 mask to check alpha
+ movdqa .LInverseAlphaCalc(%rip), %xmm6// 16-bit 256 to calculate inv. alpha
+ movdqa .LResultMergeMask(%rip), %xmm0 // 0x00FF00FF mask (Must be in xmm0 because of pblendvb)
+
+ subl $4, %ecx // Check if we have only 0-3 pixels
+ js .LReallySmall
+ cmpl $11, %ecx // Do we have enough pixels to run the main loop?
+ ja .LBigBlit
+
+ // Handle small blits (4-15 pixels)
+ ////////////////////////////////////////////////////////////////////////////////
+ xorq %rdi, %rdi // Reset offset to zero
+
+.LSmallLoop:
+ lddqu (%rax, %rdi), %xmm1 // Load four source pixels
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LSmallAlphaNotOpaqueOrZero
+ jz .LSmallAlphaZero
+ movdqu %xmm1, (%rdx, %rdi) // Store four destination pixels
+.LSmallAlphaZero:
+ addq $16, %rdi
+ subl $4, %ecx // Check if there are four additional pixels, at least
+ jns .LSmallLoop
+ jmp .LSmallRemaining
+
+ // Handle mixed alphas (calculate and scale)
+ .p2align 4
+.LSmallAlphaNotOpaqueOrZero:
+ lddqu (%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ addq $16, %rdi
+ subl $4, %ecx // Check if there are four additional pixels, at least
+ pblendvb %xmm5, %xmm3 // Mask in %xmm0, implicitly
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+ movdqu %xmm1, -16(%rdx, %rdi) // Store four destination pixels
+ jns .LSmallLoop
+
+ // Handle the last 0-3 pixels (also used by the main loops)
+.LSmallRemaining:
+ cmpl $-4, %ecx // Check if we are done
+ je .LSmallExit
+ sall $2, %ecx // Calculate offset for last pixels
+ movslq %ecx, %rcx
+ addq %rcx, %rdi
+
+ lddqu (%rax, %rdi), %xmm1 // Load last four source pixels (overlapping)
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ jc .LSmallRemainingStoreAll// If all alphas are opaque, just store (overlapping)
+ jz .LSmallExit // If all alphas are zero, skip the pixels completely
+
+ // Handle mixed alphas (calculate and scale)
+ lddqu (%rdx, %rdi), %xmm5 // Load last four destination pixels (overlapping)
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+
+ psllw $8, %xmm3 // Filter out red and blue components
+ pmulhuw %xmm4, %xmm3 // Scale red and blue
+ movdqa %xmm5, %xmm2
+ psrlw $8, %xmm2 // Filter out alpha and green components
+ pmullw %xmm4, %xmm2 // Scale alpha and green
+
+ cmpl $-8, %ecx // Check how many pixels should be written
+ pblendvb %xmm3, %xmm2 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm2, %xmm1 // Add source and destination pixels together
+ jb .LSmallPixelsLeft1
+ ja .LSmallPixelsLeft3 // To avoid double-blending the overlapping pixels...
+ pblendw $0xF0, %xmm1, %xmm5 // Merge only the final two pixels to the destination
+ movdqu %xmm5, (%rdx, %rdi) // Store last two destination pixels
+.LSmallExit:
+ ret
+
+.LSmallPixelsLeft1:
+ pblendw $0xC0, %xmm1, %xmm5 // Merge only the final pixel to the destination
+ movdqu %xmm5, (%rdx, %rdi) // Store last destination pixel
+ ret
+
+.LSmallPixelsLeft3:
+ pblendw $0xFC, %xmm1, %xmm5 // Merge only the final three pixels to the destination
+ movdqu %xmm5, (%rdx, %rdi) // Store last three destination pixels
+ ret
+
+.LSmallRemainingStoreAll:
+ movdqu %xmm1, (%rdx, %rdi) // Store last destination pixels (overwrite)
+ ret
+
+ // Handle really small blits (0-3 pixels)
+ ////////////////////////////////////////////////////////////////////////////////
+.LReallySmall:
+ addl $4, %ecx
+ jle .LReallySmallExit
+ pcmpeqd %xmm1, %xmm1
+ cmpl $2, %ecx // Check how many pixels should be read
+ pinsrd $0x0, (%rax), %xmm1 // Load one source pixel
+ pinsrd $0x0, (%rdx), %xmm5 // Load one destination pixel
+ jb .LReallySmallCalc
+ pinsrd $0x1, 4(%rax), %xmm1 // Load second source pixel
+ pinsrd $0x1, 4(%rdx), %xmm5 // Load second destination pixel
+ je .LReallySmallCalc
+ pinsrd $0x2, 8(%rax), %xmm1 // Load third source pixel
+ pinsrd $0x2, 8(%rdx), %xmm5 // Load third destination pixel
+
+.LReallySmallCalc:
+ ptest %xmm7, %xmm1 // Check if all alphas are opaque
+ jc .LReallySmallStore // If all alphas are opaque, just store
+
+ // Handle mixed alphas (calculate and scale)
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+
+ pand %xmm0, %xmm5 // Filter out red and blue components
+ pmullw %xmm4, %xmm5 // Scale red and blue
+ psrlw $8, %xmm3 // Filter out alpha and green components
+ pmullw %xmm4, %xmm3 // Scale alpha and green
+
+ psrlw $8, %xmm5 // Combine results
+ pblendvb %xmm5, %xmm3 // Mask in %xmm0, implicitly
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+
+.LReallySmallStore:
+ cmpl $2, %ecx // Check how many pixels should be written
+ pextrd $0x0, %xmm1, (%rdx) // Store one destination pixel
+ jb .LReallySmallExit
+ pextrd $0x1, %xmm1, 4(%rdx) // Store second destination pixel
+ je .LReallySmallExit
+ pextrd $0x2, %xmm1, 8(%rdx) // Store third destination pixel
+.LReallySmallExit:
+ ret
+
+ // Handle bigger blit operations (16+ pixels)
+ ////////////////////////////////////////////////////////////////////////////////
+ .p2align 4
+.LBigBlit:
+ // Align destination?
+ testl $0xF, %edx
+ lddqu (%rax), %xmm1 // Pre-load four source pixels
+ jz .LAligned
+
+ movq %rdx, %rdi // Calculate alignment of destination pointer
+ negq %rdi
+ andl $0xF, %edi
+
+ // Handle 1-3 pixels to align destination
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ jz .LAlignDone // If all alphas are zero, just skip
+ lddqu (%rdx), %xmm5 // Load four destination pixels
+ jc .LAlignStore // If all alphas are opaque, just store
+
+ // Handle mixed alphas (calculate and scale)
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+
+ psllw $8, %xmm3 // Filter out red and blue components
+ pmulhuw %xmm4, %xmm3 // Scale red and blue
+ movdqa %xmm5, %xmm2
+ psrlw $8, %xmm2 // Filter out alpha and green components
+ pmullw %xmm4, %xmm2 // Scale alpha and green
+
+ pblendvb %xmm3, %xmm2 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm2, %xmm1 // Add source and destination pixels together
+
+.LAlignStore:
+ cmpl $8, %edi // Check how many pixels should be written
+ jb .LAlignPixelsLeft1
+ ja .LAlignPixelsLeft3
+ pblendw $0x0F, %xmm1, %xmm5 // Blend two pixels
+ jmp .LAlignStorePixels
+
+.LAlignPixelsLeft1:
+ pblendw $0x03, %xmm1, %xmm5 // Blend one pixel
+ jmp .LAlignStorePixels
+
+.LAlignPixelsLeft3:
+ pblendw $0x3F, %xmm1, %xmm5 // Blend three pixels
+
+.LAlignStorePixels:
+ movdqu %xmm5, (%rdx) // Store destination pixels
+
+.LAlignDone:
+ addq %rdi, %rax // Adjust pointers and pixel count
+ addq %rdi, %rdx
+ shrq $2, %rdi
+ lddqu (%rax), %xmm1 // Pre-load new source pixels (after alignment)
+ subl %edi, %ecx
+
+.LAligned: // Destination is guaranteed to be 16 byte aligned
+ xorq %rdi, %rdi // Reset offset to zero
+ subl $8, %ecx // Decrease counter (Reserve four pixels for the cleanup)
+ testl $0xF, %eax // Check alignment of source pointer
+ jz .LAlignedLoop
+
+ // Source not aligned to destination
+ ////////////////////////////////////////////////////////////////////////////////
+ .p2align 4
+.LUnalignedLoop: // Main loop for unaligned, handles eight pixels per iteration
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero00
+ lddqu 16(%rax, %rdi), %xmm2 // Pre-load four source pixels
+ jz .LAlphaZero00
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+
+.LAlphaZero00:
+ ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero01
+ lddqu 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+ jz .LAlphaZero01
+ movdqa %xmm2, 16(%rdx, %rdi) // Store four destination pixels
+
+.LAlphaZero01:
+ addq $32, %rdi // Adjust offset and pixel count
+ subl $8, %ecx
+ jae .LUnalignedLoop
+ addl $8, %ecx // Adjust pixel count
+ jmp .LLoopCleanup0
+
+ .p2align 4
+.LAlphaNotOpaqueOrZero00:
+ movdqa (%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ lddqu 16(%rax, %rdi), %xmm2 // Pre-load four source pixels
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+
+ // Handle next four pixels
+ ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero01
+ lddqu 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+ jz .LAlphaZero02
+ movdqa %xmm2, 16(%rdx, %rdi) // Store four destination pixels
+.LAlphaZero02:
+ addq $32, %rdi // Adjust offset and pixel count
+ subl $8, %ecx
+ jae .LUnalignedLoop
+ addl $8, %ecx // Adjust pixel count
+ jmp .LLoopCleanup0
+
+ .p2align 4
+.LAlphaNotOpaqueOrZero01:
+ movdqa 16(%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm2, xmm1) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ lddqu 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+ addq $32, %rdi
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm2 // Add source and destination pixels together
+ subl $8, %ecx
+ movdqa %xmm2, -16(%rdx, %rdi) // Store four destination pixels
+ jae .LUnalignedLoop
+ addl $8, %ecx // Adjust pixel count
+
+ // Cleanup - handle pending pixels from loop
+.LLoopCleanup0:
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero02
+ jz .LAlphaZero03
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+.LAlphaZero03:
+ addq $16, %rdi
+ subl $4, %ecx
+ js .LSmallRemaining // Reuse code from small loop
+
+.LRemain0:
+ lddqu (%rax, %rdi), %xmm1 // Load four source pixels
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero02
+ jz .LAlphaZero04
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+.LAlphaZero04:
+ addq $16, %rdi
+ subl $4, %ecx
+ jmp .LSmallRemaining // Reuse code from small loop
+
+.LAlphaNotOpaqueOrZero02:
+ movdqa (%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ addq $16, %rdi
+ subl $4, %ecx
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+ movdqa %xmm1, -16(%rdx, %rdi) // Store four destination pixels
+ js .LSmallRemaining // Reuse code from small loop
+ jmp .LRemain0
+
+ // Source aligned to destination
+ ////////////////////////////////////////////////////////////////////////////////
+ .p2align 4
+.LAlignedLoop: // Main loop for aligned, handles eight pixels per iteration
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero10
+ movdqa 16(%rax, %rdi), %xmm2 // Pre-load four source pixels
+ jz .LAlphaZero10
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+
+.LAlphaZero10:
+ ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero11
+ movdqa 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+ jz .LAlphaZero11
+ movdqa %xmm2, 16(%rdx, %rdi) // Store four destination pixels
+
+.LAlphaZero11:
+ addq $32, %rdi // Adjust offset and pixel count
+ subl $8, %ecx
+ jae .LAlignedLoop
+ addl $8, %ecx // Adjust pixel count
+ jmp .LLoopCleanup1
+
+ .p2align 4
+.LAlphaNotOpaqueOrZero10:
+ movdqa (%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ movdqa 16(%rax, %rdi), %xmm2 // Pre-load four source pixels
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+
+ // Handle next four pixels
+ ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero11
+ movdqa 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+ jz .LAlphaZero12
+ movdqa %xmm2, 16(%rdx, %rdi) // Store four destination pixels
+.LAlphaZero12:
+ addq $32, %rdi // Adjust offset and pixel count
+ subl $8, %ecx
+ jae .LAlignedLoop
+ addl $8, %ecx // Adjust pixel count
+ jmp .LLoopCleanup1
+
+ .p2align 4
+.LAlphaNotOpaqueOrZero11:
+ movdqa 16(%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm2, xmm1) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+ movdqa 32(%rax, %rdi), %xmm1 // Pre-load four source pixels
+
+ addq $32, %rdi
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm2 // Add source and destination pixels together
+ subl $8, %ecx
+ movdqa %xmm2, -16(%rdx, %rdi) // Store four destination pixels
+ jae .LAlignedLoop
+ addl $8, %ecx // Adjust pixel count
+
+ // Cleanup - handle four pending pixels from loop
+.LLoopCleanup1:
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero12
+ jz .LAlphaZero13
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+.LAlphaZero13:
+ addq $16, %rdi
+ subl $4, %ecx
+ js .LSmallRemaining // Reuse code from small loop
+
+.LRemain1:
+ movdqa (%rax, %rdi), %xmm1 // Pre-load four source pixels
+ ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque
+ ja .LAlphaNotOpaqueOrZero12
+ jz .LAlphaZero14
+ movdqa %xmm1, (%rdx, %rdi) // Store four destination pixels
+.LAlphaZero14:
+ addq $16, %rdi
+ subl $4, %ecx
+ jmp .LSmallRemaining // Reuse code from small loop
+
+.LAlphaNotOpaqueOrZero12:
+ movdqa (%rdx, %rdi), %xmm5 // Load four destination pixels
+ EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value
+ SCALE_PIXELS // Scale pixels using alpha
+
+ addq $16, %rdi
+ subl $4, %ecx
+ pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly)
+ paddb %xmm3, %xmm1 // Add source and destination pixels together
+ movdqa %xmm1, -16(%rdx, %rdi) // Store four destination pixels
+ js .LSmallRemaining // Reuse code from small loop
+ jmp .LRemain1
+
+ .cfi_endproc
+#ifndef __clang__
+ .size S32A_Opaque_BlitRow32_SSE4_asm, .-S32A_Opaque_BlitRow32_SSE4_asm
+#endif
+
+ // Constants for SSE code
+#ifndef __clang__
+ .section .rodata
+#endif
+ .p2align 4
+.LAlphaCheckMask:
+ .long 0xFF000000, 0xFF000000, 0xFF000000, 0xFF000000
+.LInverseAlphaCalc:
+ .word 256, 256, 256, 256, 256, 256, 256, 256
+.LResultMergeMask:
+ .long 0x00FF00FF, 0x00FF00FF, 0x00FF00FF, 0x00FF00FF
+#endif
+
+#endif // CRBUG_399842_FIXED