doc: remove preformatted nroff pages

From now on, we should edit the rst source.

17 files changed, 0 insertions, 1886 deletions

diff --git a/man/.gitignore b/man/.gitignore
deleted file mode 100644
index 26ead201..00000000
--- a/man/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# ignore gzipped man pages
-*.[0-9].gz
diff --git a/man/Makefile b/man/Makefile
deleted file mode 100644
index fa25832e..00000000
--- a/man/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all:
-	$(MAKE) -C .. all
-
-.DEFAULT:
-	$(MAKE) -C .. $@
diff --git a/man/man1/notmuch-compact.1 b/man/man1/notmuch-compact.1
deleted file mode 100644
index ea6218fb..00000000
--- a/man/man1/notmuch-compact.1
+++ /dev/null
@@ -1,62 +0,0 @@
-.TH NOTMUCH-COMPACT 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-compact \- compact the notmuch database
-.SH SYNOPSIS
-
-.B notmuch compact
-.RI "[ --quiet ]"
-.RI "[ --backup=<" directory "> ]"
-
-.SH DESCRIPTION
-
-The
-.B compact
-command can be used to compact the notmuch database. This can both reduce
-the space required by the database and improve lookup performance.
-
-The compacted database is built in a temporary directory and is later
-moved into the place of the origin database. The original uncompacted
-database is discarded, unless the
-.BR "\-\-backup=" <directory>
-option is used.
-
-Note that the database write lock will be held during the compaction
-process (which may be quite long) to protect data integrity.
-
-Supported options for
-.B compact
-include
-
-.RS 4
-.TP 4
-.BR "\-\-backup=" <directory>
-
-Save the current database to the given directory before replacing it
-with the compacted database. The backup directory must not exist and
-it must reside on the same mounted filesystem as the current database.
-
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-quiet
-
-Do not report database compaction progress to stdout.
-
-.RE
-
-.RE
-.SH ENVIRONMENT
-The following environment variables can be used to control the
-behavior of notmuch.
-.TP
-.B NOTMUCH_CONFIG
-Specifies the location of the notmuch configuration file. Notmuch will
-use ${HOME}/.notmuch\-config if this variable is not set.
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-count\fR(1), \fBnotmuch-dump\fR(1),
-\fBnotmuch-hooks\fR(5), \fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-config.1 b/man/man1/notmuch-config.1
deleted file mode 100644
index 00a420f9..00000000
--- a/man/man1/notmuch-config.1
+++ /dev/null
@@ -1,158 +0,0 @@
-.TH NOTMUCH-CONFIG 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-config \- access notmuch configuration file
-.SH SYNOPSIS
-
-.B notmuch config get
-.RI  "<" section ">.<" item ">"
-
-.B notmuch config set
-.RI  "<" section ">.<" item "> [" value " ...]"
-
-.B notmuch config list
-
-.SH DESCRIPTION
-
-The
-.B config
-command can be used to get or set settings in the notmuch
-configuration file.
-
-.RS 4
-.TP 4
-.B get
-The value of the specified configuration item is printed to stdout. If
-the item has multiple values (it is a list), each value is separated
-by a newline character.
-.RE
-
-.RS 4
-.TP 4
-.B set
-The specified configuration item is set to the given value. To specify
-a multiple-value item (a list), provide each value as a separate
-command-line argument.
-
-If no values are provided, the specified configuration item will be
-removed from the configuration file.
-.RE
-
-.RS 4
-.TP 4
-.B list
-Every configuration item is printed to stdout, each on a separate line
-of the form:
-
-.RI  "" section "." item "=" value
-
-No additional whitespace surrounds the dot or equals sign characters. In a
-multiple-value item (a list), the values are separated by semicolon characters.
-.RE
-
-The available configuration items are described below.
-
-.RS 4
-.TP 4
-.B database.path
-The top-level directory where your mail currently exists and to where
-mail will be delivered in the future. Files should be individual email
-messages. Notmuch will store its database within a sub-directory of
-the path configured here named
-.BR ".notmuch".
-.RE
-
-.RS 4
-.TP 4
-.B user.name
-Your full name.
-.RE
-
-.RS 4
-.TP 4
-.B user.primary_email
-Your primary email address.
-.RE
-
-.RS 4
-.TP 4
-.B user.other_email
-A list of other email addresses at which you receive email.
-.RE
-
-.RS 4
-.TP 4
-.B new.tags
-A list of tags that will be added to all messages incorporated by
-.BR "notmuch new".
-.RE
-
-.RS 4
-.TP 4
-.B new.ignore
-A list of file and directory names, without path, that will not be
-searched for messages by
-.BR "notmuch new".
-All the files and directories matching any of the names specified here
-will be ignored, regardless of the location in the mail store
-directory hierarchy.
-.RE
-
-.RS 4
-.TP 4
-.B search.exclude_tags
-A list of tags that will be excluded from search results by
-default. Using an excluded tag in a query will override that
-exclusion.
-.RE
-
-.RS 4
-.TP 4
-.B maildir.synchronize_flags
-If true, then the following maildir flags (in message filenames) will
-be synchronized with the corresponding notmuch tags:
-
-  Flag    Tag
-  ----    -------
-  D       draft
-  F       flagged
-  P       passed
-  R       replied
-  S       unread (added when 'S' flag is not present)
-
-The
-.B notmuch new
-command will notice flag changes in filenames and update tags, while
-the
-.B notmuch tag
-and
-.B notmuch restore
-commands will notice tag changes and update flags in filenames.
-
-If there have been any changes in the maildir (new messages added, old
-ones removed or renamed, maildir flags changed, etc.), it is advisable
-to run
-.B notmuch new
-before
-.B notmuch tag
-or
-.B notmuch restore
-commands to ensure the tag changes are properly synchronized to the
-maildir flags, as the commands expect the database and maildir to be
-in sync.
-.RE
-
-.RE
-.SH ENVIRONMENT
-The following environment variables can be used to control the
-behavior of notmuch.
-.TP
-.B NOTMUCH_CONFIG
-Specifies the location of the notmuch configuration file. Notmuch will
-use ${HOME}/.notmuch\-config if this variable is not set.
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-count\fR(1), \fBnotmuch-dump\fR(1),
-\fBnotmuch-hooks\fR(5), \fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-count.1 b/man/man1/notmuch-count.1
deleted file mode 100644
index 562dde15..00000000
--- a/man/man1/notmuch-count.1
+++ /dev/null
@@ -1,86 +0,0 @@
-.TH NOTMUCH-COUNT 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-count \- count messages matching the given search terms
-.SH SYNOPSIS
-
-.B notmuch count
-.RI  [ options "... ] <" search-term ">..."
-
-.SH DESCRIPTION
-
-Count messages matching the search terms.
-
-The number of matching messages (or threads) is output to stdout.
-
-With no search terms, a count of all messages (or threads) in the database will
-be displayed.
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for <search-terms>.
-
-Supported options for
-.B count
-include
-.RS 4
-.TP 4
-.B \-\-output=(messages|threads|files)
-
-.RS 4
-.TP 4
-.B messages
-
-Output the number of matching messages. This is the default.
-.RE
-.RS 4
-.TP 4
-.B threads
-
-Output the number of matching threads.
-.RE
-.RS 4
-.TP 4
-.B files
-
-Output the number of files associated with matching messages. This may
-be bigger than the number of matching messages due to duplicates
-(i.e. multiple files having the same message-id).
-.RE
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-exclude=(true|false)
-
-Specify whether to omit messages matching search.tag_exclude from the
-count (the default) or not.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-batch
-
-Read queries from a file (stdin by default), one per line, and output
-the number of matching messages (or threads) to stdout, one per
-line. On an empty input line the count of all messages (or threads) in
-the database will be output. This option is not compatible with
-specifying search terms on the command line.
-.RE
-
-.RS 4
-.TP 4
-.BR "\-\-input=" <filename>
-
-Read input from given file, instead of from stdin. Implies
-.BR --batch .
-.RE
-
-.RE
-.RE
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-dump\fR(1),
-\fBnotmuch-hooks\fR(5), \fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-dump.1 b/man/man1/notmuch-dump.1
deleted file mode 100644
index 16e72eb0..00000000
--- a/man/man1/notmuch-dump.1
+++ /dev/null
@@ -1,100 +0,0 @@
-.TH NOTMUCH-DUMP 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-dump \- creates a plain-text dump of the tags of each message
-
-.SH SYNOPSIS
-
-.B "notmuch dump"
-.RB  [ "\-\-format=(sup|batch-tag)"  "] [--]"
-.RI "[ --output=<" filename "> ] [--]"
-.RI "[ <" search-term ">...]"
-
-.SH DESCRIPTION
-
-Dump tags for messages matching the given search terms.
-
-Output is to the given filename, if any, or to stdout.
-
-These tags are the only data in the notmuch database that can't be
-recreated from the messages themselves.  The output of notmuch dump is
-therefore the only critical thing to backup (and much more friendly to
-incremental backup than the native database files.)
-
-.TP 4
-.B \-\-format=(sup|batch-tag)
-
-Notmuch restore supports two plain text dump formats, both with one message-id
-per line, followed by a list of tags.
-
-.RS 4
-.TP 4
-.B batch-tag
-
-The default
-.B batch-tag
-dump format is intended to more robust against malformed message-ids
-and tags containing whitespace or non-\fBascii\fR(7) characters.
-Each line has the form
-
-.RS 4
-.RI "+<" "encoded-tag" "> " "" "+<" "encoded-tag" "> ... -- " "" " id:<" quoted-message-id >
-
-Tags are hex-encoded by replacing every byte not matching the regex
-.B [A-Za-z0-9@=.,_+-]
-with
-.B %nn
-where nn is the two digit hex encoding.  The message ID is a valid Xapian
-query, quoted using Xapian boolean term quoting rules: if the ID contains
-whitespace or a close paren or starts with a double quote, it must be
-enclosed in double quotes and double quotes inside the ID must be doubled.
-The astute reader will notice this is a special case of the batch input
-format for \fBnotmuch-tag\fR(1); note that the single message-id query is
-mandatory for \fBnotmuch-restore\fR(1).
-
-.RE
-.RE
-
-.RS 4
-.TP 4
-.B sup
-
-The
-.B sup
-dump file format is specifically chosen to be
-compatible with the format of files produced by sup-dump.
-So if you've previously been using sup for mail, then the
-.B "notmuch restore"
-command provides you a way to import all of your tags (or labels as
-sup calls them).
-Each line has the following form
-
-.RS 4
-.RI < message-id >
-.B (
-.RI < tag "> ..."
-.B )
-
-with zero or more tags are separated by spaces. Note that (malformed)
-message-ids may contain arbitrary non-null characters. Note also
-that tags with spaces will not be correctly restored with this format.
-
-.RE
-
-.RE
-
-
-With no search terms, a dump of all messages in the database will be
-generated.  A "--" argument instructs notmuch that the
-remaining arguments are search terms.
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for <search-terms>.
-
-.RE
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-hooks\fR(5), \fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-insert.1 b/man/man1/notmuch-insert.1
deleted file mode 100644
index 8ce8413e..00000000
--- a/man/man1/notmuch-insert.1
+++ /dev/null
@@ -1,75 +0,0 @@
-.TH NOTMUCH-INSERT 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-insert \- add a message to the maildir and notmuch database
-.SH SYNOPSIS
-
-.B notmuch insert
-.RI "[" options "]"
-.RI "[ +<" tag> "|\-<" tag "> ... ]"
-
-.SH DESCRIPTION
-
-.B notmuch insert
-reads a message from standard input
-and delivers it into the maildir directory given by configuration option
-.BR database.path ,
-then incorporates the message into the notmuch database.
-It is an alternative to using a separate tool to deliver
-the message then running
-.B notmuch new
-afterwards.
-
-The new message will be tagged with the tags specified by the
-.B new.tags
-configuration option, then by operations specified on the command-line:
-tags prefixed by '+' are added while
-those prefixed by '\-' are removed.
-
-If the new message is a duplicate of an existing message in the database
-(it has same Message-ID), it will be added to the maildir folder and
-notmuch database, but the tags will not be changed.
-
-Option arguments must appear before any tag operation arguments.
-Supported options for
-.B insert
-include
-.RS 4
-.TP 4
-.BI "--folder=<" folder ">"
-
-Deliver the message to the specified folder,
-relative to the top-level directory given by the value of
-\fBdatabase.path\fR.
-The default is to deliver to the top-level directory.
-
-.RE
-
-.RS 4
-.TP 4
-.B "--create-folder"
-
-Try to create the folder named by the
-.B "--folder"
-option, if it does not exist.
-Otherwise the folder must already exist for mail
-delivery to succeed.
-
-.RE
-.SH EXIT STATUS
-
-This command returns exit status 0 if the message was successfully
-added to the mail directory, even if the message could not be indexed
-and added to the notmuch database.  In the latter case, a warning will
-be printed to standard error but the message file will be left on disk.
-
-If the message could not be written to disk then a non-zero exit
-status is returned.
-
-.RE
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5), \fBnotmuch-reply\fR(1),
-\fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-new.1 b/man/man1/notmuch-new.1
deleted file mode 100644
index 7e719262..00000000
--- a/man/man1/notmuch-new.1
+++ /dev/null
@@ -1,75 +0,0 @@
-.TH NOTMUCH-NEW 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-new \- incorporate new mail into the notmuch database
-.SH SYNOPSIS
-
-.B notmuch new
-.RB "[" --no-hooks "]"
-
-.SH DESCRIPTION
-
-Find and import any new messages to the database.
-
-The
-.B new
-command scans all sub-directories of the database, performing
-full-text indexing on new messages that are found. Each new message
-will automatically be tagged with both the
-.BR inbox " and " unread
-tags.
-
-You should run
-.B "notmuch new"
-once after first running
-.B "notmuch setup"
-to create the initial database. The first run may take a long time if
-you have a significant amount of mail (several hundred thousand
-messages or more). Subsequently, you should run
-.B "notmuch new"
-whenever new mail is delivered and you wish to incorporate it into the
-database. These subsequent runs will be much quicker than the initial
-run.
-
-Invoking
-.B notmuch
-with no command argument will run
-.B new
-if
-.B "notmuch setup"
-has previously been completed, but
-.B "notmuch new"
-has not previously been run.
-
-.B "notmuch new"
-updates tags according to maildir flag changes if the
-.B "maildir.synchronize_flags"
-configuration option is enabled. See \fBnotmuch-config\fR(1) for
-details.
-
-The
-.B new
-command supports hooks. See  \fBnotmuch-hooks(5)\fR
-for more details on hooks.
-
-Supported options for
-.B new
-include
-.RS 4
-.TP 4
-.BR \-\-no\-hooks
-
-Prevents hooks from being run.
-.RE
-.RS 4
-.TP 4
-.BR \-\-quiet
-Do not print progress or results.
-.RE
-.RE
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5), \fBnotmuch-insert\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-reply.1 b/man/man1/notmuch-reply.1
deleted file mode 100644
index 93f90673..00000000
--- a/man/man1/notmuch-reply.1
+++ /dev/null
@@ -1,133 +0,0 @@
-.TH NOTMUCH-REPLY 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-reply \- constructs a reply template for a set of messages
-
-.SH SYNOPSIS
-
-.B notmuch reply
-.RI "[" options "...] <" search-term ">..."
-
-.SH DESCRIPTION
-
-Constructs a reply template for a set of messages.
-
-To make replying to email easier,
-.B notmuch reply
-takes an existing set of messages and constructs a suitable mail
-template. The Reply-to: header (if any, otherwise From:) is used for
-the To: address. Unless
-.BR \-\-reply-to=sender
-is specified, values from the To: and Cc: headers are copied, but not
-including any of the current user's email addresses (as configured in
-primary_mail or other_email in the .notmuch\-config file) in the
-recipient list.
-
-It also builds a suitable new subject, including Re: at the front (if
-not already present), and adding the message IDs of the messages being
-replied to to the References list and setting the In\-Reply\-To: field
-correctly.
-
-Finally, the original contents of the emails are quoted by prefixing
-each line with '> ' and included in the body.
-
-The resulting message template is output to stdout.
-
-Supported options for
-.B reply
-include
-.RS
-.TP 4
-.BR \-\-format= ( default | json | sexp | headers\-only )
-.RS
-.TP 4
-.BR default
-Includes subject and quoted message body as an RFC 2822 message.
-.TP
-.BR json
-Produces JSON output containing headers for a reply message and the
-contents of the original message. This output can be used by a client
-to create a reply message intelligently.
-.TP
-.BR sexp
-Produces S-Expression output containing headers for a reply message and
-the contents of the original message. This output can be used by a client
-to create a reply message intelligently.
-.TP
-.BR headers\-only
-Only produces In\-Reply\-To, References, To, Cc, and Bcc headers.
-.RE
-.RE
-
-.RS
-.TP 4
-.BR \-\-format-version=N
-
-Use the specified structured output format version.  This is intended
-for programs that invoke \fBnotmuch\fR(1) internally.  If omitted, the
-latest supported version will be used.
-.RE
-
-.RS
-.TP 4
-.BR \-\-reply\-to= ( all | sender )
-.RS
-.TP 4
-.BR all " (default)"
-Replies to all addresses.
-.TP 4
-.BR sender
-Replies only to the sender. If replying to user's own message
-(Reply-to: or From: header is one of the user's configured email
-addresses), try To:, Cc:, and Bcc: headers in this order, and copy
-values from the first that contains something other than only the
-user's addresses.
-.RE
-.RE
-.RS
-.TP 4
-.B \-\-decrypt
-
-Decrypt any MIME encrypted parts found in the selected content
-(ie. "multipart/encrypted" parts). Status of the decryption will be
-reported (currently only supported with --format=json and
---format=sexp) and on successful decryption the multipart/encrypted
-part will be replaced by the decrypted content.
-
-Decryption expects a functioning \fBgpg-agent\fR(1) to provide any
-needed credentials. Without one, the decryption will fail.
-.RE
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for <search-terms>.
-
-Note: It is most common to use
-.B "notmuch reply"
-with a search string matching a single message, (such as
-id:<message-id>), but it can be useful to reply to several messages at
-once. For example, when a series of patches are sent in a single
-thread, replying to the entire thread allows for the reply to comment
-on issues found in multiple patches. The default format supports
-replying to multiple messages at once, but the JSON and S-Expression
-formats do not.
-.RE
-.RE
-
-.SH EXIT STATUS
-
-This command supports the following special exit status codes
-
-.TP
-.B 20
-The requested format version is too old.
-.TP
-.B 21
-The requested format version is too new.
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-restore.1 b/man/man1/notmuch-restore.1
deleted file mode 100644
index 4cb02e3e..00000000
--- a/man/man1/notmuch-restore.1
+++ /dev/null
@@ -1,91 +0,0 @@
-.TH NOTMUCH-RESTORE 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-restore \- restores the tags from the given file (see notmuch dump)
-
-.SH SYNOPSIS
-
-.B "notmuch restore"
-.RB [ "--accumulate" ]
-.RB [ "--format=(auto|batch-tag|sup)" ]
-.RI "[ --input=<" filename "> ]"
-
-.SH DESCRIPTION
-
-Restores the tags from the given file (see
-.BR "notmuch dump" ")."
-
-The input is read from the given filename, if any, or from stdin.
-
-
-Supported options for
-.B restore
-include
-.RS 4
-.TP 4
-.B \-\-accumulate
-
-The union of the existing and new tags is applied, instead of
-replacing each message's tags as they are read in from the dump file.
-
-.RE
-.RS 4
-.TP 4
-.B \-\-format=(sup|batch-tag|auto)
-
-Notmuch restore supports two plain text dump formats, with each line
-specifying a message-id and a set of tags.
-For details of the actual formats, see \fBnotmuch-dump\fR(1).
-
-.RS 4
-.TP 4
-.B sup
-
-The
-.B sup
-dump file format is specifically chosen to be
-compatible with the format of files produced by sup-dump.
-So if you've previously been using sup for mail, then the
-.B "notmuch restore"
-command provides you a way to import all of your tags (or labels as
-sup calls them).
-
-.RE
-.RS 4
-.TP 4
-.B batch-tag
-
-The
-.B batch-tag
-dump format is intended to more robust against malformed message-ids
-and tags containing whitespace or non-\fBascii\fR(7) characters.  See
-\fBnotmuch-dump\fR(1) for details on this format.
-
-.B "notmuch restore"
-updates the maildir flags according to tag changes if the
-.B "maildir.synchronize_flags"
-configuration option is enabled. See \fBnotmuch-config\fR(1) for
-details.
-
-.RE
-
-.RS 4
-.TP 4
-.B auto
-
-This option (the default) tries to guess the format from the
-input. For correctly formed input in either supported format, this
-heuristic, based the fact that batch-tag format contains no parentheses,
-should be accurate.
-
-.RE
-
-.RE
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-search.1 b/man/man1/notmuch-search.1
deleted file mode 100644
index 55a81e79..00000000
--- a/man/man1/notmuch-search.1
+++ /dev/null
@@ -1,199 +0,0 @@
-.TH NOTMUCH-SEARCH 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-search \- search for messages matching the given search terms
-.SH SYNOPSIS
-
-.B notmuch search
-.RI  [  options "...] <" search-term ">..."
-
-.SH DESCRIPTION
-
-Search for messages matching the given search terms, and display as
-results the threads containing the matched messages.
-
-The output consists of one line per thread, giving a thread ID, the
-date of the newest (or oldest, depending on the sort option) matched
-message in the thread, the number of matched messages and total
-messages in the thread, the names of all participants in the thread,
-and the subject of the newest (or oldest) message.
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for <search-terms>.
-
-Supported options for
-.B search
-include
-.RS 4
-.TP 4
-.BR \-\-format= ( json | sexp | text | text0 )
-
-Presents the results in either JSON, S-Expressions, newline character
-separated plain-text (default), or null character separated plain-text
-(compatible with \fBxargs\fR(1) -0 option where available).
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-format-version=N
-
-Use the specified structured output format version.  This is intended
-for programs that invoke \fBnotmuch\fR(1) internally.  If omitted, the
-latest supported version will be used.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-output=(summary|threads|messages|files|tags)
-
-.RS 4
-.TP 4
-.B summary
-
-Output a summary of each thread with any message matching the search
-terms. The summary includes the thread ID, date, the number of
-messages in the thread (both the number matched and the total number),
-the authors of the thread and the subject.
-.RE
-.RS 4
-.TP 4
-.B threads
-
-Output the thread IDs of all threads with any message matching the
-search terms, either one per line (\-\-format=text), separated by null
-characters (\-\-format=text0), as a JSON array (\-\-format=json), or
-an S-Expression list (\-\-format=sexp).
-.RE
-.RS 4
-.TP 4
-.B messages
-
-Output the message IDs of all messages matching the search terms,
-either one per line (\-\-format=text), separated by null characters
-(\-\-format=text0), as a JSON array (\-\-format=json), or as an
-S-Expression list (\-\-format=sexp).
-.RE
-.RS 4
-.TP 4
-.B files
-
-Output the filenames of all messages matching the search terms, either
-one per line (\-\-format=text), separated by null characters
-(\-\-format=text0), as a JSON array (\-\-format=json), or as an
-S-Expression list (\-\-format=sexp).
-
-Note that each message may have multiple filenames associated with it.
-All of them are included in the output, unless limited with the
-\-\-duplicate=N option.
-.RE
-.RS 4
-.TP 4
-.B tags
-
-Output all tags that appear on any message matching the search terms,
-either one per line (\-\-format=text), separated by null characters
-(\-\-format=text0), as a JSON array (\-\-format=json), or as an
-S-Expression list (\-\-format=sexp).
-.RE
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-sort= ( newest\-first | oldest\-first )
-
-This option can be used to present results in either chronological order
-.RB ( oldest\-first )
-or reverse chronological order
-.RB ( newest\-first ).
-
-Note: The thread order will be distinct between these two options
-(beyond being simply reversed). When sorting by
-.B oldest\-first
-the threads will be sorted by the oldest message in each thread, but
-when sorting by
-.B newest\-first
-the threads will be sorted by the newest message in each thread.
-
-By default, results will be displayed in reverse chronological order,
-(that is, the newest results will be displayed first).
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-offset=[\-]N
-
-Skip displaying the first N results. With the leading '\-', start at the Nth
-result from the end.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-limit=N
-
-Limit the number of displayed results to N.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-exclude=(true|false|all|flag)
-
-A message is called "excluded" if it matches at least one tag in
-search.tag_exclude that does not appear explicitly in the search terms.
-This option specifies whether to omit excluded messages in the search
-process.
-
-The default value,
-.BR true ,
-prevents excluded messages from matching the search terms.
-
-.B all
-additionally prevents excluded messages from appearing in displayed
-results, in effect behaving as though the excluded messages do not exist.
-
-.B false
-allows excluded messages to match search terms and appear in displayed
-results. Excluded messages are still marked in the relevant outputs.
-
-.B flag
-only has an effect when
-.BR --output=summary .
-The output is almost identical to
-.BR false ,
-but the "match count" is the number of matching non-excluded messages in the
-thread, rather than the number of matching messages.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-duplicate=N
-
-Effective with
-.BR --output=files ,
-output the Nth filename associated with each message matching the
-query (N is 1-based). If N is greater than the number of files
-associated with the message, don't print anything.
-
-Note that this option is orthogonal with the
-.BR folder:
-search prefix. The prefix matches messages based on filenames. This
-option filters filenames of the matching messages.
-.RE
-
-.SH EXIT STATUS
-
-This command supports the following special exit status codes
-
-.TP
-.B 20
-The requested format version is too old.
-.TP
-.B 21
-The requested format version is too new.
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-setup.1 b/man/man1/notmuch-setup.1
deleted file mode 120000
index 5c78dc87..00000000
--- a/man/man1/notmuch-setup.1
+++ /dev/null
@@ -1 +0,0 @@
-notmuch.1
\ No newline at end of file
diff --git a/man/man1/notmuch-show.1 b/man/man1/notmuch-show.1
deleted file mode 100644
index 7eefdec6..00000000
--- a/man/man1/notmuch-show.1
+++ /dev/null
@@ -1,250 +0,0 @@
-.TH NOTMUCH-SHOW 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-show \- show messages matching the given search terms
-.SH SYNOPSIS
-
-.B notmuch show
-.RI "[" options "...] <" search-term ">..."
-
-.SH DESCRIPTION
-
-Shows all messages matching the search terms.
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for <search-terms>.
-
-The messages will be grouped and sorted based on the threading (all
-replies to a particular message will appear immediately after that
-message in date order). The output is not indented by default, but
-depth tags are printed so that proper indentation can be performed by
-a post-processor (such as the emacs interface to notmuch).
-
-Supported options for
-.B show
-include
-.RS 4
-.TP 4
-.B \-\-entire\-thread=(true|false)
-
-If true,
-.B notmuch show
-outputs all messages in the thread of any message matching the search
-terms; if false, it outputs only the matching messages. For
-.B --format=json
-and
-.B --format=sexp
-this defaults to true.  For other formats, this defaults to false.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-format=(text|json|sexp|mbox|raw)
-
-.RS 4
-.TP 4
-.BR text " (default for messages)"
-
-The default plain-text format has all text-content MIME parts
-decoded. Various components in the output,
-.RB ( message ", " header ", " body ", " attachment ", and MIME " part ),
-will be delimited by easily-parsed markers. Each marker consists of a
-Control-L character (ASCII decimal 12), the name of the marker, and
-then either an opening or closing brace, ('{' or '}'), to either open
-or close the component. For a multipart MIME message, these parts will
-be nested.
-.RE
-.RS 4
-.TP 4
-.B json
-
-The output is formatted with Javascript Object Notation (JSON). This
-format is more robust than the text format for automated
-processing. The nested structure of multipart MIME messages is
-reflected in nested JSON output. By default JSON output includes all
-messages in a matching thread; that is, by default,
-
-.B \-\-format=json
-sets
-.B "\-\-entire\-thread"
-The caller can disable this behaviour by setting
-.B \-\-entire\-thread=false
-.RE
-.RS 4
-.TP 4
-.B sexp
-
-The output is formatted as an S-Expression (sexp). This
-format is more robust than the text format for automated
-processing. The nested structure of multipart MIME messages is
-reflected in nested S-Expression output. By default,
-S-Expression output includes all messages in a matching thread;
-that is, by default,
-
-.B \-\-format=sexp
-sets
-.B "\-\-entire\-thread"
-The caller can disable this behaviour by setting
-.B \-\-entire\-thread=false
-
-.RE
-.RS 4
-.TP 4
-.B mbox
-
-All matching messages are output in the traditional, Unix mbox format
-with each message being prefixed by a line beginning with "From " and
-a blank line separating each message. Lines in the message content
-beginning with "From " (preceded by zero or more '>' characters) have
-an additional '>' character added. This reversible escaping
-is termed "mboxrd" format and described in detail here:
-
-.nf
-.nh
-http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
-.hy
-.fi
-.
-.RE
-.RS 4
-.TP 4
-.BR raw " (default for a single part, see \-\-part)"
-
-For a message or an attached message part, the original, raw content
-of the email message is output. Consumers of this format should expect
-to implement MIME decoding and similar functions.
-
-For a single part (\-\-part) the raw part content is output after
-performing any necessary MIME decoding.  Note that messages with a
-simple body still have two parts: part 0 is the whole message and part
-1 is the body.
-
-For a multipart part, the part headers and body (including all child
-parts) is output.
-
-The raw format must only be used with search terms matching single
-message.
-.RE
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-format-version=N
-
-Use the specified structured output format version.  This is intended
-for programs that invoke \fBnotmuch\fR(1) internally.  If omitted, the
-latest supported version will be used.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-part=N
-
-Output the single decoded MIME part N of a single message.  The search
-terms must match only a single message.  Message parts are numbered in
-a depth-first walk of the message MIME structure, and are identified
-in the 'json', 'sexp' or 'text' output formats.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-verify
-
-Compute and report the validity of any MIME cryptographic signatures
-found in the selected content (ie. "multipart/signed" parts). Status
-of the signature will be reported (currently only supported with
---format=json and --format=sexp), and the multipart/signed part
-will be replaced by the signed data.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-decrypt
-
-Decrypt any MIME encrypted parts found in the selected content
-(ie. "multipart/encrypted" parts). Status of the decryption will be
-reported (currently only supported with --format=json and
---format=sexp) and on successful decryption the multipart/encrypted
-part will be replaced by the decrypted content.
-
-Decryption expects a functioning \fBgpg-agent\fR(1) to provide any
-needed credentials. Without one, the decryption will fail.
-
-Implies --verify.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-exclude=(true|false)
-
-Specify whether to omit threads only matching search.tag_exclude from
-the search results (the default) or not. In either case the excluded
-message will be marked with the exclude flag (except when output=mbox
-when there is nowhere to put the flag).
-
-If --entire-thread is specified then complete threads are returned
-regardless (with the excluded flag being set when appropriate) but
-threads that only match in an excluded message are not returned when
-.B --exclude=true.
-
-The default is
-.B --exclude=true.
-
-.RE
-
-.RS 4
-.TP 4
-.B \-\-body=(true|false)
-
-If true (the default)
-.B notmuch show
-includes the bodies of the messages in the output; if false,
-bodies are omitted.
-.B --body=false
-is only implemented for the json and sexp formats and it is incompatible with
-.B --part > 0.
-
-This is useful if the caller only needs the headers as body-less
-output is much faster and substantially smaller.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-include-html
-
-Include "text/html" parts as part of the output (currently only supported with
---format=json and --format=sexp).
-By default, unless
-.B --part=N
-is used to select a specific part or
-.B --include-html
-is used to include all "text/html" parts, no part with content type "text/html"
-is included in the output.
-.RE
-
-A common use of
-.B notmuch show
-is to display a single thread of email messages. For this, use a
-search term of "thread:<thread-id>" as can be seen in the first
-column of output from the
-.B notmuch search
-command.
-
-.SH EXIT STATUS
-
-This command supports the following special exit status codes
-
-.TP
-.B 20
-The requested format version is too old.
-.TP
-.B 21
-The requested format version is too new.
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1),
-\fBnotmuch-search\fR(1), \fBnotmuch-search-terms\fR(7),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man1/notmuch-tag.1 b/man/man1/notmuch-tag.1
deleted file mode 100644
index f4fb1f32..00000000
--- a/man/man1/notmuch-tag.1
+++ /dev/null
@@ -1,142 +0,0 @@
-.TH NOTMUCH-TAG 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch-tag \- add/remove tags for all messages matching the search terms
-
-.SH SYNOPSIS
-.B notmuch tag
-.RI [ options "...] +<" tag ">|\-<" tag "> [...] [\-\-] <" search-term "> [...]"
-
-.B notmuch tag
-.RI "--batch"
-.RI "[ --input=<" filename "> ]"
-
-
-.SH DESCRIPTION
-
-Add/remove tags for all messages matching the search terms.
-
-See \fBnotmuch-search-terms\fR(7)
-for details of the supported syntax for
-.RI < search-term >.
-
-Tags prefixed by '+' are added while those prefixed by '\-' are
-removed. For each message, tag changes are applied in the order they
-appear on the command line.
-
-The beginning of the search terms is recognized by the first
-argument that begins with neither '+' nor '\-'. Support for
-an initial search term beginning with '+' or '\-' is provided
-by allowing the user to specify a "\-\-" argument to separate
-the tags from the search terms.
-
-.B "notmuch tag"
-updates the maildir flags according to tag changes if the
-.B "maildir.synchronize_flags"
-configuration option is enabled. See \fBnotmuch-config\fR(1) for
-details.
-
-Supported options for
-.B tag
-include
-.RS 4
-.TP 4
-.BR \-\-remove\-all
-
-Remove all tags from each message matching the search terms before
-applying the tag changes appearing on the command line. This means
-setting the tags of each message to the tags to be added. If there are
-no tags to be added, the messages will have no tags.
-.RE
-
-.RS 4
-.TP 4
-.BR \-\-batch
-
-Read batch tagging operations from a file (stdin by default). This is more
-efficient than repeated
-.B notmuch tag
-invocations. See
-.B TAG FILE FORMAT
-below for the input format. This option is not compatible with
-specifying tagging on the command line.
-.RE
-
-.RS 4
-.TP 4
-.BR "\-\-input=" <filename>
-
-Read input from given file, instead of from stdin. Implies
-.BR --batch .
-
-.SH TAG FILE FORMAT
-
-The input must consist of lines of the format:
-
-.RI "+<" tag ">|\-<" tag "> [...] [\-\-] <" query ">"
-
-Each line is interpreted similarly to
-.B notmuch tag
-command line arguments. The delimiter is one or more spaces ' '. Any
-characters in
-.RI < tag >
-.B may
-be hex-encoded with %NN where NN is the hexadecimal value of the
-character. To hex-encode a character with a multi-byte UTF-8 encoding,
-hex-encode each byte.
-Any spaces in <tag>
-.B must
-be hex-encoded as %20. Any characters that are not
-part of
-.RI  < tag >
-.B must not
-be hex-encoded.
-
-In the future tag:"tag with spaces" style quoting may be supported for
-.RI < tag >
-as well;
-for this reason all double quote characters in
-.RI < tag >
-.B should
-be hex-encoded.
-
-The
-.RI < query >
-should be quoted using Xapian boolean term quoting rules: if a term
-contains whitespace or a close paren or starts with a double quote, it
-must be enclosed in double quotes (not including any prefix) and
-double quotes inside the term must be doubled (see below for
-examples).
-
-Leading and trailing space ' ' is ignored. Empty lines and lines
-beginning with '#' are ignored.
-
-.SS EXAMPLE
-
-The following shows a valid input to batch tagging. Note that only the
-isolated '*' acts as a wildcard. Also note the two different quotings
-of the tag
-.B space in tags
-.
-.RS
-.nf
-+winner *
-+foo::bar%25 -- (One and Two) or (One and tag:winner)
-+found::it -- tag:foo::bar%
-# ignore this line and the next
-
-+space%20in%20tags -- Two
-# add tag '(tags)', among other stunts.
-+crazy{ +(tags) +&are +#possible\e -- tag:"space in tags"
-+match*crazy -- tag:crazy{
-+some_tag -- id:"this is ""nauty)"""
-.fi
-.RE
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1),
-\fBnotmuch-search\fR(1), \fBnotmuch-search-terms\fR(7),
-\fBnotmuch-show\fR(1),
diff --git a/man/man1/notmuch.1 b/man/man1/notmuch.1
deleted file mode 100644
index ba902e16..00000000
--- a/man/man1/notmuch.1
+++ /dev/null
@@ -1,190 +0,0 @@
-.\" notmuch - Not much of an email program, (just index, search and tagging)
-.\"
-.\" Copyright © 2009 Carl Worth
-.\"
-.\" Notmuch is free software: you can redistribute it and/or modify
-.\" it under the terms of the GNU General Public License as published by
-.\" the Free Software Foundation, either version 3 of the License, or
-.\" (at your option) any later version.
-.\"
-.\" Notmuch is distributed in the hope that it will be useful,
-.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\" GNU General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU General Public License
-.\" along with this program.  If not, see http://www.gnu.org/licenses/ .
-.\"
-.\" Author: Carl Worth <cworth@cworth.org>
-.TH NOTMUCH 1 2013-12-30 "Notmuch 0.17"
-.SH NAME
-notmuch \- thread-based email index, search, and tagging
-.SH SYNOPSIS
-.B notmuch
-.RI "[" option " ...] " command  " [" arg " ...]"
-.SH DESCRIPTION
-Notmuch is a command-line based program for indexing, searching,
-reading, and tagging large collections of email messages.
-
-This page describes how to get started using notmuch from the command
-line, and gives a brief overview of the commands available. For more
-information on e.g.
-.B notmuch show
-consult the \fBnotmuch-show\fR(1) man page, also accessible via
-.B notmuch help show
-
-The quickest way to get started with Notmuch is to simply invoke the
-.B notmuch
-command with no arguments, which will interactively guide you through
-the process of indexing your mail.
-.SH NOTE
-While the command-line program
-.B notmuch
-provides powerful functionality, it does not provide the most
-convenient interface for that functionality. More sophisticated
-interfaces are expected to be built on top of either the command-line
-interface, or more likely, on top of the notmuch library
-interface. See http://notmuchmail.org for more about alternate
-interfaces to notmuch. The emacs-based interface to notmuch (available under
-.B emacs/
-in the Notmuch source distribution) is probably the most widely used at
-this time.
-
-.SH OPTIONS
-
-Supported global options for
-.B notmuch
-include
-
-.RS 4
-.TP 4
-.B \-\-help
-
-Print a synopsis of available commands and exit.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-version
-
-Print the installed version of notmuch, and exit.
-.RE
-
-.RS 4
-.TP 4
-.B \-\-config=FILE
-
-Specify the configuration file to use. This overrides any
-configuration file specified by ${NOTMUCH_CONFIG}.
-
-.RE
-
-.SH COMMANDS
-
-
-.SS SETUP
-
-The
-.B notmuch setup
-command is used to configure Notmuch for first use, (or to reconfigure
-it later).
-
-The setup command will prompt for your full name, your primary email
-address, any alternate email addresses you use, and the directory
-containing your email archives. Your answers will be written to a
-configuration file in ${NOTMUCH_CONFIG} (if set) or
-${HOME}/.notmuch-config . This configuration file will be created with
-descriptive comments, making it easy to edit by hand later to change the
-configuration. Or you can run
-.B "notmuch setup"
-again to change the configuration.
-
-The mail directory you specify can contain any number of
-sub-directories and should primarily contain only files with individual
-email messages (eg. maildir or mh archives are perfect). If there are
-other, non-email files (such as indexes maintained by other email
-programs) then notmuch will do its best to detect those and ignore
-them.
-
-Mail storage that uses mbox format, (where one mbox file contains many
-messages), will not work with notmuch. If that's how your mail is
-currently stored, it is recommended you first convert it to maildir
-format with a utility such as mb2md before running
-.B "notmuch setup" .
-
-Invoking
-.B notmuch
-with no command argument will run
-.B setup
-if the setup command has not previously been completed.
-.RE
-
-.SS OTHER COMMANDS
-
-Several of the notmuch commands accept search terms with a common
-syntax. See \fNnotmuch-search-terms\fR(7)
-for more details on the supported syntax.
-
-The
-.BR search ", " show " and " count
-commands are used to query the email database.
-
-The
-.B reply
-command is useful for preparing a template for an email reply.
-
-The
-.B tag
-command is the only command available for manipulating database
-contents.
-
-
-The
-.BR dump " and " restore
-commands can be used to create a textual dump of email tags for backup
-purposes, and to restore from that dump.
-
-The
-.B config
-command can be used to get or set settings in the notmuch
-configuration file.
-
-.SH ENVIRONMENT
-The following environment variables can be used to control the
-behavior of notmuch.
-.TP
-.B NOTMUCH_CONFIG
-Specifies the location of the notmuch configuration file. Notmuch will
-use ${HOME}/.notmuch\-config if this variable is not set.
-
-.TP
-.B NOTMUCH_TALLOC_REPORT
-Location to write a talloc memory usage report. See
-.B talloc_enable_leak_report_full
-in \fBtalloc\fR(3)
-for more information.
-
-.TP
-.B NOTMUCH_DEBUG_QUERY
-If set to a non-empty value, the notmuch library will print (to stderr) Xapian
-queries it constructs.
-
-.SH SEE ALSO
-
-\fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1),
-\fBnotmuch-search\fR(1), \fBnotmuch-search-terms\fR(7),
-\fBnotmuch-show\fR(1), \fBnotmuch-tag\fR(1)
-
-
-The notmuch website:
-.B http://notmuchmail.org
-.SH CONTACT
-Feel free to send questions, comments, or kudos to the notmuch mailing
-list <notmuch@notmuchmail.org> . Subscription is not required before
-posting, but is available from the notmuchmail.org website.
-
-Real-time interaction with the Notmuch community is available via IRC
-(server: irc.freenode.net, channel: #notmuch).
diff --git a/man/man5/notmuch-hooks.5 b/man/man5/notmuch-hooks.5
deleted file mode 100644
index 11c55ddd..00000000
--- a/man/man5/notmuch-hooks.5
+++ /dev/null
@@ -1,48 +0,0 @@
-.TH NOTMUCH-HOOKS 5 2013-12-30 "Notmuch 0.17"
-
-.SH NAME
-notmuch-hooks \- hooks for notmuch
-
-.SH SYNOPSIS
- $DATABASEDIR/.notmuch/hooks/*
-
-.SH DESCRIPTION
-Hooks are scripts (or arbitrary executables or symlinks to such) that notmuch
-invokes before and after certain actions. These scripts reside in
-the .notmuch/hooks directory within the database directory and must have
-executable permissions.
-
-The currently available hooks are described below.
-.RS 4
-.TP 4
-.B pre\-new
-This hook is invoked by the
-.B new
-command before scanning or importing new messages into the database. If this
-hook exits with a non-zero status, notmuch will abort further processing of the
-.B new
-command.
-
-Typically this hook is used for fetching or delivering new mail to be imported
-into the database.
-.RE
-.RS 4
-.TP 4
-.B post\-new
-This hook is invoked by the
-.B new
-command after new messages have been imported into the database and initial tags
-have been applied. The hook will not be run if there have been any errors during
-the scan or import.
-
-Typically this hook is used to perform additional query\-based tagging on the
-imported messages.
-.RE
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1), \fBnotmuch-search\fR(1),
-\fBnotmuch-search-terms\fR(7), \fBnotmuch-show\fR(1),
-\fBnotmuch-tag\fR(1)
diff --git a/man/man7/notmuch-search-terms.7 b/man/man7/notmuch-search-terms.7
deleted file mode 100644
index a768b630..00000000
--- a/man/man7/notmuch-search-terms.7
+++ /dev/null
@@ -1,269 +0,0 @@
-.TH NOTMUCH-SEARCH-TERMS 7 2013-12-30 "Notmuch 0.17"
-
-.SH NAME
-notmuch-search-terms \- syntax for notmuch queries
-
-.SH SYNOPSIS
-
-.B notmuch count
-.RI  [ options... ]
-.RI  < search-term ">..."
-
-.B "notmuch dump"
-.RI "[ <" filename "> ] [--]"
-.RI "[ <" search-term ">...]"
-
-.B notmuch search
-.RI  [  options "...] <" search-term ">..."
-
-.B notmuch show
-.RI "[" options "...] <" search-term ">..."
-
-.B notmuch tag
-.RI  "+<" tag> "|\-<" tag "> [...] [\-\-] <" search-term ">..."
-
-
-.SH DESCRIPTION
-Several notmuch commands accept a common syntax for search terms.
-
-The search terms can consist of free-form text (and quoted phrases)
-which will match all messages that contain all of the given
-terms/phrases in the body, the subject, or any of the sender or
-recipient headers.
-
-As a special case, a search string consisting of exactly a single
-asterisk ("*") will match all messages.
-
-In addition to free text, the following prefixes can be used to force
-terms to match against specific portions of an email, (where
-<brackets> indicate user-supplied values):
-
-	from:<name-or-address>
-
-	to:<name-or-address>
-
-	subject:<word-or-quoted-phrase>
-
-	attachment:<word>
-
-	tag:<tag> (or is:<tag>)
-
-	id:<message-id>
-
-	thread:<thread-id>
-
-	folder:<directory-path>
-
-	date:<since>..<until>
-
-The
-.B from:
-prefix is used to match the name or address of the sender of an email
-message.
-
-The
-.B to:
-prefix is used to match the names or addresses of any recipient of an
-email message, (whether To, Cc, or Bcc).
-
-Any term prefixed with
-.B subject:
-will match only text from the subject of an email. Searching for a
-phrase in the subject is supported by including quotation marks around
-the phrase, immediately following
-.BR subject: .
-
-The
-.B attachment:
-prefix can be used to search for specific filenames (or extensions) of
-attachments to email messages.
-
-For
-.BR tag: " and " is:
-valid tag values include
-.BR inbox " and " unread
-by default for new messages added by
-.B notmuch new
-as well as any other tag values added manually with
-.BR "notmuch tag" .
-
-For
-.BR id: ,
-message ID values are the literal contents of the Message\-ID: header
-of email messages, but without the '<', '>' delimiters.
-
-The
-.B thread:
-prefix can be used with the thread ID values that are generated
-internally by notmuch (and do not appear in email messages). These
-thread ID values can be seen in the first column of output from
-.B "notmuch search"
-
-The
-.B folder:
-prefix can be used to search for email message files that are
-contained within particular directories within the mail store. If the
-same email message has multiple message files associated with it, it's
-sufficient for a match that at least one of the files is contained
-within a matching directory. Only the directory components below the
-top-level mail database path are available to be searched.
-
-The
-.B date:
-prefix can be used to restrict the results to only messages within a
-particular time range (based on the Date: header) with a range syntax
-of:
-
-	date:<since>..<until>
-
-See \fBDATE AND TIME SEARCH\fR below for details on the range
-expression, and supported syntax for <since> and <until> date and time
-expressions.
-
-The time range can also be specified using timestamps with a syntax
-of:
-
-	<initial-timestamp>..<final-timestamp>
-
-Each timestamp is a number representing the number of seconds since
-1970\-01\-01 00:00:00 UTC.
-
-In addition to individual terms, multiple terms can be
-combined with Boolean operators (
-.BR and ", " or ", " not
-, etc.). Each term in the query will be implicitly connected by a
-logical AND if no explicit operator is provided, (except that terms
-with a common prefix will be implicitly combined with OR until we get
-Xapian defect #402 fixed).
-
-Parentheses can also be used to control the combination of the Boolean
-operators, but will have to be protected from interpretation by the
-shell, (such as by putting quotation marks around any parenthesized
-expression).
-
-.SH DATE AND TIME SEARCH
-
-notmuch understands a variety of standard and natural ways of
-expressing dates and times, both in absolute terms ("2012-10-24") and
-in relative terms ("yesterday"). Any number of relative terms can be
-combined ("1 hour 25 minutes") and an absolute date/time can be
-combined with relative terms to further adjust it. A non-exhaustive
-description of the syntax supported for absolute and relative terms is
-given below.
-
-.RS 4
-.TP 4
-.B The range expression
-
-date:<since>..<until>
-
-The above expression restricts the results to only messages from
-<since> to <until>, based on the Date: header.
-
-<since> and <until> can describe imprecise times, such as "yesterday".
-In this case, <since> is taken as the earliest time it could describe
-(the beginning of yesterday) and <until> is taken as the latest time
-it could describe (the end of yesterday). Similarly,
-date:january..february matches from the beginning of January to the
-end of February.
-
-Currently, we do not support spaces in range expressions. You can
-replace the spaces with '_', or (in most cases) '-', or (in some
-cases) leave the spaces out altogether. Examples in this man page use
-spaces for clarity.
-
-Open-ended ranges are supported (since Xapian 1.2.1), i.e. it's
-possible to specify date:..<until> or date:<since>.. to not limit the
-start or end time, respectively. Pre-1.2.1 Xapian does not report an
-error on open ended ranges, but it does not work as expected either.
-
-Entering date:expr without ".." (for example date:yesterday) won't
-work, as it's not interpreted as a range expression at all. You can
-achieve the expected result by duplicating the expr both sides of ".."
-(for example date:yesterday..yesterday).
-.RE
-
-.RS 4
-.TP 4
-.B Relative date and time
-[N|number] (years|months|weeks|days|hours|hrs|minutes|mins|seconds|secs) [...]
-
-All refer to past, can be repeated and will be accumulated.
-
-Units can be abbreviated to any length, with the otherwise ambiguous
-single m being m for minutes and M for months.
-
-Number can also be written out one, two, ..., ten, dozen,
-hundred. Additionally, the unit may be preceded by "last" or "this"
-(e.g., "last week" or "this month").
-
-When combined with absolute date and time, the relative date and time
-specification will be relative from the specified absolute date and
-time.
-
-Examples: 5M2d, two weeks
-.RE
-
-.RS 4
-.TP 4
-.B Supported absolute time formats
-H[H]:MM[:SS] [(am|a.m.|pm|p.m.)]
-
-H[H] (am|a.m.|pm|p.m.)
-
-HHMMSS
-
-now
-
-noon
-
-midnight
-
-Examples: 17:05, 5pm
-.RE
-
-.RS 4
-.TP 4
-.B Supported absolute date formats
-YYYY-MM[-DD]
-
-DD-MM[-[YY]YY]
-
-MM-YYYY
-
-M[M]/D[D][/[YY]YY]
-
-M[M]/YYYY
-
-D[D].M[M][.[YY]YY]
-
-D[D][(st|nd|rd|th)] Mon[thname] [YYYY]
-
-Mon[thname] D[D][(st|nd|rd|th)] [YYYY]
-
-Wee[kday]
-
-Month names can be abbreviated at three or more characters.
-
-Weekday names can be abbreviated at three or more characters.
-
-Examples: 2012-07-31, 31-07-2012, 7/31/2012, August 3
-.RE
-
-.RS 4
-.TP 4
-.B Time zones
-(+|-)HH:MM
-
-(+|-)HH[MM]
-
-Some time zone codes, e.g. UTC, EET.
-.RE
-
-.SH SEE ALSO
-
-\fBnotmuch\fR(1), \fBnotmuch-config\fR(1), \fBnotmuch-count\fR(1),
-\fBnotmuch-dump\fR(1), \fBnotmuch-hooks\fR(5),
-\fBnotmuch-insert\fR(1), \fBnotmuch-new\fR(1),
-\fBnotmuch-reply\fR(1), \fBnotmuch-restore\fR(1),
-\fBnotmuch-search\fR(1), \fBnotmuch-show\fR(1), \fBnotmuch-tag\fR(1)