diff options
author | Joey Hess <joey@kitenet.net> | 2012-10-02 17:34:22 -0400 |
---|---|---|
committer | Joey Hess <joey@kitenet.net> | 2012-10-02 17:41:23 -0400 |
commit | 8a12d8b5406aa99062470980510f6ea48a731d49 (patch) | |
tree | f827367a93f0cec6f89a7c98938f5916de2111ab /Assistant/Threads/Watcher.hs | |
parent | ab39433a9523f9f8a9f8c561a46b38863c0f541d (diff) |
always check with ls-files before adding new files
Makes it safe to use git annex unlock with the watcher/assistant.
And also to mix use of the watcher/assistant with regular files stored in git.
Long ago, I had avoided doing this check, except during the startup scan,
because it would be slow to run ls-files repeatedly.
But then I added the lsof check, and to make that fast, got it to detect
batch file adds. So let's move the ls-files check to also occur when it'll
have a batch, and can check them all with one call.
This does slow down adding a single file by just a bit, but really only
a little bit. (The lsof check is probably more expensive.) It also
speeds up the startup scan, especially when there are lots of new files
found by the scan.
Also, fixed the sleep for annex.delayadd to not run while the threadstate
lock is held, so it doesn't unnecessarily freeze everything else.
Also, --force no longer makes it skip the lsof check, which was not
documented, and seems never a good idea.
Diffstat (limited to 'Assistant/Threads/Watcher.hs')
-rw-r--r-- | Assistant/Threads/Watcher.hs | 85 |
1 files changed, 18 insertions, 67 deletions
diff --git a/Assistant/Threads/Watcher.hs b/Assistant/Threads/Watcher.hs index 9c3f4a941..1bf9e8581 100644 --- a/Assistant/Threads/Watcher.hs +++ b/Assistant/Threads/Watcher.hs @@ -5,8 +5,6 @@ - Licensed under the GNU GPL version 3 or higher. -} -{-# LANGUAGE CPP #-} - module Assistant.Threads.Watcher ( watchThread, checkCanWatch, @@ -30,14 +28,10 @@ import qualified Annex.Queue import qualified Git.Command import qualified Git.UpdateIndex import qualified Git.HashObject -import qualified Git.LsFiles import qualified Backend -import qualified Command.Add import Annex.Content import Annex.CatFile import Git.Types -import Config -import Utility.ThreadScheduler import Data.Bits.Utils import qualified Data.ByteString.Lazy as L @@ -60,32 +54,19 @@ needLsof = error $ unlines , "Be warned: This can corrupt data in the annex, and make fsck complain." ] -{- OSX needs a short delay after a file is added before locking it down, - - as pasting a file seems to try to set file permissions or otherwise - - access the file after closing it. -} -delayaddDefault :: Maybe Seconds -#ifdef darwin_HOST_OS -delayaddDefault = Just $ Seconds 1 -#else -delayaddDefault = Nothing -#endif - watchThread :: ThreadState -> DaemonStatusHandle -> TransferQueue -> ChangeChan -> NamedThread watchThread st dstatus transferqueue changechan = NamedThread thisThread $ do - delayadd <- runThreadState st $ - maybe delayaddDefault (Just . Seconds) . readish - <$> getConfig (annexConfig "delayadd") "" - void $ watchDir "." ignored (hooks delayadd) startup + void $ watchDir "." ignored hooks startup debug thisThread [ "watching", "."] where startup = startupScan st dstatus - hook delay a = Just $ runHandler thisThread delay st dstatus transferqueue changechan a - hooks delayadd = mkWatchHooks - { addHook = hook delayadd onAdd - , delHook = hook Nothing onDel - , addSymlinkHook = hook Nothing onAddSymlink - , delDirHook = hook Nothing onDelDir - , errHook = hook Nothing onErr + hook a = Just $ runHandler thisThread st dstatus transferqueue changechan a + hooks = mkWatchHooks + { addHook = hook onAdd + , delHook = hook onDel + , addSymlinkHook = hook onAddSymlink + , delDirHook = hook onDelDir + , errHook = hook onErr } {- Initial scartup scan. The action should return once the scan is complete. -} @@ -113,65 +94,35 @@ ignored = ig . takeFileName ig ".gitattributes" = True ig _ = False -type Handler = ThreadName -> Maybe Seconds -> FilePath -> Maybe FileStatus -> DaemonStatusHandle -> TransferQueue -> Annex (Maybe Change) +type Handler = ThreadName -> FilePath -> Maybe FileStatus -> DaemonStatusHandle -> TransferQueue -> Annex (Maybe Change) {- Runs an action handler, inside the Annex monad, and if there was a - change, adds it to the ChangeChan. - - Exceptions are ignored, otherwise a whole watcher thread could be crashed. -} -runHandler :: ThreadName -> Maybe Seconds -> ThreadState -> DaemonStatusHandle -> TransferQueue -> ChangeChan -> Handler -> FilePath -> Maybe FileStatus -> IO () -runHandler threadname delay st dstatus transferqueue changechan handler file filestatus = void $ do +runHandler :: ThreadName -> ThreadState -> DaemonStatusHandle -> TransferQueue -> ChangeChan -> Handler -> FilePath -> Maybe FileStatus -> IO () +runHandler threadname st dstatus transferqueue changechan handler file filestatus = void $ do r <- tryIO go case r of Left e -> print e Right Nothing -> noop Right (Just change) -> recordChange changechan change where - go = runThreadState st $ handler threadname delay file filestatus dstatus transferqueue + go = runThreadState st $ handler threadname file filestatus dstatus transferqueue -{- During initial directory scan, this will be run for any regular files - - that are already checked into git. We don't want to turn those into - - symlinks, so do a check. This is rather expensive, but only happens - - during startup. - - - - It's possible for the file to still be open for write by some process. - - This can happen in a few ways; one is if two processes had the file open - - and only one has just closed it. We want to avoid adding a file to the - - annex that is open for write, to avoid anything being able to change it. - - - - We could run lsof on the file here to check for other writers. - - But, that's slow, and even if there is currently a writer, we will want - - to add the file *eventually*. Instead, the file is locked down as a hard - - link in a temp directory, with its write bits disabled, for later - - checking with lsof, and a Change is returned containing a KeySource - - using that hard link. The committer handles running lsof and finishing - - the add. - -} onAdd :: Handler -onAdd threadname delay file filestatus dstatus _ - | maybe False isRegularFile filestatus = - ifM (scanComplete <$> liftIO (getDaemonStatus dstatus)) - ( go - , ifM (null <$> inRepo (Git.LsFiles.notInRepo False [file])) - ( noChange - , go - ) - ) +onAdd _ file filestatus _ _ + | maybe False isRegularFile filestatus = pendingAddChange file | otherwise = noChange where - go = do - liftIO $ do - debug threadname ["file added", file] - maybe noop threadDelaySeconds delay - pendingAddChange =<< Command.Add.lockDown file {- A symlink might be an arbitrary symlink, which is just added. - Or, if it is a git-annex symlink, ensure it points to the content - before adding it. -} onAddSymlink :: Handler -onAddSymlink threadname _ file filestatus dstatus transferqueue = go =<< Backend.lookupFile file +onAddSymlink threadname file filestatus dstatus transferqueue = go =<< Backend.lookupFile file where go (Just (key, _)) = do link <- calcGitLink file key @@ -232,7 +183,7 @@ onAddSymlink threadname _ file filestatus dstatus transferqueue = go =<< Backend | otherwise = noop onDel :: Handler -onDel threadname _ file _ _dstatus _ = do +onDel threadname file _ _dstatus _ = do liftIO $ debug threadname ["file deleted", file] Annex.Queue.addUpdateIndex =<< inRepo (Git.UpdateIndex.unstageFile file) @@ -246,7 +197,7 @@ onDel threadname _ file _ _dstatus _ = do - command to get the recursive list of files in the directory, so rm is - just as good. -} onDelDir :: Handler -onDelDir threadname _ dir _ _dstatus _ = do +onDelDir threadname dir _ _dstatus _ = do liftIO $ debug threadname ["directory deleted", dir] Annex.Queue.addCommand "rm" [Params "--quiet -r --cached --ignore-unmatch --"] [dir] @@ -254,7 +205,7 @@ onDelDir threadname _ dir _ _dstatus _ = do {- Called when there's an error with inotify or kqueue. -} onErr :: Handler -onErr _ _ msg _ dstatus _ = do +onErr _ msg _ dstatus _ = do warning msg void $ liftIO $ addAlert dstatus $ warningAlert "watcher" msg return Nothing |