diff options
Diffstat (limited to 'objectivec/DevTools/full_mac_build.sh')
| -rwxr-xr-x | objectivec/DevTools/full_mac_build.sh | 169 |
1 files changed, 111 insertions, 58 deletions
diff --git a/objectivec/DevTools/full_mac_build.sh b/objectivec/DevTools/full_mac_build.sh index c8681e26..c673fcba 100755 --- a/objectivec/DevTools/full_mac_build.sh +++ b/objectivec/DevTools/full_mac_build.sh @@ -26,8 +26,9 @@ OPTIONS: Issue a clean before the normal build. -a, --autogen Start by rerunning autogen & configure. - -r, --regenerate-cpp-descriptors - The descriptor.proto is checked in generated, cause it to regenerate. + -r, --regenerate-descriptors + Run generate_descriptor_proto.sh to regenerate all the checked in + proto sources. -j #, --jobs # Force the number of parallel jobs (useful for debugging build issues). --core-only @@ -36,10 +37,16 @@ OPTIONS: Skip the invoke of Xcode to test the runtime on both iOS and OS X. --skip-xcode-ios Skip the invoke of Xcode to test the runtime on iOS. + --skip-xcode-debug + Skip the Xcode Debug configuration. + --skip-xcode-release + Skip the Xcode Release configuration. --skip-xcode-osx Skip the invoke of Xcode to test the runtime on OS X. --skip-objc-conformance Skip the Objective C conformance tests (run on OS X). + --xcode-quiet + Pass -quiet to xcodebuild. EOF } @@ -65,17 +72,20 @@ wrapped_make() { } NUM_MAKE_JOBS=$(/usr/sbin/sysctl -n hw.ncpu) -if [[ "${NUM_MAKE_JOBS}" -lt 4 ]] ; then - NUM_MAKE_JOBS=4 +if [[ "${NUM_MAKE_JOBS}" -lt 2 ]] ; then + NUM_MAKE_JOBS=2 fi DO_AUTOGEN=no DO_CLEAN=no -REGEN_CPP_DESCRIPTORS=no +REGEN_DESCRIPTORS=no CORE_ONLY=no DO_XCODE_IOS_TESTS=yes DO_XCODE_OSX_TESTS=yes +DO_XCODE_DEBUG=yes +DO_XCODE_RELEASE=yes DO_OBJC_CONFORMANCE_TESTS=yes +XCODE_QUIET=no while [[ $# != 0 ]]; do case "${1}" in -h | --help ) @@ -88,8 +98,8 @@ while [[ $# != 0 ]]; do -a | --autogen ) DO_AUTOGEN=yes ;; - -r | --regenerate-cpp-descriptors ) - REGEN_CPP_DESCRIPTORS=yes + -r | --regenerate-descriptors ) + REGEN_DESCRIPTORS=yes ;; -j | --jobs ) shift @@ -108,9 +118,18 @@ while [[ $# != 0 ]]; do --skip-xcode-osx ) DO_XCODE_OSX_TESTS=no ;; + --skip-xcode-debug ) + DO_XCODE_DEBUG=no + ;; + --skip-xcode-release ) + DO_XCODE_RELEASE=no + ;; --skip-objc-conformance ) DO_OBJC_CONFORMANCE_TESTS=no ;; + --xcode-quiet ) + XCODE_QUIET=yes + ;; -*) echo "ERROR: Unknown option: ${1}" 1>&2 printUsage @@ -150,8 +169,12 @@ if [[ "${DO_CLEAN}" == "yes" ]] ; then -project objectivec/ProtocolBuffers_iOS.xcodeproj -scheme ProtocolBuffers ) - "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Debug clean - "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Release clean + if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then + "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Debug clean + fi + if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then + "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Release clean + fi fi if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then XCODEBUILD_CLEAN_BASE_OSX=( @@ -159,13 +182,17 @@ if [[ "${DO_CLEAN}" == "yes" ]] ; then -project objectivec/ProtocolBuffers_OSX.xcodeproj -scheme ProtocolBuffers ) - "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean - "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean + if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then + "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean + fi + if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then + "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean + fi fi fi -if [[ "${REGEN_CPP_DESCRIPTORS}" == "yes" ]] ; then - header "Regenerating the C++ descriptor sources." +if [[ "${REGEN_DESCRIPTORS}" == "yes" ]] ; then + header "Regenerating the descriptor sources." ./generate_descriptor_proto.sh -j "${NUM_MAKE_JOBS}" fi @@ -184,29 +211,8 @@ else cd .. fi -header "Ensuring the ObjC descriptors are current." -# Find the newest input file (protos, compiler, and the generator script). -# (these patterns catch some extra stuff, but better to over sample than under) -readonly NewestInput=$(find \ - src/google/protobuf/*.proto \ - src/.libs src/*.la src/protoc \ - objectivec/generate_descriptors_proto.sh \ - -type f -print0 \ - | xargs -0 stat -f "%m %N" \ - | sort -n | tail -n1 | cut -f2- -d" ") -# Find the oldest output file. -readonly OldestOutput=$(find \ - "${ProtoRootDir}/objectivec/google" \ - -type f -print0 \ - | xargs -0 stat -f "%m %N" \ - | sort -n -r | tail -n1 | cut -f2- -d" ") -# If the newest input is newer than the oldest output, regenerate. -if [[ "${NewestInput}" -nt "${OldestOutput}" ]] ; then - echo ">> Newest input is newer than oldest output, regenerating." - objectivec/generate_descriptors_proto.sh -j "${NUM_MAKE_JOBS}" -else - echo ">> Newest input is older than oldest output, no need to regenerating." -fi +# Ensure the WKT sources checked in are current. +objectivec/generate_well_known_types.sh --check-only -j "${NUM_MAKE_JOBS}" header "Checking on the ObjC Runtime Code" objectivec/DevTools/pddm_tests.py @@ -217,50 +223,78 @@ if ! objectivec/DevTools/pddm.py --dry-run objectivec/*.[hm] objectivec/Tests/*. exit 1 fi +readonly XCODE_VERSION_LINE="$(xcodebuild -version | grep Xcode\ )" +readonly XCODE_VERSION="${XCODE_VERSION_LINE/Xcode /}" # drop the prefix. + if [[ "${DO_XCODE_IOS_TESTS}" == "yes" ]] ; then XCODEBUILD_TEST_BASE_IOS=( xcodebuild -project objectivec/ProtocolBuffers_iOS.xcodeproj -scheme ProtocolBuffers ) + if [[ "${XCODE_QUIET}" == "yes" ]] ; then + XCODEBUILD_TEST_BASE_IOS+=( -quiet ) + fi # Don't need to worry about form factors or retina/non retina; # just pick a mix of OS Versions and 32/64 bit. # NOTE: Different Xcode have different simulated hardware/os support. - readonly XCODE_VERSION_LINE="$(xcodebuild -version | grep Xcode\ )" - readonly XCODE_VERSION="${XCODE_VERSION_LINE/Xcode /}" # drop the prefix. - IOS_SIMULATOR_NAME="Simulator" case "${XCODE_VERSION}" in 6.* ) - echo "ERROR: Xcode 6.3/6.4 no longer supported for building, please use 7.0 or higher." 1>&2 + echo "ERROR: Xcode 6.3/6.4 no longer supported for building, please use 8.0 or higher." 1>&2 exit 10 ;; - 7.1* ) + 7.* ) + echo "ERROR: Xcode 7.x no longer supported for building, please use 8.0 or higher." 1>&2 + exit 11 + ;; + 8.0* ) + # The 8.* device seem to hang and never start under Xcode 8. + XCODEBUILD_TEST_BASE_IOS+=( + -destination "platform=iOS Simulator,name=iPhone 4s,OS=9.0" # 32bit + -destination "platform=iOS Simulator,name=iPhone 7,OS=10.0" # 64bit + ) + ;; + 8.[1-3]* ) XCODEBUILD_TEST_BASE_IOS+=( -destination "platform=iOS Simulator,name=iPhone 4s,OS=8.1" # 32bit - -destination "platform=iOS Simulator,name=iPhone 6,OS=9.0" # 64bit - -destination "platform=iOS Simulator,name=iPad 2,OS=8.1" # 32bit - -destination "platform=iOS Simulator,name=iPad Air,OS=9.0" # 64bit + -destination "platform=iOS Simulator,name=iPhone 7,OS=latest" # 64bit ) ;; - 7.* ) + 9.[0-2]* ) XCODEBUILD_TEST_BASE_IOS+=( -destination "platform=iOS Simulator,name=iPhone 4s,OS=8.1" # 32bit - -destination "platform=iOS Simulator,name=iPhone 6,OS=9.2" # 64bit - -destination "platform=iOS Simulator,name=iPad 2,OS=8.1" # 32bit - -destination "platform=iOS Simulator,name=iPad Air,OS=9.2" # 64bit + -destination "platform=iOS Simulator,name=iPhone 7,OS=latest" # 64bit + # 9.0-9.2 all seem to often fail running destinations in parallel + -disable-concurrent-testing + ) + ;; + 9.3* ) + XCODEBUILD_TEST_BASE_IOS+=( + # Xcode 9.3 chokes targeting iOS 8.x - http://www.openradar.me/39335367 + -destination "platform=iOS Simulator,name=iPhone 4s,OS=9.0" # 32bit + -destination "platform=iOS Simulator,name=iPhone 7,OS=latest" # 64bit + # 9.3 also seems to often fail running destinations in parallel + -disable-concurrent-testing ) ;; * ) - echo "Time to update the simulator targets for Xcode ${XCODE_VERSION}" + echo "" + echo "ATTENTION: Time to update the simulator targets for Xcode ${XCODE_VERSION}" + echo "" + echo "Build aborted!" exit 2 ;; esac - header "Doing Xcode iOS build/tests - Debug" - "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Debug test - header "Doing Xcode iOS build/tests - Release" - "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Release test + if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then + header "Doing Xcode iOS build/tests - Debug" + "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Debug test + fi + if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then + header "Doing Xcode iOS build/tests - Release" + "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Release test + fi # Don't leave the simulator in the developer's face. - killall "${IOS_SIMULATOR_NAME}" + killall Simulator 2> /dev/null || true fi if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then XCODEBUILD_TEST_BASE_OSX=( @@ -270,13 +304,32 @@ if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then # Since the ObjC 2.0 Runtime is required, 32bit OS X isn't supported. -destination "platform=OS X,arch=x86_64" # 64bit ) - header "Doing Xcode OS X build/tests - Debug" - "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Debug test - header "Doing Xcode OS X build/tests - Release" - "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Release test + if [[ "${XCODE_QUIET}" == "yes" ]] ; then + XCODEBUILD_TEST_BASE_OSX+=( -quiet ) + fi + case "${XCODE_VERSION}" in + 6.* ) + echo "ERROR: Xcode 6.3/6.4 no longer supported for building, please use 8.0 or higher." 1>&2 + exit 10 + ;; + 7.* ) + echo "ERROR: The unittests include Swift code that is now Swift 3.0." 1>&2 + echo "ERROR: Xcode 8.0 or higher is required to build the test suite, but the library works with Xcode 7.x." 1>&2 + exit 11 + ;; + esac + if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then + header "Doing Xcode OS X build/tests - Debug" + "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Debug test + fi + if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then + header "Doing Xcode OS X build/tests - Release" + "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Release test + fi fi if [[ "${DO_OBJC_CONFORMANCE_TESTS}" == "yes" ]] ; then + header "Running ObjC Conformance Tests" cd conformance wrapped_make -j "${NUM_MAKE_JOBS}" test_objc cd .. |