diff options
Diffstat (limited to 'site')
-rw-r--r-- | site/dev/testing/buildbot.md | 66 | ||||
-rw-r--r-- | site/dev/testing/skialab.md | 217 |
2 files changed, 257 insertions, 26 deletions
diff --git a/site/dev/testing/buildbot.md b/site/dev/testing/buildbot.md index 7d9035db14..2f4a12fb53 100644 --- a/site/dev/testing/buildbot.md +++ b/site/dev/testing/buildbot.md @@ -9,14 +9,23 @@ to run continuous builds and tests. Here is a link to our main status page: https://status.skia.org/ -There are also Skia client, compile, Android, and FYI console pages for a detailed -view of those results: +There are also buildbot console pages for a detailed view of those results: - Externally-facing: http://build.chromium.org/p/client.skia/console - - Internally-facing: http://chromegw.corp.google.com/i/client.skia/console - http://chromegw.corp.google.com/i/client.skia.internal/console - \(only visible internally\) + Externally-facing: + +* http://build.chromium.org/p/client.skia/console +* http://build.chromium.org/p/client.skia.android/console +* http://build.chromium.org/p/client.skia.compile/console +* http://build.chromium.org/p/client.skia.fyi/console + + Internally-facing: + +* http://uberchromegw.corp.google.com/i/client.skia/console +* http://uberchromegw.corp.google.com/i/client.skia.android/console +* http://uberchromegw.corp.google.com/i/client.skia.compile/console +* http://uberchromegw.corp.google.com/i/client.skia.fyi/console +* http://uberchromegw.corp.google.com/i/client.skia.internal/console + Architecture ------------ @@ -25,30 +34,35 @@ The buildbot system consists of these elements: \(see http://buildbot.net/buildbot/docs/current/manual/introduction.html#system-architecture for more detail\) -* builder +* Buildbot Master - * one repeatable build and/or test configuration on a given platform. - * each builder maintains its own local checkout of the Skia repo - * only one builder is running at any given time on any single buildslave; otherwise, - different builders could interfere with each other's performance numbers + * Watches for new commits to land in the Skia repository + \(https://skia.googlesource.com/skia\) + * Whenever a new commit lands, it triggers a **Build** on each **Builder** + to test the new revision. + * Serves up status pages whenever anybody requests them -* buildbot master - - * watches for new commits to land in the Skia repository - \(https://skia.googlesource.com/skia\) - * whenever a new commit lands, it tells buildbot slaves to start building and - testing the latest revision - * serves up status pages whenever anybody requests them +* Build -* buildslave \(or "buildbot slave"\) - - * a process on a machine that builds and runs code as directed by the buildbot - master - * one or more builders run on each buildslave + * One run of a particular **Builder**, at a particular code revision. + * "Build" is sort of a misnomer; it's just a list of steps (typically shell + commands) which are run by the **Buildslave** process on the host + machine, and those may include compiling and running code as well as + arbitrary other commands. -* build +* Builder - * one run of a particular builder, at a particular code revision + * One repeatable build and/or test configuration on a given platform. The + Builder is basically a blueprint which provides logic to determine which + steps to run within a Build. + +* Buildslave \(or "buildbot slave"\) + + * A process running on a host machine that builds and runs code as directed + by the Buildbot Master. + * One or more Builders may run on a given Buildslave, but only one runs at + a time. + * One or more Buildslaves may run on a given host machine. Status View diff --git a/site/dev/testing/skialab.md b/site/dev/testing/skialab.md new file mode 100644 index 0000000000..cdb2449c4f --- /dev/null +++ b/site/dev/testing/skialab.md @@ -0,0 +1,217 @@ +SkiaLab +======= + +Overview +-------- + +Skia's buildbots are hosted in three places: + +* Google Compute Engine. This is the preferred location for bots which don't + need to run on physical hardware, ie. anything that doesn't require a GPU, + stable performance numbers, or a specific hardware configuration. Most of our + compile bots live here, along with some non-GPU test bots on Linux and + Windows. +* Chrome Golo. This is the preferred location for bots which require specific + hardware or OS configurations that are not supported by GCE. We have several + Mac, Linux, and Windows bots in the Golo. +* The local SkiaLab in Chapel Hill. Anything we can't get in GCE or the Golo + lives here. This includes newer or uncommon GPUs and all Android, ChromeOS, + and iOS devices. + +This page covers the local SkiaLab in Chapel Hill. + + +Layout +------ + +The SkiaLab consists of three wireframe racks which hold machines connected to +two KVM switches. Each KVM switch has a monitor, mouse, and keyboard and is the +primary mode of access to the lab machines. In general, the machines are on the +same rack as the KVM switch used to access them. The switch nearest the door +(labeled "DOOR"), is connected to machines on its own rack as well as a smaller +rack closer to the door. + +Each machine is labeled with its hostname and the number or letter used to +access it on the KVM switch. Android devices are located on the rack nearest +the interior of the office (the KVM switch is labeled "OFFICE"). They are +labeled with their serial number and the name of the buildslave they are +associated with. Each device connects to a host machine, either directly or +by way of a powered USB hub. + +**Disclaimer: Please ONLY make changes on a lab machine as a last resort, as it +is disruptive to the running bots and can leave the machines in a dirty state. +If you must make changes, such as cloning a copy of Skia to run tests and debug +failures, be sure to clean up after yourself. If a permanent change needs to be +made on the machine (such as a driver update), please contact an infra team +member.** + + +Common Tasks +------------ + +### Locating the host machine for a failing bot + +Sometimes failures can only be reproduced on a particular hardware +configuration. In these cases, it is sometimes necessary to log into the host +machine where a failing bot is running in order to debug the failure. + +From the [Status](https://status.skia.org/) page: + +1. Click on the box associated with a failed build. +2. A popup will appear with some information about the build, including the + builder and buildslave. Click the "Lookup" link next to "Host machine". This + will bring you to the [SkiaLab Hosts](https://status.skia.org/hosts) page, + which contains information about the machines in the lab, pre-filtered to + select the machine which runs the buildslave in question. +3. The information box will display the hostname of the machine as well as the + KVM switch and number used to access the machine, if the machine is in the + SkiaLab. +4. Walk over to the lab. While standing at the KVM switch indicated by the host + information page, double tab <ctrl> and then press the number or letter from + the information page. It may be necessary to move or click the mouse to wake + the machine up. +5. Log in to the machine if necessary. The password is stored in + [Valentine](https://valentine/). + +### Rebooting a problematic Android device + +Follow the same process as above, with some slight changes: + +1. On the [Status](https://status.skia.org/) page, click the box for the failed + build. +2. Click the "Lookup" link for the host machine. Remember the name of the + buildslave which ran the build. +3. The hosts page will display the information used to access the host machine + for the device as well as the serial number for the device next to the name + of its buildsave. +4. Walk over to the lab and find the Android device with the serial number from + the hosts page. Hold the power and volume-up buttons until the device + reboots. +5. Access the host machine for the device, per the above instructions. Use the + `which_devices.py` script to verify that the device has re-attached. From + the home directory: + + $ python buildbot/scripts/which_devices.py + + +Maintenance Tasks +----------------- + +### Bringing up a new buildbot host machine + +This assumes that we're just adding a host machine for a new buildbot slave, +and doesn't cover how to make changes to the buildbot code to change the +behavior of the builder itself. + +1. Obtain the machine itself and place it on the racks in the lab. Connect + power, ethernet, and KVM cables. +2. If we already have a disk image appropriate for this machine, follow the + instructions for flashing a disk image to a machine below. Otherwise, follow + the instructions for bringing up a new machine from scratch. +3. Set the hostname for the machine. +4. Add the new slave to the slaves.cfg file on the appropriate master, eg. + https://chromium.googlesource.com/chromium/tools/build/+/master/masters/master.client.skia/slaves.cfg, + and upload the change for code review. +5. Add an entry for the new host machine to the slave_hosts_cfg.py file in the + Skia infra repo: https://skia.googlesource.com/buildbot/+/master/site_config/slave_hosts_cfg.py, + and upload it for review. +6. Commit the change to add the slave to the master. Once it lands, commit the + slave_hosts_cfg.py change immediately afterward. +7. Restart the build master. Either ask borenet@ to do this or file a + [ticket](https://code.google.com/p/chromium/issues/entry?template=Build%20Infrastructure&labels=Infra-Labs,Restrict-View-Google,Infra-Troopers&summary=Restart%20request%20for%20[%20name%20]&comment=Please%20provide%20the%20reason%20for%20restart.%0A%0ASet%20to%20Pri-0%20if%20immediate%20restarted%20is%20required,%20otherwise%20please%20set%20to%20Pri-1%20and%20the%20restart%20will%20happen%20when%20the%20trooper%20gets%20a%20free%20moment.) for a trooper to do it. +8. Reboot the machine and monitor the build master to ensure that it connects. + + +### Bringing up a new Android bot + +1. Locate or add a host machine. We generally want to keep the number of + devices attached to each host below 5 or so. If a new host machine is + required, follow the above instructions for bringing up a new buildbot + host machine, with the exception that the slave corresponds to the Android + device, not the host machine itself. +2. Ensure that the buildslave is not yet running: + + $ killall python + +3. Connect the device to the host machine, either through a powered USB hub or + directly to the machine. +4. Make sure that the device is in developer mode and that USB debugging is + enabled. +5. Authorize the device for USB debugging on the host machine by checking the + "always allow" box on dialog box which appears on the Android device after + plugging it into the host. +6. Ensure that the device appears as "connected" when you run the + `which_devices.py` script: + + $ python buildbot/scripts/which_devices.py + +7. Reboot the machine to start the buildslave. + + +### Bringing up a new machine from scratch + +TODO(borenet): Migrate from Google Docs. + +OS-specific instructions are available in a +[Google Doc](https://docs.google.com/document/d/1X7Hvsj33AlBmj-KEWfFbmdCArUJJAICLkB7ipDcxRV8/edit) + + +### Flashing a disk image to a machine + +1. Find the USB key labeled, "Clonezilla" in the SkiaLab and insert it into the + machine. +2. Turn on the machine and load the boot menu. For Shuttle machines, press + \<del\> or \<esc\>. Mac machines require that you plug in the Mac keyboard and + press the \<option\> key at boot. Boot from the USB key. It's typically UEFI + and named something like "FlashBlu" or "Kanguru". +3. At the Clonezilla menu, choose the "to RAM" option. +4. Choose your preferred language. +5. "Don't touch keymap". +6. "Start Clonezilla". +7. "device-image". +8. "local_dev". +9. Unplug the flash drive and plug in the external hard drive labeled, "Disk + images." Wait for the "Attached Enclosure device" message to appear, then + hit \<enter\>. +10. Select the external drive to use for /home/partimag, something like, + "1000GB_ntfs_My_Passport". +11. Select the bot_img directory. +12. Hit \<enter\> to continue. +13. "Beginner" +14. "restoredisk" +15. Select the image to use. Make sure that it's compatible with this machine. +16. Choose the hard drive in the machine. It should be the only option. +17. "y" and "y" +18. Choose "reboot" after flashing the image to the machine. +19. Set the hostname of the machine so that it doesn't conflict with any + existing machines. + +### Capturing a disk image + +1. Make sure that the machine is in a clean state: no pre-existing buildslave + checkouts, extra software, etc. +2. Find the USB key labeled, "Clonezilla" in the SkiaLab and insert it into the + machine. +3. Turn on the machine and load the boot menu. For Shuttle machines, press + \<del\> or \<esc\>. Mac machines require that you plug in the Mac keyboard and + press the \<option\> key at boot. Boot from the USB key. It's typically UEFI + and named something like "FlashBlu" or "Kanguru". +4. At the Clonezilla menu, choose the "to RAM" option. +5. Choose your preferred language. +6. "Don't touch keymap". +7. "Start Clonezilla". +8. "device-image". +9. "local_dev" +10. Unplug the flash drive and plug in the external hard drive labeled, "Disk + images." Wait for the "Attached Enclosure device" message to appear, then + hit \<enter\>. +11. Select the external drive to use for /home/partimag, something like, + "1000GB_ntfs_My_Passport". +12. Select the bot_img directory. +13. "Beginner" +14. "savedisk" +15. Choose a name for the disk image. The convention is: + `skiabot-<hardware type>-<OS>-<disk image revision #>` +12. Choose the hard drive in the machine. It should be the only option. +13. "y" +14. Choose "reboot" or "shut down" when finished. |