1 files changed, 484 insertions, 0 deletions

diff --git a/doc/todo/Shorten_long_file_names_preventing_git_checkout.mdwn b/doc/todo/Shorten_long_file_names_preventing_git_checkout.mdwn
new file mode 100644
index 000000000..6f8a68d57
--- /dev/null
+++ b/doc/todo/Shorten_long_file_names_preventing_git_checkout.mdwn
@@ -0,0 +1,484 @@
+Submitting here from https://github.com/joeyh/git-annex/pull/36
+
+    commit 05b7e0d2e87c1c92df773d72ee0ac7c9638be058
+    Author: Eric OConnor <eric@oco.nnor.org>
+    Date:   Sat Feb 28 23:14:50 2015 -0700
+
+        Allow this repository to be checked out in filesystems with 255 char filename limits
+
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known.mdwn b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known.mdwn
+    new file mode 100644
+    index 0000000..69732a7
+    --- /dev/null
+    +++ b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known.mdwn
+    @@ -0,0 +1,46 @@
+    +### Please describe the problem.
+    +
+    +
+    +some time ago i was using the webapp bound to a dedicated port number to get around firewall reconfig. Now after some time without using the webapp i'm using it again and when i start it with 
+    +
+    +     git-annex webapp --listen=192.168.21.12:46199
+    +
+    +it never starts but just keeps waiting forever(?) 
+    +
+    +Update:(to clarify - the following works fine but results in the "random" port "problem")
+    +
+    +    git-annex webapp --listen=192.168.21.12
+    +
+    +
+    +
+    +
+    +### What steps will reproduce the problem?
+    +
+    +
+    +git-annex webapp --listen=192.168.21.12:46199
+    +
+    +
+    +### What version of git-annex are you using? On what operating system?
+    +
+    +
+    +version 5.20140716-g8c14ba8 on debian wheezy using your pre build static tar archive. 
+    +
+    +### Please provide any additional information below.
+    +
+    +[[!format sh """
+    +# If you can, paste a complete transcript of the problem occurring here.
+    +# If the problem is with the git-annex assistant, paste in .git/annex/daemon.log
+    +
+    +
+    +the log output is the following 3 lines 
+    +
+    +[2014-07-23 16:41:45 CEST] main: starting assistant version 5.20140716-g8c14ba8
+    +WebApp crashed: getAddrInfo: does not exist (Name or service not known)
+    +[2014-07-23 16:41:45 CEST] WebApp: warning WebApp crashed: getAddrInfo: does not exist (Name or service not known)
+    +
+    +
+    +
+    +# End of transcript or log.
+    +"""]]
+    +
+    +> [[done]] --[[Joey]] 
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_1_4d1b96911e3e227c7433ccea543872c1._comment b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_1_4d1b96911e3e227c7433ccea543872c1._comment
+    new file mode 100644
+    index 0000000..5808c56
+    --- /dev/null
+    +++ b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_1_4d1b96911e3e227c7433ccea543872c1._comment
+    @@ -0,0 +1,10 @@
+    +[[!comment format=mdwn
+    + username="http://joeyh.name/"
+    + ip="24.159.78.125"
+    + subject="comment 1"
+    + date="2014-07-23T22:10:37Z"
+    + content="""
+    +Support for --listen with a port was removed in version 5.20140306, since it was buggy. In particular, when the webapp creates a new repository, it needs to switch to a new port to serve that repository, so specifying a single port won't work.
+    +
+    +Instead, when annex.listen or --listen specifies the address to listen on, `git annex webapp` will print out the url to use to open it, including the port it picked. This could be used in a script, or clicked on in the terminal to open a local browser when running the webapp on a remote host.
+    +"""]]
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_2_7be98a630e1deb655a4d1675bf622d05._comment b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_2_7be98a630e1deb655a4d1675bf622d05._comment
+    new file mode 100644
+    index 0000000..2dd9885
+    --- /dev/null
+    +++ b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known/comment_2_7be98a630e1deb655a4d1675bf622d05._comment
+    @@ -0,0 +1,8 @@
+    +[[!comment format=mdwn
+    + username="markusk"
+    + ip="79.243.250.79"
+    + subject="comment 2"
+    + date="2014-07-23T23:18:37Z"
+    + content="""
+    +Thank you for the info! Will add the port grep to my auth grep script as you suggested. 
+    +"""]]
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__.mdwn b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__.mdwn
+    deleted file mode 100644
+    index 69732a7..0000000
+    --- a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__.mdwn
+    +++ /dev/null
+    @@ -1,46 +0,0 @@
+    -### Please describe the problem.
+    -
+    -
+    -some time ago i was using the webapp bound to a dedicated port number to get around firewall reconfig. Now after some time without using the webapp i'm using it again and when i start it with 
+    -
+    -     git-annex webapp --listen=192.168.21.12:46199
+    -
+    -it never starts but just keeps waiting forever(?) 
+    -
+    -Update:(to clarify - the following works fine but results in the "random" port "problem")
+    -
+    -    git-annex webapp --listen=192.168.21.12
+    -
+    -
+    -
+    -
+    -### What steps will reproduce the problem?
+    -
+    -
+    -git-annex webapp --listen=192.168.21.12:46199
+    -
+    -
+    -### What version of git-annex are you using? On what operating system?
+    -
+    -
+    -version 5.20140716-g8c14ba8 on debian wheezy using your pre build static tar archive. 
+    -
+    -### Please provide any additional information below.
+    -
+    -[[!format sh """
+    -# If you can, paste a complete transcript of the problem occurring here.
+    -# If the problem is with the git-annex assistant, paste in .git/annex/daemon.log
+    -
+    -
+    -the log output is the following 3 lines 
+    -
+    -[2014-07-23 16:41:45 CEST] main: starting assistant version 5.20140716-g8c14ba8
+    -WebApp crashed: getAddrInfo: does not exist (Name or service not known)
+    -[2014-07-23 16:41:45 CEST] WebApp: warning WebApp crashed: getAddrInfo: does not exist (Name or service not known)
+    -
+    -
+    -
+    -# End of transcript or log.
+    -"""]]
+    -
+    -> [[done]] --[[Joey]] 
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_1_4d1b96911e3e227c7433ccea543872c1._comment b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_1_4d1b96911e3e227c7433ccea543872c1._comment
+    deleted file mode 100644
+    index 5808c56..0000000
+    --- a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_1_4d1b96911e3e227c7433ccea543872c1._comment
+    +++ /dev/null
+    @@ -1,10 +0,0 @@
+    -[[!comment format=mdwn
+    - username="http://joeyh.name/"
+    - ip="24.159.78.125"
+    - subject="comment 1"
+    - date="2014-07-23T22:10:37Z"
+    - content="""
+    -Support for --listen with a port was removed in version 5.20140306, since it was buggy. In particular, when the webapp creates a new repository, it needs to switch to a new port to serve that repository, so specifying a single port won't work.
+    -
+    -Instead, when annex.listen or --listen specifies the address to listen on, `git annex webapp` will print out the url to use to open it, including the port it picked. This could be used in a script, or clicked on in the terminal to open a local browser when running the webapp on a remote host.
+    -"""]]
+    diff --git a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_2_7be98a630e1deb655a4d1675bf622d05._comment b/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_2_7be98a630e1deb655a4d1675bf622d05._comment
+    deleted file mode 100644
+    index 2dd9885..0000000
+    --- a/doc/bugs/_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41_____91__2014-07-23_16:41:45_CEST__93___WebApp:_warning_WebApp_crashed:_getAddrInfo:_does_not_exist___40__Name_or_service_not_known__41__/comment_2_7be98a630e1deb655a4d1675bf622d05._comment
+    +++ /dev/null
+    @@ -1,8 +0,0 @@
+    -[[!comment format=mdwn
+    - username="markusk"
+    - ip="79.243.250.79"
+    - subject="comment 2"
+    - date="2014-07-23T23:18:37Z"
+    - content="""
+    -Thank you for the info! Will add the port grep to my auth grep script as you suggested. 
+    -"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47.mdwn b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47.mdwn
+    new file mode 100644
+    index 0000000..dae654d
+    --- /dev/null
+    +++ b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47.mdwn
+    @@ -0,0 +1,63 @@
+    +### What steps will reproduce the problem?
+    +[[!format sh """
+    +C:\Users\Bruno>mkdir annex
+    +
+    +C:\Users\Bruno>cd annex
+    +
+    +C:\Users\Bruno\annex>git init
+    +Initialized empty Git repository in C:/Users/Bruno/annex/.git/
+    +
+    +C:\Users\Bruno\annex>git annex init
+    +init
+    +  Detected a crippled filesystem.
+    +
+    +  Enabling direct mode.
+    +
+    +  Detected a filesystem without fifo support.
+    +
+    +  Disabling ssh connection caching.
+    +ok
+    +(Recording state in git...)
+    +
+    +C:\Users\Bruno\annex>echo test > test
+    +
+    +C:\Users\Bruno\annex>git annex add .
+    +add test (checksum...) ok
+    +(Recording state in git...)
+    +
+    +C:\Users\Bruno\annex>git commit -a -m added
+    +[master (root-commit) 2eea610] added
+    + 1 file changed, 1 insertion(+)
+    + create mode 120000 test
+    +
+    +C:\Users\Bruno\annex>git annex sync
+    +(Recording state in git...)
+    +fatal: unable to access '../../../../C:\Users\Bruno\annex\.git/config': Invalid argument
+    +
+    +git-annex: user error (xargs ["-0","git","--git-dir=C:\\Users\\Bruno\\annex\\.git","--work-tree=C:\\Users\\Bruno\\annex","add","-f"] exited 123)
+    +failed
+    +git-annex: sync: 1 failed
+    +"""]]
+    +
+    +### What version of git-annex are you using? On what operating system?
+    +Windows 8 (64 bits)
+    +
+    +git version 1.8.4.msysgit.0
+    +
+    +[[!format sh """
+    +git-annex version: 4.20131008-ge115441
+    +build flags: Pairing Testsuite S3 WebDAV DNS Feeds Quvi TDFA CryptoHash
+    +key/value backends: SHA256E SHA1E SHA512E SHA224E SHA384E SKEIN256E SKEIN512E SHA256 SHA1 SHA512 SHA224 SHA384 SKEIN256 SKEIN512 WORM URL
+    +remote types: git gcrypt S3 bup directory rsync web webdav glacier hook
+    +local repository version: 4
+    +default repository version: 3
+    +supported repository versions: 3 4
+    +upgrade supported from repository versions: 2
+    +"""]]
+    +
+    +### Please provide any additional information below.
+    +C:\Users\Bruno\annex\.git\config exists
+    +
+    +> xargs was one problem; also msysgit seems to just not
+    +> accept DOS style paths anymore in --git-dir or --git-work-tree.
+    +> megaweird. [[fixed|done]] --[[Joey]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment
+    new file mode 100644
+    index 0000000..cc616aa
+    --- /dev/null
+    +++ b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment
+    @@ -0,0 +1,8 @@
+    +[[!comment format=mdwn
+    + username="http://joeyh.name/"
+    + ip="64.134.31.139"
+    + subject="comment 1"
+    + date="2013-10-16T20:42:07Z"
+    + content="""
+    +I don't know what to make of this bug report. You say that \"C:\Users\Bruno\annex.git\config\" exists, but you show the creation of a \"C:\Users\Bruno\annex\", and not the other repository. I cannot reproduce it, even if I first \"git init --bare annex.git\". 
+    +"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment
+    new file mode 100644
+    index 0000000..a40e9cb
+    --- /dev/null
+    +++ b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment
+    @@ -0,0 +1,48 @@
+    +[[!comment format=mdwn
+    + username="https://www.google.com/accounts/o8/id?id=AItOawkGCmVc5qIJaQQgG82Hc5zzBdAVdhe2JEM"
+    + nickname="Bruno"
+    + subject="comment 2"
+    + date="2013-10-16T22:47:46Z"
+    + content="""
+    +There's no other repo yet. I have the same problem when I try to sync between two repos but I simplified the instructions to reproduce the bug easily.
+    +
+    +Here's the instructions on Debian :
+    +[[!format sh \"\"\"
+    +bruno@debian:~$ mkdir annex
+    +bruno@debian:~$ cd annex
+    +bruno@debian:~/annex$ git init
+    +Initialized empty Dépôt git dans /home/bruno/annex/.git/
+    +bruno@debian:~/annex$ git annex init
+    +init  ok
+    +(Recording state in git...)
+    +bruno@debian:~/annex$ echo test > test
+    +bruno@debian:~/annex$ git annex add .
+    +add test (checksum...) ok
+    +(Recording state in git...)
+    +bruno@debian:~/annex$ git commit -a -m added
+    +[master (root-commit) 631049d] added
+    + 1 file changed, 1 insertion(+)
+    + create mode 120000 test
+    +bruno@debian:~/annex$ git annex sync
+    +commit
+    +ok
+    +bruno@debian:~/annex$\"\"\"]]
+    +
+    +It seems --git-dir wants 'c:/...' instead of 'c:\\...'.
+    +
+    +[[!format sh \"\"\"
+    +C:\Users\Bruno\annex>git --git-dir=C:\\Users\\Bruno\\annex\\.git --work-tree=C:\\Users\\Bruno\\annex add -f test
+    +fatal: unable to access '../../../../C:\\Users\\Bruno\\annex\\.git/config': Invalid argument
+    +
+    +C:\Users\Bruno\annex>git --git-dir=C:/Users/Bruno/annex/.git --work-tree=C:\\Users\\Bruno\\annex add -f test
+    +
+    +C:\Users\Bruno\annex>\"\"\"]]
+    +
+    +It's weird that I don't have any problem with the following command:
+    +[[!format sh \"\"\"C:\Users\Bruno\annex>git --git-dir=C:\\Users\\Bruno\\annex\\.git --work-tree=C:\\Users\\Bruno\\annex config -l
+    +core.symlinks=false
+    +core.autocrlf=true
+    +[...]\"\"\"]]
+    +
+    +Maybe there's a problem with `git version 1.8.4.msysgit.0`.
+    +"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_4_b533b1de535a057b7ebf99afc92691ed._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_4_b533b1de535a057b7ebf99afc92691ed._comment
+    new file mode 100644
+    index 0000000..ac4a9e9
+    --- /dev/null
+    +++ b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47/comment_4_b533b1de535a057b7ebf99afc92691ed._comment
+    @@ -0,0 +1,13 @@
+    +[[!comment format=mdwn
+    + username="http://joeyh.name/"
+    + ip="108.236.230.124"
+    + subject="comment 4"
+    + date="2013-10-17T21:49:10Z"
+    + content="""
+    +So this is a problem with msysgit 1.8.4. I have been able to reproduce it with that version. 1.8.3 did not have the problem.
+    +
+    +Seems to perhaps be due to the cygwin xargs flipping git into cygwin path mode somehow. (How all this works is massively complex and confusing to me.)
+    +All the other calls to git with identical parameters work fine. I can also reproduce the problem using some old git 1.7.x in the cygwin terminal.
+    +
+    +BTW, I noticed in your example that you ran \"git commit -a\". You should **never** do that in a [[direct mode]] repository. Read the direct mode documentation to understand why.
+    +"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__.mdwn b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__.mdwn
+    deleted file mode 100644
+    index dae654d..0000000
+    --- a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__.mdwn
+    +++ /dev/null
+    @@ -1,63 +0,0 @@
+    -### What steps will reproduce the problem?
+    -[[!format sh """
+    -C:\Users\Bruno>mkdir annex
+    -
+    -C:\Users\Bruno>cd annex
+    -
+    -C:\Users\Bruno\annex>git init
+    -Initialized empty Git repository in C:/Users/Bruno/annex/.git/
+    -
+    -C:\Users\Bruno\annex>git annex init
+    -init
+    -  Detected a crippled filesystem.
+    -
+    -  Enabling direct mode.
+    -
+    -  Detected a filesystem without fifo support.
+    -
+    -  Disabling ssh connection caching.
+    -ok
+    -(Recording state in git...)
+    -
+    -C:\Users\Bruno\annex>echo test > test
+    -
+    -C:\Users\Bruno\annex>git annex add .
+    -add test (checksum...) ok
+    -(Recording state in git...)
+    -
+    -C:\Users\Bruno\annex>git commit -a -m added
+    -[master (root-commit) 2eea610] added
+    - 1 file changed, 1 insertion(+)
+    - create mode 120000 test
+    -
+    -C:\Users\Bruno\annex>git annex sync
+    -(Recording state in git...)
+    -fatal: unable to access '../../../../C:\Users\Bruno\annex\.git/config': Invalid argument
+    -
+    -git-annex: user error (xargs ["-0","git","--git-dir=C:\\Users\\Bruno\\annex\\.git","--work-tree=C:\\Users\\Bruno\\annex","add","-f"] exited 123)
+    -failed
+    -git-annex: sync: 1 failed
+    -"""]]
+    -
+    -### What version of git-annex are you using? On what operating system?
+    -Windows 8 (64 bits)
+    -
+    -git version 1.8.4.msysgit.0
+    -
+    -[[!format sh """
+    -git-annex version: 4.20131008-ge115441
+    -build flags: Pairing Testsuite S3 WebDAV DNS Feeds Quvi TDFA CryptoHash
+    -key/value backends: SHA256E SHA1E SHA512E SHA224E SHA384E SKEIN256E SKEIN512E SHA256 SHA1 SHA512 SHA224 SHA384 SKEIN256 SKEIN512 WORM URL
+    -remote types: git gcrypt S3 bup directory rsync web webdav glacier hook
+    -local repository version: 4
+    -default repository version: 3
+    -supported repository versions: 3 4
+    -upgrade supported from repository versions: 2
+    -"""]]
+    -
+    -### Please provide any additional information below.
+    -C:\Users\Bruno\annex\.git\config exists
+    -
+    -> xargs was one problem; also msysgit seems to just not
+    -> accept DOS style paths anymore in --git-dir or --git-work-tree.
+    -> megaweird. [[fixed|done]] --[[Joey]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment
+    deleted file mode 100644
+    index cc616aa..0000000
+    --- a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_1_e6f39b2ef55b0daa491f4b6329a906bc._comment
+    +++ /dev/null
+    @@ -1,8 +0,0 @@
+    -[[!comment format=mdwn
+    - username="http://joeyh.name/"
+    - ip="64.134.31.139"
+    - subject="comment 1"
+    - date="2013-10-16T20:42:07Z"
+    - content="""
+    -I don't know what to make of this bug report. You say that \"C:\Users\Bruno\annex.git\config\" exists, but you show the creation of a \"C:\Users\Bruno\annex\", and not the other repository. I cannot reproduce it, even if I first \"git init --bare annex.git\". 
+    -"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment
+    deleted file mode 100644
+    index a40e9cb..0000000
+    --- a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_2_b47d6d188f38a8e4ca5ef5f70afadf6a._comment
+    +++ /dev/null
+    @@ -1,48 +0,0 @@
+    -[[!comment format=mdwn
+    - username="https://www.google.com/accounts/o8/id?id=AItOawkGCmVc5qIJaQQgG82Hc5zzBdAVdhe2JEM"
+    - nickname="Bruno"
+    - subject="comment 2"
+    - date="2013-10-16T22:47:46Z"
+    - content="""
+    -There's no other repo yet. I have the same problem when I try to sync between two repos but I simplified the instructions to reproduce the bug easily.
+    -
+    -Here's the instructions on Debian :
+    -[[!format sh \"\"\"
+    -bruno@debian:~$ mkdir annex
+    -bruno@debian:~$ cd annex
+    -bruno@debian:~/annex$ git init
+    -Initialized empty Dépôt git dans /home/bruno/annex/.git/
+    -bruno@debian:~/annex$ git annex init
+    -init  ok
+    -(Recording state in git...)
+    -bruno@debian:~/annex$ echo test > test
+    -bruno@debian:~/annex$ git annex add .
+    -add test (checksum...) ok
+    -(Recording state in git...)
+    -bruno@debian:~/annex$ git commit -a -m added
+    -[master (root-commit) 631049d] added
+    - 1 file changed, 1 insertion(+)
+    - create mode 120000 test
+    -bruno@debian:~/annex$ git annex sync
+    -commit
+    -ok
+    -bruno@debian:~/annex$\"\"\"]]
+    -
+    -It seems --git-dir wants 'c:/...' instead of 'c:\\...'.
+    -
+    -[[!format sh \"\"\"
+    -C:\Users\Bruno\annex>git --git-dir=C:\\Users\\Bruno\\annex\\.git --work-tree=C:\\Users\\Bruno\\annex add -f test
+    -fatal: unable to access '../../../../C:\\Users\\Bruno\\annex\\.git/config': Invalid argument
+    -
+    -C:\Users\Bruno\annex>git --git-dir=C:/Users/Bruno/annex/.git --work-tree=C:\\Users\\Bruno\\annex add -f test
+    -
+    -C:\Users\Bruno\annex>\"\"\"]]
+    -
+    -It's weird that I don't have any problem with the following command:
+    -[[!format sh \"\"\"C:\Users\Bruno\annex>git --git-dir=C:\\Users\\Bruno\\annex\\.git --work-tree=C:\\Users\\Bruno\\annex config -l
+    -core.symlinks=false
+    -core.autocrlf=true
+    -[...]\"\"\"]]
+    -
+    -Maybe there's a problem with `git version 1.8.4.msysgit.0`.
+    -"""]]
+    diff --git a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_4_b533b1de535a057b7ebf99afc92691ed._comment b/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_4_b533b1de535a057b7ebf99afc92691ed._comment
+    deleted file mode 100644
+    index ac4a9e9..0000000
+    --- a/doc/bugs/fatal:_unable_to_access___39__..__47__..__47__..__47__..__47__C:__92__Users__92____91__...__93____92__annex__92__.git__47__config__39__:_Invalid_argument___40__Windows__41__/comment_4_b533b1de535a057b7ebf99afc92691ed._comment
+    +++ /dev/null
+    @@ -1,13 +0,0 @@
+    -[[!comment format=mdwn
+    - username="http://joeyh.name/"
+    - ip="108.236.230.124"
+    - subject="comment 4"
+    - date="2013-10-17T21:49:10Z"
+    - content="""
+    -So this is a problem with msysgit 1.8.4. I have been able to reproduce it with that version. 1.8.3 did not have the problem.
+    -
+    -Seems to perhaps be due to the cygwin xargs flipping git into cygwin path mode somehow. (How all this works is massively complex and confusing to me.)
+    -All the other calls to git with identical parameters work fine. I can also reproduce the problem using some old git 1.7.x in the cygwin terminal.
+    -
+    -BTW, I noticed in your example that you ran \"git commit -a\". You should **never** do that in a [[direct mode]] repository. Read the direct mode documentation to understand why.
+    -"""]]