diff options
Diffstat (limited to 'tools/doxygen/Doxyfile.c++.internal.orig')
| -rw-r--r-- | tools/doxygen/Doxyfile.c++.internal.orig | 2505 |
1 files changed, 0 insertions, 2505 deletions
diff --git a/tools/doxygen/Doxyfile.c++.internal.orig b/tools/doxygen/Doxyfile.c++.internal.orig deleted file mode 100644 index c214b3d3c8..0000000000 --- a/tools/doxygen/Doxyfile.c++.internal.orig +++ /dev/null @@ -1,2505 +0,0 @@ - - -# Doxyfile 1.8.9.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "GRPC C++" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = 0.15.0-dev - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = doc/ref/c++.internal - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 2 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note: For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = YES - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO, -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. If set to YES, local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO, only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO, these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES, the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will -# append additional text to a page's title, such as Class Reference. If set to -# YES the compound reference will be hidden. -# The default value is: NO. - -HIDE_COMPOUND_REFERENCE= NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo -# list. This list is created by putting \todo commands in the documentation. -# The default value is: YES. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test -# list. This list is created by putting \test commands in the documentation. -# The default value is: YES. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if <section_label> ... \endif and \cond <section_label> -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES, the -# list will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# Configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag is used to specify the files and/or directories that contain -# documented source files. You may enter file names like myfile.cpp or -# directories like /usr/src/myproject. Separate the files or directories with -# spaces. -# Note: If this tag is empty the current directory is searched. - -INPUT = include/grpc++/alarm.h \ -include/grpc++/channel.h \ -include/grpc++/client_context.h \ -include/grpc++/completion_queue.h \ -include/grpc++/create_channel.h \ -include/grpc++/generic/async_generic_service.h \ -include/grpc++/generic/generic_stub.h \ -include/grpc++/grpc++.h \ -include/grpc++/impl/call.h \ -include/grpc++/impl/client_unary_call.h \ -include/grpc++/impl/codegen/core_codegen.h \ -include/grpc++/impl/grpc_library.h \ -include/grpc++/impl/method_handler_impl.h \ -include/grpc++/impl/rpc_method.h \ -include/grpc++/impl/rpc_service_method.h \ -include/grpc++/impl/serialization_traits.h \ -include/grpc++/impl/server_builder_option.h \ -include/grpc++/impl/server_builder_plugin.h \ -include/grpc++/impl/server_initializer.h \ -include/grpc++/impl/service_type.h \ -include/grpc++/impl/sync.h \ -include/grpc++/impl/sync_cxx11.h \ -include/grpc++/impl/sync_no_cxx11.h \ -include/grpc++/impl/thd.h \ -include/grpc++/impl/thd_cxx11.h \ -include/grpc++/impl/thd_no_cxx11.h \ -include/grpc++/security/auth_context.h \ -include/grpc++/security/auth_metadata_processor.h \ -include/grpc++/security/credentials.h \ -include/grpc++/security/server_credentials.h \ -include/grpc++/server.h \ -include/grpc++/server_builder.h \ -include/grpc++/server_context.h \ -include/grpc++/support/async_stream.h \ -include/grpc++/support/async_unary_call.h \ -include/grpc++/support/byte_buffer.h \ -include/grpc++/support/channel_arguments.h \ -include/grpc++/support/config.h \ -include/grpc++/support/slice.h \ -include/grpc++/support/status.h \ -include/grpc++/support/status_code_enum.h \ -include/grpc++/support/string_ref.h \ -include/grpc++/support/stub_options.h \ -include/grpc++/support/sync_stream.h \ -include/grpc++/support/time.h \ -include/grpc++/impl/codegen/async_stream.h \ -include/grpc++/impl/codegen/async_unary_call.h \ -include/grpc++/impl/codegen/call.h \ -include/grpc++/impl/codegen/call_hook.h \ -include/grpc++/impl/codegen/channel_interface.h \ -include/grpc++/impl/codegen/client_context.h \ -include/grpc++/impl/codegen/client_unary_call.h \ -include/grpc++/impl/codegen/completion_queue.h \ -include/grpc++/impl/codegen/completion_queue_tag.h \ -include/grpc++/impl/codegen/config.h \ -include/grpc++/impl/codegen/core_codegen_interface.h \ -include/grpc++/impl/codegen/create_auth_context.h \ -include/grpc++/impl/codegen/grpc_library.h \ -include/grpc++/impl/codegen/method_handler_impl.h \ -include/grpc++/impl/codegen/rpc_method.h \ -include/grpc++/impl/codegen/rpc_service_method.h \ -include/grpc++/impl/codegen/security/auth_context.h \ -include/grpc++/impl/codegen/serialization_traits.h \ -include/grpc++/impl/codegen/server_context.h \ -include/grpc++/impl/codegen/server_interface.h \ -include/grpc++/impl/codegen/service_type.h \ -include/grpc++/impl/codegen/status.h \ -include/grpc++/impl/codegen/status_code_enum.h \ -include/grpc++/impl/codegen/string_ref.h \ -include/grpc++/impl/codegen/stub_options.h \ -include/grpc++/impl/codegen/sync.h \ -include/grpc++/impl/codegen/sync_cxx11.h \ -include/grpc++/impl/codegen/sync_no_cxx11.h \ -include/grpc++/impl/codegen/sync_stream.h \ -include/grpc++/impl/codegen/time.h \ -include/grpc/impl/codegen/byte_buffer.h \ -include/grpc/impl/codegen/byte_buffer_reader.h \ -include/grpc/impl/codegen/compression_types.h \ -include/grpc/impl/codegen/connectivity_state.h \ -include/grpc/impl/codegen/grpc_types.h \ -include/grpc/impl/codegen/propagation_bits.h \ -include/grpc/impl/codegen/status.h \ -include/grpc/impl/codegen/alloc.h \ -include/grpc/impl/codegen/atm.h \ -include/grpc/impl/codegen/atm_gcc_atomic.h \ -include/grpc/impl/codegen/atm_gcc_sync.h \ -include/grpc/impl/codegen/atm_windows.h \ -include/grpc/impl/codegen/log.h \ -include/grpc/impl/codegen/port_platform.h \ -include/grpc/impl/codegen/slice.h \ -include/grpc/impl/codegen/slice_buffer.h \ -include/grpc/impl/codegen/sync.h \ -include/grpc/impl/codegen/sync_generic.h \ -include/grpc/impl/codegen/sync_posix.h \ -include/grpc/impl/codegen/sync_windows.h \ -include/grpc/impl/codegen/time.h \ -<<<<<<< HEAD -include/grpc++/impl/codegen/config.h \ -include/grpc++/impl/codegen/config_protobuf.h \ -include/grpc++/support/config.h \ -include/grpc++/support/config_protobuf.h \ -include/grpc++/impl/codegen/core_codegen.h \ -======= ->>>>>>> d30d4e279c4a63effaa6e912fc00bd4ad96054c7 -src/cpp/client/secure_credentials.h \ -src/cpp/common/secure_auth_context.h \ -src/cpp/server/secure_server_credentials.h \ -src/cpp/client/create_channel_internal.h \ -src/cpp/server/dynamic_thread_pool.h \ -src/cpp/server/thread_pool_interface.h \ -src/cpp/client/secure_credentials.cc \ -src/cpp/common/auth_property_iterator.cc \ -src/cpp/common/secure_auth_context.cc \ -src/cpp/common/secure_channel_arguments.cc \ -src/cpp/common/secure_create_auth_context.cc \ -src/cpp/server/secure_server_credentials.cc \ -src/cpp/client/channel.cc \ -src/cpp/client/client_context.cc \ -src/cpp/client/create_channel.cc \ -src/cpp/client/create_channel_internal.cc \ -src/cpp/client/credentials.cc \ -src/cpp/client/generic_stub.cc \ -src/cpp/client/insecure_credentials.cc \ -src/cpp/common/channel_arguments.cc \ -src/cpp/common/completion_queue.cc \ -src/cpp/common/core_codegen.cc \ -src/cpp/common/rpc_method.cc \ -src/cpp/server/async_generic_service.cc \ -src/cpp/server/create_default_thread_pool.cc \ -src/cpp/server/dynamic_thread_pool.cc \ -src/cpp/server/insecure_server_credentials.cc \ -src/cpp/server/server.cc \ -src/cpp/server/server_builder.cc \ -src/cpp/server/server_context.cc \ -src/cpp/server/server_credentials.cc \ -src/cpp/util/byte_buffer.cc \ -src/cpp/util/slice.cc \ -src/cpp/util/status.cc \ -src/cpp/util/string_ref.cc \ -src/cpp/util/time.cc \ -src/cpp/codegen/codegen_init.cc - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or directories -# that contain example code fragments that are included (see the \include -# command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank all -# files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude commands -# irrespective of the value of the RECURSIVE tag. -# The default value is: NO. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or directories -# that contain images that are to be included in the documentation (see the -# \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# <filter> <input-file> -# -# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - -# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page -# (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. - -USE_MDFILE_AS_MAINPAGE = - -#--------------------------------------------------------------------------- -# Configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will be -# generated. Documented entities will be cross-referenced with these sources. -# -# Note: To get rid of all source code in the generated output, make sure that -# also VERBATIM_HEADERS is set to NO. -# The default value is: NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = YES - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefore more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_DYNAMIC_SECTIONS = NO - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated -# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = NO - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use <access key> + S -# (what the <access key> is depends on the OS and browser, but it is typically -# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down -# key> to jump into the search results window, the results can be navigated -# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel -# the search. The filter options can be selected when the cursor is inside the -# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> -# to select a filter and <Enter> or <escape> to activate or cancel the filter -# option. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There -# are two flavors of web server based searching depending on the EXTERNAL_SEARCH -# setting. When disabled, doxygen will generate a PHP script for searching and -# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing -# and searching needs to be provided by external tools. See the section -# "External Indexing and Searching" for details. -# The default value is: NO. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SERVER_BASED_SEARCH = NO - -# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP -# script for searching. Instead the search results are written to an XML file -# which needs to be processed by an external indexer. Doxygen will invoke an -# external search engine pointed to by the SEARCHENGINE_URL option to obtain the -# search results. -# -# Doxygen ships with an example indexer (doxyindexer) and search engine -# (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). -# -# See the section "External Indexing and Searching" for details. -# The default value is: NO. -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTERNAL_SEARCH = NO - -# The SEARCHENGINE_URL should point to a search engine hosted by a web server -# which will return the search results when EXTERNAL_SEARCH is enabled. -# -# Doxygen ships with an example indexer (doxyindexer) and search engine -# (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SEARCHENGINE_URL = - -# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed -# search data is written to a file for indexing by an external tool. With the -# SEARCHDATA_FILE tag the name of this file can be specified. -# The default file is: searchdata.xml. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SEARCHDATA_FILE = searchdata.xml - -# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the -# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is -# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple -# projects and redirect the results back to the right project. -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTERNAL_SEARCH_ID = - -# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen -# projects other than the one defined by this configuration file, but that are -# all added to the same external search index. Each project needs to have a -# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of -# to a relative location where the documentation can be found. The format is: -# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTRA_SEARCH_MAPPINGS = - -#--------------------------------------------------------------------------- -# Configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. -# The default value is: YES. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: latex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. -# -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate -# index for LaTeX. -# The default file is: makeindex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX -# documents. This may be useful for small projects and may help to save some -# trees in general. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used by the -# printer. -# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x -# 14 inches) and executive (7.25 x 10.5 inches). -# The default value is: a4. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -PAPER_TYPE = a4 - -# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times -# If left blank no extra packages will be included. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. -# -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See -# LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_FOOTER = - -# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# LaTeX style sheets that are included after the standard style sheets created -# by doxygen. Using this option one can overrule certain style aspects. Doxygen -# will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_EXTRA_STYLESHEET = - -# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the LATEX_OUTPUT output -# directory. Note that the files will be copied as-is; there are no commands or -# markers available. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_EXTRA_FILES = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is -# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will -# contain links (just like the HTML output) instead of page references. This -# makes the output suitable for online browsing using a PDF viewer. -# The default value is: YES. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. -# The default value is: YES. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode -# command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_BATCHMODE = NO - -# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the -# index chapters (such as File Index, Compound Index, etc.) in the output. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_HIDE_INDICES = NO - -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. -# The default value is: plain. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_BIB_STYLE = plain - -#--------------------------------------------------------------------------- -# Configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The -# RTF output is optimized for Word 97 and may not look too pretty with other RTF -# readers/editors. -# The default value is: NO. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: rtf. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF -# documents. This may be useful for small projects and may help to save some -# trees in general. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will -# contain hyperlink fields. The RTF file will contain links (just like the HTML -# output) instead of page references. This makes the output suitable for online -# browsing using Word or some other Word compatible readers that support those -# fields. -# -# Note: WordPad (write) and others do not support links. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. -# -# See also section "Doxygen usage" for information on how to generate the -# default style sheet that doxygen normally uses. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_EXTENSIONS_FILE = - -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for -# classes and files. -# The default value is: NO. - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. A directory man3 will be created inside the directory specified by -# MAN_OUTPUT. -# The default directory is: man. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to the generated -# man pages. In case the manual section does not start with a number, the number -# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is -# optional. -# The default value is: .3. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_EXTENSION = .3 - -# The MAN_SUBDIR tag determines the name of the directory created within -# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by -# MAN_EXTENSION with the initial . removed. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_SUBDIR = - -# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it -# will generate one additional man file for each entity documented in the real -# man page(s). These additional files only source the real man page, but without -# them the man command would be unable to find the correct page. -# The default value is: NO. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that -# captures the structure of the code including all documentation. -# The default value is: NO. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: xml. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_OUTPUT = xml - -# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program -# listings (including syntax highlighting and cross-referencing information) to -# the XML output. Note that enabling this will significantly increase the size -# of the XML output. -# The default value is: YES. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# Configuration options related to the DOCBOOK output -#--------------------------------------------------------------------------- - -# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files -# that can be used to generate PDF. -# The default value is: NO. - -GENERATE_DOCBOOK = NO - -# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in -# front of it. -# The default directory is: docbook. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_OUTPUT = docbook - -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - -#--------------------------------------------------------------------------- -# Configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. -# The default value is: NO. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module -# file that captures the structure of the code including all documentation. -# -# Note that this feature is still experimental and incomplete at the moment. -# The default value is: NO. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary -# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI -# output from the Perl module output. -# The default value is: NO. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely -# formatted so it can be parsed by a human reader. This is useful if you want to -# understand what is going on. On the other hand, if this tag is set to NO, the -# size of the Perl module output will be much smaller and Perl will parse it -# just the same. -# The default value is: YES. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file are -# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful -# so different doxyrules.make files included by the same Makefile don't -# overwrite each other's variables. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all -# C-preprocessor directives found in the sources and include files. -# The default value is: YES. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names -# in the source code. If set to NO, only conditional compilation will be -# performed. Macro expansion can be done in a controlled way by setting -# EXPAND_ONLY_PREDEF to YES. -# The default value is: NO. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -MACRO_EXPANSION = YES - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then -# the macro expansion is limited to the macros specified with the PREDEFINED and -# EXPAND_AS_DEFINED tags. -# The default value is: NO. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES, the include files in the -# INCLUDE_PATH will be searched if a #include is found. -# The default value is: YES. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by the -# preprocessor. -# This tag requires that the tag SEARCH_INCLUDES is set to YES. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will be -# used. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that are -# defined before the preprocessor is started (similar to the -D option of e.g. -# gcc). The argument of the tag is a list of macros of the form: name or -# name=definition (no spaces). If the definition and the "=" are omitted, "=1" -# is assumed. To prevent a macro definition from being undefined via #undef or -# recursively expanded use the := operator instead of the = operator. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -PREDEFINED = GRPC_FINAL= GRPC_OVERIDE= - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this -# tag can be used to specify a list of macro names that should be expanded. The -# macro definition that is found in the sources will be used. Use the PREDEFINED -# tag if you want to use a different macro definition that overrules the -# definition found in the source code. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all references to function-like macros that are alone on a line, have -# an all uppercase name, and do not end with a semicolon. Such function macros -# are typically used for boiler-plate code, and will confuse the parser if not -# removed. -# The default value is: YES. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration options related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES tag can be used to specify one or more tag files. For each tag -# file the location of the external documentation should be added. The format of -# a tag file without this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where loc1 and loc2 can be relative or absolute paths or URLs. See the -# section "Linking to external documentation" for more information about the use -# of tag files. -# Note: Each tag file must have a unique name (where the name does NOT include -# the path). If a tag file is not located in the directory in which doxygen is -# run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create a -# tag file that is based on the input files it reads. See section "Linking to -# external documentation" for more information about the usage of tag files. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES, all external class will be listed in -# the class index. If set to NO, only the inherited external classes will be -# listed. -# The default value is: NO. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will be -# listed. -# The default value is: YES. - -EXTERNAL_GROUPS = YES - -# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in -# the related pages index. If set to NO, only the current project's pages will -# be listed. -# The default value is: YES. - -EXTERNAL_PAGES = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. - -DIA_PATH = - -# If set to YES the inheritance and collaboration graphs will hide inheritance -# and usage relations if the target is undocumented or is not a class. -# The default value is: YES. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz (see: -# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent -# Bell Labs. The other options in this section have no effect if this option is -# set to NO -# The default value is: NO. - -HAVE_DOT = YES - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed -# to run in parallel. When set to 0 doxygen will base this on the number of -# processors available in the system. You can set it explicitly to a value -# larger than 0 to get control over the balance between CPU load and processing -# speed. -# Minimum value: 0, maximum value: 32, default value: 0. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_NUM_THREADS = 0 - -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTNAME = Helvetica - -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTPATH = - -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -CLASS_GRAPH = NO - -# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a -# graph for each documented class showing the direct and indirect implementation -# dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -COLLABORATION_GRAPH = NO - -# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GROUP_GRAPHS = NO - -# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -UML_LOOK = NO - -# If the UML_LOOK tag is enabled, the fields and methods are shown inside the -# class node. If there are many fields or methods and many nodes the graph may -# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the -# number of items for each type to make the size more manageable. Set this to 0 -# for no limit. Note that the threshold may be exceeded by 50% before the limit -# is enforced. So when you set the threshold to 10, up to 15 fields may appear, -# but if the number exceeds 15, the total amount of fields shown is limited to -# 10. -# Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. - -UML_LIMIT_NUM_FIELDS = 10 - -# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and -# collaboration graphs will show the relations between templates and their -# instances. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -TEMPLATE_RELATIONS = NO - -# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to -# YES then doxygen will generate a graph for each documented file showing the -# direct and indirect include dependencies of the file with other documented -# files. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -INCLUDE_GRAPH = NO - -# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are -# set to YES then doxygen will generate a graph for each documented file showing -# the direct and indirect include dependencies of the file with other documented -# files. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -INCLUDED_BY_GRAPH = NO - -# If the CALL_GRAPH tag is set to YES then doxygen will generate a call -# dependency graph for every global function or class method. -# -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -CALL_GRAPH = NO - -# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller -# dependency graph for every global function or class method. -# -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical -# hierarchy of all classes instead of a textual one. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GRAPHICAL_HIERARCHY = NO - -# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the -# dependencies a directory has on other directories in a graphical way. The -# dependency relations are determined by the #include relations between the -# files in the directories. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -DIRECTORY_GRAPH = NO - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. -# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order -# to make the SVG files visible in IE 9+ (other browsers do not have this -# requirement). -# Possible values are: png, jpg, gif and svg. -# The default value is: png. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_IMAGE_FORMAT = png - -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# -# Note that this requires a modern browser other than Internet Explorer. Tested -# and working are Firefox, Chrome, Safari, and Opera. -# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make -# the SVG files visible. Older versions of IE do not have SVG support. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -INTERACTIVE_SVG = NO - -# The DOT_PATH tag can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the \dotfile -# command). -# This tag requires that the tag HAVE_DOT is set to YES. - -DOTFILE_DIRS = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). - -MSCFILE_DIRS = - -# The DIAFILE_DIRS tag can be used to specify one or more directories that -# contain dia files that are included in the documentation (see the \diafile -# command). - -DIAFILE_DIRS = - -# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. - -PLANTUML_JAR_PATH = - -# When using plantuml, the specified paths are searched for files specified by -# the !include statement in a plantuml block. - -PLANTUML_INCLUDE_PATH = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes -# that will be shown in the graph. If the number of nodes in a graph becomes -# larger than this value, doxygen will truncate the graph, which is visualized -# by representing a node as a red box. Note that doxygen if the number of direct -# children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that -# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. -# Minimum value: 0, maximum value: 10000, default value: 50. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs -# generated by dot. A depth value of 3 means that only nodes reachable from the -# root by following a path via at most 3 edges will be shown. Nodes that lay -# further from the root node will be omitted. Note that setting this option to 1 -# or 2 may greatly reduce the computation time needed for large code bases. Also -# note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. -# Minimum value: 0, maximum value: 1000, default value: 0. -# This tag requires that the tag HAVE_DOT is set to YES. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) support -# this, this feature is disabled by default. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page -# explaining the meaning of the various boxes and arrows in the dot generated -# graphs. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot -# files that are used to generate the various graphs. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_CLEANUP = YES - |