SkIRect Reference === # IRect ## Overview ## Overview Subtopic | name | description | | --- | --- | | Constructor | functions that construct SkIRect | | Member Function | static functions and member methods | | Member | member values | | Operator | operator overloading methods | | Related Function | similar methods grouped together | # Struct SkIRect SkIRect holds four 32 bit integer coordinates describing the upper and lower bounds of a rectangle. SkIRect may be created from outer bounds or from position, width, and height. SkIRect describes an area; if its right is less than or equal to its left, or if its bottom is less than or equal to its top, it is considered empty. ## Related Function | name | description | | --- | --- | | Inset Outset Offset | moves sides | | Intersection | set to shared bounds | | Join | set to union of bounds | | Property | member values, center, validity | | Set | replaces all values | | Sorting | orders sides | ## Member Function | name | description | | --- | --- | | EmptyIRect | returns immutable bounds of (0, 0, 0, 0) | | Intersects | returns true if areas overlap | | IntersectsNoEmptyCheck | returns true if areas overlap skips empty check | | MakeEmpty | returns bounds of (0, 0, 0, 0) | | MakeLTRB | constructs from int left, top, right, bottom | | MakeSize | constructs from ISize returning (0, 0, width, height) | | MakeWH | constructs from int input returning (0, 0, width, height) | | MakeXYWH | constructs from int input returning (x, y, width, height) | | bottom | returns larger bounds in y, if sorted | | centerX | returns midpoint in x | | centerY | returns midpoint in y | | contains | returns true if IPoint (x, y) is equal or inside | | containsNoEmptyCheck | returns true if contains unsorted IRect | | height | returns span in y | | height64 | returns span in y as int64_t | | inset | moves the sides symmetrically about the center | | intersect | sets to shared area; returns true if not empty | | intersectNoEmptyCheck | sets to shared area; returns true if not empty skips empty check | | is16Bit | returns true if members fit in 16-bit word | | isEmpty | returns true if width or height are zero or negative or they exceed int32_t | | isEmpty64 | returns true if width or height are zero or negative | | join | sets to union of bounds | | left | returns smaller bounds in x, if sorted | | makeInset | constructs from sides moved symmetrically about the center | | makeOffset | constructs from translated sides | | makeOutset | constructs from sides moved symmetrically about the center | | makeSorted | constructs, ordering sides from smaller to larger | | offset | translates sides without changing width and height | | offsetTo | translates to (x, y) without changing width and height | | outset | moves the sides symmetrically about the center | | quickReject | returns true if rectangles do not intersect | | right | returns larger bounds in x, if sorted | | set | sets to (left, top, right, bottom) | | setEmpty | sets to (0, 0, 0, 0) | | setLTRB | sets to SkScalar input (left, top, right, bottom) | | setXYWH | sets to (x, y, width, height) | | size | returns ISize (width, height) | | sort | orders sides from smaller to larger | | top | returns smaller bounds in y, if sorted | | width | returns span in x | | width64 | returns span in y as int64_t | | x | returns bounds left | | y | returns bounds top | ## Member | name | description | | --- | --- | | fBottom | larger y-axis bounds | | fLeft | smaller x-axis bounds | | fRight | larger x-axis bounds | | fTop | smaller y-axis bounds | int32_t fLeft May contain any value. The smaller of the horizontal values when sorted. When equal to or greater than fRight, IRect is empty. int32_t fTop May contain any value. The smaller of the horizontal values when sorted. When equal to or greater than fBottom, IRect is empty. int32_t fRight May contain any value. The larger of the vertical values when sorted. When equal to or less than fLeft, IRect is empty. int32_t fBottom May contain any value. The larger of the vertical values when sorted. When equal to or less than fTop, IRect is empty. ## Constructor | name | description | | --- | --- | | EmptyIRect | returns immutable bounds of (0, 0, 0, 0) | | MakeEmpty | returns bounds of (0, 0, 0, 0) | | MakeLTRB | constructs from int left, top, right, bottom | | MakeSize | constructs from ISize returning (0, 0, width, height) | | MakeWH | constructs from int input returning (0, 0, width, height) | | MakeXYWH | constructs from int input returning (x, y, width, height) | | makeInset | constructs from sides moved symmetrically about the center | | makeOffset | constructs from translated sides | | makeOutset | constructs from sides moved symmetrically about the center | | makeSorted | constructs, ordering sides from smaller to larger | ## MakeEmpty

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeEmpty()

Returns constructed IRect set to (0, 0, 0, 0). Many other rectangles are empty; if left is equal to or greater than right, or if top is equal to or greater than bottom. Setting all members to zero is a convenience, but does not designate a special empty rectangle. ### Return Value bounds (0, 0, 0, 0) ### Example

#### Example Output ~~~~ MakeEmpty isEmpty: true offset rect isEmpty: true inset rect isEmpty: true outset rect isEmpty: false ~~~~

### See Also EmptyIRect isEmpty setEmpty SkRect::MakeEmpty --- ## MakeWH

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeWH(int32_t w, int32_t h)

Returns constructed IRect set to (0, 0, w, h). Does not validate input; w or h may be negative. ### Parameters

`w`	width of constructed IRect
`h`	height of constructed IRect

### Return Value bounds (0, 0, w, h) ### Example

#### Example Output ~~~~ all equal ~~~~

### See Also MakeSize MakeXYWH SkRect::MakeWH SkRect::MakeIWH --- ## MakeSize

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeSize(const SkISize& size)

Returns constructed IRect set to (0, 0, size.width, size.height). Does not validate input; size.width or size.height may be negative. ### Parameters

size values for IRect width and height

### Return Value bounds (0, 0, size.width, size.height) ### Example

#### Example Output ~~~~ round width: 26 height: 36 floor width: 25 height: 35 ~~~~

### See Also MakeWH MakeXYWH SkRect::Make^[2] SkRect::MakeIWH --- ## MakeLTRB

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeLTRB(int32_t l, int32_t t, int32_t r, int32_t b)

Returns constructed IRect set to (l, t, r, b). Does not sort input; IRect may result in fLeft greater than fRight, or fTop greater than fBottom. ### Parameters

`l`	integer stored in fLeft
`t`	integer stored in fTop
`r`	integer stored in fRight
`b`	integer stored in fBottom

### Return Value bounds (l, t, r, b) ### Example

#### Example Output ~~~~ rect: 5, 35, 15, 25 isEmpty: true rect: 5, 25, 15, 35 isEmpty: false ~~~~

### See Also MakeXYWH SkRect::MakeLTRB --- ## MakeXYWH

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeXYWH(int32_t x, int32_t y, int32_t w, int32_t h)

Returns constructed IRect set to: (x, y, x + w, y + h). Does not validate input; w or h may be negative. ### Parameters

`x`	stored in fLeft
`y`	stored in fTop
`w`	added to x and stored in fRight
`h`	added to y and stored in fBottom

### Return Value bounds at (x, y) with width w and height h ### Example

#### Example Output ~~~~ rect: 5, 35, -10, 60 isEmpty: true rect: -10, 35, 5, 60 isEmpty: false ~~~~

### See Also MakeLTRB SkRect::MakeXYWH --- ## Property | name | description | | --- | --- | | bottom | returns larger bounds in y, if sorted | | centerX | returns midpoint in x | | centerY | returns midpoint in y | | height | returns span in y | | height64 | returns span in y as int64_t | | is16Bit | returns true if members fit in 16-bit word | | isEmpty | returns true if width or height are zero or negative or they exceed int32_t | | isEmpty64 | returns true if width or height are zero or negative | | left | returns smaller bounds in x, if sorted | | right | returns larger bounds in x, if sorted | | size | returns ISize (width, height) | | top | returns smaller bounds in y, if sorted | | width | returns span in x | | width64 | returns span in y as int64_t | | x | returns bounds left | | y | returns bounds top | ## left

int32_t left() const

Returns left edge of IRect, if sorted. Call sort to reverse fLeft and fRight if needed. ### Return Value fLeft ### Example

#### Example Output ~~~~ unsorted.fLeft: 15 unsorted.left(): 15 sorted.fLeft: 10 sorted.left(): 10 ~~~~

### See Also fLeft x SkRect::left() --- ## top

int32_t top() const

Returns top edge of IRect, if sorted. Call isEmpty to see if IRect may be invalid, and sort to reverse fTop and fBottom if needed. ### Return Value fTop ### Example

#### Example Output ~~~~ unsorted.fTop: 25 unsorted.top(): 25 sorted.fTop: 5 sorted.top(): 5 ~~~~

### See Also fTop y SkRect::top() --- ## right

int32_t right() const

Returns right edge of IRect, if sorted. Call sort to reverse fLeft and fRight if needed. ### Return Value fRight ### Example

#### Example Output ~~~~ unsorted.fRight: 10 unsorted.right(): 10 sorted.fRight: 15 sorted.right(): 15 ~~~~

### See Also fRight SkRect::right() --- ## bottom

int32_t bottom() const

Returns bottom edge of IRect, if sorted. Call isEmpty to see if IRect may be invalid, and sort to reverse fTop and fBottom if needed. ### Return Value fBottom ### Example

#### Example Output ~~~~ unsorted.fBottom: 5 unsorted.bottom(): 5 sorted.fBottom: 25 sorted.bottom(): 25 ~~~~

### See Also fBottom SkRect::bottom() --- ## x

int32_t x() const

Returns left edge of IRect, if sorted. Call isEmpty to see if IRect may be invalid, and sort to reverse fLeft and fRight if needed. ### Return Value fLeft ### Example

#### Example Output ~~~~ unsorted.fLeft: 15 unsorted.x(): 15 sorted.fLeft: 10 sorted.x(): 10 ~~~~

### See Also fLeft left y SkRect::x() --- ## y

int32_t y() const

Returns top edge of IRect, if sorted. Call isEmpty to see if IRect may be invalid, and sort to reverse fTop and fBottom if needed. ### Return Value fTop ### Example

#### Example Output ~~~~ unsorted.fTop: 25 unsorted.y(): 25 sorted.fTop: 5 sorted.y(): 5 ~~~~

### See Also fTop top x SkRect::y() --- ## width

int32_t width() const

Returns span on the x-axis. This does not check if IRect is sorted, or if result fits in 32-bit signed integer; result may be negative. ### Return Value fRight minus fLeft ### Example

#### Example Output ~~~~ unsorted width: -5 large width: -5 ~~~~

### See Also height width64 height64 SkRect::width() --- ## width64

int64_t width64() const

Returns span on the x-axis. This does not check if IRect is sorted, so the result may be negative. This is safer than calling width since width might overflow in its calculation. ### Return Value fRight minus fLeft cast to int64_t SkIRect large = { -2147483647, 1, 2147483644, 2 }; #### Example Output ~~~~ width: -5 width64: 4294967291 ~~~~ ### See Also width height height64 SkRect::width() --- ## height

int32_t height() const

Returns span on the y-axis. This does not check if IRect is sorted, or if result fits in 32-bit signed integer; result may be negative. ### Return Value fBottom minus fTop ### Example

#### Example Output ~~~~ unsorted height: -5 large height: -5 ~~~~

### See Also width SkRect::height() --- ## height64

int64_t height64() const

Returns span on the y-axis. This does not check if IRect is sorted, so the result may be negative. This is safer than calling height since height might overflow in its calculation. ### Return Value fBottom minus fTop cast to int64_t SkIRect large = { 1, -2147483647, 2, 2147483644 }; #### Example Output ~~~~ height: -5 height64: 4294967291 ~~~~ ### See Also width height width64 SkRect::height() --- ## size

SkISize size() const

Returns spans on the x-axis and y-axis. This does not check if IRect is sorted, or if result fits in 32-bit signed integer; result may be negative. ### Return Value ISize (width, height) ### Example

#### Example Output ~~~~ original rect: 20, 30, 40, 50 size: 20, 20 offset rect: 40, 50, 60, 70 size: 20, 20 outset rect: 20, 30, 80, 90 size: 60, 60 ~~~~

### See Also height width MakeSize --- ## centerX

int32_t centerX() const

Returns average of left edge and right edge. Result does not change if IRect is sorted. Result may be incorrect if IRect is far from the origin. Result is rounded down. ### Return Value midpoint in x ### Example

Dividing by two rounds towards zero. centerX uses a bit shift and rounds down.

#### Example Output ~~~~ left: 20 right: 41 centerX: 30 div2: 30 left: -20 right: -41 centerX: -31 div2: -30 left: -10 right: 11 centerX: 0 div2: 0 ~~~~

### See Also centerY SkRect::centerX --- ## centerY

int32_t centerY() const

Returns average of top edge and bottom edge. Result does not change if IRect is sorted. Result may be incorrect if IRect is far from the origin. Result is rounded down. ### Return Value midpoint in y ### Example

#### Example Output ~~~~ left: 1073741824 right: 1073741826 centerX: -1073741823 safe mid x: 1073741825 ~~~~

### See Also centerX SkRect::centerY --- ## isEmpty

bool isEmpty() const

Returns true if width or height . ### Return Value true if width or height are zero or negative ### Example

#### Example Output ~~~~ rect: {20, 40, 10, 50} is empty sorted: {10, 40, 20, 50} is not empty rect: {20, 40, 20, 50} is empty sorted: {20, 40, 20, 50} is empty ~~~~

### See Also EmptyIRect MakeEmpty sort SkRect::isEmpty --- ## isEmpty64

bool isEmpty64() const

Returns true if fLeft is equal to or greater than fRight, or if fTop is equal to or greater than fBottom. Call sort to reverse rectangles with negative width64 or height64. ### Return Value true if width64 or height64 are zero or negative SkIRect tests[] = {{20, 40, 10, 50}, {20, 40, 20, 50}}; for (auto rect : tests) { #### Example Output ~~~~ rect: {20, 40, 10, 50} is empty sorted: {10, 40, 20, 50} is not empty rect: {20, 40, 20, 50} is empty sorted: {20, 40, 20, 50} is empty ~~~~ ### See Also EmptyIRect MakeEmpty sort SkRect::isEmpty --- ## Operator | name | description | | --- | --- | | operator!=(const SkIRect& a, const SkIRect& b) | returns true if members are unequal | | operator==(const SkIRect& a, const SkIRect& b) | returns true if members are equal | ## operator==

bool operator==(const SkIRect& a, const SkIRect& b)

Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are identical to corresponding members in b. ### Parameters

`a`	IRect to compare
`b`	IRect to compare

### Return Value true if members are equal ### Example

#### Example Output ~~~~ test == sorted ~~~~

### See Also operator!=(const SkIRect& a, const SkIRect& b) --- ## operator!=

bool operator!=(const SkIRect& a, const SkIRect& b)

Returns true if any member in a: fLeft, fTop, fRight, and fBottom; is not identical to the corresponding member in b. ### Parameters

`a`	IRect to compare
`b`	IRect to compare

### Return Value true if members are not equal ### Example

#### Example Output ~~~~ test != sorted ~~~~

### See Also operator==(const SkIRect& a, const SkIRect& b) --- ## is16Bit

bool is16Bit() const

Returns true if all members: fLeft, fTop, fRight, and fBottom; values are equal to or larger than -32768 and equal to or smaller than 32767. ### Return Value true if members fit in 16-bit word ### Example

#### Example Output ~~~~ {-32768, -32768, 32767, 32767} fits in 16 bits {-32768, -32768, 32768, 32768} does not fit in 16 bits ~~~~

### See Also SkTFitsIn --- ## Set | name | description | | --- | --- | | set | sets to (left, top, right, bottom) | | setEmpty | sets to (0, 0, 0, 0) | | setLTRB | sets to SkScalar input (left, top, right, bottom) | | setXYWH | sets to (x, y, width, height) | ## setEmpty

void setEmpty()

Sets IRect to (0, 0, 0, 0). Many other rectangles are empty; if left is equal to or greater than right, or if top is equal to or greater than bottom. Setting all members to zero is a convenience, but does not designate a special empty rectangle. ### Example

#### Example Output ~~~~ rect: {3, 4, 1, 2} is empty rect: {0, 0, 0, 0} is empty ~~~~

### See Also MakeEmpty SkRect::setEmpty --- ## set

void set(int32_t left, int32_t top, int32_t right, int32_t bottom)

Sets IRect to (left, top, right, bottom). left and right are not sorted; left is not necessarily less than right. top and bottom are not sorted; top is not necessarily less than bottom. ### Parameters

`left`	assigned to fLeft
`top`	assigned to fTop
`right`	assigned to fRight
`bottom`	assigned to fBottom

### Example

#### Example Output ~~~~ rect1: {3, 4, 1, 2} rect2: {3, 4, 1, 2} ~~~~

### See Also setLTRB setXYWH SkRect::set^[2]^[3]^[4] --- ## setLTRB

void setLTRB(int32_t left, int32_t top, int32_t right, int32_t bottom)

`left`	stored in fLeft
`top`	stored in fTop
`right`	stored in fRight
`bottom`	stored in fBottom

### Example

#### Example Output ~~~~ rect1: {3, 4, 1, 2} rect2: {3, 4, 1, 2} ~~~~

### See Also set setXYWH SkRect::setLTRB --- ## setXYWH

void setXYWH(int32_t x, int32_t y, int32_t width, int32_t height)

Sets IRect to: (x, y, x + width, y + height). Does not validate input; width or height may be negative. ### Parameters

`x`	stored in fLeft
`y`	stored in fTop
`width`	added to x and stored in fRight
`height`	added to y and stored in fBottom

### Example

#### Example Output ~~~~ rect: 5, 35, -10, 60 isEmpty: true rect: -10, 35, 5, 60 isEmpty: false ~~~~

### See Also MakeXYWH setLTRB set SkRect::setXYWH --- ## Inset Outset Offset | name | description | | --- | --- | | inset | moves the sides symmetrically about the center | | offset | translates sides without changing width and height | | | offset(int32 t dx, int32 t dy) | | offsetTo | translates to (x, y) without changing width and height | | outset | moves the sides symmetrically about the center | ## makeOffset

SkIRect makeOffset(int32_t dx, int32_t dy) const

Returns IRect offset by (dx, dy). If dx is negative, IRect returned is moved to the left. If dx is positive, IRect returned is moved to the right. If dy is negative, IRect returned is moved upward. If dy is positive, IRect returned is moved downward. ### Parameters

`dx`	offset added to fLeft and fRight
`dy`	offset added to fTop and fBottom

### Return Value IRect offset in x or y, with original width and height ### Example

#### Example Output ~~~~ rect: 10, 50, 20, 60 isEmpty: false rect: 25, 82, 35, 92 isEmpty: false ~~~~

### See Also offset^[2] makeInset makeOutset SkRect::makeOffset --- ## makeInset

SkIRect makeInset(int32_t dx, int32_t dy) const

Returns IRect, inset by (dx, dy). If dx is negative, IRect returned is wider. If dx is positive, IRect returned is narrower. If dy is negative, IRect returned is taller. If dy is positive, IRect returned is shorter. ### Parameters

`dx`	offset added to fLeft and subtracted from fRight
`dy`	offset added to fTop and subtracted from fBottom

### Return Value IRect inset symmetrically left and right, top and bottom ### Example

#### Example Output ~~~~ rect: 10, 50, 20, 60 isEmpty: false rect: 25, 82, 5, 28 isEmpty: true ~~~~

### See Also inset makeOffset makeOutset SkRect::makeInset --- ## makeOutset

SkIRect makeOutset(int32_t dx, int32_t dy) const

Returns IRect, outset by (dx, dy). If dx is negative, IRect returned is narrower. If dx is positive, IRect returned is wider. If dy is negative, IRect returned is shorter. If dy is positive, IRect returned is taller. ### Parameters

`dx`	offset subtracted to fLeft and added from fRight
`dy`	offset subtracted to fTop and added from fBottom

### Return Value IRect outset symmetrically left and right, top and bottom ### Example

#### Example Output ~~~~ rect: 10, 50, 20, 60 isEmpty: false rect: -5, 18, 35, 92 isEmpty: false ~~~~

### See Also outset makeOffset makeInset SkRect::makeOutset --- ## offset

void offset(int32_t dx, int32_t dy)

Offsets IRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom. If dx is negative, moves IRect returned to the left. If dx is positive, moves IRect returned to the right. If dy is negative, moves IRect returned upward. If dy is positive, moves IRect returned downward. ### Parameters

`dx`	offset added to fLeft and fRight
`dy`	offset added to fTop and fBottom

### Example

#### Example Output ~~~~ rect: 15, 27, 55, 86 ~~~~

### See Also offsetTo makeOffset SkRect::offset^[2] ---

void offset(const SkIPoint& delta)

Offsets IRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to fTop, fBottom. If delta.fX is negative, moves IRect returned to the left. If delta.fX is positive, moves IRect returned to the right. If delta.fY is negative, moves IRect returned upward. If delta.fY is positive, moves IRect returned downward. ### Parameters

delta offset added to IRect

### Example

#### Example Output ~~~~ rect: 15, 27, 55, 86 ~~~~

### See Also offsetTo makeOffset SkRect::offset^[2] --- ## offsetTo

void offsetTo(int32_t newX, int32_t newY)

Offsets IRect so that fLeft equals newX, and fTop equals newY. width and height are unchanged. ### Parameters

`newX`	stored in fLeft, preserving width
`newY`	stored in fTop, preserving height

### Example

#### Example Output ~~~~ rect: 15, 27, 55, 86 ~~~~

### See Also offset^[2] makeOffset setXYWH SkRect::offsetTo --- ## inset

void inset(int32_t dx, int32_t dy)

Insets IRect by (dx,dy). If dx is positive, makes IRect narrower. If dx is negative, makes IRect wider. If dy is positive, makes IRect shorter. If dy is negative, makes IRect taller. ### Parameters

`dx`	offset added to fLeft and subtracted from fRight
`dy`	offset added to fTop and subtracted from fBottom

### Example

#### Example Output ~~~~ rect: 15, 27, 45, 60 ~~~~

### See Also outset makeInset SkRect::inset --- ## outset

void outset(int32_t dx, int32_t dy)

Outsets IRect by (dx, dy). If dx is positive, makes IRect wider. If dx is negative, makes IRect narrower. If dy is positive, makes IRect taller. If dy is negative, makes IRect shorter. ### Parameters

`dx`	subtracted to fLeft and added from fRight
`dy`	subtracted to fTop and added from fBottom

### Example

#### Example Output ~~~~ rect: 5, 1, 55, 86 ~~~~

### See Also inset makeOutset SkRect::outset --- ## Intersection IRects intersect when they enclose a common area. To intersect, each of the pair must describe area; fLeft is less than fRight, and fTop is less than fBottom; empty() returns false. The intersection of IRect pair can be described by: (max(a.fLeft, b.fLeft), max(a.fTop, b.fTop), min(a.fRight, b.fRight), min(a.fBottom, b.fBottom)). The intersection is only meaningful if the resulting IRect is not empty and describes an area: fLeft is less than fRight, and fTop is less than fBottom. | name | description | | --- | --- | | Intersects | returns true if areas overlap | | IntersectsNoEmptyCheck | returns true if areas overlap skips empty check | | contains | returns true if IPoint (x, y) is equal or inside | | | contains(int32 t x, int32 t y) const | | containsNoEmptyCheck | returns true if contains unsorted IRect | | | containsNoEmptyCheck(int32 t left, int32 t top, int32 t right, int32 t bottom) const | | intersect | sets to shared area; returns true if not empty | | | intersect(const SkIRect& r) | | intersectNoEmptyCheck | sets to shared area; returns true if not empty skips empty check | | quickReject | returns true if rectangles do not intersect | ## quickReject

bool quickReject(int l, int t, int r, int b) const

Constructs IRect (l, t, r, b) and returns true if constructed IRect does not intersect IRect. Does not check to see if construction or IRect is empty. Is implemented with short circuit logic so that true can be returned after a single compare. ### Parameters

`l`	x minimum of constructed IRect
`t`	y minimum of constructed IRect
`r`	x maximum of constructed IRect
`b`	y maximum of constructed IRect

### Return Value true if construction and IRect have no area in common ### Example

quickReject is the complement of Intersects.

#### Example Output ~~~~ rect (7, 11, 13, 17) test(13, 11, 15, 17) quickReject true; intersects false rect (7, 11, 13, 17) test(7, 7, 13, 11) quickReject true; intersects false rect (7, 11, 13, 17) test(12, 16, 14, 18) quickReject false; intersects true ~~~~

### See Also Intersects --- ## contains

bool contains(int32_t x, int32_t y) const

Returns true if: fLeft <= x < fRight && fTop <= y < fBottom. Returns false if IRect is empty. Considers input to describe constructed IRect: (x, y, x + 1, y + 1)and returns true if constructed area is completely enclosed by IRect area. ### Parameters

`x`	test IPoint x-coordinate
`y`	test IPoint y-coordinate

### Return Value true if (x, y) is inside IRect ### Example

#### Example Output ~~~~ rect: (30, 50, 40, 60) contains (30, 50) rect: (30, 50, 40, 60) does not contain (40, 50) rect: (30, 50, 40, 60) does not contain (30, 60) ~~~~

### See Also containsNoEmptyCheck^[2] SkRect::contains^[2]^[3] ---

bool contains(int32_t left, int32_t top, int32_t right, int32_t bottom) const

Constructs IRect to intersect from (left, top, right, bottom). Does not sort construction. Returns true if IRect contains construction. Returns false if IRect is empty or construction is empty. ### Parameters

`left`	x minimum of constructed IRect
`top`	y minimum of constructed IRect
`right`	x maximum of constructed IRect
`bottom`	y maximum of constructed IRect

### Return Value true if all sides of IRect are outside construction ### Example