Avoid re-rendering stencil clip for every draw with reducable clip stack

Fixes the cases where clip stack reduction would cause clip to be
re-rendered to stencil for each draw call. This causes unneeded
slowdown.

Stencil cache would not be used because the clip stack generation id communicated
by the clip stack element list would be invalid. This happended due to

 a) clip stack reduction creating new elements in the element list.

 b) purging logic removing the generation id, but reduction logic
    selecting already purged element, and thus the generation id, as
    the representative state of the clip.

Cases of a) where reduction would flatten the stack to a single new
element were fixed by assigning the generation id of the top-most
element of the clip stack as the generation id of the new
element. This is not strictly minimal, but enables more caching than
using invalid id.

Cases of a) where reduction would substitute a stack element with a
new element the generation id of the substituted element is used.

The b) part was fixed by removing the purging logic. It was not
exactly correct, as the previously purged states were actually
used. The purging was not used for anything.

Changes SkClipStack API to highlight that invalid generation id is
never returned by SkClipStack. Empty stacks are wide open. Changes the
clients to reflect this.

Fixes a crash when not passing anti-alias out parameter to
GrReducedClip::ReduceClipStack. The crash is not exercised in the
current code.

R=bsalomon@google.com, robertphillips@google.com

Author: kkinnunen@nvidia.com

Review URL: https://codereview.chromium.org/48593003

git-svn-id: http://skia.googlecode.com/svn/trunk@12084 2bbb7eff-a529-9590-31e7-b0007b416f81

1 files changed, 170 insertions, 1 deletions

diff --git a/tests/ClipStackTest.cpp b/tests/ClipStackTest.cpp
index 04b48b6783..5f85e6a83e 100644
--- a/tests/ClipStackTest.cpp
+++ b/tests/ClipStackTest.cpp
@@ -271,6 +271,7 @@ static void test_bounds(skiatest::Reporter* reporter, bool useRects) {
             }
 
             REPORTER_ASSERT(reporter, !stack.isWideOpen());
+            REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID != stack.getTopmostGenID());
 
             stack.getConservativeBounds(0, 0, 100, 100, &devClipBound,
                                         &isIntersectionOfRects);
@@ -293,6 +294,12 @@ static void test_bounds(skiatest::Reporter* reporter, bool useRects) {
 
 // Test out 'isWideOpen' entry point
 static void test_isWideOpen(skiatest::Reporter* reporter) {
+    {
+        // Empty stack is wide open. Wide open stack means that gen id is wide open.
+        SkClipStack stack;
+        REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
+    }
 
     SkRect rectA, rectB;
 
@@ -304,6 +311,7 @@ static void test_isWideOpen(skiatest::Reporter* reporter) {
         SkClipStack stack;
 
         REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
     }
 
     // Test out case where the user specifies a union that includes everything
@@ -322,6 +330,7 @@ static void test_isWideOpen(skiatest::Reporter* reporter) {
         stack.clipDevPath(clipB, SkRegion::kUnion_Op, false);
 
         REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
     }
 
     // Test out union w/ a wide open clip
@@ -331,6 +340,7 @@ static void test_isWideOpen(skiatest::Reporter* reporter) {
         stack.clipDevRect(rectA, SkRegion::kUnion_Op, false);
 
         REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
     }
 
     // Test out empty difference from a wide open clip
@@ -343,6 +353,7 @@ static void test_isWideOpen(skiatest::Reporter* reporter) {
         stack.clipDevRect(emptyRect, SkRegion::kDifference_Op, false);
 
         REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
     }
 
     // Test out return to wide open
@@ -354,10 +365,12 @@ static void test_isWideOpen(skiatest::Reporter* reporter) {
         stack.clipDevRect(rectA, SkRegion::kReplace_Op, false);
 
         REPORTER_ASSERT(reporter, !stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID != stack.getTopmostGenID());
 
         stack.restore();
 
         REPORTER_ASSERT(reporter, stack.isWideOpen());
+        REPORTER_ASSERT(reporter, SkClipStack::kWideOpenGenID == stack.getTopmostGenID());
     }
 }
 
@@ -940,16 +953,19 @@ static void test_reduced_clip_stack(skiatest::Reporter* reporter) {
         typedef GrReducedClip::ElementList ElementList;
         // Get the reduced version of the stack.
         ElementList reducedClips;
-
+        int32_t reducedGenID;
         GrReducedClip::InitialState initial;
         SkIRect tBounds(inflatedIBounds);
         SkIRect* tightBounds = r.nextBool() ? &tBounds : NULL;
         GrReducedClip::ReduceClipStack(stack,
                                        inflatedIBounds,
                                        &reducedClips,
+                                       &reducedGenID,
                                        &initial,
                                        tightBounds);
 
+        REPORTER_ASSERT(reporter, SkClipStack::kInvalidGenID != reducedGenID);
+
         // Build a new clip stack based on the reduced clip elements
         SkClipStack reducedStack;
         if (GrReducedClip::kAllOut_InitialState == initial) {
@@ -986,6 +1002,157 @@ static void test_reduced_clip_stack(skiatest::Reporter* reporter) {
     }
 }
 
+static void test_reduced_clip_stack_genid(skiatest::Reporter* reporter) {
+    {
+        SkClipStack stack;
+        stack.clipDevRect(SkRect::MakeXYWH(0, 0, 100, 100), SkRegion::kReplace_Op, true);
+        stack.clipDevRect(SkRect::MakeXYWH(0, 0, 50.3, 50.3), SkRegion::kReplace_Op, true);
+        SkIRect inflatedIBounds = SkIRect::MakeXYWH(0, 0, 100, 100);
+
+        GrReducedClip::ElementList reducedClips;
+        int32_t reducedGenID;
+        GrReducedClip::InitialState initial;
+        SkIRect tightBounds;
+
+        GrReducedClip::ReduceClipStack(stack,
+                                       inflatedIBounds,
+                                       &reducedClips,
+                                       &reducedGenID,
+                                       &initial,
+                                       &tightBounds);
+
+        REPORTER_ASSERT(reporter, reducedClips.count() == 1);
+        // Clips will be cached based on the generation id. Make sure the gen id is valid.
+        REPORTER_ASSERT(reporter, SkClipStack::kInvalidGenID != reducedGenID);
+    }
+    {
+        SkClipStack stack;
+
+        // Create a clip with following 25.3, 25.3 boxes which are 25 apart:
+        //  A  B
+        //  C  D
+
+        stack.clipDevRect(SkRect::MakeXYWH(0, 0, 25.3, 25.3), SkRegion::kReplace_Op, true);
+        int32_t genIDA = stack.getTopmostGenID();
+        stack.clipDevRect(SkRect::MakeXYWH(50, 0, 25.3, 25.3), SkRegion::kUnion_Op, true);
+        int32_t genIDB = stack.getTopmostGenID();
+        stack.clipDevRect(SkRect::MakeXYWH(0, 50, 25.3, 25.3), SkRegion::kUnion_Op, true);
+        int32_t genIDC = stack.getTopmostGenID();
+        stack.clipDevRect(SkRect::MakeXYWH(50, 50, 25.3, 25.3), SkRegion::kUnion_Op, true);
+        int32_t genIDD = stack.getTopmostGenID();
+
+        // The base test is to test each rect in two ways:
+        // 1) The box dimensions. (Should reduce to "all in", no elements).
+        // 2) A bit over the box dimensions.
+        // In the case 2, test that the generation id is what is expected.
+        // The rects are of fractional size so that case 2 never gets optimized to an empty element
+        // list.
+
+        // Not passing in tighter bounds is tested for consistency.
+        struct GenIDTestCase {
+            SkIRect testBounds;
+            int reducedClipCount;
+            int32_t reducedGenID;
+            GrReducedClip::InitialState initialState;
+            SkIRect tighterBounds; // If this is empty, the query will not pass tighter bounds
+                                   // parameter.
+        };
+
+#define XYWH SkIRect::MakeXYWH
+
+        SkIRect unused;
+        unused.setEmpty();
+        SkIRect stackBounds = XYWH(0, 0, 76, 76);
+
+        GenIDTestCase testCases[] = {
+            // Rect A.
+            { XYWH(0, 0, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, XYWH(0, 0, 25, 25) },
+            { XYWH(0, 0, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, unused },
+            { XYWH(0, 0, 27, 27), 1, genIDA, GrReducedClip::kAllOut_InitialState, XYWH(0, 0, 27, 27)},
+            { XYWH(0, 0, 27, 27), 1, genIDA, GrReducedClip::kAllOut_InitialState, unused },
+
+            // Rect B.
+            { XYWH(50, 0, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, XYWH(50, 0, 25, 25) },
+            { XYWH(50, 0, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, unused },
+            { XYWH(50, 0, 27, 27), 1, genIDB, GrReducedClip::kAllOut_InitialState, XYWH(50, 0, 26, 27) },
+            { XYWH(50, 0, 27, 27), 1, genIDB, GrReducedClip::kAllOut_InitialState, unused },
+
+            // Rect C.
+            { XYWH(0, 50, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, XYWH(0, 50, 25, 25) },
+            { XYWH(0, 50, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, unused },
+            { XYWH(0, 50, 27, 27), 1, genIDC, GrReducedClip::kAllOut_InitialState, XYWH(0, 50, 27, 26) },
+            { XYWH(0, 50, 27, 27), 1, genIDC, GrReducedClip::kAllOut_InitialState, unused },
+
+            // Rect D.
+            { XYWH(50, 50, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, unused },
+            { XYWH(50, 50, 25, 25), 0, SkClipStack::kWideOpenGenID, GrReducedClip::kAllIn_InitialState, XYWH(50, 50, 25, 25)},
+            { XYWH(50, 50, 27, 27), 1, genIDD, GrReducedClip::kAllOut_InitialState, unused },
+            { XYWH(50, 50, 27, 27), 1, genIDD, GrReducedClip::kAllOut_InitialState,  XYWH(50, 50, 26, 26)},
+
+            // Other tests:
+            { XYWH(0, 0, 100, 100), 4, genIDD, GrReducedClip::kAllOut_InitialState, unused },
+            { XYWH(0, 0, 100, 100), 4, genIDD, GrReducedClip::kAllOut_InitialState, stackBounds },
+
+            // Rect in the middle, touches none.
+            { XYWH(26, 26, 24, 24), 0, SkClipStack::kEmptyGenID, GrReducedClip::kAllOut_InitialState, unused },
+            { XYWH(26, 26, 24, 24), 0, SkClipStack::kEmptyGenID, GrReducedClip::kAllOut_InitialState, XYWH(26, 26, 24, 24) },
+
+            // Rect in the middle, touches all the rects. GenID is the last rect.
+            { XYWH(24, 24, 27, 27), 4, genIDD, GrReducedClip::kAllOut_InitialState, unused },
+            { XYWH(24, 24, 27, 27), 4, genIDD, GrReducedClip::kAllOut_InitialState, XYWH(24, 24, 27, 27) },
+        };
+
+#undef XYWH
+
+        for (size_t i = 0; i < SK_ARRAY_COUNT(testCases); ++i) {
+            GrReducedClip::ElementList reducedClips;
+            int32_t reducedGenID;
+            GrReducedClip::InitialState initial;
+            SkIRect tightBounds;
+
+            GrReducedClip::ReduceClipStack(stack,
+                                           testCases[i].testBounds,
+                                           &reducedClips,
+                                           &reducedGenID,
+                                           &initial,
+                                           testCases[i].tighterBounds.isEmpty() ? NULL : &tightBounds);
+
+            REPORTER_ASSERT(reporter, reducedClips.count() == testCases[i].reducedClipCount);
+            SkASSERT(reducedClips.count() == testCases[i].reducedClipCount);
+            REPORTER_ASSERT(reporter, reducedGenID == testCases[i].reducedGenID);
+            SkASSERT(reducedGenID == testCases[i].reducedGenID);
+            REPORTER_ASSERT(reporter, initial == testCases[i].initialState);
+            SkASSERT(initial == testCases[i].initialState);
+            if (!testCases[i].tighterBounds.isEmpty()) {
+                REPORTER_ASSERT(reporter, tightBounds == testCases[i].tighterBounds);
+                SkASSERT(tightBounds == testCases[i].tighterBounds);
+            }
+        }
+    }
+}
+
+static void test_reduced_clip_stack_no_aa_crash(skiatest::Reporter* reporter) {
+    SkClipStack stack;
+    stack.clipDevRect(SkIRect::MakeXYWH(0, 0, 100, 100), SkRegion::kReplace_Op);
+    stack.clipDevRect(SkIRect::MakeXYWH(0, 0, 50, 50), SkRegion::kReplace_Op);
+    SkIRect inflatedIBounds = SkIRect::MakeXYWH(0, 0, 100, 100);
+
+    GrReducedClip::ElementList reducedClips;
+    int32_t reducedGenID;
+    GrReducedClip::InitialState initial;
+    SkIRect tightBounds;
+
+    // At the time, this would crash.
+    GrReducedClip::ReduceClipStack(stack,
+                                   inflatedIBounds,
+                                   &reducedClips,
+                                   &reducedGenID,
+                                   &initial,
+                                   &tightBounds);
+
+    REPORTER_ASSERT(reporter, 0 == reducedClips.count());
+}
+
 #endif
 ///////////////////////////////////////////////////////////////////////////////////////////////////
 
@@ -1034,6 +1201,8 @@ static void TestClipStack(skiatest::Reporter* reporter) {
     test_quickContains(reporter);
 #if SK_SUPPORT_GPU
     test_reduced_clip_stack(reporter);
+    test_reduced_clip_stack_genid(reporter);
+    test_reduced_clip_stack_no_aa_crash(reporter);
 #endif
 }