remove old closed bugs and todo items to speed up wiki updates and reduce size

Remove closed bugs and todos that were last edited or commented before 2017.

Command line used:

for f in $(grep -l '|done\]\]' -- *.mdwn); do d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2017 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2017 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; done
for f in $(grep -l '\[\[done\]\]' -- *.mdwn); do d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2017 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2017 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; done

1 files changed, 0 insertions, 182 deletions

diff --git a/doc/bugs/Volume_monitor_in_GNOME_3.18.mdwn b/doc/bugs/Volume_monitor_in_GNOME_3.18.mdwn
deleted file mode 100644
index 4013f1b40..000000000
--- a/doc/bugs/Volume_monitor_in_GNOME_3.18.mdwn
+++ /dev/null
@@ -1,182 +0,0 @@
-### Please describe the problem.
-
-The assistant prints _"No known volume monitor available through dbus; falling back to mtab polling"_ on startup. Based on source code, it expects to find `org.gtk.Private.UDisks2VolumeMonitor` on the session bus.
-
-However, gvfs 1.26 (on GNOME 3.18) has renamed the service to `org.gtk.vfs.UDisks2VolumeMonitor` instead, and git-annex doesn't know about that yet.
-
-### What steps will reproduce the problem?
-
-Start the assistant on GNOME 3.18.
-
-### What version of git-annex are you using? On what operating system?
-
-Arch Linux:
-git-annex     6.20160114-8
-gvfs          1.26.2-1
-
-### Please provide any additional information below.
-
-The signals seem to have the same format:
-
-[[!format text """
-signal time=1453449272.593009 sender=:1.25 -> destination=(null destination) serial=2270 path=/org/gtk/Private/RemoteVolumeMonitor; interface=org.gtk.Private.RemoteVolumeMonitor; member=MountAdded
-   string "org.gtk.vfs.UDisks2VolumeMonitor"
-   string "0x1981b90"
-   struct {
-      string "0x1981b90"
-      string "A0D8-7268"
-      string ". GThemedIcon drive-harddisk-usb drive-harddisk drive"
-      string ". GThemedIcon drive-harddisk-usb-symbolic drive-harddisk-symbolic drive-symbolic drive-harddisk-usb drive-harddisk drive"
-      string ""
-      string "file:///run/media/grawity/A0D8-7268"
-      boolean true
-      string "0x7f396402a400"
-      array [
-      ]
-      string "gvfs.time_detected_usec.1453449272586665"
-      array [
-      ]
-   }
-"""]]
-
-The DBus interface looks like this:
-
-[[!format text """
-$ gdbus introspect -e -d org.gtk.vfs.UDisks2VolumeMonitor -o / -r
-node /org/gtk/Private/RemoteVolumeMonitor {
-  interface org.freedesktop.DBus.Properties {
-    methods:
-      Get(in  s interface_name,
-          in  s property_name,
-          out v value);
-      GetAll(in  s interface_name,
-             out a{sv} properties);
-      Set(in  s interface_name,
-          in  s property_name,
-          in  v value);
-    signals:
-      PropertiesChanged(s interface_name,
-                        a{sv} changed_properties,
-                        as invalidated_properties);
-    properties:
-  };
-  interface org.freedesktop.DBus.Introspectable {
-    methods:
-      Introspect(out s xml_data);
-    signals:
-    properties:
-  };
-  interface org.freedesktop.DBus.Peer {
-    methods:
-      Ping();
-      GetMachineId(out s machine_uuid);
-    signals:
-    properties:
-  };
-  interface org.gtk.Private.RemoteVolumeMonitor {
-    methods:
-      IsSupported(out b is_supported);
-      List(out a(ssssbbbbbbbbuasa{ss}sa{sv}) drives,
-           out a(ssssssbbssa{ss}sa{sv}) volumes,
-           out a(ssssssbsassa{sv}) mounts);
-      CancelOperation(in  s cancellation_id,
-                      out b was_cancelled);
-      MountUnmount(in  s id,
-                   in  s cancellation_id,
-                   in  u unmount_flags,
-                   in  s mount_op_id);
-      VolumeMount(in  s id,
-                  in  s cancellation_id,
-                  in  u mount_flags,
-                  in  s mount_op_id);
-      DriveEject(in  s id,
-                 in  s cancellation_id,
-                 in  u unmount_flags,
-                 in  s mount_op_id);
-      DrivePollForMedia(in  s id,
-                        in  s cancellation_id);
-      DriveStart(in  s id,
-                 in  s cancellation_id,
-                 in  u flags,
-                 in  s mount_op_id);
-      DriveStop(in  s id,
-                in  s cancellation_id,
-                in  u unmount_flags,
-                in  s mount_op_id);
-      MountOpReply(in  s mount_op_id,
-                   in  i result,
-                   in  s user_name,
-                   in  s domain,
-                   in  s encoded_password,
-                   in  i password_save,
-                   in  i choice,
-                   in  b anonymous);
-    signals:
-      DriveChanged(s dbus_name,
-                   s id,
-                   (ssssbbbbbbbbuasa{ss}sa{sv}) drive);
-      DriveConnected(s dbus_name,
-                     s id,
-                     (ssssbbbbbbbbuasa{ss}sa{sv}) drive);
-      DriveDisconnected(s dbus_name,
-                        s id,
-                        (ssssbbbbbbbbuasa{ss}sa{sv}) drive);
-      DriveEjectButton(s dbus_name,
-                       s id,
-                       (ssssbbbbbbbbuasa{ss}sa{sv}) drive);
-      DriveStopButton(s dbus_name,
-                      s id,
-                      (ssssbbbbbbbbuasa{ss}sa{sv}) drive);
-      VolumeChanged(s dbus_name,
-                    s id,
-                    (ssssssbbssa{ss}sa{sv}) volume);
-      VolumeAdded(s dbus_name,
-                  s id,
-                  (ssssssbbssa{ss}sa{sv}) volume);
-      VolumeRemoved(s dbus_name,
-                    s id,
-                    (ssssssbbssa{ss}sa{sv}) volume);
-      MountChanged(s dbus_name,
-                   s id,
-                   (ssssssbsassa{sv}) mount);
-      MountAdded(s dbus_name,
-                 s id,
-                 (ssssssbsassa{sv}) mount);
-      MountPreUnmount(s dbus_name,
-                      s id,
-                      (ssssssbsassa{sv}) mount);
-      MountRemoved(s dbus_name,
-                   s id,
-                   (ssssssbsassa{sv}) mount);
-      MountOpAskPassword(s dbus_name,
-                         s id,
-                         s message_to_show,
-                         s default_user,
-                         s default_domain,
-                         u flags);
-      MountOpAskQuestion(s dbus_name,
-                         s id,
-                         s message_to_show,
-                         as choices);
-      MountOpShowProcesses(s dbus_name,
-                           s id,
-                           s message_to_show,
-                           ai pid,
-                           as choices);
-      MountOpShowUnmountProgress(s dbus_name,
-                                 s id,
-                                 s message_to_show,
-                                 x time_left,
-                                 x bytes_left);
-      MountOpAborted(s dbus_name,
-                     s id);
-    properties:
-  };
-};
-"""]]
-
-### Have you had any luck using git-annex before? (Sometimes we get tired of reading bug reports all day and a lil' positive end note does wonders)
-
-Works fine in general.
-
-> [[fixed|done]] --[[Joey]]