diff options
Diffstat (limited to 'infra/bots/recipes/perf.expected')
8 files changed, 66 insertions, 22 deletions
diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus10-CPU-Exynos5250-arm-Release-All-Android.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus10-CPU-Exynos5250-arm-Release-All-Android.json index cf01e1702c..730e4c6023 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus10-CPU-Exynos5250-arm-Release-All-Android.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus10-CPU-Exynos5250-arm-Release-All-Android.json @@ -576,7 +576,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "Nexus10", "0.6" @@ -605,7 +605,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus5-GPU-Adreno330-arm-Debug-All-Android.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus5-GPU-Adreno330-arm-Debug-All-Android.json index 79353c6b32..7a56ab9864 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus5-GPU-Adreno330-arm-Debug-All-Android.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus5-GPU-Adreno330-arm-Debug-All-Android.json @@ -540,7 +540,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "Nexus5", "0.6" @@ -569,7 +569,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus7-GPU-Tegra3-arm-Release-All-Android.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus7-GPU-Tegra3-arm-Release-All-Android.json index 01b5ad37df..2d41ceedfa 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus7-GPU-Tegra3-arm-Release-All-Android.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-Nexus7-GPU-Tegra3-arm-Release-All-Android.json @@ -576,7 +576,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "Nexus7", "0.6" @@ -605,7 +605,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android.json index 474096647f..1d40e3030f 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android.json @@ -576,7 +576,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -605,7 +605,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android_Vulkan.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android_Vulkan.json index 2424c447e0..bdfd09a580 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android_Vulkan.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Release-All-Android_Vulkan.json @@ -576,7 +576,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -605,7 +605,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/Perf-Android-Clang-PixelC-GPU-TegraX1-arm64-Release-All-Android_Skpbench.json b/infra/bots/recipes/perf.expected/Perf-Android-Clang-PixelC-GPU-TegraX1-arm64-Release-All-Android_Skpbench.json index 4dbf05c630..54eb56edbc 100644 --- a/infra/bots/recipes/perf.expected/Perf-Android-Clang-PixelC-GPU-TegraX1-arm64-Release-All-Android_Skpbench.json +++ b/infra/bots/recipes/perf.expected/Perf-Android-Clang-PixelC-GPU-TegraX1-arm64-Release-All-Android_Skpbench.json @@ -576,7 +576,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "PixelC", "0.6" @@ -605,7 +605,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/cpu_scale_failed.json b/infra/bots/recipes/perf.expected/cpu_scale_failed.json index 84161e13ac..fda135086b 100644 --- a/infra/bots/recipes/perf.expected/cpu_scale_failed.json +++ b/infra/bots/recipes/perf.expected/cpu_scale_failed.json @@ -540,7 +540,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -570,7 +570,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", @@ -621,7 +625,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -651,7 +655,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", @@ -702,7 +710,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -732,7 +740,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", diff --git a/infra/bots/recipes/perf.expected/cpu_scale_failed_once.json b/infra/bots/recipes/perf.expected/cpu_scale_failed_once.json index 4a301748db..65662ffefb 100644 --- a/infra/bots/recipes/perf.expected/cpu_scale_failed_once.json +++ b/infra/bots/recipes/perf.expected/cpu_scale_failed_once.json @@ -540,7 +540,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -570,7 +570,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", @@ -621,7 +625,7 @@ "cmd": [ "python", "-u", - "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", + "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\nmodel = sys.argv[2]\ntarget_percent = float(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nif model == 'Nexus10':\n # Nexus10 doesn't list available frequencies, but it does give a\n # min and a max and seems to round to the nearest 100khz, so a\n # subset of those available are here.\n available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,\n 1400000, 1700000]\nelif model == 'Nexus7':\n # Nexus7 claims to support 1300000, but only really allows 1200000\n available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,\n 860000, 1000000, 1100000, 1200000]\nelse:\n # Most devices give a list of their available frequencies.\n available_freqs = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'])\n\n # Check for message like '/system/bin/sh: file not found'\n if available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\n else:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\nsubprocess.check_output([ADB, 'shell', 'echo \"userspace\" > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor'])\n# If scaling_max_freq is lower than our attempted setting, it won't take.\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' % freq])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed' % freq])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq']).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", "adb.1.0.35", "NexusPlayer", "0.6" @@ -650,7 +654,11 @@ "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", "@@@STEP_LOG_LINE@python.inline@@@@", "@@@STEP_LOG_LINE@python.inline@if model == 'Nexus10':@@@", - "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 300000, 400000, 500000, 600000, 700000, 800000]@@@", + "@@@STEP_LOG_LINE@python.inline@ # Nexus10 doesn't list available frequencies, but it does give a@@@", + "@@@STEP_LOG_LINE@python.inline@ # min and a max and seems to round to the nearest 100khz, so a@@@", + "@@@STEP_LOG_LINE@python.inline@ # subset of those available are here.@@@", + "@@@STEP_LOG_LINE@python.inline@ available_freqs = [200000, 400000, 600000, 800000, 1000000, 1200000,@@@", + "@@@STEP_LOG_LINE@python.inline@ 1400000, 1700000]@@@", "@@@STEP_LOG_LINE@python.inline@elif model == 'Nexus7':@@@", "@@@STEP_LOG_LINE@python.inline@ # Nexus7 claims to support 1300000, but only really allows 1200000@@@", "@@@STEP_LOG_LINE@python.inline@ available_freqs = [51000, 102000, 204000, 340000, 475000, 640000, 760000,@@@", |