pass associatedfile and remoteuuid to git-annex-shell

This *almost* works.

Along the way, I noticed that the --uuid parameter was being accidentially
passed after the --, so that has never been actually used by
git-annex-shell to verify it's running in the expected repository. Oops. Fixed.

4 files changed, 38 insertions, 23 deletions

diff --git a/Command/Map.hs b/Command/Map.hs
index 86e9609a7..65e28945f 100644
--- a/Command/Map.hs
+++ b/Command/Map.hs
@@ -203,7 +203,7 @@ tryScan r
 				Git.Config.hRead r
 
 		configlist =
-			onRemote r (pipedconfig, Nothing) "configlist" []
+			onRemote r (pipedconfig, Nothing) "configlist" [] []
 		manualconfiglist = do
 			sshparams <- sshToRepo r [Param sshcmd]
 			liftIO $ pipedconfig "ssh" sshparams
diff --git a/Remote/Git.hs b/Remote/Git.hs
index 0b839c9a5..d80f580fc 100644
--- a/Remote/Git.hs
+++ b/Remote/Git.hs
@@ -31,6 +31,7 @@ import Utility.TempFile
 import Config
 import Init
 import Types.Key
+import qualified Fields
 
 remote :: RemoteType
 remote = RemoteType {
@@ -111,7 +112,7 @@ guardUsable r onerr a
 tryGitConfigRead :: Git.Repo -> Annex Git.Repo
 tryGitConfigRead r 
 	| not $ M.null $ Git.config r = return r -- already read
-	| Git.repoIsSsh r = store $ onRemote r (pipedconfig, r) "configlist" []
+	| Git.repoIsSsh r = store $ onRemote r (pipedconfig, r) "configlist" [] []
 	| Git.repoIsHttp r = do
 		headers <- getHttpHeaders
 		store $ safely $ geturlconfig headers
@@ -171,7 +172,7 @@ inAnnex r key
 						v -> return v
 		checkremote = do
 			showAction $ "checking " ++ Git.repoDescribe r
-			onRemote r (check, unknown) "inannex" [Param (show key)]
+			onRemote r (check, unknown) "inannex" [Param (show key)] []
 			where
 				check c p = dispatch <$> safeSystem c p
 				dispatch ExitSuccess = Right True
@@ -218,6 +219,7 @@ dropKey r key
 		[ Params "--quiet --force"
 		, Param $ show key
 		]
+		[]
 
 {- Tries to copy a key's content from a remote's annex to a file. -}
 copyFromRemote :: Git.Repo -> Key -> AssociatedFile -> FilePath -> Annex Bool
@@ -231,7 +233,7 @@ copyFromRemote r key file dest
 			loc <- inRepo $ gitAnnexLocation key
 			upload u key file $
 				rsyncOrCopyFile params loc dest
-	| Git.repoIsSsh r = rsyncHelper =<< rsyncParamsRemote r True key dest
+	| Git.repoIsSsh r = rsyncHelper =<< rsyncParamsRemote r True key dest file
 	| Git.repoIsHttp r = Annex.Content.downloadUrl (keyUrls r key) dest
 	| otherwise = error "copying from non-ssh, non-http repo not supported"
 
@@ -263,7 +265,7 @@ copyToRemote r key file
 						(rsyncOrCopyFile params keysrc)
 	| Git.repoIsSsh r = commitOnCleanup r $ do
 		keysrc <- inRepo $ gitAnnexLocation key
-		rsyncHelper =<< rsyncParamsRemote r False key keysrc
+		rsyncHelper =<< rsyncParamsRemote r False key keysrc file
 	| otherwise = error "copying to non-ssh repo not supported"
 
 rsyncHelper :: [CommandParam] -> Annex Bool
@@ -290,23 +292,26 @@ rsyncOrCopyFile rsyncparams src dest =
 
 {- Generates rsync parameters that ssh to the remote and asks it
  - to either receive or send the key's content. -}
-rsyncParamsRemote :: Git.Repo -> Bool -> Key -> FilePath -> Annex [CommandParam]
-rsyncParamsRemote r sending key file = do
+rsyncParamsRemote :: Git.Repo -> Bool -> Key -> FilePath -> AssociatedFile -> Annex [CommandParam]
+rsyncParamsRemote r sending key file afile = do
+	u <- getUUID
+	let fields = (Fields.remoteUUID, fromUUID u)
+		: maybe [] (\f -> [(Fields.associatedFile, f)]) afile
 	Just (shellcmd, shellparams) <- git_annex_shell r
 		(if sending then "sendkey" else "recvkey")
-		[ Param $ show key
-		-- Command is terminated with "--", because
-		-- rsync will tack on its own options afterwards,
-		-- and they need to be ignored.
-		, Param "--"
-		]
+		[ Param $ show key ]
+		fields
 	-- Convert the ssh command into rsync command line.
 	let eparam = rsyncShell (Param shellcmd:shellparams)
 	o <- rsyncParams r
 	if sending
-		then return $ o ++ eparam ++ [dummy, File file]
-		else return $ o ++ eparam ++ [File file, dummy]
+		then return $ o ++ rsyncopts eparam dummy (File file)
+		else return $ o ++ rsyncopts eparam (File file) dummy
 	where
+		rsyncopts ps source dest
+			| end ps == [dashdash] = ps ++ [source, dest]
+			| otherwise = ps ++ [dashdash, source, dest]
+		dashdash = Param "--"
 		-- The rsync shell parameter controls where rsync
 		-- goes, so the source/dest parameter can be a dummy value,
 		-- that just enables remote rsync mode.
@@ -333,7 +338,7 @@ commitOnCleanup r a = go `after` a
 					Annex.Branch.commit "update"
 			| otherwise = void $ do
 				Just (shellcmd, shellparams) <-
-					git_annex_shell r "commit" []
+					git_annex_shell r "commit" [] []
 				-- Throw away stderr, since the remote may not
 				-- have a new enough git-annex shell to
 				-- support committing.
diff --git a/Remote/Helper/Ssh.hs b/Remote/Helper/Ssh.hs
index f6742b89f..4434bc65d 100644
--- a/Remote/Helper/Ssh.hs
+++ b/Remote/Helper/Ssh.hs
@@ -1,6 +1,6 @@
 {- git-annex remote access with ssh
  -
- - Copyright 2011 Joey Hess <joey@kitenet.net>
+ - Copyright 2011.2012 Joey Hess <joey@kitenet.net>
  -
  - Licensed under the GNU GPL version 3 or higher.
  -}
@@ -13,6 +13,7 @@ import qualified Git.Url
 import Config
 import Annex.UUID
 import Annex.Ssh
+import Fields
 
 {- Generates parameters to ssh to a repository's host and run a command.
  - Caller is responsible for doing any neccessary shellEscaping of the
@@ -25,9 +26,9 @@ sshToRepo repo sshcmd = do
 
 {- Generates parameters to run a git-annex-shell command on a remote
  - repository. -}
-git_annex_shell :: Git.Repo -> String -> [CommandParam] -> Annex (Maybe (FilePath, [CommandParam]))
-git_annex_shell r command params
-	| not $ Git.repoIsUrl r = return $ Just (shellcmd, shellopts)
+git_annex_shell :: Git.Repo -> String -> [CommandParam] -> [(Field, String)] -> Annex (Maybe (FilePath, [CommandParam]))
+git_annex_shell r command params fields
+	| not $ Git.repoIsUrl r = return $ Just (shellcmd, shellopts ++ fieldopts)
 	| Git.repoIsSsh r = do
 		uuid <- getRepoUUID r
 		sshparams <- sshToRepo r [Param $ sshcmd uuid ]
@@ -39,9 +40,16 @@ git_annex_shell r command params
 		shellopts = Param command : File dir : params
 		sshcmd uuid = unwords $
 			shellcmd : map shellEscape (toCommand shellopts) ++
-			uuidcheck uuid
+			uuidcheck uuid ++
+			map shellEscape (toCommand fieldopts)
 		uuidcheck NoUUID = []
 		uuidcheck (UUID u) = ["--uuid", u]
+		fieldopts
+			| null fields = []
+			| otherwise = fieldsep : map fieldopt fields ++ [fieldsep]
+		fieldsep = Param "--"
+		fieldopt (field, value) = Param $
+			fieldName field ++ "=" ++ value
 
 {- Uses a supplied function (such as boolSystem) to run a git-annex-shell
  - command on a remote.
@@ -53,9 +61,10 @@ onRemote
 	-> (FilePath -> [CommandParam] -> IO a, a)
 	-> String
 	-> [CommandParam]
+	-> [(Field, String)]
 	-> Annex a
-onRemote r (with, errorval) command params = do
-	s <- git_annex_shell r command params
+onRemote r (with, errorval) command params fields = do
+	s <- git_annex_shell r command params fields
 	case s of
 		Just (c, ps) -> liftIO $ with c ps
 		Nothing -> return errorval
diff --git a/debian/changelog b/debian/changelog
index c279614ca..33c850861 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -3,6 +3,7 @@ git-annex (3.20120630) UNRELEASED; urgency=low
   * get, move, copy: Now refuse to do anything when the requested file
     transfer is already in progress by another process.
   * status: Lists transfers that are currently in progress.
+  * Fix passing --uuid to git-annex-shell.
 
  -- Joey Hess <joeyh@debian.org>  Sun, 01 Jul 2012 15:04:37 -0400