diff options
author | 2002-07-12 10:27:08 +0000 | |
---|---|---|
committer | 2002-07-12 10:27:08 +0000 | |
commit | 4b56ecf0197be4f73a4c629bb0763f38babc3799 (patch) | |
tree | a72a2fd02a2c6f9be09798af68c5bdd7393b5f27 /libvo/vo_directfb.c | |
parent | aa9e9eccab54937cf282fe8fa196273a4aa7c62f (diff) |
Patch by Jiri Svoboda:
-should not fail if keyboard not present
-preparation for vsync flipping
-card capabilities should be reported better at query format
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@6718 b3059339-0415-0410-9bf9-f77b7e298cf2
Diffstat (limited to 'libvo/vo_directfb.c')
-rw-r--r-- | libvo/vo_directfb.c | 408 |
1 files changed, 336 insertions, 72 deletions
diff --git a/libvo/vo_directfb.c b/libvo/vo_directfb.c index d392783cc3..ebfb99d0cf 100644 --- a/libvo/vo_directfb.c +++ b/libvo/vo_directfb.c @@ -164,15 +164,26 @@ struct vlayer_t { int saturation; int contrast; int hue; + int hwscale; } videolayercaps; // workabout for DirectFB bug static int buggyYV12BitBlt=0; static int memcpyBitBlt=0; +// +static int hwstretchblit=0; #define DIRECTRENDER #ifdef DIRECTRENDER static int dr_enabled=0; static int framelocked=0; #endif +#define FLIPPING +#ifdef FLIPPING +static int do_flipping=0; // turn (on) off flipping - prepared for cmd line switch +static int wait_vsync_after_flip=0; +static int flipping=0; // flipping is active +static int invram=0; // backbuffer in video memory +static int blitperformed=0; // in case of temporary frame we will blit before drawing osd +#endif // primary & frame stuff static int frameallocated=0; static int primaryallocated=0; @@ -193,6 +204,7 @@ if (!modes[index].valid) { modes[index].height=height; modes[index].overx=overx; modes[index].overy=overy; + if (verbose) printf("DirectFB: Mode added %i %i %i\n",width,height,bpp); } if ((modes[index].overy<0)||(modes[index].overx<0)) we_are_under=1; // stored mode is smaller than req mode if (abs(overx*overy)<abs(modes[index].overx * modes[index].overy)) closer=1; // current mode is closer to desired res @@ -203,7 +215,7 @@ if ((closer && (over || we_are_under)) || (we_are_under && over)) { modes[index].height=height; modes[index].overx=overx; modes[index].overy=overy; - if (verbose) printf("DirectFB:Better mode added %i %i %i\n",width,height,bpp); + if (verbose) printf("DirectFB: Better mode added %i %i %i\n",width,height,bpp); }; return DFENUM_OK; @@ -238,9 +250,10 @@ if (verbose) { if (caps & DLCAPS_FLICKER_FILTERING) printf( " - Supports flicker filtering.\n" ); +/* renamed in dfb v. 0.9.13 if (caps & DLCAPS_INTERLACED_VIDEO) printf( " - Can natively display interlaced video.\n" ); - +*/ if (caps & DLCAPS_OPACITY) printf( " - Supports blending based on global alpha factor.\n" ); @@ -289,15 +302,15 @@ if (verbose) printf("DirectFB: Preinit entered\n"); DFBCHECK (DirectFBInit (NULL,NULL)); - if ((directfb_major_version >= 0) && - (directfb_minor_version >= 9) && - (directfb_micro_version >= 7)) + if (!((directfb_major_version <= 0) && + (directfb_minor_version <= 9) && + (directfb_micro_version < 7))) { if (!fb_dev_name && !(fb_dev_name = getenv("FRAMEBUFFER"))) fb_dev_name = "/dev/fb0"; DFBCHECK (DirectFBSetOption ("fbdev",fb_dev_name)); } - // disable YV12 for dfb until 0.9.11 - there is a bug in dfb! should be revised with every dfb version until bug is fixed in dfb. + // use own bitblt for YV12 beacuse bug in dfb till 0.9.11 if ((directfb_major_version <= 0) && (directfb_minor_version <= 9) && (directfb_micro_version <= 11)) { @@ -305,11 +318,32 @@ if (verbose) printf("DirectFB: Preinit entered\n"); if (verbose) printf("DirectFB: Buggy YV12BitBlt!\n"); } +#ifdef FLIPPING + // activate flipping from release 0.9.11 + if ((directfb_major_version <= 0) && + (directfb_minor_version <= 9) && + (directfb_micro_version <= 10)) { + do_flipping=0; + } else { +// (de)activated by default - should be overwritten by cmd line option +// do_flipping=1; + } + // wait for vsync if ver <0.9.13 + if ((directfb_major_version <= 0) && + (directfb_minor_version <= 9) && + (directfb_micro_version <= 12)) { + wait_vsync_after_flip=1; + if (verbose) printf("DirectFB: Manual wait for vsync enabled!\n"); + } else { + wait_vsync_after_flip=0; + } +#endif + // uncomment this if you do not wish to create a new vt for DirectFB - DFBCHECK (DirectFBSetOption ("no-vt-switch","")); +// DFBCHECK (DirectFBSetOption ("no-vt-switch","")); // uncomment this if you want to allow vt switching - DFBCHECK (DirectFBSetOption ("vt-switching","")); +// DFBCHECK (DirectFBSetOption ("vt-switching","")); #ifdef HAVE_DIRECTFB099 // uncomment this if you want to hide gfx cursor (req dfb >=0.9.9) DFBCHECK (DirectFBSetOption ("no-cursor","")); @@ -332,6 +366,8 @@ if (verbose) printf("DirectFB: Preinit entered\n"); videolayeractive=0; } else { + // just to be sure that layer is hidden during config + videolayer->SetOpacity(videolayer,0); // there is an additional layer so test it for YUV formats // some videolayers support RGB formats - not used now @@ -410,6 +446,13 @@ if (verbose) printf("DirectFB: Preinit entered\n"); videolayercaps.saturation=0; }; + // test if layer can change size/position + if (caps & DLCAPS_SCREEN_LOCATION) { + videolayercaps.hwscale=1; + } else { + videolayercaps.hwscale=0; + }; + } @@ -425,6 +468,14 @@ if (verbose) printf("DirectFB: Preinit entered\n"); }; } +// check generic card capabilities (for hw scaling) + { + DFBCardCapabilities caps; + DFBCHECK (dfb->GetCardCapabilities(dfb,&caps)); + if (caps.acceleration_mask & DFXL_STRETCHBLIT) hwstretchblit=1; else hwstretchblit=0; + if (verbose) printf("DirectFB: Card supports hw stretch blit\n"); + } + // just look at RGB things for main layer modes[0].valid=0; modes[1].valid=0; @@ -432,21 +483,31 @@ if (verbose) printf("DirectFB: Preinit entered\n"); modes[3].valid=0; DFBCHECK (dfb->EnumVideoModes(dfb,enum_modes_callback,NULL)); + /* * (Get keyboard) */ - DFBCHECK (dfb->GetInputDevice (dfb, DIDID_KEYBOARD, &keyboard)); + ret = dfb->GetInputDevice (dfb, DIDID_KEYBOARD, &keyboard); + + if (ret==DFB_OK) { + if (verbose) { + printf("DirectFB: Keyboard init OK\n"); + } + } else { + keyboard = NULL; + printf("DirectFB: Keyboard init FAILED\n"); + } /* * Create an input buffer for the keyboard. */ #ifdef HAVE_DIRECTFB099 - DFBCHECK (keyboard->CreateEventBuffer (keyboard, &buffer)); + if (keyboard) DFBCHECK (keyboard->CreateEventBuffer (keyboard, &buffer)); #else - DFBCHECK (keyboard->CreateInputBuffer (keyboard, &buffer)); + if (keyboard) DFBCHECK (keyboard->CreateInputBuffer (keyboard, &buffer)); #endif // just to start with clean ... - buffer->Reset(buffer); + if (buffer) buffer->Reset(buffer); return 0; } @@ -519,15 +580,15 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, }; break; - default: // try all of them in order 16bit 24bit 32bit 8bit - if (modes[1].valid) { - dfb->SetVideoMode(dfb,modes[1].width,modes[1].height,16); - if (verbose) printf("DirectFB: Trying to set videomode [%ix%i 16 bpp]\n",modes[1].width,modes[1].height); - } - else if (modes[2].valid) { + default: // try all of them in order 24bit 16bit 32bit 8bit + if (modes[2].valid) { dfb->SetVideoMode(dfb,modes[2].width,modes[2].height,24); if (verbose) printf("DirectFB: Trying to set videomode [%ix%i 24 bpp]\n",modes[2].width,modes[2].height); } + else if (modes[1].valid) { + dfb->SetVideoMode(dfb,modes[1].width,modes[1].height,16); + if (verbose) printf("DirectFB: Trying to set videomode [%ix%i 16 bpp]\n",modes[1].width,modes[1].height); + } else if (modes[3].valid) { dfb->SetVideoMode(dfb,modes[3].width,modes[3].height,32); if (verbose) printf("DirectFB: Trying to set videomode [%ix%i 32 bpp]\n",modes[3].width,modes[3].height); @@ -636,11 +697,42 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, ret =videolayer->SetConfiguration( videolayer, &dlc ); if (!ret) { if (verbose) printf("DirectFB: SetConfiguration for layer OK\n"); + +#ifdef FLIPPING + // try to set flipping for videolayer + if (do_flipping) { + dlc.flags = DLCONF_BUFFERMODE; + dlc.buffermode = DLBM_BACKVIDEO; + invram = 1; + flipping = 1; + ret =videolayer->SetConfiguration( videolayer, &dlc ); + if (ret!=DFB_OK) { + invram = 0; + if (!((directfb_major_version <= 0) && + (directfb_minor_version <= 9) && + (directfb_micro_version <= 11))) { + + dlc.buffermode = DLBM_BACKSYSTEM; + ret =videolayer->SetConfiguration( videolayer, &dlc ); + if (ret!=DFB_OK) { + flipping = 0; + } + } else { flipping = 0; }; + } + if (verbose) if (flipping) { + printf("DirectFB: SetFlipping for layer: OK (vram=%i)\n",invram); + } else { + printf("DirectFB: SetFlipping for layer: FAILED\n"); + } + } else flipping=0; +#endif ret = videolayer->GetSurface( videolayer, &primary ); if (!ret){ videolayeractive=1; - if (verbose) printf("DirectFB: Get surface for layer OK\n"); + if (verbose) printf("DirectFB: Get surface for layer: OK\n"); primaryallocated=1; + // set videolayer to be visible + videolayer->SetOpacity(videolayer,0xFF); } else { videolayeractive=0; if (videolayer) videolayer->SetOpacity(videolayer,0); @@ -652,9 +744,9 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, } -// for flipping we will use BitBlt not integrated directfb flip +// for flipping we will use BitBlt not integrated directfb flip (if necessary) dsc.flags = DSDESC_CAPS | DSDESC_PIXELFORMAT; - dsc.caps = DSCAPS_PRIMARY | DSCAPS_VIDEOONLY;//| DSCAPS_FLIPPING; + dsc.caps = DSCAPS_PRIMARY /*| DSCAPS_VIDEOONLY*/; switch (format) { case IMGFMT_RGB32: dsc.pixelformat = DSPF_ARGB; source_pixel_size= 4; break; @@ -669,11 +761,69 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, }; if (!videolayeractive) { +#ifdef FLIPPING + if (do_flipping) { + flipping = 1; + invram = 0; + dsc.caps |= DSCAPS_FLIPPING; + ret = dfb->CreateSurface( dfb, &dsc, &primary ); + if (ret!=DFB_OK) { + dsc.caps &= ~DSCAPS_FLIPPING; + DFBCHECK (dfb->CreateSurface( dfb, &dsc, &primary )); + flipping = 0; + } else { + // test flipping again + DFBCHECK (primary->GetCapabilities(primary,&dsc.caps)); + if (!(dsc.caps & DSCAPS_FLIPPING)) { + printf("DirectFB: Error - surface sucesfully created with flipping flag, but doesn't support it.\n"); + flipping = 0; + } else { + // test fliping in real - sometimes flips fails even if shouldn't + DFBResult ret; + ret = primary->Flip(primary,NULL,0); + if (ret!=DFB_OK) { + // recreate surface as non flipping + printf("DirectFB: Error - surface sucesfully created with flipping flag, but test flip failed.\n"); + flipping = 0; + dsc.caps &= ~DSCAPS_FLIPPING; + primary->Release(primary); + DFBCHECK (dfb->CreateSurface( dfb, &dsc, &primary )); + } + + } + } +/* if (verbose) if (flipping) { + printf("DirectFB: Flipping for primary: OK\n"); + } else { + printf("DirectFB: Flipping for primary: FAILED\n"); + } +*/ } else { + flipping = 0; +#endif DFBCHECK (dfb->CreateSurface( dfb, &dsc, &primary )); - if (verbose) printf("DirectFB: Get primary surface OK\n"); +#ifdef FLIPPING + } +#endif + + if (verbose) printf("DirectFB: Get primary surface: OK\n"); + primaryallocated=1; } +#ifdef FLIPPING +// final check for flipping - based on real caps + + DFBCHECK (primary->GetCapabilities(primary,&dsc.caps)); + if (!(dsc.caps & DSCAPS_FLIPPING)) { + printf("DirectFB: Flipping si NOT active.\n"); + flipping = 0; + } else { + printf("DirectFB: Flipping is active.\n"); + flipping = 1; + } +// } +#endif + DFBCHECK (primary->GetSize (primary, &screen_width, &screen_height)); DFBCHECK (primary->GetPixelFormat (primary, &frame_format)); @@ -712,6 +862,7 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, memcpyBitBlt = 0; #endif + // release frame if it is already allocated if (frameallocated) { if (verbose ) printf("DirectFB: Release frame\n"); @@ -719,20 +870,58 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, frameallocated=0; }; +// picture size and position - // prevent from memcpy from videomemory to videomemory -/* if (memcpyBitBlt) { - dsc.caps = DSCAPS_SYSTEMONLY; + aspect_save_orig(in_width,in_height); + aspect_save_prescale(d_width,d_height); + if (videolayeractive) {// try to set pos for YUY2 layer and proper aspect ratio + aspect_save_screenres(10000,10000); + aspect(&out_width,&out_height,A_ZOOM); + + ret = videolayer->SetScreenLocation(videolayer,(1-(float)out_width/10000)/2,(1-(float)out_height/10000)/2,((float)out_width/10000),((float)out_height/10000)); + + xoffset = 0; + yoffset = 0; } else { - dsc.caps = DSCAPS_VIDEOONLY; + // aspect ratio correction for zoom to fullscreen + aspect_save_screenres(screen_width,screen_height); + + if(fs) /* -fs */ + aspect(&out_width,&out_height,A_ZOOM); + else + aspect(&out_width,&out_height,A_NOZOOM); + + + xoffset = (screen_width - out_width) / 2; + yoffset = (screen_height - out_height) / 2; } - ret = dfb->CreateSurface( dfb, &dsc, &frame); - if (ret) { - if (verbose) printf ("DirectFB: Trying do create buffer in system memory (2)\n");*/ + + if (((out_width != in_width) || (out_height != in_height)) && (!videolayeractive)) {stretch = 1;} else stretch=0; //yuy doesn't like strech and should not be needed + +#ifdef FLIPPING + // frame will not be allocated in case of overlay or nonstrech blit on primary + if (flipping && (!stretch)) { + frame = primary; + frameallocated = 0; + if (verbose) printf("DirectFB: Frame is NOT used (flipping is active).\n"); + } else { +#endif + /* dsc.caps = DSCAPS_SYSTEMONLY; + //let dfb decide where frame should be - preparation for AGP support + */ + dsc.flags &=~DSDESC_CAPS; + DFBCHECK (dfb->CreateSurface( dfb, &dsc, &frame)); frameallocated=1; -// } +#ifdef FLIPPING + if (verbose) if (flipping) { + printf("DirectFB: Frame created (flipping&stretch is active).\n"); + } else { + printf("DirectFB: Frame created (flipping is NOT active).\n"); + }; + }; +#endif DFBCHECK (frame->GetPixelFormat (frame, &frame_format)); @@ -780,37 +969,9 @@ static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, if (((format == IMGFMT_YV12) || (format == IMGFMT_YUY2)) && (!videolayeractive)){ yuv2rgb_init(frame_pixel_size * 8,MODE_RGB);}; -// picture size and position - - aspect_save_orig(in_width,in_height); - aspect_save_prescale(d_width,d_height); - if (videolayeractive) {// try to set pos for YUY2 layer and proper aspect ratio - aspect_save_screenres(10000,10000); - aspect(&out_width,&out_height,A_ZOOM); - - ret = videolayer->SetScreenLocation(videolayer,(1-(float)out_width/10000)/2,(1-(float)out_height/10000)/2,((float)out_width/10000),((float)out_height/10000)); - - xoffset = 0; - yoffset = 0; - } else { - // aspect ratio correction for zoom to fullscreen - aspect_save_screenres(screen_width,screen_height); - - if(fs) /* -fs */ - aspect(&out_width,&out_height,A_ZOOM); - else - aspect(&out_width,&out_height,A_NOZOOM); - - - xoffset = (screen_width - out_width) / 2; - yoffset = (screen_height - out_height) / 2; - } - - if (((out_width != in_width) || (out_height != in_height)) && (!videolayeractive)) {stretch = 1;} else stretch=0; //yuy doesn't like strech and should not be needed - if ((verbose)&&(memcpyBitBlt)) printf("DirectFB: Using memcpyBitBlt\n"); #ifdef DIRECTRENDER -//direct rendering is enabled in case of sane buffer and im format +//direct rendering is enabled in case of same buffer and img format if ((format==IMGFMT_RGB32)&&(frame_format ==DSPF_ARGB) || (format==IMGFMT_BGR32)&&(frame_format ==DSPF_ARGB) || (format==IMGFMT_RGB24)&&(frame_format ==DSPF_RGB24) || @@ -847,6 +1008,25 @@ static uint32_t query_format(uint32_t format) // preinit(NULL); if (verbose ) printf("DirectFB: Format query: %s\n",vo_format_name(format)); + + switch (format) { + // primary + case IMGFMT_RGB32: + case IMGFMT_BGR32: + case IMGFMT_RGB24: + case IMGFMT_BGR24: + case IMGFMT_RGB16: + case IMGFMT_BGR16: + case IMGFMT_RGB15: + case IMGFMT_BGR15: if (hwstretchblit) ret |=VFCAP_HWSCALE_UP|VFCAP_HWSCALE_DOWN; + break; + // overlay + case IMGFMT_YUY2: + case IMGFMT_YV12: if (videolayercaps.hwscale) ret |=VFCAP_HWSCALE_UP|VFCAP_HWSCALE_DOWN; + break; + } + + switch (format) { // RGB mode works only if color depth is same as on screen and this driver doesn't know before init @@ -865,19 +1045,21 @@ static uint32_t query_format(uint32_t format) case IMGFMT_BGR15: if (modes[1].valid) return ret; break; case IMGFMT_YUY2: if (videolayerpresent) { + if (videolayercaps.hwscale) ret |=VFCAP_HWSCALE_UP|VFCAP_HWSCALE_DOWN; if (videolayercaps.yuy2) { return ret|VFCAP_CSP_SUPPORTED_BY_HW; - } else { +// disabled - MPlayer will do conversion automatically +/* } else { return ret; - }; +*/ }; }; break; case IMGFMT_YV12: if ((videolayerpresent) && (videolayercaps.i420 || videolayercaps.iv12)) return ret|VFCAP_CSP_SUPPORTED_BY_HW; - else return ret; - break; - // YV12 should work in all cases +// disabled - MPlayer will do conversion automatically +/* else return ret; +*/ break; } return 0; @@ -894,6 +1076,8 @@ static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, void *dst; int pitch; int len; + static IDirectFBSurface *surface = NULL; + #ifdef DIRECTRENDER if(framelocked) { @@ -901,8 +1085,15 @@ static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, framelocked=0; }; #endif +#ifdef FLIPPING + if (flipping && stretch) { + DFBCHECK (primary->Lock(primary,DSLF_WRITE,&dst,&pitch)); + } else { +#endif DFBCHECK (frame->Lock(frame,DSLF_WRITE,&dst,&pitch)); - +#ifdef FLIPPING + } +#endif switch(frame_format) { case DSPF_RGB32: case DSPF_ARGB: @@ -936,7 +1127,15 @@ static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, break; #endif } +#ifdef FLIPPING + if (flipping && stretch) { + DFBCHECK (primary->Unlock(primary)); + } else { +#endif DFBCHECK (frame->Unlock(frame)); +#ifdef FLIPPING + } +#endif } static uint32_t draw_frame(uint8_t *src[]) @@ -1208,6 +1407,8 @@ extern void mplayer_put_key(int code); static void check_events(void) { + if (buffer) { + DFBInputEvent event; //if (verbose) printf ("DirectFB: Check events entered\n"); #ifdef HAVE_DIRECTFB0910 @@ -1259,18 +1460,53 @@ if (buffer->GetEvent(buffer, &event) == DFB_OK) { #endif }; }; +} // empty buffer, because of repeating (keyboard repeat is faster than key handling // and this causes problems during seek) // temporary workabout should be solved in the future -buffer->Reset(buffer); +if (buffer) buffer->Reset(buffer); //if (verbose) printf ("DirectFB: Check events finished\n"); } static void draw_osd(void) { +// if flipping is active we will draw directly to primary +// we will also blit from frame to primary if necessary +#ifdef FLIPPING + if (stretch && flipping) { + DFBRectangle rect; + rect.x=xoffset; + rect.y=yoffset; + rect.w=out_width; + rect.h=out_height; +#ifdef DIRECTRENDER + if(framelocked) { + frame->Unlock(frame); + framelocked=0; + }; +#endif + // lets clear blackborders + primary->SetColor(primary,0,0,0,0); + // top + primary->FillRectangle(primary,0,0,screen_width,yoffset); + // bottom + primary->FillRectangle(primary,0,screen_height-yoffset,screen_width,yoffset); + //left +// primary->FillRectangle(primary,0,yoffset,xoffset,screen_height-2*yoffset); + //right +// primary->FillRectangle(primary,screen_width-xoffset-1,yoffset,xoffset,screen_height-2*yoffset); + + DFBCHECK (primary->StretchBlit(primary,frame,NULL,&rect)); + blitperformed=1; + vo_draw_text(screen_width, screen_height, draw_alpha); + } else { +#endif vo_draw_text(in_width, in_height, draw_alpha); +#ifdef FLIPPING + } +#endif } static void flip_page(void) @@ -1287,7 +1523,11 @@ static void flip_page(void) framelocked=0; }; #endif - if (stretch) { + if (stretch +#ifdef FLIPPING + && (!blitperformed) +#endif + ) { DFBRectangle rect; rect.x=xoffset; rect.y=yoffset; @@ -1295,8 +1535,14 @@ static void flip_page(void) rect.h=out_height; DFBCHECK (primary->StretchBlit(primary,frame,NULL,&rect)); +#ifdef FLIPPING + blitperformed=0; +#endif } else { +#ifdef FLIPPING + if (!flipping) { +#endif #ifdef HAVE_DIRECTFB099 if (!memcpyBitBlt) { #endif @@ -1341,8 +1587,25 @@ static void flip_page(void) primary->Unlock(primary); }; #endif +#ifdef FLIPPING }; -// DFBCHECK (primary->Flip (primary, NULL, DSFLIP_WAITFORSYNC)); +#endif + }; +#ifdef FLIPPING + if (flipping) { + if (videolayeractive && wait_vsync_after_flip) { + DFBCHECK (primary->Flip (primary, NULL, /*DSFLIP_WAITFORSYNC*/0)); + /* workabout for videolayer + flip will take place on next vsync, but pointers are updated instanlty -> + -> decoding goes into "new" buffer which is still displayed -> + -> so wait for vsync to be safe (and have surfaces REALLY flipped) + */ + dfb->WaitForSync(dfb); + } else { + DFBCHECK (primary->Flip (primary, NULL, DSFLIP_WAITFORSYNC)); + }; + }; +#endif } static void uninit(void) @@ -1352,9 +1615,9 @@ static void uninit(void) * (Release) */ if (verbose ) printf("DirectFB: Release buffer\n"); - buffer->Release (buffer); + if (buffer) buffer->Release (buffer); if (verbose ) printf("DirectFB: Release keyboard\n"); - keyboard->Release (keyboard); + if (keyboard) keyboard->Release (keyboard); if (frameallocated) { if (verbose ) printf("DirectFB: Release frame\n"); frame->Release (frame); @@ -1467,8 +1730,9 @@ static uint32_t get_image(mp_image_t *mpi){ // printf("DirectFB: get_image() called\n"); // now we are always in system memory (in this version - mybe will change in future) -// if(mpi->flags&MP_IMGFLAG_READABLE) return VO_FALSE; // slow video ram - +#ifdef FLIPPING + if((mpi->flags&MP_IMGFLAG_READABLE) && invram) return VO_FALSE; // slow video ram +#endif // printf("width=%d vs. pitch=%d, flags=0x%X \n",mpi->width,pitch,mpi->flags); if((mpi->width==pitch/frame_pixel_size) || (mpi->flags&(MP_IMGFLAG_ACCEPT_STRIDE|MP_IMGFLAG_ACCEPT_WIDTH))){ |