path: root/doc/git-annex.mdwn

# NAME

git-annex - manage files with git, without checking their contents in

# SYNOPSIS

git annex command [params ...]

# DESCRIPTION

git-annex allows managing files with git, without checking the file
contents into git. While that may seem paradoxical, it is useful when
dealing with files larger than git can currently easily handle, whether due
to limitations in memory, checksumming time, or disk space.

Even without file content tracking, being able to manage files with git,
move files around and delete files with versioned directory trees, and use
branches and distributed clones, are all very handy reasons to use git. And
annexed files can co-exist in the same git repository with regularly
versioned files, which is convenient for maintaining documents, Makefiles,
etc that are associated with annexed files but that benefit from full
revision control.

When a file is annexed, its content is moved into a key-value store, and
a symlink is made that points to the content. These symlinks are checked into
git and versioned like regular files. You can move them around, delete
them, and so on. Pushing to another git repository will make git-annex
there aware of the annexed file, and it can be used to retrieve its
content from the key-value store.

# EXAMPLES

	# git annex get video/hackity_hack_and_kaxxt.mov
	get video/hackity_hack_and_kaxxt.mov (not available)
	  I was unable to access these remotes: server
	  Try making some of these repositories available:
	  	5863d8c0-d9a9-11df-adb2-af51e6559a49  -- my home file server
	   	58d84e8a-d9ae-11df-a1aa-ab9aa8c00826  -- portable USB drive
	   	ca20064c-dbb5-11df-b2fe-002170d25c55  -- backup SATA drive
	failed
	# sudo mount /media/usb
	# git remote add usbdrive /media/usb
	# git annex get video/hackity_hack_and_kaxxt.mov
	get video/hackity_hack_and_kaxxt.mov (from usbdrive...) ok
	
	# git annex add iso
	add iso/Debian_5.0.iso ok
	
	# git annex drop iso/Debian_4.0.iso
	drop iso/Debian_4.0.iso ok
	
	# git annex move iso --to=usbdrive
	move iso/Debian_5.0.iso (moving to usbdrive...) ok

# COMMONLY USED COMMANDS

Like many git commands, git-annex can be passed a path that
is either a file or a directory. In the latter case it acts on all relevant
files in the directory. When no path is specified, most git-annex commands
default to acting on all relevant files in the current directory (and
subdirectories).

* `add [path ...]`

  Adds files in the path to the annex. If no path is specified, adds
  files from the current directory and below.

  Files that are already checked into git, or that git has been configured
  to ignore will be silently skipped. (Use `--force` to add ignored files.)

  Dotfiles are skipped unless explicitly listed, or the --include-dotfiles
  option is used.

* `get [path ...]`

  Makes the content of annexed files available in this repository. This
  will involve copying them from another repository, or downloading them,
  or transferring them from some kind of key-value store.

  Normally git-annex will choose which repository to copy the content from,
  but you can override this using the `--from` option.
 
  Rather than specifying a filename, the `--all` option can be used to 
  get all available versions of all files, or the --key=KEY`
  option can be used to get a specified key.

* `drop [path ...]`

  Drops the content of annexed files from this repository.

  git-annex will refuse to drop content if it cannot verify it is
  safe to do so. This can be overridden with the `--force` switch.

  To drop content from a remote, specify `--from`.

* `move [path ...]`

  When used with the `--from` option, moves the content of annexed files
  from the specified repository to the current one.

  When used with the `--to` option, moves the content of annexed files from
  the current repository to the specified one.

* `copy [path ...]`

  When used with the `--from` option, copies the content of annexed files
  from the specified repository to the current one.

  When used with the `--to` option, copies the content of annexed files from
  the current repository to the specified one.

  To avoid contacting the remote to check if it has every file
  when copying --to the repository, specify `--fast`

  To force checking the remote for every file when copying --from the
  repository, specify `--force`.

* `status [path ...]`

  Similar to `git status --short`, displays the status of the files in the
  working tree. Shows files that are not checked into git, files that
  have been deleted, and files that have been modified.
  Particularly useful in direct mode.

* `unlock [path ...]`

  Normally, the content of annexed files is protected from being changed.
  Unlocking an annexed file allows it to be modified. This replaces the
  symlink for each specified file with a copy of the file's content.
  You can then modify it and `git annex add` (or `git commit`) to inject
  it back into the annex.

* `edit [path ...]`

  This is an alias for the unlock command. May be easier to remember,
  if you think of this as allowing you to edit an annexed file.

* `lock [path ...]`

  Use this to undo an unlock command if you don't want to modify
  the files, or have made modifications you want to discard.

* `sync [remote ...]`

  Use this command when you want to synchronize the local repository with
  one or more of its remotes. You can specify the remotes (or remote
  groups) to sync with by name; the default if none are specified is to
  sync with all remotes.
  Or specify `--fast` to sync with the remotes with the
  lowest annex-cost value.

  The sync process involves first committing any local changes to files
  that have previously been added to the repository,
  then fetching and merging the `synced/master` and the `git-annex` branch
  from the remote repositories, and finally pushing the changes back to
  those branches on the remote repositories. You can use standard git
  commands to do each of those steps by hand, or if you don't want to
  worry about the details, you can use sync.

  Merge conflicts are automatically handled by sync. When two conflicting
  versions of a file have been committed, both will be added to the tree,
  under different filenames. For example, file "foo" would be replaced
  with "foo.somekey" and "foo.otherkey".

  Note that syncing with a remote will not update the remote's working
  tree with changes made to the local repository. However, those changes
  are pushed to the remote, so they can be merged into its working tree
  by running "git annex sync" on the remote.

  With the `--content` option, the contents of annexed files in the work
  tree will also be uploaded and downloaded from remotes. By default,
  this tries to get each annexed file that the local repository does not
  yet have, and then copies each file to every remote that it is syncing with.
  This behavior can be overridden by configuring the preferred content of
  a repository. See see PREFERRED CONTENT below.

  The `--message` or `-m` option can be used to specify a commit message.

* `merge`

  This performs the same merging (and merge conflict resolution)
  that is done by the sync command, but without pushing or pulling any data.

  One way to use this is to put `git annex merge` into a repository's
  post-receive hook. Then any syncs to the repository will update its working
  copy automatically.

* `mirror [path ...]`

  This causes a destination repository to mirror a source repository.

  To use the local repository as the source repository,
  specify mirror `--to` remote.

  To use a remote as the source repository, specify mirror `--from` remote.

  Each specified file in the source repository is mirrored to the destination
  repository. If a file's content is present in the source repository, it is
  copied to the destination repository. If a file's content is not present in
  the source repository, it will be dropped from the destination repository
  when the numcopies setting allows.

  Note that mirror does not sync the git repository, but only the file
  contents.

  Also, --all may be specified to mirror all objects stored in the git
  annex, not only objects used by currently existing files. However, this
  bypasses checking the .gitattributes annex.numcopies setting when
  dropping files.

* `addurl [url ...]`

  Downloads each url to its own file, which is added to the annex.

  To avoid immediately downloading the url, specify `--fast`.

  To avoid storing the size of the url's content, and accept whatever
  is there at a future point, specify `--relaxed`. (Implies `--fast`.)

  Normally the filename is based on the full url, so will look like
  "www.example.com_dir_subdir_bigfile". In some cases, addurl is able to
  come up with a better filename based on other information. Or, for a
  shorter filename, specify `--pathdepth=N`. For example,
  `--pathdepth=1` will use "dir/subdir/bigfile",
  while `--pathdepth=3` will use "bigfile". It can also be negative;
  `--pathdepth=-2` will use the last two parts of the url.

  Or, to directly specify what file the url is added to, specify `--file`.
  This changes the behavior; now all the specified urls are recorded as
  alternate locations from which the file can be downloaded. In this mode,
  addurl can be used both to add new files, or to add urls to existing files.

  When `quvi` is installed, urls are automatically tested to see if they
  point to a video hosting site, and the video is downloaded instead.

  Urls to torrent files (including magnet links) will cause the content of
  the torrent to be downloaded, using `aria2c`.

* `rmurl file url`

  Record that the file is no longer available at the url.

* `import [path ...]`

  Moves files from somewhere outside the git working copy, and adds them to
  the annex. Individual files to import can be specified.
  If a directory is specified, the entire directory is imported.

        	git annex import /media/camera/DCIM/*

  By default, importing two files with the same contents from two different
  locations will result in both files being added to the repository.
  (With all checksumming backends, including the default SHA256E,
  only one copy of the data will be stored.)

  To not delete files from the import location, use the
  `--duplicate` option. This could allow importing the same files repeatedly
  to different locations in a repository. More likely, it could be used to
  import the same files to a number of different branches or separate git
  repositories.

  To only import files whose content has not been seen before by git-annex,
  use the `--deduplicate` option. Duplicate files will be deleted from the
  import location.

  To only import files whose content has not been seen before by git-annex,
  but avoid deleting duplicate files, use the `--skip-duplicates` option.

  The `--clean-duplicates` option does not import any new files, but any files
  found in the import location that are duplicates of content in the annex
  are deleted.

  (Note that using `--deduplicate` or `--clean-duplicates` with the WORM
  backend does not look at file content, but filename and mtime.)

* `importfeed [url ...]`

  Imports the contents of podcast feeds. Only downloads files whose
  urls have not already been added to the repository before, so you can
  delete, rename, etc the resulting files and repeated runs won't duplicate
  them. (Use `--force` to force downloading urls it's seen before.)

  Use `--template` to control where the files are stored.
  The default template is '${feedtitle}/${itemtitle}${extension}'
  (Other available variables: feedauthor, itemauthor, itemsummary, itemdescription, itemrights, itemid, itempubdate, title, author)

  The `--relaxed` and `--fast` options behave the same as they do in addurl.

  When quvi is installed, links in the feed are tested to see if they
  are on a video hosting site, and the video is downloaded. This allows
  importing e.g., youtube playlists.

* `undo [filename|directory] ...`

  When passed a filename, undoes the last change that was made to that
  file.

  When passed a directory, undoes the last change that was made to the
  contents of that directory.

  Running undo a second time will undo the undo, returning the working
  tree to the same state it had before. In order for undoing an undo of
  staged changes, any staged changes are first committed by the
  undo command.

  Note that this does not undo get/drop of a file's content; it only
  operates on the file tree committed to git.

* `watch`

  Watches for changes to files in the current directory and its subdirectories,
  and takes care of automatically adding new files, as well as dealing with
  deleted, copied, and moved files. With this running as a daemon in the
  background, you no longer need to manually run git commands when
  manipulating your files.

  By default, all files in the directory will be added to the repository.
  (Including dotfiles.) To block some files from being added, use
  `.gitignore` files.

  By default, all files that are added are added to the annex, the same
  as when you run `git annex add`. If you configure annex.largefiles,
  files that it does not match will instead be added with `git add`.

  To not daemonize, run with `--foreground` ; to stop a running daemon,
  run with `--stop`.

* `assistant`

  Like watch, but also automatically syncs changes to other remotes.
  Typically started at boot, or when you log in.

  With the `--autostart` option, the assistant is started in any repositories
  it has created. These are listed in `~/.config/git-annex/autostart`.

* `webapp`

  Opens a web app, that allows easy setup of a git-annex repository,
  and control of the git-annex assistant. If the assistant is not
  already running, it will be started.

  By default, the webapp can only be accessed from localhost, and running
  it opens a browser window.

  To use the webapp on a remote computer, use the `--listen=address`
  option to specify the address the web server should listen on
  (or set annex.listen).
  This disables running a local web browser, and outputs the url you
  can use to open the webapp.

  When using the webapp on a remote computer, you'll almost certainly
  want to enable HTTPS. The webapp will use HTTPS if it finds
  a .git/annex/privkey.pem and .git/annex/certificate.pem. Here's
  one way to generate those files, using a self-signed certificate:

    openssl genrsa -out .git/annex/privkey.pem 4096
    openssl req -new -x509 -key .git/annex/privkey.pem > .git/annex/certificate.pem

# REPOSITORY SETUP COMMANDS

* `init [description]`

  Until a repository (or one of its remotes) has been initialized,
  git-annex will refuse to operate on it, to avoid accidentally
  using it in a repository that was not intended to have an annex.

  It's useful, but not mandatory, to initialize each new clone
  of a repository with its own description. If you don't provide one,
  one will be generated using the username, hostname and the path.

* `describe repository description`

  Changes the description of a repository.

  The repository to describe can be specified by git remote name or
  by uuid. To change the description of the current repository, use
  "here".

* `initremote name [param=value ...]`

  Creates a new special remote, and adds it to `.git/config`.

  The remote's configuration is specified by the parameters. Different
  types of special remotes need different configuration values. The
  command will prompt for parameters as needed.

  All special remotes support encryption. You can either specify
  `encryption=none` to disable encryption, or specify
  `encryption=hybrid keyid=$keyid ...` to specify a GPG key id (or an email
  address associated with a key).

  There are actually three schemes that can be used for management of the
  encryption keys. When using the encryption=hybrid scheme, additional
  GPG keys can be given access to the encrypted special remote easily
  (without re-encrypting everything). When using encryption=shared,
  a shared key is generated and stored in the git repository, allowing
  anyone who can clone the git repository to access it. Finally, when using
  encryption=pubkey, content in the special remote is directly encrypted
  to the specified GPG keys, and additional ones cannot easily be given
  access.

  Note that with encryption enabled, a cryptographic key is created.
  This requires sufficient entropy. If initremote seems to hang or take
  a long time while generating the key, you may want to Ctrl-c it and
  re-run with `--fast`, which causes it to use a lower-quality source of
  randomness.

  Example Amazon S3 remote:

    	git annex initremote mys3 type=S3 encryption=hybrid keyid=me@example.com datacenter=EU

* `enableremote name [param=value ...]`

  Enables use of an existing special remote in the current repository,
  which may be a different repository than the one in which it was
  originally created with the initremote command.

  The name of the remote is the same name used when originally
  creating that remote with "initremote". Run "git annex enableremote"
  without any name to get a list of special remote names.

  Some special remotes may need parameters to be specified every time.
  For example, the directory special remote requires a directory= parameter.

  This command can also be used to modify the configuration of an existing
  special remote, by specifying new values for parameters that were
  originally set when using initremote. (However, some settings such as
  the as the encryption scheme cannot be changed once a special remote
  has been created.)

  The GPG keys that an encrypted special remote is encrypted with can be
  changed using the keyid+= and keyid-= parameters. These respectively
  add and remove keys from the list. However, note that removing a key
  does NOT necessarily prevent the key's owner from accessing data
  in the encrypted special remote
  (which is by design impossible, short of deleting the remote).

  One use-case of keyid-= is to replace a revoked key with
  a new key:

        	git annex enableremote mys3 keyid-=revokedkey keyid+=newkey

  Also, note that for encrypted special remotes using plain public-key
  encryption (encryption=pubkey), adding or removing a key has NO effect
  on files that have already been copied to the remote. Hence using
  keyid+= and keyid-= with such remotes should be used with care, and
  make little sense except in cases like the revoked key example above.

* `numcopies [N]`

  Tells git-annex how many copies it should preserve of files, over all
  repositories. The default is 1.

  Run without a number to get the current value.

  When git-annex is asked to drop a file, it first verifies that the
  required number of copies can be satisfied among all the other
  repositories that have a copy of the file.

  This can be overridden on a per-file basis by the annex.numcopies setting
  in .gitattributes files.

* `trust [repository ...]`

  Records that a repository is trusted to not unexpectedly lose
  content. Use with care.

  To trust the current repository, use "here".

* `untrust [repository ...]`

  Records that a repository is not trusted and could lose content
  at any time.

* `semitrust [repository ...]`

  Returns a repository to the default semi trusted state.

* `dead [repository ...]`

  Indicates that the repository has been irretrievably lost.
  (To undo, use semitrust.)

* `group repository groupname`

  Adds a repository to a group, such as "archival", "enduser", or "transfer".
  The groupname must be a single word.

  Omit the groupname to show the current groups that a repository is in.

* `ungroup repository groupname`

  Removes a repository from a group.

* `wanted repository [expression]`

  When run with an expression, configures the content that is preferred
  to be held in the archive. See PREFERRED CONTENT below.

  For example:

        	git annex wanted . "include=*.mp3 or include=*.ogg"

  Without an expression, displays the current preferred content setting
  of the repository.

* `schedule repository [expression]`

  When run with an expression, configures scheduled jobs to run at a
  particular time. This can be used to make the assistant periodically run
  incremental fscks. See SCHEDULED JOBS below.

* `vicfg`

  Opens EDITOR on a temp file containing most of the above configuration
  settings, as well as a few others, and when it exits, stores any changes
  made back to the git-annex branch.

* `direct`

  Switches a repository to use direct mode, where rather than symlinks to
  files, the files are directly present in the repository.

  As part of the switch to direct mode, any changed files will be committed.

  Note that git commands that operate on the work tree will refuse to
  run in direct mode repositories. Use `git annex proxy` to safely run such
  commands.

* `indirect`

  Switches a repository back from direct mode to the default, indirect mode.

  As part of the switch from direct mode, any changed files will be committed.

# REPOSITORY MAINTENANCE COMMANDS

* `fsck [path ...]`

  With no parameters, this command checks the whole annex for consistency,
  and warns about or fixes any problems found. This is a good complement to
  `git fsck`.

  With parameters, only the specified files are checked.

  To check a remote to fsck, specify `--from`.

  To avoid expensive checksum calculations (and expensive transfers when
  fscking a remote), specify `--fast`.

  To start a new incremental fsck, use the `--incremental` option. Then
  the next time you fsck, you can instead use the `--more` option 
  to skip over files that have already been checked, and continue
  where it left off.

  The `--incremental-schedule` option makes a new incremental fsck be
  started a configurable time after the last incremental fsck was started.
  Once the current incremental fsck has completely finished, it causes
  a new one to start.

  Maybe you'd like to run a fsck for 5 hours at night, picking up each
  night where it left off. You'd like this to continue until all files
  have been fscked. And once it's done, you'd like a new fsck pass to start,
  but no more often than once a month. Then put this in a nightly cron job:

        	git annex fsck --incremental-schedule 30d --time-limit 5h

  To verify data integrity only while disregarding required number of copies,
  use `--numcopies=1`.

* `unused`

  Checks the annex for data that does not correspond to any files present
  in any tag or branch, and prints a numbered list of the data.

  To only show unused temp and bad files, specify `--fast`.

  To check for annexed data on a remote, specify `--from`.

  After running this command, you can use the `--unused` option to
  operate on all the unused data that was found. For example, to
  move all unused data to origin:

        	git annex unused; git annex move --unused --to origin

* `dropunused [number|range ...]`

  Drops the data corresponding to the numbers, as listed by the last
  `git annex unused`

  You can also specify ranges of numbers, such as "1-1000".
  Or, specify "all" to drop all unused data.

  To drop the data from a remote, specify `--from.`

* `addunused [number|range ...]`

  Adds back files for the content corresponding to the numbers or ranges,
  as listed by the last `git annex unused`. The files will have names
  starting with "unused."

* `fix [path ...]`

  Fixes up symlinks that have become broken to again point to annexed content.
  This is useful to run if you have been moving the symlinks around,
  but is done automatically when committing a change with git too.

* `upgrade`

  Upgrades the repository to current layout.

* `forget`

  Causes the git-annex branch to be rewritten, throwing away historical
  data about past locations of files. The resulting branch will use less
  space, but `git annex log` will not be able to show where
  files used to be located.

  To also prune references to repositories that have been marked as dead,
  specify `--drop-dead`.

  When this rewritten branch is merged into other clones of
  the repository, `git-annex` will automatically perform the same rewriting
  to their local `git-annex` branches. So the forgetfulness will automatically
  propagate out from its starting point until all repositories running
  git-annex have forgotten their old history. (You may need to force
  git to push the branch to any git repositories not running git-annex.)

* `repair`

  This can repair many of the problems with git repositories that `git fsck`
  detects, but does not itself fix. It's useful if a repository has become
  badly damaged. One way this can happen is if a repository used by git-annex
  is on a removable drive that gets unplugged at the wrong time.

  This command can actually be used inside git repositories that do not
  use git-annex at all; when used in a repository using git-annex, it
  does additional repairs of the git-annex branch.

  It works by deleting any corrupt objects from the git repository, and
  retrieving all missing objects it can from the remotes of the repository.

  If that is not sufficient to fully recover the repository, it can also
  reset branches back to commits before the corruption happened, delete
  branches that are no longer available due to the lost data, and remove any
  missing files from the index. It will only do this if run with the
  `--force` option, since that rewrites history and throws out missing data.
  Note that the `--force` option never touches tags, even if they are no
  longer usable due to missing data.

  After running this command, you will probably want to run `git fsck` to
  verify it fixed the repository. Note that fsck may still complain about
  objects referenced by the reflog, or the stash, if they were unable to be
  recovered. This command does not try to clean up either the reflog or the
  stash.

  It is also a good idea to run `git annex fsck --fast` after this command,
  to make sure that the git-annex branch reflects reality.

# QUERY COMMANDS

* `find [path ...]`

  Outputs a list of annexed files in the specified path. With no path,
  finds files in the current directory and its subdirectories.

  By default, only lists annexed files whose content is currently present.
  This can be changed by specifying matching options. To list all
  annexed files, present or not, specify `--include "*"`. To list all
  annexed files whose content is not present, specify `--not --in=here`

  To output filenames terminated with nulls, for use with xargs -0,
  specify `--print0`. Or, a custom output formatting can be specified using
  `--format`. The default output format is the same as `--format='${file}\\n'`

  These variables are available for use in formats: file, key, backend,
  bytesize, humansize, keyname, hashdirlower, hashdirmixed, mtime (for
  the mtime field of a WORM key).

* `whereis [path ...]`

  Displays a information about where the contents of files are located.

* `list [path ...]`

  Displays a table of remotes that contain the contents of the specified
  files. This is similar to whereis but a more compact display. Only
  configured remotes are shown by default; specify --allrepos to list
  all repositories.

* `log [path ...]`

  Displays the location log for the specified file or files,
  showing each repository they were added to ("+") and removed from ("-").

  To limit how far back to search for location log changes, the options
  `--since`, `--after`, `--until`, `--before`, and `--max-count` can be specified.
  They are passed through to git log. For example, `--since "1 month ago"`

  To generate output suitable for the gource visualization program,
  specify `--gource`.

* `info [directory|file|remote|uuid ...]`

  Displays statistics and other information for the specified item,
  which can be a directory, or a file, or a remote, or the uuid of a
  repository. 

  When no item is specified, displays statistics and information
  for the repository as a whole.

  When a directory is specified, the file matching options can be used
  to select the files in the directory that are included in the statistics.

  To only show the data that can be gathered quickly, use `--fast`.

  For example, suppose you want to run "git annex get .", but
  would first like to see how much disk space that will use.
  Then run:

        	git annex info --fast . --not --in here

* `version`

  Shows the version of git-annex, as well as repository version information.

* `map`

  Helps you keep track of your repositories, and the connections between them,
  by going out and looking at all the ones it can get to, and generating a
  Graphviz file displaying it all. If the `dot` command is available, it is
  used to display the file to your screen (using x11 backend). (To disable
  this display, specify `--fast`)

  This command only connects to hosts that the host it's run on can
  directly connect to. It does not try to tunnel through intermediate hosts.
  So it might not show all connections between the repositories in the network.

  Also, if connecting to a host requires a password, you might have to enter
  it several times as the map is being built.

  Note that this subcommand can be used to graph any git repository; it
  is not limited to git-annex repositories.

# METADATA COMMANDS

* `metadata [path ...] [-s field=value -s field+=value -s field-=value ...] [-g field]`

  The content of a file can have any number of metadata fields
  attached to it to describe it. Each metadata field can in turn
  have any number of values.

  This command can be used to set metadata, or show the currently set
  metadata.

  To show current metadata, run without any -s parameters. The --json
  option will enable json output.

  To only get the value(s) of a single field, use -g field.
  The values will be output one per line, with no other output, so
  this is suitable for use in a script.

  To set a field's value, removing any old value(s), use -s field=value.

  To add an additional value, use -s field+=value.

  To remove a value, use -s field-=value.

  To set a value, only if the field does not already have a value,
  use -s field?=value

  To set a tag, use -t tag, and use -u tag to remove a tag.

  For example, to set some tags on a file and also its author:

        	git annex metadata annexscreencast.ogv -t video -t screencast -s author+=Alice

* `view [tag ...] [field=value ...] [field=glob ...] [!tag ...] [field!=value ...]`

  Uses metadata to build a view branch of the files in the current branch,
  and checks out the view branch. Only files in the current branch whose
  metadata matches all the specified field values and tags will be
  shown in the view.

  Multiple values for a metadata field can be specified, either by using
  a glob (`field="*"`) or by listing each wanted value. The resulting view
  will put files in subdirectories according to the value of their fields.

  Once within such a view, you can make additional directories, and
  copy or move files into them. When you commit, the metadata will
  be updated to correspond to your changes.

  There are fields corresponding to the path to the file. So a file
  "foo/bar/baz/file" has fields "/=foo", "foo/=bar", and "foo/bar/=baz".
  These location fields can be used the same as other metadata to construct
  the view.

  For example, `/=podcasts` will only include files from the podcasts
  directory in the view, while `podcasts/=*` will preserve the
  subdirectories of the podcasts directory in the view.

* `vpop [N]`

  Switches from the currently active view back to the previous view.
  Or, from the first view back to original branch.

  The optional number tells how many views to pop.

* `vfilter [tag ...] [field=value ...] [!tag ...] [field!=value ...]`

  Filters the current view to only the files that have the
  specified field values and tags.

* `vadd [field=glob ...] [field=value ...] [tag ...]`

  Changes the current view, adding an additional level of directories
  to categorize the files.

  For example, when the view is by author/tag, `vadd year=*` will
  change it to year/author/tag.

  So will `vadd year=2014 year=2013`, but limiting the years in view
  to only those two.

* `vcycle`

  When a view involves nested subdirectories, this cycles the order.

  For example, when the view is by year/author/tag, `vcycle` will switch
  it to author/tag/year.

# UTILITY COMMANDS

* `migrate [path ...]`

  Changes the specified annexed files to use the default key-value backend
  (or the one specified with `--backend`). Only files whose content
  is currently available are migrated.

  Note that the content is also still available using the old key after
  migration. Use `git annex unused` to find and remove the old key.

  Normally, nothing will be done to files already using the new backend.
  However, if a backend changes the information it uses to construct a key,
  this can also be used to migrate files to use the new key format.

* `reinject src dest`

  Moves the src file into the annex as the content of the dest file.
  This can be useful if you have obtained the content of a file from
  elsewhere and want to put it in the local annex.

  Automatically runs fsck on dest to check that the expected content was
  provided.

  Example:

        	git annex reinject /tmp/foo.iso foo.iso

* `unannex [path ...]`

  Use this to undo an accidental `git annex add` command. It puts the
  file back how it was before the add.

  Note that for safety, the content of the file remains in the annex,
  until you use `git annex unused` and `git annex dropunused`.

  This is not the command you should use if you intentionally annexed a
  file and don't want its contents any more. In that case you should use
  `git annex drop` instead, and you can also `git rm` the file.

  Normally this does a slow copy of the file. In `--fast` mode, it
  instead makes a hard link from the file to the content in the annex.
  But use --fast mode with caution, because editing the file will
  change the content in the annex.

* `uninit`

  Use this to stop using git annex. It will unannex every file in the
  repository, and remove all of git-annex's other data, leaving you with a
  git repository plus the previously annexed files.

* `reinit uuid|description`

  Normally, initializing a repository generates a new, unique identifier
  (UUID) for that repository. Occasionally it may be useful to reuse a
  UUID -- for example, if a repository got deleted, and you're
  setting it back up.

  Use this with caution; it can be confusing to have two existing
  repositories with the same UUID. Also, you will probably want to run
  a fsck.

# PLUMBING COMMANDS

* `pre-commit [path ...]`

  This is meant to be called from git's pre-commit hook. `git annex init`
  automatically creates a pre-commit hook using this.

  Fixes up symlinks that are staged as part of a commit, to ensure they
  point to annexed content. Also handles injecting changes to unlocked
  files into the annex. When in a view, updates metadata to reflect changes
  made to files in the view.

* `lookupkey [file ...]`

  This plumbing-level command looks up the key used for a file in the
  index. The key is output to stdout. If there is no key (because
  the file is not present in the index, or is not a git-annex managed file),
  nothing is output, and it exits nonzero.

* `examinekey [key ...]`

  This plumbing-level command is given a key, and prints information
  that can be determined purely by looking at the key.

  To specify what information to print, use `--format`. Or use `--json`
  to get all available information in JSON format.

  The same variables can be used in the format string as can be used in
  the format string of git annex find (except there is no file option
  here).

  For example, the location a key's value is stored (in indirect mode)
  can be looked up by running:

        	git annex examinekey --format='.git/annex/objects/${hashdirmixed}${key}/${key}'

* `fromkey key file`

  This plumbing-level command can be used to manually set up a file
  in the git repository to link to a specified key.

* `dropkey [key ...]`

  This plumbing-level command drops the annexed data for the specified
  keys from this repository.

  This can be used to drop content for arbitrary keys, which do not need
  to have a file in the git repository pointing at them.

* `transferkey`

  This plumbing-level command is used to request a single key be
  transferred. Either the --from or the --to option can be used to specify
  the remote to use. A --file option can be used to hint at the file
  associated with the key.

* `transferkeys`

  This plumbing-level command is used by the assistant to transfer data.
  It is fed instructions about the keys to transfer using an internal
  stdio protocol, which is intentionally not documented (as it may change
  at any time).

* `setpresentkey key uuid [1|0]`

  This plumbing-level command changes git-annex's records about whether
  the specified key is present in a remote with the specified uuid.

* `rekey [file key ...]`

  This plumbing-level command is similar to migrate, but you specify
  both the file, and the new key to use for it.

  With `--force`, even files whose content is not currently available will
  be rekeyed. Use with caution.

* `findref [ref]`

  This is similar to the find command, but instead of finding files in the
  current work tree, it finds files in the specified git ref.

  Most MATCHING OPTIONS can be used with findref, to limit the files it
  finds. However, the --include and --exclude options will not work.

* `proxy -- git cmd [options]`

  Only useful in a direct mode repository, this runs the specified git
  command with a temporary work tree, and updates the working tree to
  reflect any changes staged or committed by the git command.
  
  For example, to revert the most recent change that was committed
  to the repository:

    git annex proxy -- git revert HEAD

  To check out a past version of the repository:

    git annex proxy -- git checkout HEAD^^

  To rename a directory:

    git annex proxy -- git mv mydir newname

* `resolvemerge`

  Resolves a conflicted merge, by adding both conflicting versions of the
  file to the tree, using variants of their filename. This is done
  automatically when using `git annex sync` or `git annex merge`.

  Note that only merge conflicts that involve an annexed file are resolved.
  Merge conflicts between two files that are not annexed will not be
  automatically resolved.

* `diffdriver`

  This is an external git diff driver shim. Normally, when using `git diff`
  with an external git driver, the symlinks to annexed files are not set up
  right, so the external git driver cannot read them in order to perform
  smart diffing of their contents. This command works around the problem,
  by passing the fixed up files to the real external diff driver.

  To use, just configure git to use "git-annex diffdriver -- cmd params --"
  as the external diff command, where cmd is the real external diff
  command you want to use, and params are any extra parameters to pass
  to it. Note the trailing "--", which is required.

  For example, set `GIT_EXTERNAL_DIFF=git-annex diffdriver -- j-c-diff --`

* `remotedaemon`

  Detects when network remotes have received git pushes and fetches from them.

* `xmppgit`

  This command is used internally to perform git pulls over XMPP.

# TESTING COMMANDS

* `test`

  This runs git-annex's built-in test suite.

  There are several parameters, provided by Haskell's tasty test framework.
  Pass --help for details.

* `testremote remote`

  This tests a remote by generating some random objects and sending them to
  the remote, then redownloading them, removing them from the remote, etc.

  It's safe to run in an existing repository (the repository contents are
  not altered), although it may perform expensive data transfers.

  To perform a smaller set of tests, use --fast.

  The --size option can be used to tune the size of the generated objects.

  Testing a single remote will use the remote's configuration,
  automatically varying the chunk sizes, and with simple shared encryption
  enabled and disabled.

* `fuzztest`

  Generates random changes to files in the current repository,
  for use in testing the assistant. This is dangerous, so it will not
  do anything unless --forced.

# OPTIONS

* `--force`

  Force unsafe actions, such as dropping a file's content when no other
  source of it can be verified to still exist, or adding ignored files.
  Use with care.

* `--fast`

  Enable less expensive, but also less thorough versions of some commands.
  What is avoided depends on the command.

* `--auto`

  Enable automatic mode. Commands that get, drop, or move file contents
  will only do so when needed to help satisfy the setting of numcopies,
  and preferred content configuration.

* `--all`

  Operate on all data that has been stored in the git annex,
  including old versions of files. This is the default behavior when
  running git-annex in a bare repository; in a non-bare repository the
  normal behavior is to only operate on specified files in the working
  tree.

* `--unused`

  Operate on all data that has been determined to be unused by
  a previous run of `git-annex unused`.

* `--key=key`

  Operate on only the specified key.

* `--quiet`

  Avoid the default verbose display of what is done; only show errors
  and progress displays.

* `--verbose`

  Enable verbose display.

* `--json`

  Rather than the normal output, generate JSON. This is intended to be
  parsed by programs that use git-annex. Each line of output is a JSON
  object. Note that JSON output is only usable with some git-annex commands,
  like info, find, whereis, and metadata.

* `--debug`

  Show debug messages.

* `--no-debug`

  Disable debug messages.

* `--from=repository`

  Specifies a repository that content will be retrieved from, or that
  should otherwise be acted on.

  It should be specified using the name of a configured remote.

* `--to=repository`

  Specifies a repository that content will be sent to.

  It should be specified using the name of a configured remote.

* `--numcopies=n`

  Overrides the numcopies setting, forcing git-annex to ensure the
  specified number of copies exist.

  Note that setting numcopies to 0 is very unsafe.

* `--time-limit=time`

  Limits how long a git-annex command runs. The time can be something
  like "5h", or "30m" or even "45s" or "10d".

  Note that git-annex may continue running a little past the specified
  time limit, in order to finish processing a file.

  Also, note that if the time limit prevents git-annex from doing all it
  was asked to, it will exit with a special code, 101.

* `--trust=repository`
* `--semitrust=repository`
* `--untrust=repository`

  Overrides trust settings for a repository. May be specified more than once.

  The repository should be specified using the name of a configured remote,
  or the UUID or description of a repository.

* `--trust-glacier-inventory`

  Amazon Glacier inventories take hours to retrieve, and may not represent
  the current state of a repository. So git-annex does not trust that
  files that the inventory claims are in Glacier are really there.
  This switch can be used to allow it to trust the inventory.

  Be careful using this, especially if you or someone else might have recently
  removed a file from Glacier. If you try to drop the only other copy of the
  file, and this switch is enabled, you could lose data!

* `--backend=name`

  Specifies which key-value backend to use. This can be used when
  adding a file to the annex, or migrating a file. Once files
  are in the annex, their backend is known and this option is not
  necessary.

* `--format=value`

  Specifies a custom output format. The value is a format string, 
  in which '${var}' is expanded to the value of a variable. To right-justify
  a variable with whitespace, use '${var;width}' ; to left-justify
  a variable, use '${var;-width}'; to escape unusual characters in a variable,
  use '${escaped_var}'

  Also, '\\n' is a newline, '\\000' is a NULL, etc.

* `--user-agent=value`

  Overrides the User-Agent to use when downloading files from the web.

* `--notify-finish`

  Caused a desktop notification to be displayed after each successful
  file download and upload.

  (Only supported on some platforms, e.g. Linux with dbus. A no-op when
  not supported.)

* `--notify-start`

  Caused a desktop notification to be displayed when a file upload
  or download has started, or when a file is dropped.

* `-c name=value`

  Overrides git configuration settings. May be specified multiple times.

# MATCHING OPTIONS

These options can all be specified multiple times, and can be combined to
limit which files git-annex acts on.

Arbitrarily complicated expressions can be built using these options.
For example:

	--exclude '*.mp3' --and --not -( --in=usbdrive --or --in=archive -)

The above example prevents git-annex from working on mp3 files whose
file contents are present at either of two repositories.

* `--exclude=glob`

  Skips files matching the glob pattern. The glob is matched relative to
  the current directory. For example:

        	--exclude='*.mp3' --exclude='subdir/*'

  Note that this will not match anything when using --all or --unused.

* `--include=glob`

  Skips files not matching the glob pattern.  (Same as `--not --exclude`.)
  For example, to include only mp3 and ogg files:

        	--include='*.mp3' --or --include='*.ogg'

  Note that this will not skip anything when using --all or --unused.

* `--in=repository`

  Matches only files that git-annex believes have their contents present
  in a repository. Note that it does not check the repository to verify
  that it still has the content.

  The repository should be specified using the name of a configured remote,
  or the UUID or description of a repository. For the current repository,
  use `--in=here`

* `--in=repository@{date}`

  Matches files currently in the work tree whose content was present in
  the repository on the given date.

  The date is specified in the same syntax documented in
  gitrevisions(7). Note that this uses the reflog, so dates far in the
  past cannot be queried.

  For example, you might need to run `git annex drop .` to temporarily
  free up disk space. The next day, you can get back the files you dropped
  using `git annex get . --in=here@{yesterday}`

* `--copies=number`

  Matches only files that git-annex believes to have the specified number
  of copies, or more. Note that it does not check remotes to verify that
  the copies still exist.

* `--copies=trustlevel:number`

  Matches only files that git-annex believes have the specified number of
  copies, on remotes with the specified trust level. For example,
  `--copies=trusted:2`

  To match any trust level at or higher than a given level,
  use 'trustlevel+'. For example, `--copies=semitrusted+:2`

* `--copies=groupname:number`

  Matches only files that git-annex believes have the specified number of
  copies, on remotes in the specified group. For example,
  `--copies=archive:2`

* `--lackingcopies=number`

  Matches only files that git-annex believes need the specified number or 
  more additional copies to be made in order to satisfy their numcopies
  settings.

* `--approxlackingcopies=number`

  Like lackingcopies, but does not look at .gitattributes annex.numcopies
  settings. This makes it significantly faster.

* `--inbackend=name`

  Matches only files whose content is stored using the specified key-value
  backend.

* `--inallgroup=groupname`

  Matches only files that git-annex believes are present in all repositories
  in the specified group.

* `--smallerthan=size`
* `--largerthan=size`

  Matches only files whose content is smaller than, or larger than the
  specified size.

  The size can be specified with any commonly used units, for example,
  "0.5 gb" or "100 KiloBytes"

* `--metadata field=glob`

  Matches only files that have a metadata field attached with a value that
  matches the glob. The values of metadata fields are matched case
  insensitively.

* `--want-get`

  Matches files that the preferred content settings for the repository
  make it want to get. Note that this will match even files that are
  already present, unless limited with e.g., `--not --in .`
  
  Note that this will not match anything when using --all or --unused.

* `--want-drop`

  Matches files that the preferred content settings for the repository
  make it want to drop. Note that this will match even files that have
  already been dropped, unless limited with e.g., `--in .`
  
  Note that this will not match anything when using --all or --unused.

* `--not`

  Inverts the next matching option. For example, to only act on
  files with less than 3 copies, use `--not --copies=3`

* `--and`

  Requires that both the previous and the next matching option matches.
  The default.

* `--or`

  Requires that either the previous, or the next matching option matches.

* `-(`

  Opens a group of matching options.

* `-)`

  Closes a group of matching options.

# PREFERRED CONTENT

Each repository has a preferred content setting, which specifies content
that the repository wants to have present. These settings can be configured
using `git annex vicfg` or `git annex wanted`.
They are used by the `--auto` option, and by the git-annex assistant.

The preferred content settings are similar, but not identical to
the matching options specified above, just without the dashes.
For example:

	exclude=archive/* and (include=*.mp3 or smallerthan=1mb)

The main differences are that `exclude=` and `include=` always
match relative to the top of the git repository, and that there is
no equivilant to `--in`.

When a repository is in one of the standard predefined groups, like "backup"
and "client", setting its preferred content to "standard" will use a
built-in preferred content expression developed for that group.

# SCHEDULED JOBS

The git-annex assistant daemon can be configured to run scheduled jobs.
This is similar to cron and anacron (and you can use them if you prefer),
but has the advantage of being integrated into git-annex, and so being able
to e.g., fsck a repository on a removable drive when the drive gets
connected.

The scheduled jobs can be configured using `git annex vicfg` or
`git annex schedule`.

These actions are available: "fsck self", "fsck UUID" (where UUID
is the UUID of a remote to fsck). After the action comes the duration
to allow the action to run, and finally the schedule of when to run it.

To schedule multiple jobs, separate them with "; ".

Some examples:

	fsck self 30m every day at any time
	fsck self 1h every month at 3 AM
	fsck self 1h on day 1 of every month at any time
	fsck self 1h every week divisible by 2 at any time

# CONFIGURATION VIA .git/config

Like other git commands, git-annex is configured via `.git/config`.
Here are all the supported configuration settings.

* `annex.uuid`

  A unique UUID for this repository (automatically set).

* `annex.backends`

  Space-separated list of names of the key-value backends to use.
  The first listed is used to store new files by default.

* `annex.diskreserve`

  Amount of disk space to reserve. Disk space is checked when transferring
  content to avoid running out, and additional free space can be reserved
  via this option, to make space for more important content (such as git
  commit logs). Can be specified with any commonly used units, for example,
  "0.5 gb", "500M", or "100 KiloBytes"

  The default reserve is 1 megabyte.

* `annex.largefiles`

  Allows configuring which files `git annex add` and the assistant consider
  to be large enough to need to be added to the annex. By default,
  all files are added to the annex.

  The value is a preferred content expression. See PREFERRED CONTENT
  for details.

  Example:

        	annex.largefiles = largerthan=100kb and not (include=*.c or include=*.h)

* `annex.numcopies`

  This is a deprecated setting. You should instead use the
  `git annex numcopies` command to configure how many copies of files
  are kept across all repositories.

  This config setting is only looked at when `git annex numcopies` has
  never been configured.

  Note that setting numcopies to 0 is very unsafe.

* `annex.genmetadata`

  Set this to `true` to make git-annex automatically generate some metadata
  when adding files to the repository.

  In particular, it stores year and month metadata, from the file's
  modification date.

  When importfeed is used, it stores additional metadata from the feed.

* `annex.queuesize`

  git-annex builds a queue of git commands, in order to combine similar
  commands for speed. By default the size of the queue is limited to
  10240 commands; this can be used to change the size. If you have plenty
  of memory and are working with very large numbers of files, increasing
  the queue size can speed it up.

* `annex.bloomcapacity`

  The `git annex unused` command uses a bloom filter to determine
  what data is no longer used. The default bloom filter is sized to handle
  up to 500000 keys. If your repository is larger than that,
  you can adjust this to avoid `git annex unused` not noticing some unused
  data files. Increasing this will make `git-annex unused` consume more memory;
  run `git annex info` for memory usage numbers.

* `annex.bloomaccuracy`

  Adjusts the accuracy of the bloom filter used by
  `git annex unused`. The default accuracy is 1000 --
  1 unused file out of 1000 will be missed by `git annex unused`. Increasing
  the accuracy will make `git annex unused` consume more memory;
  run `git annex info` for memory usage numbers.

* `annex.sshcaching`

  By default, git-annex caches ssh connections using ssh's
  ControlMaster and ControlPersist settings
  (if built using a new enough ssh). To disable this, set to `false`.

* `annex.alwayscommit`

  By default, git-annex automatically commits data to the git-annex branch
  after each command is run. If you have a series
  of commands that you want to make a single commit, you can
  run the commands with `-c annex.alwayscommit=false`. You can later
  commit the data by running `git annex merge` (or by automatic merges)
  or `git annex sync`.

* `annex.hardlink`

  Set this to `true` to make file contents be hard linked into the
  repository when possible, instead of a more expensive copy.

  Use with caution -- This can invalidate numcopies counting, since
  with hard links, fewer copies of a file can exist. So, it is a good
  idea to mark a repository using this setting as untrusted.

  When a repository is set up using `git clone --shared`, git-annex init
  will automatically set annex.hardlink and mark the repository as
  untrusted.

* `annex.delayadd`

  Makes the watch and assistant commands delay for the specified number of
  seconds before adding a newly created file to the annex. Normally this
  is not needed, because they already wait for all writers of the file
  to close it. On Mac OSX, when not using direct mode this defaults to
  1 second, to work around a bad interaction with software there.

* `annex.expireunused`

  Controls what the assistant does about unused file contents
  that are stored in the repository.

  The default is `false`, which causes
  all old and unused file contents to be retained, unless the assistant
  is able to move them to some other repository (such as a backup repository).

  Can be set to a time specification, like "7d" or "1m", and then
  file contents that have been known to be unused for a week or a
  month will be deleted.

* `annex.fscknudge`

  When set to false, prevents the webapp from reminding you when using
  repositories that lack consistency checks.

* `annex.autoupgrade`

  When set to ask (the default), the webapp will check for new versions
  and prompt if they should be upgraded to. When set to true, automatically
  upgrades without prompting (on some supported platforms). When set to
  false, disables any upgrade checking.

  Note that upgrade checking is only done when git-annex is installed
  from one of the prebuilt images from its website. This does not
  bypass e.g., a Linux distribution's own upgrade handling code.

  This setting also controls whether to restart the git-annex assistant
  when the git-annex binary is detected to have changed. That is useful
  no matter how you installed git-annex.

* `annex.autocommit`

  Set to false to prevent the git-annex assistant from automatically
  committing changes to files in the repository.

* `annex.startupscan`

  Set to false to prevent the git-annex assistant from scanning the
  repository for new and changed files on startup. This will prevent it
  from noticing changes that were made while it was not running, but can be
  a useful performance tweak for a large repository.

* `annex.listen`

  Configures which address the webapp listens on. The default is localhost.
  Can be either an IP address, or a hostname that resolves to the desired
  address.

* `annex.debug`

  Set to true to enable debug logging by default.

* `annex.version`

  Automatically maintained, and used to automate upgrades between versions.

* `annex.direct`

  Set to true when the repository is in direct mode. Should not be set
  manually; use the "git annex direct" and "git annex indirect" commands
  instead.

* `annex.crippledfilesystem`

  Set to true if the repository is on a crippled filesystem, such as FAT,
  which does not support symbolic links, or hard links, or unix permissions.
  This is automatically probed by "git annex init".

* `remote.<name>.annex-cost`

  When determining which repository to
  transfer annexed files from or to, ones with lower costs are preferred.
  The default cost is 100 for local repositories, and 200 for remote
  repositories.

* `remote.<name>.annex-cost-command`

  If set, the command is run, and the number it outputs is used as the cost.
  This allows varying the cost based on e.g., the current network. The
  cost-command can be any shell command line.

* `remote.<name>.annex-start-command`

  A command to run when git-annex begins to use the remote. This can
  be used to, for example, mount the directory containing the remote.

  The command may be run repeatedly when multiple git-annex processes
  are running concurrently.

* `remote.<name>.annex-stop-command`

  A command to run when git-annex is done using the remote.

  The command will only be run once *all* running git-annex processes
  are finished using the remote.

* `remote.<name>.annex-shell`

  Specify an alternative git-annex-shell executable on the remote
  instead of looking for "git-annex-shell" on the PATH.

  This is useful if the git-annex-shell program is outside the PATH
  or has a non-standard name.

* `remote.<name>.annex-ignore`

  If set to `true`, prevents git-annex
  from storing file contents on this remote by default.
  (You can still request it be used by the `--from` and `--to` options.)

  This is, for example, useful if the remote is located somewhere
  without git-annex-shell. (For example, if it's on GitHub).
  Or, it could be used if the network connection between two
  repositories is too slow to be used normally.

  This does not prevent git-annex sync (or the git-annex assistant) from
  syncing the git repository to the remote.

* `remote.<name>.annex-sync`

  If set to `false`, prevents git-annex sync (and the git-annex assistant)
  from syncing with this remote.

* `remote.<name>.annex-readonly`

  If set to `true`, prevents git-annex from making changes to a remote.
  This both prevents git-annex sync from pushing changes, and prevents
  storing or removing files from read-only remote.

* `remote.<name>.annexUrl`

  Can be used to specify a different url than the regular `remote.<name>.url`
  for git-annex to use when talking with the remote. Similar to the `pushUrl`
  used by git-push.

* `remote.<name>.annex-uuid`

  git-annex caches UUIDs of remote repositories here.

* `remote.<name>.annex-trustlevel`

  Configures a local trust level for the remote. This overrides the value
  configured by the trust and untrust commands. The value can be any of
  "trusted", "semitrusted" or "untrusted".

* `remote.<name>.annex-availability`

  Can be used to tell git-annex whether a remote is LocallyAvailable
  or GloballyAvailable. Normally, git-annex determines this automatically.

* `remote.<name>.annex-bare`

  Can be used to tell git-annex if a remote is a bare repository
  or not. Normally, git-annex determines this automatically.

* `remote.<name>.annex-ssh-options`

  Options to use when using ssh to talk to this remote.

* `remote.<name>.annex-rsync-options`

  Options to use when using rsync
  to or from this remote. For example, to force ipv6, and limit
  the bandwidth to 100Kbyte/s, set it to `-6 --bwlimit 100`

* `remote.<name>.annex-rsync-upload-options`

  Options to use when using rsync to upload a file to a remote.

  These options are passed after other applicable rsync options,
  so can be used to override them. For example, to limit upload bandwidth
  to 10Kbyte/s, set `--bwlimit 10`.

* `remote.<name>.annex-rsync-download-options`

  Options to use when using rsync to download a file from a remote.

  These options are passed after other applicable rsync options,
  so can be used to override them.

* `remote.<name>.annex-rsync-transport`

  The remote shell to use to connect to the rsync remote. Possible
  values are `ssh` (the default) and `rsh`, together with their
  arguments, for instance `ssh -p 2222 -c blowfish`; Note that the
  remote hostname should not appear there, see rsync(1) for details.
  When the transport used is `ssh`, connections are automatically cached
  unless `annex.sshcaching` is unset.

* `remote.<name>.annex-bup-split-options`

  Options to pass to bup split when storing content in this remote.
  For example, to limit the bandwidth to 100Kbyte/s, set it to `--bwlimit 100k`
  (There is no corresponding option for bup join.)

* `remote.<name>.annex-gnupg-options`

  Options to pass to GnuPG for symmetric encryption. For instance, to
  use the AES cipher with a 256 bits key and disable compression, set it
  to `--cipher-algo AES256 --compress-algo none`. (These options take
  precedence over the default GnuPG configuration, which is otherwise
  used.)

* `annex.ssh-options`, `annex.rsync-options`,
  `annex.rsync-upload-options`, `annex.rsync-download-options`,
  `annex.bup-split-options`, `annex.gnupg-options`

  Default options to use if a remote does not have more specific options
  as described above.

* `annex.web-options`

  Options to pass when running wget or curl.
  For example, to force ipv4 only, set it to "-4"

* `annex.quvi-options`

  Options to pass to quvi when using it to find the url to download for a
  video.

* `annex.aria-torrent-options`

  Options to pass to aria2c when using it to download a torrent.

* `annex.http-headers`

  HTTP headers to send when downloading from the web. Multiple lines of
  this option can be set, one per header.

* `annex.http-headers-command`

  If set, the command is run and each line of its output is used as a HTTP
  header. This overrides annex.http-headers.

* `annex.web-download-command`

  Use to specify a command to run to download a file from the web.
  (The default is to use wget or curl.)

  In the command line, %url is replaced with the url to download,
  and %file is replaced with the file that it should be saved to.

* `annex.secure-erase-command`

  This can be set to a command that should be run whenever git-annex
  removes the content of a file from the repository.

  In the command line, %file is replaced with the file that should be
  erased.

  For example, to use the wipe command, set it to `wipe -f %file`.

* `remote.<name>.rsyncurl`

  Used by rsync special remotes, this configures
  the location of the rsync repository to use. Normally this is automatically
  set up by `git annex initremote`, but you can change it if needed.

* `remote.<name>.buprepo`

  Used by bup special remotes, this configures
  the location of the bup repository to use. Normally this is automatically
  set up by `git annex initremote`, but you can change it if needed.

* `remote.<name>.ddarrepo`

  Used by ddar special remotes, this configures
  the location of the ddar repository to use. Normally this is automatically
  set up by `git annex initremote`, but you can change it if needed.

* `remote.<name>.directory`

  Used by directory special remotes, this configures
  the location of the directory where annexed files are stored for this
  remote. Normally this is automatically set up by `git annex initremote`,
  but you can change it if needed.

* `remote.<name>.s3`

  Used to identify Amazon S3 special remotes.
  Normally this is automatically set up by `git annex initremote`.

* `remote.<name>.glacier`

  Used to identify Amazon Glacier special remotes.
  Normally this is automatically set up by `git annex initremote`.

* `remote.<name>.webdav`

  Used to identify webdav special remotes.
  Normally this is automatically set up by `git annex initremote`.

* `remote.<name>.tahoe`

  Used to identify tahoe special remotes.
  Points to the configuration directory for tahoe.

* `remote.<name>.annex-xmppaddress`

  Used to identify the XMPP address of a Jabber buddy.
  Normally this is set up by the git-annex assistant when pairing over XMPP.

* `remote.<name>.gcrypt`

  Used to identify gcrypt special remotes.
  Normally this is automatically set up by `git annex initremote`.

  It is set to "true" if this is a gcrypt remote.
  If the gcrypt remote is accessible over ssh and has git-annex-shell
  available to manage it, it's set to "shell".

* `remote.<name>.hooktype`, `remote.<name>.externaltype`

  Used by hook special remotes and external special remotes to record
  the type of the remote.

* `annex.tune.objecthashdirectories`, `annex.tune.objecthashlower`, `annex.tune.branchhashdirectories`

  These can be passed to `git annex init` to tune the repository.
  They cannot be safely changed in a running repository.
  For details, see <http://git-annex.branchable.com/tuning/>.

# CONFIGURATION VIA .gitattributes

The key-value backend used when adding a new file to the annex can be
configured on a per-file-type basis via `.gitattributes` files. In the file,
the `annex.backend` attribute can be set to the name of the backend to
use. For example, this here's how to use the WORM backend by default,
but the SHA256E backend for ogg files:

	* annex.backend=WORM
	*.ogg annex.backend=SHA256E

The numcopies setting can also be configured on a per-file-type basis via
the `annex.numcopies` attribute in `.gitattributes` files. This overrides
other numcopies settings.
For example, this makes two copies be needed for wav files and 3 copies
for flac files:

	*.wav annex.numcopies=2
	*.flac annex.numcopies=3

Note that setting numcopies to 0 is very unsafe.

These settings are honored by git-annex whenever it's operating on a
matching file. However, when using --all, --unused, or --key to specify
keys to operate on, git-annex is operating on keys and not files, so will
not honor the settings from .gitattributes.

Also note that when using views, only the toplevel .gitattributes file is
preserved in the view, so other settings in other files won't have any
effect.

# FILES

These files are used by git-annex:

`.git/annex/objects/` in your git repository contains the annexed file
contents that are currently available. Annexed files in your git
repository symlink to that content.

`.git/annex/` in your git repository contains other run-time information
used by git-annex.

`~/.config/git-annex/autostart` is a list of git repositories
to start the git-annex assistant in.

`.git/hooks/pre-commit-annex` in your git repository will be run whenever
a commit is made, either by git commit, git-annex sync, or the git-annex
assistant.

# SEE ALSO

Most of git-annex's documentation is available on its web site,
<http://git-annex.branchable.com/>

If git-annex is installed from a package, a copy of its documentation
should be included, in, for example, `/usr/share/doc/git-annex/`.

# AUTHOR

Joey Hess <id@joeyh.name>

<http://git-annex.branchable.com/>

Warning: Automatically converted into a man page by mdwn2man. Edit with care.