license the webapp under the AGPL 3+

This means that anyone serving up the webapp to users as a service
(ie, without providing any git-annex binary at all to the user) still needs
to provide a link to the source code for it, including any modifications
they may make.

This may make git-annex be covered by the AGPL as a whole when it is built
with the webapp. If in doubt, you should ask a lawyer.

When git-annex is built with the webapp disabled, no AGPLed code is used.
Even building in the assistant does not pull in AGPLed code.

16 files changed, 0 insertions, 435 deletions

diff --git a/templates/configurators/adddrive.hamlet b/templates/configurators/adddrive.hamlet
deleted file mode 100644
index 948c9f1ee..000000000
--- a/templates/configurators/adddrive.hamlet
+++ /dev/null
@@ -1,39 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Adding a removable drive
-  <p>
-    Clone this repository to a USB drive, memory stick, or other #
-    removable media. Whenever the removable drive is plugged in, its
-    content will be synced with the content of this repository.
-  <p>
-  $if (null writabledrives)
-    <div .span6 .alert .alert-error .alert-block>
-      $if (null removabledrives)
-        <h4 .alert-heading>
-          No removable drives found
-        Please make sure you have a removable drive plugged in and mounted.
-      $else
-        <h4 .alert-heading>
-          No usable removable drives found
-        Seems you cannot write to any of the removable drives that are #
-        currently mounted. Try plugging in a removable drive that you can #
-        write to, or correcting the write permissions.
-      <p>
-        <a .btn .btn-primary href="@{AddDriveR}">
-          Rescan for removable drives
-  $else
-    <form enctype=#{enctype}>
-      <fieldset>
-        ^{form}
-        ^{authtoken}
-        <button .btn .btn-primary type=submit onclick="$('#clonemodal').modal('show');">Use this drive</button> #
-        <a .btn href="@{AddDriveR}">
-          Rescan for removable drives
-<div .modal .fade #clonemodal>
-  <div .modal-header>
-    <h3>
-      Cloning to drive
-  <div .modal-body>
-    <p>
-      Cloning the repository to the drive. This may take a few minutes; #
-      do not remove the drive.
diff --git a/templates/configurators/addrsync.net.hamlet b/templates/configurators/addrsync.net.hamlet
deleted file mode 100644
index 6ea55ae12..000000000
--- a/templates/configurators/addrsync.net.hamlet
+++ /dev/null
@@ -1,43 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Adding a Rsync.net repository
-  <p>
-    <a href="http://rsync.net/">
-      Rsync.net #
-    is a well-respected cloud storage provider. Its rsync repositories are #
-    supported very well by git-annex. #
-    <a href="http://www.rsync.net/products/pricing.html">
-      pricing details
-  <p>
-    $case status
-      $of UnusableServer msg
-        <div .alert .alert-error>
-          <i .icon-warning-sign></i> #{msg}
-      $of _
-        <i .icon-warning-sign></i> #
-        All your data will be synced to the Rsync.net repository, so make #
-        sure it has enough available space. Your data will be encrypted before #
-        it is sent to Rsync.net.
-  <p>
-    When you sign up for a Rsync.net account, you receive an #
-    email from them with a host name and a username. Fill that #
-    information in below. You also likely don't want to use your whole #
-    rsync.net repository for git-annex alone, so git-annex will use a #
-    subdirectory of it, as configured below.
-  <p>
-    <form .form-horizontal enctype=#{enctype}>
-      <fieldset>
-        ^{form}
-        ^{authtoken}
-        <div .form-actions>
-          <button .btn .btn-primary type=submit onclick="$('#testmodal').modal('show');">
-            Use this rsync.net repository
-<div .modal .fade #testmodal>
-  <div .modal-header>
-    <h3>
-      Making repository ...
-  <div .modal-body>
-    <p>
-      Setting up your rsync.net repository. This could take a minute.
-    <p>
-      You may be prompted for your rsync.net ssh password.
diff --git a/templates/configurators/enabledirectory.hamlet b/templates/configurators/enabledirectory.hamlet
deleted file mode 100644
index 03da311c5..000000000
--- a/templates/configurators/enabledirectory.hamlet
+++ /dev/null
@@ -1,10 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Enabling #{description}
-  <p>
-    Where is this repository located?
-  <p>
-    <a .btn href="@{AddDriveR}">
-      On a removable drive
-    <a .btn href="@{RepositoriesR}">
-      Cancel
diff --git a/templates/configurators/intro.hamlet b/templates/configurators/intro.hamlet
deleted file mode 100644
index c1642b061..000000000
--- a/templates/configurators/intro.hamlet
+++ /dev/null
@@ -1,28 +0,0 @@
-<div .span9 ##{ident} .hero-unit>
-  $maybe reldir <- relDir webapp
-   <h2>
-      git-annex is watching over your files in <small><tt>#{reldir}</tt></small>
-    <p>
-      It will automatically notice changes, and keep files in sync between #
-      $if notenough
-        repositories on your devices ...
-        <h2>
-          But no other repositories are set up yet.
-        <a .btn .btn-primary .btn-large href="@{RepositoriesR}">Add another repository</a>
-      $else
-        $if barelyenough
-          <span .badge .badge-warning>#{numrepos}</span>
-        $else
-          <span .badge .badge-success>#{numrepos}</span>
-        \ repositories and devices:
-        <table .table .table-striped .table-condensed>
-          <tbody>
-            $forall (num, name, _) <- repolist
-              <tr>
-                <td>
-                  #{num}
-                <td>
-                  #{name}
-        <a .btn .btn-primary .btn-large href="@{RepositoriesR}">Add another repository</a>
-        <p>
-          Or just sit back, watch the magic, and get on with using your files.
diff --git a/templates/configurators/main.hamlet b/templates/configurators/main.hamlet
deleted file mode 100644
index b0fdcc282..000000000
--- a/templates/configurators/main.hamlet
+++ /dev/null
@@ -1,9 +0,0 @@
-<div .span9>
-  <div .row-fluid>
-    <div .span4>
-      <h3>
-        <a href="@{RepositoriesR}">
-          Manage repositories
-     <p>
-       Distribute the files in this repository to other devices, #
-       make backups, and more, by adding repositories.
diff --git a/templates/configurators/newrepository.hamlet b/templates/configurators/newrepository.hamlet
deleted file mode 100644
index d2bdad9b9..000000000
--- a/templates/configurators/newrepository.hamlet
+++ /dev/null
@@ -1,15 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Add another repository
-  <p>
-    The form below will make a separate repository, that is not synced #
-    with your existing repository. You can use the new repository for #
-    different sorts of files, that are synced and shared with other #
-    devices and users.
-  <p>
-    <form .form-inline enctype=#{enctype}>
-      ^{form}
-  <p>
-    <i .icon-asterisk></i> #
-    Do you want to add another repository that is kept in sync with #
-    the current one? If so, <a href="@{RepositoriesR}">go here</a>.
diff --git a/templates/configurators/newrepository/first.hamlet b/templates/configurators/newrepository/first.hamlet
deleted file mode 100644
index 88b1fa72b..000000000
--- a/templates/configurators/newrepository/first.hamlet
+++ /dev/null
@@ -1,14 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Welcome to git-annex!
-  <p>
-    There's just one thing to do before you can start using the power #
-    and convenience of git-annex.
-  <h2>
-    Create a git-annex repository
-  <p>
-    Files in this repository will managed by git-annex, #
-    and kept in sync with your repositories on other devices.
-  <p>
-    <form .form-inline enctype=#{enctype}>
-      ^{form}
diff --git a/templates/configurators/newrepository/form.hamlet b/templates/configurators/newrepository/form.hamlet
deleted file mode 100644
index 6c2405be6..000000000
--- a/templates/configurators/newrepository/form.hamlet
+++ /dev/null
@@ -1,11 +0,0 @@
-#{msg}
-<p>
-  <div .input-prepend .input-append>
-    <span .add-on>
-      <i .icon-folder-open></i>
-    ^{fvInput pathView}
-    <button type=submit .btn .btn-primary>
-      Make Repository
-$if err
-  <div .alert .alert-error>
-    #{errmsg}
diff --git a/templates/configurators/pairing/disabled.hamlet b/templates/configurators/pairing/disabled.hamlet
deleted file mode 100644
index c946aacc4..000000000
--- a/templates/configurators/pairing/disabled.hamlet
+++ /dev/null
@@ -1,5 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Pairing not supported
-  <p>
-    This build of git-annex does not support pairing. Sorry!
diff --git a/templates/configurators/pairing/inprogress.hamlet b/templates/configurators/pairing/inprogress.hamlet
deleted file mode 100644
index da783a764..000000000
--- a/templates/configurators/pairing/inprogress.hamlet
+++ /dev/null
@@ -1,18 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Pairing in progress ..
-  $if T.null secret
-    <p>
-      You do not need to leave this page open; pairing will finish #
-      automatically.
-  $else
-    <p>
-      Now you should either go tell the owner of the computer you want to pair #
-      with the secret phrase you selected ("#{secret}"), or go enter it into #
-      the computer you want to pair with.
-    <p>
-      You do not need to leave this page open; pairing will finish automatically #
-      as soon as the secret phrase is entered into the other computer.
-    <p>
-      If you're not seeing a pair request on the other computer, try moving #
-      it to the same switch or wireless network as this one.
diff --git a/templates/configurators/pairing/prompt.hamlet b/templates/configurators/pairing/prompt.hamlet
deleted file mode 100644
index 1d27b1837..000000000
--- a/templates/configurators/pairing/prompt.hamlet
+++ /dev/null
@@ -1,50 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Pairing with a local computer
-  <p>
-    $if start
-      Pair with a computer on your local network (or VPN), and the #
-      two git annex repositories will be combined into one, with changes #
-      kept in sync between them.
-    $else
-      Pairing with #{username}@#{hostname} will combine the two git annex #
-      repositories into one, with changes kept in sync between them.
-  <p>
-    $if start
-      For security, enter a secret phrase. This same secret phrase will #
-      also need to be entered on the computer you're pairing with. #
-      It will be used to verify you're pairing with the right computer.
-    $else
-      $if sameusername
-        For security, you need to enter the same secret phrase that was #
-        entered on #{hostname} when the pairing was started.
-      $else
-        For security, a secret phrase has been selected, which you need #
-        to enter here to finish the pairing. If you don't know the #
-        phrase, go ask #{username} ...
-  $if badphrase
-    <div .alert .alert-error>
-      <i .icon-warning-sign></i> #{problem}
-  <p>
-    <form .form-horizontal enctype=#{enctype}>
-      <fieldset>
-        ^{form}
-        ^{authtoken}
-        <div .form-actions>
-          <button .btn .btn-primary type=submit>
-            $if start
-              Start pairing
-            $else
-              Finish pairing
-    <div .alert .alert-info>
-      $if start
-        <p>
-          A good secret phrase is reasonably long. You'll only #
-          type it a few times. Only letters and numbers matter; #
-          punctuation and white space is ignored.
-        <p>
-          A quotation is one good choice, something like: #
-          "#{sampleQuote}"
-      $else
-        Only letters and numbers matter; punctuation and spaces are #
-        ignored.
diff --git a/templates/configurators/repositories.hamlet b/templates/configurators/repositories.hamlet
deleted file mode 100644
index 8411ce350..000000000
--- a/templates/configurators/repositories.hamlet
+++ /dev/null
@@ -1,78 +0,0 @@
-<div .span9>
-  <h2>
-    Your repositories
-  <table .table .table-condensed>
-    <tbody>
-      $forall (num, name, needsenabled) <- repolist
-        <tr>
-          <td>
-            #{num}
-          <td>
-            $if isJust needsenabled
-              <i>#{name}
-            $else
-              #{name}
-          <td>
-            $maybe enable <- needsenabled
-              <i>not enabled here #
-              &rarr; #
-              <a href="@{enable}">
-                enable
-  <div .row-fluid>
-    <div .span6>
-      <h2>
-        Add more repositories
-
-      <h3>
-        <a href="@{AddDriveR}">
-          <i .icon-plus-sign></i> Removable drive
-      <p>
-        Clone this repository to a USB drive, memory stick, or other #
-        removable media.
-      <p>
-        For offline archiving, backups, or to #
-        <a href="http://en.wikipedia.org/wiki/Sneakernet">SneakerNet</a> #
-        between computers. 
-
-      <h3>
-        <a href="@{StartPairR}">
-          <i .icon-plus-sign></i> Local computer
-      <p>
-        Pair with a local computer to automatically keep files in sync #
-        between computers on your local network.
-      <p>
-        For easy sharing with family and friends, or between your devices.
-
-      <h3>
-        <i .icon-plus-sign></i> Phone
-      <p>
-        Save photos and recordings from your phone.
-      <p>
-        Send selected files to your phone.
-
-    <div .span6>
-      <h2>
-        Store your data in the cloud
-
-      <h3>
-        <a href="@{AddRsyncNetR}">
-          <i .icon-plus-sign></i> Rsync.net
-      <p>
-        Works very well with git-annex.
-
-      <h3>
-        <i .icon-plus-sign></i> Amazon S3
-      <p>
-        Good choice for professional storage quality and low prices.
-
-      <h3>
-        <i .icon-plus-sign></i> Box.com
-      <p>
-        Provides free cloud storage for small amounts of data.
-
-      <h3>
-        <a href="@{AddSshR}">
-          <i .icon-plus-sign></i> Remote server
-      <p>
-        Set up a repository on a remote server using #
-        <tt>ssh</tt>, to build your own personal cloud.
diff --git a/templates/configurators/ssh/add.hamlet b/templates/configurators/ssh/add.hamlet
deleted file mode 100644
index c2336a169..000000000
--- a/templates/configurators/ssh/add.hamlet
+++ /dev/null
@@ -1,33 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Adding a remote server using ssh
-  <p>
-    You can use nearly any server that has ssh and rsync. For example, you #
-    could use a <a href="http://linode.com/">Linode</a> or another VPS, or #
-    an account on a friend's server.
-  <p>
-    $case status
-      $of UnusableServer msg
-        <div .alert .alert-error>
-          <i .icon-warning-sign></i> #{msg}
-      $of _
-        <i .icon-warning-sign></i> Do keep in mind that all your data #
-        will be synced to the server, so make sure it has enough available #
-        disk space and bandwidth, and that you trust it with your data.
-  <p>
-    <form .form-horizontal enctype=#{enctype}>
-      <fieldset>
-        ^{form}
-        ^{authtoken}
-        <div .form-actions>
-          <button .btn .btn-primary type=submit onclick="$('#testmodal').modal('show');">
-            Check this server
-<div .modal .fade #testmodal>
-  <div .modal-header>
-    <h3>
-      Testing server ...
-  <div .modal-body>
-    <p>
-      Checking ssh connection to the server. This could take a minute.
-    <p>
-      You may be prompted for your password to log into the server.
diff --git a/templates/configurators/ssh/confirm.hamlet b/templates/configurators/ssh/confirm.hamlet
deleted file mode 100644
index f82335ceb..000000000
--- a/templates/configurators/ssh/confirm.hamlet
+++ /dev/null
@@ -1,42 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Ready to add remote server
-  <div .row-fluid>
-    <div .span8>
-      <p>
-        The server #{sshHostName sshdata} has been verified to be usable.
-      $if not (rsyncOnly sshdata)
-        <p>
-          You have two options for how to use the server.
-        <p>
-          <a .btn .btn-primary href="@{MakeSshGitR sshdata}" onclick="$('#setupmodal').modal('show');">
-            Use a git repository on the server
-          <br>
-          All your data will be uploaded to the server. If you set up other #
-          devices to use the same server, they will all be kept in sync, #
-          using the server as a central hub. #
-      <p>
-        <a .btn .btn-primary href="@{MakeSshRsyncR sshdata}" onclick="$('#setupmodal').modal('show');">
-          Use an encrypted rsync repository on the server
-        <br>
-        The contents of your files will be stored, fully encrypted, on the #
-        server. The server will not store other information about your #
-        git repository.
-    <div .span4>
-      $if needsPubKey sshdata
-        <div .alert .alert-info>
-          <i .icon-info-sign></i> #
-          A ssh key will be installed on the server, allowing git-annex to #
-          access it securely without a password.
-<div .modal .fade #setupmodal>
-  <div .modal-header>
-    <h3>
-      Making repository ...
-  <div .modal-body>
-    <p>
-      Setting up repository on the remote server. This could take a minute.
-    $if needsPubKey sshdata
-      <p>
-        You will be prompted once more for your ssh password. A ssh key #
-        is being installed on the server, allowing git-annex to access it #
-        securely without a password.
diff --git a/templates/configurators/ssh/enable.hamlet b/templates/configurators/ssh/enable.hamlet
deleted file mode 100644
index 1e35e481b..000000000
--- a/templates/configurators/ssh/enable.hamlet
+++ /dev/null
@@ -1,30 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    Enabling #{description}
-  <p>
-    Another repository uses this server, but the server is not #
-    yet enabled for use here. The first step to enable it is to check if it's #
-    usable here.
-  <p>
-  <p>
-    <form .form-horizontal enctype=#{enctype}>
-      <fieldset>
-        <div .form-actions>
-          <button .btn .btn-primary type=submit onclick="$('#testmodal').modal('show');">
-            Check this server
-        $case status
-          $of UnusableServer msg
-            <div .alert .alert-error>
-              <i .icon-warning-sign></i> #{msg}
-          $of _
-        ^{form}
-        ^{authtoken}
-<div .modal .fade #testmodal>
-  <div .modal-header>
-    <h3>
-      Testing server ...
-  <div .modal-body>
-    <p>
-      Checking ssh connection to the server. This could take a minute.
-    <p>
-      You may be prompted for your password to log into the server.
diff --git a/templates/configurators/ssh/error.hamlet b/templates/configurators/ssh/error.hamlet
deleted file mode 100644
index 05d2de412..000000000
--- a/templates/configurators/ssh/error.hamlet
+++ /dev/null
@@ -1,10 +0,0 @@
-<div .span9 .hero-unit>
-  <h2>
-    <i .icon-warning-sign></i> Failed to make repository
-  <p>
-    Something went wrong setting up the repository on the remote server.
-  <p>
-    Transcript: #{msg}
-  <p>
-    <a .btn .btn-primary href="#">
-     Retry