1 files changed, 227 insertions, 0 deletions
diff --git a/absl/base/internal/spinlock.h b/absl/base/internal/spinlock.h
new file mode 100644
index 0000000..fa64ba6
--- /dev/null
+++ b/absl/base/internal/spinlock.h
@@ -0,0 +1,227 @@
+//
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+//  Most users requiring mutual exclusion should use Mutex.
+//  SpinLock is provided for use in three situations:
+//   - for use in code that Mutex itself depends on
+//   - to get a faster fast-path release under low contention (without an
+//     atomic read-modify-write) In return, SpinLock has worse behaviour under
+//     contention, which is why Mutex is preferred in most situations.
+//   - for async signal safety (see below)
+
+// SpinLock is async signal safe.  If a spinlock is used within a signal
+// handler, all code that acquires the lock must ensure that the signal cannot
+// arrive while they are holding the lock.  Typically, this is done by blocking
+// the signal.
+
+#ifndef ABSL_BASE_INTERNAL_SPINLOCK_H_
+#define ABSL_BASE_INTERNAL_SPINLOCK_H_
+
+#include <atomic>
+
+#include "absl/base/dynamic_annotations.h"
+#include "absl/base/internal/low_level_scheduling.h"
+#include "absl/base/internal/tsan_mutex_interface.h"
+#include "absl/base/port.h"
+#include "absl/base/thread_annotations.h"
+
+namespace absl {
+namespace base_internal {
+
+class LOCKABLE SpinLock {
+ public:
+  SpinLock() : lockword_(kSpinLockCooperative) {
+    ABSL_TSAN_MUTEX_CREATE(this, 0);
+  }
+
+  // Special constructor for use with static SpinLock objects.  E.g.,
+  //
+  //    static SpinLock lock(base_internal::kLinkerInitialized);
+  //
+  // When intialized using this constructor, we depend on the fact
+  // that the linker has already initialized the memory appropriately.
+  // A SpinLock constructed like this can be freely used from global
+  // initializers without worrying about the order in which global
+  // initializers run.
+  explicit SpinLock(base_internal::LinkerInitialized) {
+    // Does nothing; lockword_ is already initialized
+    ABSL_TSAN_MUTEX_CREATE(this, __tsan_mutex_linker_init);
+  }
+
+  // Constructors that allow non-cooperative spinlocks to be created for use
+  // inside thread schedulers.  Normal clients should not use these.
+  explicit SpinLock(base_internal::SchedulingMode mode);
+  SpinLock(base_internal::LinkerInitialized,
+           base_internal::SchedulingMode mode);
+
+  ~SpinLock() { ABSL_TSAN_MUTEX_DESTROY(this, 0); }
+
+  // Acquire this SpinLock.
+  inline void Lock() EXCLUSIVE_LOCK_FUNCTION() {
+    ABSL_TSAN_MUTEX_PRE_LOCK(this, 0);
+    if (!TryLockImpl()) {
+      SlowLock();
+    }
+    ABSL_TSAN_MUTEX_POST_LOCK(this, 0, 0);
+  }
+
+  // Try to acquire this SpinLock without blocking and return true if the
+  // acquisition was successful.  If the lock was not acquired, false is
+  // returned.  If this SpinLock is free at the time of the call, TryLock
+  // will return true with high probability.
+  inline bool TryLock() EXCLUSIVE_TRYLOCK_FUNCTION(true) {
+    ABSL_TSAN_MUTEX_PRE_LOCK(this, __tsan_mutex_try_lock);
+    bool res = TryLockImpl();
+    ABSL_TSAN_MUTEX_POST_LOCK(
+        this, __tsan_mutex_try_lock | (res ? 0 : __tsan_mutex_try_lock_failed),
+        0);
+    return res;
+  }
+
+  // Release this SpinLock, which must be held by the calling thread.
+  inline void Unlock() UNLOCK_FUNCTION() {
+    ABSL_TSAN_MUTEX_PRE_UNLOCK(this, 0);
+    uint32_t lock_value = lockword_.load(std::memory_order_relaxed);
+    lockword_.store(lock_value & kSpinLockCooperative,
+                    std::memory_order_release);
+
+    if ((lock_value & kSpinLockDisabledScheduling) != 0) {
+      base_internal::SchedulingGuard::EnableRescheduling(true);
+    }
+    if ((lock_value & kWaitTimeMask) != 0) {
+      // Collect contentionz profile info, and speed the wakeup of any waiter.
+      // The wait_cycles value indicates how long this thread spent waiting
+      // for the lock.
+      SlowUnlock(lock_value);
+    }
+    ABSL_TSAN_MUTEX_POST_UNLOCK(this, 0);
+  }
+
+  // Determine if the lock is held.  When the lock is held by the invoking
+  // thread, true will always be returned. Intended to be used as
+  // CHECK(lock.IsHeld()).
+  inline bool IsHeld() const {
+    return (lockword_.load(std::memory_order_relaxed) & kSpinLockHeld) != 0;
+  }
+
+ protected:
+  // These should not be exported except for testing.
+
+  // Store number of cycles between wait_start_time and wait_end_time in a
+  // lock value.
+  static uint32_t EncodeWaitCycles(int64_t wait_start_time,
+                                   int64_t wait_end_time);
+
+  // Extract number of wait cycles in a lock value.
+  static uint64_t DecodeWaitCycles(uint32_t lock_value);
+
+  // Provide access to protected method above.  Use for testing only.
+  friend struct SpinLockTest;
+
+ private:
+  // lockword_ is used to store the following:
+  //
+  // bit[0] encodes whether a lock is being held.
+  // bit[1] encodes whether a lock uses cooperative scheduling.
+  // bit[2] encodes whether a lock disables scheduling.
+  // bit[3:31] encodes time a lock spent on waiting as a 29-bit unsigned int.
+  enum { kSpinLockHeld = 1 };
+  enum { kSpinLockCooperative = 2 };
+  enum { kSpinLockDisabledScheduling = 4 };
+  enum { kSpinLockSleeper = 8 };
+  enum { kWaitTimeMask =                      // Includes kSpinLockSleeper.
+    ~(kSpinLockHeld | kSpinLockCooperative | kSpinLockDisabledScheduling) };
+
+  uint32_t TryLockInternal(uint32_t lock_value, uint32_t wait_cycles);
+  void InitLinkerInitializedAndCooperative();
+  void SlowLock() ABSL_ATTRIBUTE_COLD;
+  void SlowUnlock(uint32_t lock_value) ABSL_ATTRIBUTE_COLD;
+  uint32_t SpinLoop(int64_t initial_wait_timestamp, uint32_t* wait_cycles);
+
+  inline bool TryLockImpl() {
+    uint32_t lock_value = lockword_.load(std::memory_order_relaxed);
+    return (TryLockInternal(lock_value, 0) & kSpinLockHeld) == 0;
+  }
+
+  std::atomic<uint32_t> lockword_;
+
+  SpinLock(const SpinLock&) = delete;
+  SpinLock& operator=(const SpinLock&) = delete;
+};
+
+// Corresponding locker object that arranges to acquire a spinlock for
+// the duration of a C++ scope.
+class SCOPED_LOCKABLE SpinLockHolder {
+ public:
+  inline explicit SpinLockHolder(SpinLock* l) EXCLUSIVE_LOCK_FUNCTION(l)
+      : lock_(l) {
+    l->Lock();
+  }
+  inline ~SpinLockHolder() UNLOCK_FUNCTION() { lock_->Unlock(); }
+
+  SpinLockHolder(const SpinLockHolder&) = delete;
+  SpinLockHolder& operator=(const SpinLockHolder&) = delete;
+
+ private:
+  SpinLock* lock_;
+};
+
+// Register a hook for profiling support.
+//
+// The function pointer registered here will be called whenever a spinlock is
+// contended.  The callback is given an opaque handle to the contended spinlock
+// and the number of wait cycles.  This is thread-safe, but only a single
+// profiler can be registered.  It is an error to call this function multiple
+// times with different arguments.
+void RegisterSpinLockProfiler(void (*fn)(const void* lock,
+                                         int64_t wait_cycles));
+
+//------------------------------------------------------------------------------
+// Public interface ends here.
+//------------------------------------------------------------------------------
+
+// If (result & kSpinLockHeld) == 0, then *this was successfully locked.
+// Otherwise, returns last observed value for lockword_.
+inline uint32_t SpinLock::TryLockInternal(uint32_t lock_value,
+                                          uint32_t wait_cycles) {
+  if ((lock_value & kSpinLockHeld) != 0) {
+    return lock_value;
+  }
+
+  uint32_t sched_disabled_bit = 0;
+  if ((lock_value & kSpinLockCooperative) == 0) {
+    // For non-cooperative locks we must make sure we mark ourselves as
+    // non-reschedulable before we attempt to CompareAndSwap.
+    if (base_internal::SchedulingGuard::DisableRescheduling()) {
+      sched_disabled_bit = kSpinLockDisabledScheduling;
+    }
+  }
+
+  if (lockword_.compare_exchange_strong(
+          lock_value,
+          kSpinLockHeld | lock_value | wait_cycles | sched_disabled_bit,
+          std::memory_order_acquire, std::memory_order_relaxed)) {
+  } else {
+    base_internal::SchedulingGuard::EnableRescheduling(sched_disabled_bit);
+  }
+
+  return lock_value;
+}
+
+}  // namespace base_internal
+}  // namespace absl
+
+#endif  // ABSL_BASE_INTERNAL_SPINLOCK_H_