\def\fontdefs{\psfamily{bsf}{r}{c}{b}{b}{ri}{ri}{ro}{bo}\def\mainmagstep{1200}} \input texinfo @c @c $Id$ @c @c NB: the first line of this file uses a non-standard TeXinfo @c hack to print in Serifa fonts. It has no effect if you don't have @c my hacked version of TeXinfo - da. @c @c @setfilename PG-adapting.info @settitle Adapting Proof General @setchapternewpage odd @paragraphindent 0 @c A flag for whether to include the front image in the @c DVI file. You can download the front image from @c http://www.proofgeneral.org/ProofGeneralPortrait.eps.gz @c then put it into this directory and 'make dvi' (pdf,ps) @c will set the flag below automatically. @clear haveeps @iftex @afourpaper @end iftex @c @c Some URLs. @c FIXME: unfortunately, broken in buggy pdftexinfo. @c so removed for now. @set URLxsymbol http://www.fmi.uni-passau.de/~wedler/x-symbol/ @set URLisamode http://zermelo.dcs.ed.ac.uk/~isamode @set URLpghome http://www.proofgeneral.org @set URLpglatestrpm http://www.proofgeneral.org/ProofGeneral-latest.noarch.rpm @set URLpglatesttar http://www.proofgeneral.org/ProofGeneral-latest.tar.gz @set URLpglatestdev http://www.proofgeneral.org/ProofGeneral-devel-latest.tar.gz @c @c @c @c IMPORTANT NOTE ABOUT THIS TEXINFO FILE: @c I've tried keep full node lines *out* of this file because Emacs makes a @c mess of updating them and they are a nuisance to do by hand. @c Instead, rely on makeinfo and friends to do the equivalent job. @c For this to work, we must follow each node @c immediately with a section command, i.e.: @c @c @node node-name @c @c @c And each section with lower levels must have a menu command in @c it. Menu updating with Emacs is a bit better than node updating, @c but tends to delete the first section of the file in XEmacs! @c (it's better in FSF Emacs at the time of writing). @c @c @c reminder about references: @c @xref{node} blah start of sentence: See [ref] @c blah (@pxref{node}) blah bla (see [ref]), best at end of sentence @c @ref{node} without "see". Careful for info. @set version 3.3pre @set xemacsversion 21.1 @set fsfversion 20.7 @set last-update August 2001 @set rcsid $Id$ @ifinfo @format START-INFO-DIR-ENTRY * Proof General Adapting: (PG-adapting). How to adapt Proof General for new provers END-INFO-DIR-ENTRY @end format @end ifinfo @c @c MACROS @c @c define one here for a command with a key-binding? @c @c I like the idea, but it's maybe against the TeXinfo @c style to fix together a command and its key-binding. @c @c merge functions and variables into concept index. @c @syncodeindex fn cp @c @syncodeindex vr cp @c merge functions into variables index @c @syncodeindex fn vr @finalout @titlepage @title Adapting Proof General @subtitle Proof General --- Organize your proofs! @sp 1 @subtitle Adapting Proof General @value{version} to new provers @subtitle @value{last-update} @subtitle @b{www.proofgeneral.org} @c nested ifs fail here completely, WHY? @iftex @ifset haveeps @c @vskip 1cm @c The .eps file takes 8.4M! A pity texi can't seem @c to deal with gzipped files? (goes down to 1.7M). @c But this still seems too much to put into the @c PG distribution just for an image on the manual page, @c so we take it out for now. @c Ideally would like some way of generating eps from @c the .jpg file. @c image{ProofGeneralPortrait} @end ifset @end iftex @author David Aspinall with T. Kleymann @page @vskip 0pt plus 1filll This manual and the program Proof General are Copyright @copyright{} 2000,2001 Proof General team, LFCS Edinburgh. @c @c COPYING NOTICE @c @ignore Permission is granted to process this file through TeX and print the results, provided the printed document carries copying permission notice identical to this one except for the removal of this paragraph (this paragraph not being relevant to the printed manual). @end ignore @sp 2 Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. @sp 2 This manual documents Proof General, Version @value{version}, for use with XEmacs @value{xemacsversion} and FSF GNU Emacs @value{fsfversion} or later versions. Visit Proof General on the web at @code{http://www.proofgeneral.org} Version control: @code{@value{rcsid}} @end titlepage @page @ifinfo @node Top @top Proof General This file documents configuration mechanisms for version @value{version} of @b{Proof General}, a generic Emacs interface for proof assistants. Proof General @value{version} has been tested with XEmacs @value{xemacsversion} and FSF GNU Emacs @value{fsfversion}. It is supplied ready customized for the proof assistants Coq, Lego, Isabelle, and HOL. This manual contains information for customizing to new proof assistants; see the user manual for details about how to use Proof General. @menu * Introduction:: * Beginning with a new prover:: * Menus and toolbar and user-level commands:: * Proof script settings:: * Proof shell settings:: * Goals buffer settings:: * Splash screen settings:: * Global constants:: * Handling multiple files:: * Configuring Font Lock:: * Configuring X-Symbol:: * Writing more lisp code:: * Internals of Proof General:: * Plans and ideas:: * Demonstration Instantiations:: * Function Index:: * Variable Index:: * Concept Index:: @end menu @end ifinfo @node Introduction @unnumbered Introduction Welcome to Proof General! Proof General a generic Emacs-based interface for proof assistants. This manual contains information for adapting Proof General to new proof assistants, and some sketches of the internal implementation. It is not intended for most ordinary users of the system. For full details about how to use Proof General, and information on its availability and installation, please see the main Proof General manual which should accompany this one. We positively encourage the support of new systems. Proof General has grown more flexible and useful as it has been adapted to more proof assistants. Typically, adding support for a new prover improves support for others, both because the code becomes more robust, and because new ideas are brought into the generic setting. Notice that the Proof General framework has been built as a "product line architecture": generality has been introduced step-by-step in a demand-driven way, rather than at the outset as a grand design. Despite this strategy, the interface has a surprisingly clean structure. The approach means that we fully expect hiccups when adding support for new assistants, so the generic core may need extension or modification. To support this we have an open development method: if you require changes in the generic support, please contact us (or make adjustments yourself and send them to us). Proof General has a home page at @uref{http://www.proofgeneral.org}. Visit this page for the latest version of the manuals, other documentation, system downloads, etc. @menu * Future:: * Credits:: @end menu @node Future @unnumberedsec Future @cindex Proof General Kit @cindex Future The aim of the Proof General project is to provide a powerful and configurable interfaces which help user-interaction with interactive proof assistants. The strategy Proof General uses is to targets power users rather than novices; other interfaces have often neglected this class of users. But we do include general user interface niceties, such as toolbar and menus, which make use easier for all. Proof General has been Emacs based so far, but plans are afoot to liberate it from the points and parentheses of Emacs Lisp. The successor project Proof General Kit proposes that proof assistants use a @i{standard} XML-based protocol for interactive proof, dubbed @b{PGIP}. PGIP is a middleware for interactive proof tools and interface components. Rather than configuring Proof General for your proof assistant, you will need to configure your proof assistant to understand PGIP. There is a similarity however; the design of PGIP was based heavily on the Emacs Proof General framework. This means that effort on customizing Emacs Proof General to a new proof assistant is worthwhile even in the light of PGIP: it will help you to understand Proof General's model of interaction, and moreover, we hope to use the Emacs customizations to provide experimental filters which allow supported provers to communicate using PGIP. At the time of writing, these ideas are in early stages. For latest details, or to become involved, see @uref{http://www.proofgeneral.org/kit, the Proof General Kit webpage}. @node Credits @unnumberedsec Credits This manual was put together and mostly written by David Aspinall. Thomas Kleymann wrote some of the text in Chapter 8. Much of the content is generated automatically from Emacs docstrings, some of which have been written by other Proof General developers. @node Beginning with a new prover @chapter Beginning with a new prover Proof General has about 100 configuration variables which are set on a per-prover basis to configure the various features. It may sound like a lot but don't worry! Many of the variables occur in pairs (typically regular expressions matching the start and end of some text), and you can begin by setting just a fraction of the variables to get the basic features of script management working. The bare minimum for a working prototype is about 25 simple settings. For more advanced features you may need (or want) to write some Emacs Lisp. If you're adding new functionality please consider making it generic for different proof assistants, if appropriate. When writing your modes, please follow the Emacs Lisp conventions @inforef{Style Tips, ,lispref}. The configuration variables are declared in the file @file{generic/proof-config.el}. The details in the central part of this manual are based on the contents of that file, beginning in @ref{Menus and toolbar and user-level commands}, and continuing until @ref{Global constants}. Other chapters cover the details of configuring for multiple files and for supporting the other Emacs packages mentioned in the user manual (@i{Support for other Packages}). If you write additional Elisp code interfacing to Proof General, you can find out about some useful functions by reading @ref{Writing more lisp code}. The last chapter of this manual describes some of the internals of Proof General, in case you are interested, maybe because you need to extend the generic core to do something new. In the rest of this chapter we describe the general mechanisms for instantiating Proof General. @menu * Overview of adding a new prover:: * Demonstration instance and easy configuration:: * Major modes used by Proof General:: @end menu @node Overview of adding a new prover @section Overview of adding a new prover Each proof assistant supported has its own subdirectory under @code{proof-home-directory}, used to store a root elisp file and any other files needed to adapt the proof assistant for Proof General. @c Here we show how a minimal configuration of Proof General works for @c Isabelle, without any special changes to Isabelle. Here is how to go about adding support for a new prover. @enumerate @item Make a directory called @file{myassistant/} under the Proof General home directory @code{proof-home-directory}, to put the specific customization and associated files in. @item Add a file @file{myassistant.el} to the new directory. @item Edit @file{proof-site.el} to add a new entry to the @code{proof-assistants-table} variable. The new entry should look like this: @lisp (myassistant "My Proof Assistant" "\\.myasst$") @end lisp The first item is used to form the name of the internal variables for the new mode as well as the directory and file where it loads from. The second is a string, naming the proof assistant. The third item is a regular expression to match names of proof script files for this assistant. See the documentation of @code{proof-assistant-table} for more details. @item Define the new Proof General modes in @file{myassistant.el}, by setting configuration variables to customize the behaviour of the generic modes. @end enumerate @c You could begin by setting a minimum number of the variables, then @c adjust the settings via the customize menus, under Proof-General -> @c Internals. @c TEXI DOCSTRING MAGIC: proof-assistant-table @defopt proof-assistant-table Proof General's table of supported proof assistants.@* Extend this table to add a new proof assistant. Each entry is a list of the form @lisp (@var{symbol} @var{name} @var{automode-regexp}) @end lisp The @var{name} is a string, naming the proof assistant. The @var{symbol} is used to form the name of the mode for the assistant, @samp{SYMBOL-mode}, run when files with @var{automode-regexp} are visited. @var{symbol} is also used to form the name of the directory and elisp file for the mode, which will be @lisp @var{proof-home-directory}/@var{symbol}/@var{symbol}.el @end lisp where @samp{PROOF-HOME-DIRECTORY} is the value of the variable @code{proof-home-directory}. The default value is @code{((demoisa "Isabelle Demo" "\\.ML$") (isar "Isabelle/Isar" "\\.thy$") (isa "Isabelle" "\\.ML$\\|\\.thy$") (lego "LEGO" "\\.l$") (coq "Coq" "\\.v$") (phox "PhoX" "\\.phx$") (hol98 "HOL" "\\.sml$") (acl2 "ACL2" "\\.acl2$") (plastic "Plastic" "\\.lf$") (twelf "Twelf" "\\.elf$"))}. @end defopt The final step of the description above is where the work lies. There are two basic methods. You can write some Emacs lisp functions and define the modes using the macro @code{define-derived-mode}. Or you can use the new easy configuration mechanism of Proof General 3.0 described in the next section, which calls @code{define-derived-mode} for you. You still need to know which configuration variables should be set, and how to set them. The documentation below (and inside Emacs) should help with that, but the best way to begin might be to use an existing Proof General instance as an example. Even better is to use the new easy configuration mechanism, which avoids the need to call @code{define-derived-mode} directly. @node Demonstration instance and easy configuration @section Demonstration instance and easy configuration Proof General is supplied with a demonstration instance for Isabelle which configures the basic features. This is a whittled down version of Isabelle Proof General, which you can use as a template to get support for a new assistant going. Check the directory @file{demoisa} for the two files @file{demoisa.el} and @file{demoisa-easy.el}. The file @file{demoisa.el} follows the scheme described in @ref{Major modes used by Proof General}. It uses the Emacs Lisp macro @code{define-derived-mode} to define the four modes for a Proof General instance, by inheriting from the generic code. Settings which configure Proof General are made by functions called from within each mode, as appropriate. The file @file{demoisa-easy.el} uses a new simplified mechanism to achieve (virtually) the same result. It uses the macro @code{proof-easy-config} defined in @file{proof-easy-configl.el} to make all of the settings for the Proof General instance in one go, defining the derived modes automatically using a regular naming scheme. No lisp code is used in this file except the call to this macro. The minor difference in the end result is that all the variables are set at once, rather than inside each mode. But since the configuration variables are all global variables anyway, this makes no real difference. The macro @code{proof-easy-config} is called like this: @lisp (proof-easy-config @var{myprover} "@var{MyProver}" @var{config_1} @var{val_1} ... @var{config_n} @var{val_n}) @end lisp The main body of the macro call is like the body of a @code{setq}. It contains pairs of variables and value settings. The first argument to the macro is a symbol defining the mode root, the second argument is a string defining the mode name. These should be the same as the first part of the entry in @code{proof-assistant-table} for your prover. @xref{Overview of adding a new prover}. After the call to @code{proof-easy-config}, the new modes @code{@var{myprover}-mode}, @code{@var{myprover}-shell-mode}, @code{@var{myprover}-response-mode}, and @code{@var{myprover}-goals-mode} will be defined. The configuration variables in the body will be set immediately. This mechanism is in fact recommended for new instantiations of Proof General since it follows a regular pattern, and we can more easily adapt it in the future to new versions of Proof General. Even Emacs Lisp experts should prefer the simplified mechanism. If you want to set some buffer-local variables in your Proof General modes, or invoke supporting lisp code, this can easily be done by adding functions to the appropriate mode hooks after the @code{proof-easy-config} call. For example, to add extra settings for the shell mode for @code{demoisa}, we could do this: @lisp (defun demoisa-shell-extra-config () @var{extra configuration ...} ) (add-hook 'demoisa-shell-mode-hook 'demoisa-shell-extra-config) @end lisp The function to do extra configuration @code{demoisa-shell-extra-config} is then called as the final step when @code{demoisa-shell-mode} is entered (be wary, this will be after the generic @code{proof-shell-config-done} is called, so it will be too late to set normal configuration variables which may be examined by @code{proof-shell-config-done}). @node Major modes used by Proof General @section Major modes used by Proof General There are four major modes used by Proof General, one for each type of buffer it handles. The buffer types are: script, shell, response and goals. Each of these has a generic mode, respectively: @code{proof-mode}, @code{proof-shell-mode}, @code{proof-response-mode}, and @code{proof-goals-mode}. The pattern for defining the major mode for an instance of Proof General is to use @code{define-derived-mode} to define a specific mode to inherit from each generic one, like this: @lisp (define-derived-mode myass-shell-mode proof-shell-mode "MyAss shell" nil (myass-shell-config) (proof-shell-config-done)) @end lisp Where @code{myass-shell-config} is a function which sets the configuration variables for the shell (@pxref{Proof shell settings}). It's important that each of your modes invokes one of the functions @code{proof-config-done}, @code{proof-shell-config-done}, @code{proof-response-config-done}, or @code{proof-goals-config-done} once it has set its configuration variables. These functions finalize the configuration of the mode. For each mode, there is a configuration variable which names it so that Proof General can set buffers to the proper mode, or find buffers in that mode. These are documented below, and set like this: @lisp (setq proof-mode-for-script 'myass-mode) @end lisp where @code{myass-mode} is your major mode for scripts, derived from @code{proof-mode}. You must set these variables before the proof shell is started; one way to do this is inside a function which is called from the hook @code{pre-shell-start-hook}. See the file @file{demoisa.el} for details of how to do this. @c TEXI DOCSTRING MAGIC: proof-mode-for-script @defvar proof-mode-for-script Mode for proof script buffers.@* This is used by Proof General to find out which buffers contain proof scripts. The regular name for this is -mode. If you use any of the convenience macros Proof General provides for defining commands etc, then you should stick to this name. Suggestion: this can be set in the script mode configuration. @end defvar @c TEXI DOCSTRING MAGIC: proof-mode-for-shell @defvar proof-mode-for-shell Mode for proof shell buffers.@* Usually customised for specific prover. Suggestion: this can be set a function called by @samp{pre-shell-start-hook}. @end defvar @c TEXI DOCSTRING MAGIC: proof-mode-for-response @defvar proof-mode-for-response Mode for proof response buffer.@* Usually customised for specific prover. Suggestion: this can be set a function called by @samp{pre-shell-start-hook}. @end defvar @c TEXI DOCSTRING MAGIC: proof-mode-for-goals @defvar proof-mode-for-goals Mode for proof state display buffers.@* Usually customised for specific prover. Suggestion: this can be set a function called by @samp{pre-shell-start-hook}. @end defvar @node Menus and toolbar and user-level commands @chapter Menus, toolbar, and user-level commands The variables described in this chapter should be set in the script mode before @code{proof-config-done} is called. (Toolbar configuration must be made before @file{proof-toolbar.el} is loaded, which usually is triggered automatically by an attempt to display the toolbar). @menu * Settings for generic user-level commands:: * Menu configuration:: * Toolbar configuration:: @end menu @node Settings for generic user-level commands @section Settings for generic user-level commands @c TEXI DOCSTRING MAGIC: proof-assistant-home-page @defvar proof-assistant-home-page Web address for information on proof assistant.@* Used for Proof General's help menu. @end defvar @c TEXI DOCSTRING MAGIC: proof-context-command @defvar proof-context-command Command to display the context in proof assistant. @end defvar @c TEXI DOCSTRING MAGIC: proof-info-command @defvar proof-info-command Command to ask for help or information in the proof assistant.@* String or fn. If a string, the command to use. If a function, it should return the command string to insert. @end defvar @c TEXI DOCSTRING MAGIC: proof-showproof-command @defvar proof-showproof-command Command to display proof state in proof assistant. @end defvar @c TEXI DOCSTRING MAGIC: proof-goal-command @defvar proof-goal-command Command to set a goal in the proof assistant. String or fn.@* If a string, the format character @samp{%s} will be replaced by the goal string. If a function, it should return the command string to insert. @end defvar @c TEXI DOCSTRING MAGIC: proof-save-command @defvar proof-save-command Command to save a proved theorem in the proof assistant. String or fn.@* If a string, the format character @samp{%s} will be replaced by the theorem name. If a function, it should return the command string to insert. @end defvar @c TEXI DOCSTRING MAGIC: proof-find-theorems-command @defvar proof-find-theorems-command Command to search for a theorem containing a given term. String or fn.@* If a string, the format character @samp{%s} will be replaced by the term. If a function, it should return the command string to insert. @end defvar @node Menu configuration @section Menu configuration As well as the generic Proof General menu, each proof assistant is provided with a specific menu which can have prover-specific commands. Proof General puts some default things on this menu, including the commands to start/stop the prover, and the user-extensible "Favourites" menu. @c TEXI DOCSTRING MAGIC: PA-menu-entries @defvar PA-menu-entries Extra entries for proof assistant specific menu. @* A list of menu items [@var{name} @var{callback} @var{enabler} ...]. See the documentation of @samp{@code{easy-menu-define}} for more details. @end defvar @c TEXI DOCSTRING MAGIC: PA-help-menu-entries @defvar PA-help-menu-entries Extra entries for help submenu for proof assistant specific help menu.@* A list of menu items [@var{name} @var{callback} @var{enabler} ...]. See the documentation of @samp{@code{easy-menu-define}} for more details. @end defvar @node Toolbar configuration @section Toolbar configuration Unlike the menus, Proof General has only one toolbar. For the "generic" aspect of Proof General to work well, we shouldn't change (the meaning of) the existing toolbar buttons too far. This would discourage people from experimenting with different proof assistants when they don't really know them, which is one of the advantages that Proof General brings. But in case it is hard to map some of the generic buttons onto functions in particular provers, and to allow extra buttons, there is a mechanism for adjustment. I used The Gimp to create the buttons for Proof General. The development distribution includes a button blank and some notes in @file{etc/notes.txt} about making new buttons. @c TEXI DOCSTRING MAGIC: proof-toolbar-entries-default @defvar proof-toolbar-entries-default Example value for proof-toolbar-entries. Also used to define Scripting menu.@* This gives a bare toolbar that works for any prover, providing the appropriate configuration variables are set. To add/remove prover specific buttons, adjust the @samp{-toolbar-entries} variable, and follow the pattern in @samp{@code{proof-toolbar}.el} for defining functions, images. @end defvar @c TEXI DOCSTRING MAGIC: PA-toolbar-entries @defvar PA-toolbar-entries List of entries for Proof General toolbar and Scripting menu.@* Format of each entry is (@var{token} @var{menuname} @var{tooltip} @var{enabler-p}). For each @var{token}, we expect an icon with base filename @var{token}, a function proof-toolbar-, and (optionally) an enabler proof-toolbar--enable-p. If @var{menuname} is nil, item will not appear on the scripting menu. If @var{tooltip} is nil, item will not appear on the toolbar. The default value is @samp{@code{proof-toolbar-entries-default}} which contains the standard Proof General buttons. @end defvar Here's an example of how to remove a button, from @file{af2.el}: @lisp (setq af2-toolbar-entries (remassoc 'state af2-toolbar-entries)) @end lisp @c defgroup proof-script @node Proof script settings @chapter Proof script settings The variables described in this chapter should be set in the script mode before @code{proof-config-done} is called. These configure the mode for the script buffer. The settings here configure the recognition of commands in the proof script, and also control some of the behaviour of script management. @menu * Recognizing commands and comments:: * Recognizing proofs:: * Recognizing other elements:: * Configuring undo behaviour:: * Nested proofs:: * Safe (state-preserving) commands:: * Activate scripting hook:: * Automatic multiple files:: * Completions:: @end menu @node Recognizing commands and comments @section Recognizing commands and comments The first four settings configure the generic parsing strategy for commands in the proof script. Usually only one of these three needs to be set. If the generic parsing functions are not flexible for your needs, you can supply a value for @code{proof-script-parse-function}. Note that for the generic functions to work properly, it is @strong{essential} that you set the syntax table for your mode properly, so that comments and strings are recognized. See the Emacs documentation to discover how to do this (particularly for the function @code{modify-syntax-entry}). @xref{Proof script mode}, for more details of the parsing functions. @c TEXI DOCSTRING MAGIC: proof-terminal-char @defvar proof-terminal-char Character which terminates every command sent to proof assistant. nil if none. To configure command recognition properly, you must set at least one of these: @samp{@code{proof-script-sexp-commands}}, @samp{@code{proof-script-command-end-regexp}}, @samp{@code{proof-script-command-start-regexp}}, @samp{@code{proof-terminal-char}}, or @samp{@code{proof-script-parse-function}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-script-sexp-commands @defvar proof-script-sexp-commands Non-nil if proof script has a LISP-like syntax, and commands are @code{top-level} sexps.@* You should set this variable in script mode configuration. To configure command recognition properly, you must set at least one of these: @samp{@code{proof-script-sexp-commands}}, @samp{@code{proof-script-command-end-regexp}}, @samp{@code{proof-script-command-start-regexp}}, @samp{@code{proof-terminal-char}}, or @samp{@code{proof-script-parse-function}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-script-command-start-regexp @defvar proof-script-command-start-regexp Regular expression which matches start of commands in proof script.@* You should set this variable in script mode configuration. To configure command recognition properly, you must set at least one of these: @samp{@code{proof-script-sexp-commands}}, @samp{@code{proof-script-command-end-regexp}}, @samp{@code{proof-script-command-start-regexp}}, @samp{@code{proof-terminal-char}}, or @samp{@code{proof-script-parse-function}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-script-command-end-regexp @defvar proof-script-command-end-regexp Regular expression which matches end of commands in proof script.@* You should set this variable in script mode configuration. To configure command recognition properly, you must set at least one of these: @samp{@code{proof-script-sexp-commands}}, @samp{@code{proof-script-command-end-regexp}}, @samp{@code{proof-script-command-start-regexp}}, @samp{@code{proof-terminal-char}}, or @samp{@code{proof-script-parse-function}}. @end defvar The next four settings configure the comment syntax. Notice that to get reliable behaviour of the parsing functions, you may need to modify the syntax table for your prover's mode. Read the Elisp manual for details about that. @c TEXI DOCSTRING MAGIC: proof-comment-start @defvar proof-comment-start String which starts a comment in the proof assistant command language.@* The script buffer's @code{comment-start} is set to this string plus a space. Moreover, comments are usually ignored during script management, and not sent to the proof process. You should set this variable for reliable working of Proof General, as well as @samp{@code{proof-comment-end}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-comment-start-regexp @defvar proof-comment-start-regexp Regexp which matches a comment start in the proof command language. The default value for this is set as (@code{regexp-quote} @code{proof-comment-start}) but you can set this variable to something else more precise if necessary. @end defvar @c TEXI DOCSTRING MAGIC: proof-comment-end @defvar proof-comment-end String which ends a comment in the proof assistant command language.@* The script buffer's @code{comment-end} is set to a space plus this string. See also @samp{@code{proof-comment-start}}. You should set this variable for reliable working of Proof General, @end defvar @c TEXI DOCSTRING MAGIC: proof-comment-end-regexp @defvar proof-comment-end-regexp Regexp which matches a comment end in the proof command language. The default value for this is set as (@code{regexp-quote} @code{proof-comment-end}) but you can set this variable to something else more precise if necessary. @end defvar @c TEXI DOCSTRING MAGIC: proof-case-fold-search @defvar proof-case-fold-search Value for @code{case-fold-search} when recognizing portions of proof scripts.@* Also used for completion, via @samp{@code{proof-script-complete}}. The default value is @samp{nil}. If your prover has a case @strong{insensitive} input syntax, @code{proof-case-fold-search} should be set to @samp{t} instead. NB: This setting is not used for matching output from the prover. @end defvar @node Recognizing proofs @section Recognizing proofs Up to three settings each may be supplied for recognizing goal-like and save-like commands. The @code{-with-hole-} settings are used to make a record of the name of the theorem proved, and also to build a default value for the rather complicated setting @code{proof-script-next-entity-regexps}, which activates the @i{function menu} feature. The @code{-p} subsidiary predicates were added to allow more discriminating behaviour for particular proof assistants. (This is a typical example of where the core framework needs some additional generalization, to simplify matters, and allow for a smooth handling of nested proofs). @c TEXI DOCSTRING MAGIC: proof-goal-command-regexp @defvar proof-goal-command-regexp Matches a goal command in the proof script. @* This is used (1) to make the default value for @samp{@code{proof-goal-command-p}}, used as an important part of script management to find the start of an atomic undo block, and (2) to construct the default for @samp{@code{proof-script-next-entity-regexps}} used for function menus. @end defvar @c TEXI DOCSTRING MAGIC: proof-goal-with-hole-regexp @defvar proof-goal-with-hole-regexp Regexp which matches a command used to issue and name a goal.@* The name of the theorem is build from the variable @code{proof-goal-with-hole-result} using the same convention as @code{query-replace-regexp}. Used for setting names of goal..save regions and for default @code{function-menu} configuration in @code{proof-script-find-next-entity}. It's safe to leave this setting as nil. @end defvar @c TEXI DOCSTRING MAGIC: proof-goal-command-p @defvar proof-goal-command-p A function to test: is this really a goal command? This is added as a more refined addition to @code{proof-goal-command-regexp}, to solve the problem that Coq and some other provers can have goals which look like definitions, etc. (In the future we may generalize @code{proof-goal-command-regexp} instead). @end defvar @c TEXI DOCSTRING MAGIC: proof-save-command-regexp @defvar proof-save-command-regexp Matches a save command. @end defvar @c TEXI DOCSTRING MAGIC: proof-save-with-hole-regexp @defvar proof-save-with-hole-regexp Regexp which matches a command to save a named theorem.@* The name of the theorem is build from the variable @code{proof-save-with-hole-result} using the same convention as @code{query-replace-regexp}. Used for setting names of goal..save regions and for default @code{function-menu} configuration in @code{proof-script-find-next-entity}. It's safe to leave this setting as nil. @end defvar @c TEXI DOCSTRING MAGIC: proof-completed-proof-behaviour @defvar proof-completed-proof-behaviour Indicates how Proof General treats commands beyond the end of a proof.@* Normally goal...save regions are "closed", i.e. made atomic for undo. But once a proof has been completed, there may be a delay before the "save" command appears --- or it may not appear at all. Unless nested proofs are supported, this can spoil the undo-behaviour in script management since once a new goal arrives the old undo history may be lost in the prover. So we allow Proof General to close off the goal..[save] region in more flexible ways. The possibilities are: @lisp nil - nothing special; close only when a save arrives @code{'closeany} - close as soon as the next command arrives, save or not @code{'closegoal} - close when the next "goal" command arrives @code{'extend} - keep extending the closed region until a save or goal. @end lisp If your proof assistant allows nested goals, it will be wrong to close off the portion of proof so far, so this variable should be set to nil. There is no built-in understanding of the undo behaviour of nested proofs; instead there is some support for un-nesting nested proofs in the @code{proof-lift-global} mechanism. (Of course, this is risky in case of nested contexts!) @end defvar @c TEXI DOCSTRING MAGIC: proof-really-save-command-p @defvar proof-really-save-command-p Is this really a save command? This is a more refined addition to @code{proof-save-command-regexp}. It should be a function taking a span and command as argument, and can be used to track nested proofs. (See what is done in isar/ for example). In the future, this setting should be removed when the generic core is extended to handle nested proofs smoothly. @end defvar @node Recognizing other elements @section Recognizing other elements To configure the @i{function menu} feature, there are a couple of settings. These can be used to recognize named proofs, and other elements in the proof script as well. @c TEXI DOCSTRING MAGIC: proof-script-next-entity-regexps @defvar proof-script-next-entity-regexps Regular expressions to help find definitions and proofs in a script.@* This is the list of the form @lisp (@var{anyentity-regexp} @var{discriminator-regexp} ... @var{discriminator-regexp}) @end lisp The idea is that @var{anyentity-regexp} matches any named entity in the proof script, on a line where the name appears. This is assumed to be the start or the end of the entity. The discriminators then test which kind of entity has been found, to get its name. A @var{discriminator-regexp} has one of the forms @lisp (@var{regexp} @var{matchnos}) (@var{regexp} @var{matchnos} @code{'backward} @var{backregexp}) (@var{regexp} @var{matchnos} @code{'forward} @var{forwardregexp}) @end lisp If @var{regexp} matches the string captured by @var{anyentity-regexp}, then @var{matchnos} are the match numbers for the substrings which name the entity (these may be either a single number or a list of numbers). If @code{'backward} @var{backregexp} is present, then the start of the entity is found by searching backwards for @var{backregexp}. Conversely, if @code{'forward} @var{forwardregexp} is found, then the end of the entity is found by searching forwards for @var{forwardregexp}. Otherwise, the start and end of the entity will be the region matched by @var{anyentity-regexp}. This mechanism allows fairly complex parsing of the buffer, in particular, it allows for goal..save regions which are named only at the end. However, it does not parse strings, comments, or parentheses. This variable may not need to be set: a default value which should work for goal..saves is calculated from @code{proof-goal-with-hole-regexp}, @code{proof-goal-command-regexp}, and @code{proof-save-with-hole-regexp}. @end defvar @c TEXI DOCSTRING MAGIC: proof-script-find-next-entity-fn @defvar proof-script-find-next-entity-fn Name of function to find next interesting entity in a script buffer.@* This is used to configure @code{func-menu}. The default value is @code{proof-script-find-next-entity}, which searches for the next entity based on fume-function-name-regexp which by default is set from @code{proof-script-next-entity-regexps}. The function should move point forward in a buffer, and return a cons cell of the name and the beginning of the entity's region. Note that @code{proof-script-next-entity-regexps} is set to a default value from @code{proof-goal-with-hole-regexp} and @code{proof-save-with-hole-regexp} in the function @code{proof-config-done}, so you may not need to worry about any of this. See whether function menu does something sensible by default. @end defvar @node Configuring undo behaviour @section Configuring undo behaviour The settings here are used to configure the way "undo" commands are calculated. @c TEXI DOCSTRING MAGIC: proof-non-undoables-regexp @defvar proof-non-undoables-regexp Regular expression matching commands which are @strong{not} undoable.@* Used in default functions @samp{@code{proof-generic-state-preserving-p}} and @samp{@code{proof-generic-count-undos}}. If you don't use those, may be left as nil. @end defvar @c TEXI DOCSTRING MAGIC: proof-ignore-for-undo-count @defvar proof-ignore-for-undo-count Matcher for script commands to be ignored in undo count.@* May be left as nil, in which case it will be set to @samp{@code{proof-non-undoables-regexp}}. Used in default function @samp{@code{proof-generic-count-undos}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-count-undos-fn @defvar proof-count-undos-fn Function to calculate a command to issue undos to reach a target span.@* The function takes a span as an argument, and should return a string which is the command to undo to the target span. The target is guaranteed to be within the current (open) proof. This is an important function for script management. The default setting @samp{@code{proof-generic-count-undos}} is based on the settings @samp{@code{proof-non-undoables-regexp}} and @samp{@code{proof-non-undoables-regexp}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-generic-count-undos @defun proof-generic-count-undos span Count number of undos in a span, return command needed to undo that far.@* Command is set using @samp{@code{proof-undo-n-times-cmd}}. A default value for @samp{@code{proof-count-undos-fn}}. For this function to work properly, you must configure @samp{@code{proof-undo-n-times-cmd}} and @samp{@code{proof-ignore-for-undo-count}}. @end defun @c TEXI DOCSTRING MAGIC: proof-find-and-forget-fn @defvar proof-find-and-forget-fn Function that returns a command to forget back to before its argument span.@* This setting is used to for retraction (undoing) in proof scripts. It should undo the effect of all settings between its target span up to (@code{proof-locked-end}). This may involve forgetting a number of definitions, declarations, or whatever. The special string @code{proof-no-command} means there is nothing to do. Important: the generic implementation @samp{@code{proof-generic-find-and-forget}} does nothing, it always returns @samp{@code{proof-no-command}}. This is an important function for script management. Study one of the existing instantiations for examples of how to write it, or leave it set to the default function @samp{@code{proof-generic-find-and-forget}} (which see). @end defvar @c TEXI DOCSTRING MAGIC: proof-generic-find-and-forget @defun proof-generic-find-and-forget span Calculate a forget/undo command to forget back to @var{span}.@* This is a long-range forget: we know that there is no open goal at the moment, so forgetting involves unbinding declarations, etc, rather than undoing proof steps. Currently this has a trivial implementation: it just returns @code{proof-no-command}, meaning @samp{do nothing}. Check the @code{lego-find-and-forget} or @code{coq-find-and-forget} functions for examples of how to write this function. @end defun @c TEXI DOCSTRING MAGIC: proof-goal-hyp-fn @defvar proof-goal-hyp-fn Function which returns cons cell if point is at a goal/hypothesis.@* This is used to parse the proofstate output to mark it up for proof-by-pointing. It should return a cons or nil. First element of the cons is a symbol, @code{'goal'} or @code{'hyp'}. The second element is a string: the goal or hypothesis itself. If you leave this variable unset, no proof-by-pointing markup will be attempted. @end defvar @c TEXI DOCSTRING MAGIC: proof-kill-goal-command @defvar proof-kill-goal-command Command to kill the currently open goal.@* You must set this (perhaps to a no-op) for script management to work. @end defvar @node Nested proofs @section Nested proofs Proof General doesn't yet have a flexible understanding of nested proofs, but can do something with them. @c TEXI DOCSTRING MAGIC: proof-global-p @defvar proof-global-p Whether a command is a global declaration. Predicate on strings or nil.@* This is used to handle nested goals allowed by some provers, by recognizing global declarations as candidates for rearranging the proof script. May be left as nil to disable this function. @end defvar @c TEXI DOCSTRING MAGIC: proof-lift-global @defvar proof-lift-global Function which lifts local lemmas from inside goals out to top level.@* This function takes the local goalsave span as an argument. Leave this set this at @samp{nil} if the proof assistant does not support nested goals, or if you don't want to write a function to do move them around. @end defvar @node Safe (state-preserving) commands @section Safe (state-preserving) commands A proof command is "safe" if it can be issued away from the proof script. For this to work it should be state-preserving in the proof assistant. @c TEXI DOCSTRING MAGIC: proof-state-preserving-p @defvar proof-state-preserving-p A predicate, non-nil if its argument (a command) preserves the proof state.@* If set, used by @code{proof-minibuffer-cmd} to filter out scripting commands which should be entered directly into the script itself. The default setting for this function, @samp{@code{proof-generic-state-preserving-p}} tests by negating the match on @samp{@code{proof-non-undoables-regexp}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-generic-state-preserving-p @defun proof-generic-state-preserving-p cmd Is @var{cmd} state preserving? Match on @code{proof-non-undoables-regexp}. @end defun @node Activate scripting hook @section Activate scripting hook @c TEXI DOCSTRING MAGIC: proof-activate-scripting-hook @defvar proof-activate-scripting-hook Hook run when a buffer is switched into scripting mode.@* The current buffer will be the newly active scripting buffer. This hook may be useful for synchronizing with the proof assistant, for example, to switch to a new theory (in case that isn't already done by commands in the proof script). When functions in this hook are called, the variable @samp{activated-interactively} will be non-nil if @code{proof-activate-scripting} was called interactively (rather than as a side-effect of some other action). If a hook function sends commands to the proof process, it should wait for them to complete (so the queue is cleared for scripting commands), unless activated-interactively is set. @end defvar @node Automatic multiple files @section Automatic multiple files @xref{Handling multiple files}, for more details about this setting. @c TEXI DOCSTRING MAGIC: proof-auto-multiple-files @defvar proof-auto-multiple-files Whether to use automatic multiple file management.@* If non-nil, Proof General will automatically retract a script file whenever another one is retracted which it depends on. It assumes a simple linear dependency between files in the order which they were processed. If your proof assistant has no management of file dependencies, or one which depends on a simple linear context, you may be able to use this setting to good effect. If the proof assistant has more complex file dependencies then you should configure it to communicate with Proof General about the dependencies rather than using this setting. @end defvar @node Completions @section Completions Proof General allows provers to create a @i{completion table} to help writing identifiers in proof scripts. This is documented in the main @i{Proof General} user manual but summarized here for (a different kind of) completion. Completions are filled in according to what has been recently typed, from a database of symbols. The database is automatically saved at the end of a session. Completion is usually a hand-wavy thing, so we don't make any attempt to maintain a precise completion table or anything. The completion table maintained by @file{complete.el} is initialized from @code{PA-completion-table} when @file{proof-script.el} is loaded. This is done with the function @code{proof-add-completions} which you may want to call at other times. @c TEXI DOCSTRING MAGIC: PA-completion-table @defvar PA-completion-table List of identifiers to use for completion for this proof assistant.@* Completion is activated with C-return. If this table is empty or needs adjusting, please make changes using @samp{@code{customize-variable}} and send suggestions to proofgen@@dcs.ed.ac.uk. @end defvar @c TEXI DOCSTRING MAGIC: proof-add-completions @deffn Command proof-add-completions Add completions from -completion-table to completion database.@* Uses @samp{@code{add-completion}} with a negative number of uses and ancient last use time, to discourage saving these into the users database. @end deffn @node Proof shell settings @chapter Proof shell settings The variables in this chapter concern the proof shell mode, and are the largest group. They are split into several subgroups. The first subgroup are commands invoked at various points. The second subgroup of variables are concerned with matching the output from the proof assistant. The final subgroup contains various hooks which you can set to add lisp customization to Proof General in various points (some of them are also used internally for behaviour you may wish to adjust). Variables for configuring the proof shell are put into the customize group @code{proof-shell}. These should be set in the shell mode configuration, before @code{proof-shell-config-done} is called. To understand the way the proof assistant runs inside Emacs, you may want to refer to the @code{comint.el} (Command interpreter) package distributed with Emacs. This package controls several shell-like modes available in Emacs, including the @code{proof-shell-mode} and all specific shell modes derived from it. @menu * Proof shell commands:: * Script input to the shell:: * Settings for matching various output from proof process:: * Settings for matching urgent messages from proof process:: * Hooks and other settings:: @end menu @node Proof shell commands @section Commands Settings in this section configure Proof General with commands to send to the prover to activate certain actions. @c TEXI DOCSTRING MAGIC: proof-prog-name @defvar proof-prog-name System command to run the proof assistant in the proof shell.@* Suggestion: this can be set in @code{proof-pre-shell-start-hook} from a variable which is in the proof assistant's customization group. This allows different proof assistants to coexist (albeit in separate Emacs sessions). @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-auto-terminate-commands @defvar proof-shell-auto-terminate-commands Non-nil if Proof General should try to add terminator to every command.@* If non-nil, whenever a command is sent to the prover using @samp{@code{proof-shell-invisible-command}}, Proof General will check to see if it ends with @code{proof-terminal-char}, and add it if not. If @code{proof-terminal-char} is nil, this has no effect. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-pre-sync-init-cmd @defvar proof-shell-pre-sync-init-cmd The command for configuring the proof process to gain synchronization.@* This command is sent before Proof General's synchronization mechanism is engaged, to allow customization inside the process to help gain syncrhonization (e.g. engaging special markup). It is better to configure the proof assistant for this purpose via command line options if possible, in which case this variable does not need to be set. See also @samp{@code{proof-shell-init-cmd}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-init-cmd @defvar proof-shell-init-cmd The command for initially configuring the proof process.@* This command is sent to the process as soon as syncrhonization is gained (when an annotated prompt is first recognized). It can be used to configure the proof assistant in some way, or print a welcome message (since output before the first prompt is discarded). See also @samp{@code{proof-shell-pre-sync-init-cmd}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-restart-cmd @defvar proof-shell-restart-cmd A command for re-initialising the proof process. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-quit-cmd @defvar proof-shell-quit-cmd A command to quit the proof process. If nil, send EOF instead. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-quit-timeout @defvar proof-shell-quit-timeout The number of seconds to wait after sending @code{proof-shell-quit-cmd}.@* After this timeout, the proof shell will be killed off more rudely. If your proof assistant takes a long time to clean up (for example writing persistent databases out or the like), you may need to bump up this value. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-cd-cmd @defvar proof-shell-cd-cmd Command to the proof assistant to change the working directory.@* The format character @samp{%s} is replaced with the directory, and the escape sequences in @samp{@code{proof-shell-filename-escapes}} are applied to the filename. This setting is used to define the function @code{proof-cd} which changes to the value of (@code{default-directory}) for script buffers. For files, the value of (@code{default-directory}) is simply the directory the file resides in. NB: By default, @code{proof-cd} is called from @code{proof-activate-scripting-hook}, so that the prover switches to the directory of a proof script every time scripting begins. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-start-silent-cmd @defvar proof-shell-start-silent-cmd Command to turn prover goals output off when sending many script commands.@* If non-nil, Proof General will automatically issue this command to help speed up processing of long proof scripts. See also @code{proof-shell-stop-silent-cmd}. NB: terminator not added to command. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-stop-silent-cmd @defvar proof-shell-stop-silent-cmd Command to turn prover output off. @* If non-nil, Proof General will automatically issue this command to help speed up processing of long proof scripts. See also @code{proof-shell-start-silent-cmd}. NB: Terminator not added to command. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-silent-threshold @defvar proof-shell-silent-threshold Number of waiting commands in the proof queue needed to trigger silent mode.@* Default is 2, but you can raise this in case switching silent mode on or off is particularly expensive (or make it ridiculously large to disable silent mode altogether). @end defvar @xref{Handling multiple files}, for more details about the final two settings in this group, @c TEXI DOCSTRING MAGIC: proof-shell-inform-file-processed-cmd @defvar proof-shell-inform-file-processed-cmd Command to the proof assistant to tell it that a file has been processed.@* The format character @samp{%s} is replaced by a complete filename for a script file which has been fully processed interactively with Proof General. See @samp{@code{proof-format-filename}} for other possibilities to process the filename. This setting used to interface with the proof assistant's internal management of multiple files, so the proof assistant is kept aware of which files have been processed. Specifically, when scripting is deactivated in a completed buffer, it is added to Proof General's list of processed files, and the prover is told about it by issuing this command. If this is set to nil, no command is issued. See also: @code{proof-shell-inform-file-retracted-cmd}, @code{proof-shell-process-file}, @code{proof-shell-compute-new-files-list}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-inform-file-retracted-cmd @defvar proof-shell-inform-file-retracted-cmd Command to the proof assistant to tell it that a file has been retracted.@* The format character @samp{%s} is replaced by a complete filename for a script file which Proof General wants the prover to consider as not completely processed. See @samp{@code{proof-format-filename}} for other possibilities to process the filename. This is used to interface with the proof assistant's internal management of multiple files, so the proof assistant is kept aware of which files have been processed. Specifically, when scripting is activated, the file is removed from Proof General's list of processed files, and the prover is told about it by issuing this command. The action may cause the prover in turn to suggest to Proof General that files depending on this one are also unlocked. If this is set to nil, no command is issued. See also: @code{proof-shell-inform-file-processed-cmd}, @code{proof-shell-process-file}, @code{proof-shell-compute-new-files-list}. @end defvar @node Script input to the shell @section Script input to the shell Generally, commands from the proof script are sent verbatim to the proof process running in the proof shell. For historical reasons, carriage returns are stripped by default. You can set @code{proof-shell-strip-crs-from-input} to adjust that. For more sophisticated pre-processing of the sent string, you may like to set @code{proof-shell-insert-hook}. @c TEXI DOCSTRING MAGIC: proof-shell-strip-crs-from-input @defvar proof-shell-strip-crs-from-input If non-nil, replace carriage returns in every input with spaces.@* This is enabled by default: it is appropriate for some systems because several CR's can result in several prompts, which may mess up the display (or even worse, the synchronization). @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-insert-hook @defvar proof-shell-insert-hook Hooks run by @code{proof-shell-insert} before inserting a command.@* Can be used to configure the proof assistant to the interface in various ways -- for example, to observe or alter the commands sent to the prover, or to sneak in extra commands to configure the prover. This hook is called inside a @code{save-excursion} with the @code{proof-shell-buffer} current, just before inserting and sending the text in the variable @samp{string}. The hook can massage @samp{string} or insert additional text directly into the @code{proof-shell-buffer}. Before sending @samp{string}, it will be stripped of carriage returns. Additionally, the hook can examine the variable @samp{action}. It will be a symbol, set to the callback command which is executed in the proof shell filter once @samp{string} has been processed. The @samp{action} variable suggests what class of command is about to be inserted: @lisp @code{'proof-done-invisible} A non-scripting command @code{'proof-done-advancing} A "forward" scripting command @code{'proof-done-retracting} A "backward" scripting command @end lisp Caveats: You should be very careful about setting this hook. Proof General relies on a careful synchronization with the process between inputs and outputs. It expects to see a prompt for each input it sends from the queue. If you add extra input here and it causes more prompts than expected, things will break! Extending the variable @samp{string} may be safer than inserting text directly, since it is stripped of carriage returns before being sent. Example uses: @var{lego} uses this hook for setting the pretty printer width if the window width has changed; Plastic uses it to remove literate-style markup from @samp{string}. The x-symbol support uses this hook to convert special characters into tokens for the proof assistant. @end defvar @node Settings for matching various output from proof process @section Settings for matching various output from proof process @c TEXI DOCSTRING MAGIC: proof-shell-wakeup-char @defvar proof-shell-wakeup-char A special character which terminates an annotated prompt.@* Set to nil if proof assistant does not support annotated prompts. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-first-special-char @defvar proof-shell-first-special-char First special character.@* Codes above this character can have special meaning to Proof General, and are stripped from the prover's output strings. Leave unset if no special characters are being used. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-prompt-pattern @defvar proof-shell-prompt-pattern Proof shell's value for comint-prompt-pattern, which see.@* This pattern is just for interaction in comint (shell buffer). You don't really need to set it. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-annotated-prompt-regexp @defvar proof-shell-annotated-prompt-regexp Regexp matching a (possibly annotated) prompt pattern.@* Output is grabbed between pairs of lines matching this regexp. To help matching you may be able to annotate the proof assistant prompt with a special character not appearing in ordinary output. The special character should appear in this regexp, and should be the value of @code{proof-shell-wakeup-char}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-abort-goal-regexp @defvar proof-shell-abort-goal-regexp Regexp matching output from an aborted proof. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-error-regexp @defvar proof-shell-error-regexp Regexp matching an error report from the proof assistant. We assume that an error message corresponds to a failure in the last proof command executed. So don't match mere warning messages with this regexp. Moreover, an error message should not be matched as an eager annotation (see @code{proof-shell-eager-annotation-start}) otherwise it will be lost. Error messages are considered to begin from @code{proof-shell-error-regexp} and continue until the next prompt. The engine matches interrupts before errors, see @code{proof-shell-interrupt-regexp}. It is safe to leave this variable unset (as nil). @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-interrupt-regexp @defvar proof-shell-interrupt-regexp Regexp matching output indicating the assistant was interrupted.@* We assume that an interrupt message corresponds to a failure in the last proof command executed. So don't match mere warning messages with this regexp. Moreover, an interrupt message should not be matched as an eager annotation (see @code{proof-shell-eager-annotation-start}) otherwise it will be lost. The engine matches interrupts before errors, see @code{proof-shell-error-regexp}. It is safe to leave this variable unset (as nil). @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-proof-completed-regexp @defvar proof-shell-proof-completed-regexp Regexp matching output indicating a finished proof. When output which matches this regexp is seen, we clear the goals buffer in case this is not also marked up as a @samp{goals} type of message. We also enable the QED function (save a proof) and will automatically close off the proof region if another goal appears before a save command. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-start-goals-regexp @defvar proof-shell-start-goals-regexp Regexp matching the start of the proof state output.@* This is an important setting. Output between @samp{@code{proof-shell-start-goals-regexp}} and @samp{@code{proof-shell-end-goals-regexp}} will be pasted into the goals buffer and possibly analysed further for proof-by-pointing markup. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-end-goals-regexp @defvar proof-shell-end-goals-regexp Regexp matching the end of the proof state output, or nil.@* If nil, just use the rest of the output following @code{proof-shell-start-goals-regexp}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-assumption-regexp @defvar proof-shell-assumption-regexp A regular expression matching the name of assumptions. At the moment, this setting is not used in the generic Proof General. In the future it will be used for a generic implementation for @samp{@code{proof-goal-hyp-fn}}, used to help parse the goals buffer to annotate it for proof by pointing. @end defvar @node Settings for matching urgent messages from proof process @section Settings for matching urgent messages from proof process Among the various dialogue messages that the proof assistant outputs during proof, Proof General can consider certain messages to be "urgent". When processing many lines of a proof, Proof General will normally supress the output, waiting until the final message appears before displaying anything to the user. Urgent messages escape this: typically they include messages that the prover wants the user to notice, for example, perhaps, file loading messages, or timing statistics. So that Proof General notices, these urgent messages should be marked-up with "eager" annotations. @c TEXI DOCSTRING MAGIC: proof-shell-eager-annotation-start @defvar proof-shell-eager-annotation-start Eager annotation field start. A regular expression or nil.@* An eager annotation indicates to Proof General that some following output should be displayed (or processed) immediately and not accumulated for parsing later. It is nice to recognize (starts of) warnings or file-reading messages with this regexp. You must also recognize any special messages from the prover to PG with this regexp (e.g. @samp{@code{proof-shell-clear-goals-regexp}}, @samp{@code{proof-shell-retract-files-regexp}}, etc.) See also @samp{@code{proof-shell-eager-annotation-start-length}}, @samp{@code{proof-shell-eager-annotation-end}}. Set to nil to disable this feature. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-eager-annotation-start-length @defvar proof-shell-eager-annotation-start-length Maximum length of an eager annotation start. @* Must be set to the maximum length of the text that may match @samp{@code{proof-shell-eager-annotation-start}} (at least 1). If this value is too low, eager annotations may be lost! This value is used internally by Proof General to optimize the process filter to avoid unnecessary searching. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-eager-annotation-end @defvar proof-shell-eager-annotation-end Eager annotation field end. A regular expression or nil.@* An eager annotation indicates to Emacs that some following output should be displayed or processed immediately. See also @samp{@code{proof-shell-eager-annotation-start}}. It is nice to recognize (ends of) warnings or file-reading messages with this regexp. You must also recognize (ends of) any special messages from the prover to PG with this regexp (e.g. @samp{@code{proof-shell-clear-goals-regexp}}, @samp{@code{proof-shell-retract-files-regexp}}, etc.) The default value is "\n" to match up to the end of the line. @end defvar The default action for urgent messages is to display them in the response buffer, highlighted. But we also allow for some control messages, issued from the proof assistant to Proof General and not intended for the user to see. These are recognized in the same way as urgent messages (marked with eager annotations), so they will be acted on as soon as they are issued by the prover. @c TEXI DOCSTRING MAGIC: proof-shell-clear-response-regexp @defvar proof-shell-clear-response-regexp Regexp matching output telling Proof General to clear the response buffer.@* This feature is useful to give the prover more control over what output is shown to the user. Set to nil to disable. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-clear-goals-regexp @defvar proof-shell-clear-goals-regexp Regexp matching output telling Proof General to clear the goals buffer.@* This feature is useful to give the prover more control over what output is shown to the user. Set to nil to disable. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-set-elisp-variable-regexp @defvar proof-shell-set-elisp-variable-regexp Regexp matching output telling Proof General to set some variable.@* This allows the proof assistant to configure Proof General directly and dynamically. If the regexp matches output from the proof assistant, there should be two match strings: (@code{match-string} 1) should be the name of the elisp variable to be set, and (@code{match-string} 2) should be the value of the variable (which will be evaluated as a lisp expression). A good markup for the second string is to delimit with #'s, since these are not valid syntax for elisp evaluation. Elisp errors will be trapped when evaluating; set @code{proof-show-debug-messages} to be informed when this happens. Example uses are to adjust PG's internal copies of proof assistant's settings, or to make automatic dynamic syntax adjustments in Emacs to match changes in theory, etc. If you pick a dummy variable name (e.g. @samp{proof-dummy-setting}) you can just evaluation arbitrary elisp expressions for their side effects, to adjust menu entries, or even launch auxiliary programs. But use with care -- there is no protection against catastrophic elisp! This setting could also be used to move some configuration settings from PG to the prover, but this is not really supported (most settings must be made before this mechanism will work). In future, the PG standard protocol, @var{pgip}, will use this mechanism for making all settings. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-theorem-dependency-list-regexp @defvar proof-shell-theorem-dependency-list-regexp Regexp matching output telling Proof General what the dependencies are. @* This is so that the dependent theorems can be highlighted somehow. Set to nil to disable. This is an experimental feature, currently work-in-progress. @end defvar Two important control messages are recognized by @code{proof-shell-process-file} and @code{proof-shell-retract-files-regexp}, used for synchronizing Proof General with a file loading mechanism built into the proof assistant. @xref{Handling multiple files}, for more details about how to use the final three settings described here. @vindex proof-included-files-list @c TEXI DOCSTRING MAGIC: proof-shell-process-file @defvar proof-shell-process-file A pair (@var{regexp} . @var{function}) to match a processed file name. If @var{regexp} matches output, then the function @var{function} is invoked on the output string chunk. It must return the name of a script file (with complete path) that the system has successfully processed. In practice, @var{function} is likely to inspect the match data. If it returns the empty string, the file name of the scripting buffer is used instead. If it returns nil, no action is taken. Care has to be taken in case the prover only reports on compiled versions of files it is processing. In this case, @var{function} needs to reconstruct the corresponding script file name. The new (true) file name is added to the front of @samp{@code{proof-included-files-list}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-retract-files-regexp @defvar proof-shell-retract-files-regexp Matches a message that the prover has retracted a file. At this stage, Proof General's view of the processed files is out of date and needs to be updated with the help of the function @samp{@code{proof-shell-compute-new-files-list}}. @end defvar @vindex proof-included-files-list @c TEXI DOCSTRING MAGIC: proof-shell-compute-new-files-list @defvar proof-shell-compute-new-files-list Function to update @samp{proof-included-files list}. It needs to return an up to date list of all processed files. Its output is stored in @samp{@code{proof-included-files-list}}. Its input is the string of which @samp{@code{proof-shell-retract-files-regexp}} matched a substring. In practice, this function is likely to inspect the previous (global) variable @samp{@code{proof-included-files-list}} and the match data triggered by @samp{@code{proof-shell-retract-files-regexp}}. @end defvar @node Hooks and other settings @section Hooks and other settings @c TEXI DOCSTRING MAGIC: proof-shell-filename-escapes @defvar proof-shell-filename-escapes A list of escapes that are applied to %s for filenames.@* A list of cons cells, car of which is string to be replaced by the cdr. For example, when directories are sent to Isabelle, HOL, and Coq, they appear inside ML strings and the backslash character and quote characters must be escaped. The setting @lisp '(("@var{\\\\}" . "@var{\\\\}") ("\"" . "\\\"")) @end lisp achieves this. This does not apply to @var{lego}, which does not need backslash escapes and does not allow filenames with quote characters. This setting is used inside the function @samp{@code{proof-format-filename}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-process-connection-type @defvar proof-shell-process-connection-type The value of @code{process-connection-type} for the proof shell.@* Set non-nil for ptys, nil for pipes. The default (and preferred) option is to use pty communication. However there is a long-standing backslash/long line problem with Solaris which gives a mess of ^G characters when some input is sent which has a in the 256th position. So we select pipes by default if it seems like we're on Solaris. We do not force pipes everywhere because this risks loss of data. @end defvar @c TEXI DOCSTRING MAGIC: proof-pre-shell-start-hook @defvar proof-pre-shell-start-hook Hooks run before proof shell is started.@* Suggestion: set this to a function which configures just these proof shell variables: @lisp @code{proof-prog-name} @code{proof-mode-for-shell} @code{proof-mode-for-response} @code{proof-mode-for-goals} @end lisp This is the bare minimum needed to get a shell buffer and its friends configured in the function @code{proof-shell-start}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-handle-error-or-interrupt-hook @defvar proof-shell-handle-error-or-interrupt-hook Run after an error or interrupt has been reported in the response buffer.@* Hook functions may inspect @samp{@code{proof-shell-error-or-interrupt-seen}} to determine whether the cause was an error or interrupt. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-pre-interrupt-hook @defvar proof-shell-pre-interrupt-hook Run immediately after @samp{@code{comint-interrupt-subjob}} is called.@* This hook is added to allow customization for Poly/ML and other systems where the system queries the user before returning to the top level. For Poly/ML it can be used to send the string "f", for example. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-process-output-system-specific @defvar proof-shell-process-output-system-specific Set this variable to handle system specific output.@* Errors, start of proofs, abortions of proofs and completions of proofs are recognised in the function @samp{@code{proof-shell-process-output}}. All other output from the proof engine is simply reported to the user in the @var{response} buffer. To catch further special cases, set this variable to a pair of functions '(condf . actf). Both are given (cmd string) as arguments. @samp{cmd} is a string containing the currently processed command. @samp{string} is the response from the proof system. To change the behaviour of @samp{@code{proof-shell-process-output}}, (condf cmd string) must return a non-nil value. Then (actf cmd string) is invoked. See the documentation of @samp{@code{proof-shell-process-output}} for the required output format. @end defvar @node Goals buffer settings @chapter Goals buffer settings The goals buffer settings allow configuration of Proof General for proof by pointing or similar features. @c At the moment these settings are disabled. @c TEXI DOCSTRING MAGIC: pbp-change-goal @defvar pbp-change-goal Command to change to the goal @samp{%s} @end defvar @c TEXI DOCSTRING MAGIC: pbp-goal-command @defvar pbp-goal-command Command informing the prover that @samp{@code{pbp-button-action}} has been@* requested on a goal. @end defvar @c TEXI DOCSTRING MAGIC: pbp-hyp-command @defvar pbp-hyp-command Command informing the prover that @samp{@code{pbp-button-action}} has been@* requested on an assumption. @end defvar @c TEXI DOCSTRING MAGIC: pbp-error-regexp @defvar pbp-error-regexp Regexp indicating that the proof process has identified an error. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-result-start @defvar proof-shell-result-start Regexp matching start of an output from the prover after pbp commands.@* In particular, after a @samp{@code{pbp-goal-command}} or a @samp{@code{pbp-hyp-command}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-result-end @defvar proof-shell-result-end Regexp matching end of output from the prover after pbp commands.@* In particular, after a @samp{@code{pbp-goal-command}} or a @samp{@code{pbp-hyp-command}}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-start-char @defvar proof-shell-start-char Starting special for a subterm markup.@* Subsequent characters with values @strong{below} @code{proof-shell-first-special-char} are assumed to be subterm position indicators. Subterm markups should be finished with @code{proof-shell-end-char}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-end-char @defvar proof-shell-end-char Finishing special for a subterm markup.@* See documentation of @code{proof-shell-start-char}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-goal-char @defvar proof-shell-goal-char Mark for goal. This setting is also used to see if proof-by-pointing features are configured. If it is unset, some of the code for parsing the prover output is disabled. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-field-char @defvar proof-shell-field-char Annotated field end @end defvar @node Splash screen settings @chapter Splash screen settings The splash screen can be configured, in a rather limited way. @c TEXI DOCSTRING MAGIC: proof-splash-time @defvar proof-splash-time Minimum number of seconds to display splash screen for.@* The splash screen may be displayed for a couple of seconds longer than this, depending on how long it takes the machine to initialise Proof General. @end defvar @c TEXI DOCSTRING MAGIC: proof-splash-contents @defvar proof-splash-contents Evaluated to configure splash screen displayed when entering Proof General.@* A list of the screen contents. If an element is a string or an image specifier, it is displayed centred on the window on its own line. If it is nil, a new line is inserted. @end defvar @c TEXI DOCSTRING MAGIC: proof-splash-extensions @defvar proof-splash-extensions Prover specific extensions of splash screen.@* These are evaluated and appended to @samp{@code{proof-splash-contents}}. @end defvar @node Global constants @chapter Global constants The settings here are internal constants used by Proof General. You don't need to configure these for your proof assistant unless you want to modify or extend the defaults. @c TEXI DOCSTRING MAGIC: proof-general-name @defvar proof-general-name Proof General name used internally and in menu titles. @end defvar @c TEXI DOCSTRING MAGIC: proof-general-home-page @defopt proof-general-home-page Web address for Proof General The default value is @code{"http://www.proofgeneral.org"}. @end defopt @c TEXI DOCSTRING MAGIC: proof-universal-keys @defvar proof-universal-keys List of key-bindings made for the script, goals and response buffer. @* Elements of the list are tuples @samp{(k . f)} where @samp{k} is a @code{key-binding} (vector) and @samp{f} the designated function. @end defvar @node Handling multiple files @chapter Handling multiple files @cindex Multiple files Large proof developments are typically spread across multiple files. Many provers support such developments by keeping track of dependencies and automatically processing scripts. Proof General supports this mechanism. The user's point of view is considered in the user manual. Here, we describe the more technical nitty gritty. This is what you need to know when you customise another proof assistant to work with Proof General. Documentation for the configuration settings mentioned here appears in the previous sections, this section is intended to help explain the use of those settings. Proof General maintains a list @code{proof-included-files-list} of files which it thinks have been processed by the proof assistant. When a file which is on this list is visited in Emacs, it will be coloured entirely blue to indicate that it has been processed. No editing of the file will be allowed (unless @code{proof-strict-read-only} allows it). @c TEXI DOCSTRING MAGIC: proof-included-files-list @defvar proof-included-files-list List of files currently included in proof process.@* This list contains files in canonical truename format (see @samp{@code{file-truename}}). Whenever a new file is being processed, it gets added to this list via the @code{proof-shell-process-file} configuration settings. When the prover retracts a file, this list is resynchronised via the @code{proof-shell-retract-files-regexp} and @code{proof-shell-compute-new-files-list} configuration settings. Only files which have been @strong{fully} processed should be included here. Proof General itself will automatically add the filenames of a script buffer which has been completely read when scripting is deactivated. It will automatically remove the filename of a script buffer which is completely unread when scripting is deactivated. NB: Currently there is no generic provision for removing files which are only partly read-in due to an error, so ideally the proof assistant should only output a processed message when a file has been successfully read. @end defvar The way that @code{proof-included-files-list} is maintained is the key to multiple file management. (But you should not set this variable directly, it is managed via the configuration settings). @vindex proof-shell-process-file @vindex proof-shell-retract-files-regexp @vindex proof-shell-compute-new-files-list There is a range of strategies for managing multiple files. Ideally, file dependencies should be managed by the proof assistant. Proof General will use the prover's low-level commands to process a whole file and its requirements non-interactively, without going through script management. So that the user knows which files have been processed, the proof assistant should issue messages which Proof General can recognize (``file @code{foo} has been processed'') --- see @code{proof-shell-process-file}. When the user wants to edit a file which has been processed, the file must be retracted (unlocked). The proof assistant should provide a command corresponding to this action, which undoes a given file and all its dependencies. As each file is undone, a message should be issued which Proof General can recognize (``file @code{foo} has been undone'') -- see @code{proof-shell-retract-files-regexp}. (The function @code{proof-shell-compute-new-files-list} should be set to calculate the new value for @code{proof-included-files-list} after a retract message has been seen). @c The key idea is that we leave it to the specific proof assistant to @c worry about managing multiple files, as far as possible. Whenever the @c proof assistant processes or retracts a file it must clearly say so, so @c that Proof General can register this. As well as this communication from the assistant to Proof General about processed or retracted files, Proof General can communicate the other way: it will tell the proof assistant when it has processed or retracted a file via script management. This is because during script management, the proof assistant may not be aware that it is actually dealing with a file of proof commands (rather than just terminal input). Proof General will provide this information in two special instances. First, when scripting is turned off in a file that has been completely processed, Proof General will tell the proof assistant using @code{proof-shell-inform-file-processed-cmd}. Second, when scripting is turned on in a file which is completely processed, Proof General will tell the proof assistant to reconsider: the file should not be considered completely processed yet. This uses the setting @code{proof-shell-inform-file-retracted-cmd}. This second case might lead to a series of messages from the prover telling Proof General to unlock files which depend on the present one, again via @code{proof-shell-retract-files-regexp}. What we have described so far is the ideal case, but it may require some support from the proof assistant to set up (for example, if file-level undo is not normally supported, or the messages during file processing are not suitable). Moreover, some proof assistants may not have file handling with dependencies, or may have a particularly simple case of a linear context: each file depends on all the ones processed before it. Proof General allows you a shortcut to get automatic management of multiple files in these cases by setting the flag @code{proof-auto-multiple-files}. This setting is probably an approximation to the right thing for any proof assistant. More files than necessary will be retracted if the prover has a tree-like file dependency rather than a linear one. @vindex proof-shell-eager-annotation-start @vindex proof-shell-eager-annotation-end Finally, we should mention how Proof General recognizes file processing messages from the proof assistant. Proof General considers @var{output} delimited by the the two regular expressions @code{proof-shell-eager-annotation-start} and @code{proof-shell-eager-annotation-end} as being important. It displays the @var{output} in the Response buffer and analyses the contents further. Among other important messages characterised by these regular expressions (warnings, errors, or information), the prover can tell the interface whenever it processes or retracts a file. To summarize, the settings for multiple file management that may be customized are as follows. To recognize file-processing, @code{proof-shell-process-file}. To recognize messages about file undoing, @code{proof-shell-retract-files-regexp} and @code{proof-shell-compute-new-files-list}. @xref{Settings for matching urgent messages from proof process}. To tell the prover about files handled with script management, use @code{proof-shell-inform-file-processed-cmd} and @code{proof-shell-inform-file-retracted-cmd}. @xref{Proof shell commands}. Finally, set the flag @code{proof-auto-multiple-files} for a automatic approximation to multiple file handling. @xref{Proof script settings}. @node Configuring Font Lock @chapter Configuring Font Lock @cindex font lock Support for Font Lock in Proof General is described in the user manual (see the @i{Syntax highlighting} section). To configure Font Lock for a new proof assistant, you need to set the variable @code{font-lock-keywords} in each of the mode functions you want highlighting for. Proof General will automatically install these settings, and enable Font Lock minor mode (for syntax highlighting as you type) in script buffers. @c nope: too big. TEXI DOCSTRING MAGIC: font-lock-keywords To understand its format, check the documentation of @code{font-lock-keywords} inside Emacs. Proof General has a special hack for simplifying font lock settings @code{proof-font-lock-zap-commas}, but it is recommended to restrict to using the @code{font-lock-keywords} setting if possible. @c TEXI DOCSTRING MAGIC: proof-font-lock-zap-commas @defvar proof-font-lock-zap-commas If non-nil, enable a font-lock hack which unfontifies commas.@* If you fontify variables inside lists like [a,b,c] by matching on the brackets @samp{[} and @samp{]}, you may take objection to the commas being coloured as well. In that case, enable this hack which will magically restore the commas to the default font for you. The hack is rather painful and forces immediate fontification of files on loading (no lazy, caching locking). It is unreliable under FSF Emacs, to boot. @var{lego} and Coq enable it by tradition. @end defvar @node Configuring X-Symbol @chapter Configuring X-Symbol @cindex X-Symbol The X-Symbol package is described in the Proof General user manual. To configure X-Symbol for Proof General, you must understand a little bit of how X-Symbol works: read the documentation that is supplied with it. The basic task is to set up a @i{token language} for your proof assistant. If your assistant is stored in the subdirectory @var{myprover}, the token language will be called @var{myprover} and be defined in a file @file{x-symbol-@var{myprover}.el} which is automatically loaded by X-Symbol. The name of the token language mode will be @code{@var{myprover}sym}. Proof General will check that the file @file{x-symbol-@var{myprover}.el} exists and set up X-Symbol to load it. The token language file must define a number of standard settings, and X-Symbol will give warnings if any of them are missing. Apart from the token language file, there are several settings for X-Symbol which you can set in the usual configuration file @file{@var{myprover}.el}. These settings are optional. @c There's also proof-xsym-font-lock-keywords, but I don't @c really know what this setting is good for. @c TEXI DOCSTRING MAGIC: proof-xsym-activate-command @defvar proof-xsym-activate-command Command to activate token input/output for X-Symbol.@* If non-nil, this command is sent to the proof assistant when X-Symbol support is activated. @end defvar @c TEXI DOCSTRING MAGIC: proof-xsym-deactivate-command @defvar proof-xsym-deactivate-command Command to deactivate token input/output for X-Symbol.@* If non-nil, this command is sent to the proof assistant when X-Symbol support is deactivated. @end defvar We expect tokens to be used uniformly, so that along with each script mode buffer, the response buffer and goals buffer also invoke X-Symbol to display special characters in the same token language. This happens automatically. If you want additional modes to use X-Symbol with the token language for your proof assistant, you can set @code{proof-xsym-extra-modes}. @c TEXI DOCSTRING MAGIC: proof-xsym-extra-modes @defvar proof-xsym-extra-modes List of additional mode names to use X-Symbol with Proof General tokens.@* These modes will have X-Symbol enabled for the proof assistant token language, in addition to the four modes for Proof General (script, shell, response, pbp). Set this variable if you want additional modes to also display tokens (for example, editing documentation or source code files). @end defvar @node Writing more lisp code @chapter Writing more lisp code You may want to add some extra features to your instance of Proof General which are not supported in the generic core. To do this, you can use the settings described above, plus a small number of fundamental functions in Proof General which you can consider as exported in the generic interface. Be careful using more functions than are mentioned here because the internals of Proof General may change between versions. @menu * Default values for generic settings:: * Adding prover-specific configurations:: * Useful variables:: * Useful functions and macros:: @end menu @node Default values for generic settings @section Default values for generic settings Several generic settings are defined using @code{defpgcustom} in @file{proof-config.el}. This introduces settings of the form @code{-name} for each proof assistant @var{PA}. To set the default value for these settings in prover-specific cases, you should use the special @code{defpgdefault} macro: @c TEXI DOCSTRING MAGIC: defpgdefault @deffn Macro defpgdefault Set default for the proof assistant specific variable @var{-sym} to @var{value}.@* This should be used in prover-specific code to alter the default values for prover specific settings. Usage: (defpgdefault SYM @var{value}) @end deffn In your prover-specific code you can simply use the setting @code{-sym} directly, i.e., write @code{myprover-home-page}. In the generic code, you can use a macro, writing @code{(proof-ass home-page)} to refer to the @code{-home-page} setting for the currently running instance of Proof General. @xref{Configuration variable mechanisms}, for more details on this mechanism. @node Adding prover-specific configurations @section Adding prover-specific configurations Apart from the generic settings, your prover instance will probably need some specific customizable settings. Defining new prover-specific settings using customize is pretty easy. You should do it at least for your prover-specific user options. The code in @file{proof-site.el} provides each prover with two customization groups automatically (based on the name of the assistant): @code{} for user options for prover @var{PA} and @code{-config} for configuration of prover @var{PA}. Typically @code{-config} holds settings which are constants but which may be nice to tweak. The first group appears in the menu @lisp ProofGeneral -> Customize -> @end lisp The second group appears in the menu: @lisp ProofGeneral -> Internals -> config @end lisp A typical use of @code{defcustom} looks like this: @lisp (defcustom myprover-search-page "http://findtheorem.myprover.org" "URL of search web page for myprover." :type 'string :group 'myprover-config) @end lisp This introduces a new customizable setting, which you might use to make a menu entry, for example. The default value is the string @code{"http://findtheorem.myprover.org"}. @node Useful variables @section Useful variables In @file{proof-compat}, two architecture flags are defined. These can be used to write conditional pieces of code for different Emacs and operating systems. @c TEXI DOCSTRING MAGIC: proof-running-on-XEmacs @defvar proof-running-on-XEmacs Non-nil if Proof General is running on XEmacs. @end defvar @c TEXI DOCSTRING MAGIC: proof-running-on-win32 @defvar proof-running-on-win32 Non-nil if Proof General is running on a win32 system. @end defvar @node Useful functions and macros @section Useful functions and macros The recommended functions you may invoke are these: @itemize @bullet @item Any of the interactive commands (i.e. anything you can invoke with @kbd{M-x}, including all key-bindings) @item Any of the internal functions and macros mentioned below @end itemize To insert text into the current (usually script) buffer, the function @code{proof-insert} is useful. There's also a handy macro @code{proof-defshortcut} for defining shortcut functions using it. @c TEXI DOCSTRING MAGIC: proof-insert @defun proof-insert text Insert @var{text} into the current buffer.@* @var{text} may include these special characters: @lisp %p - place the point here after input @end lisp Any other %-prefixed character inserts itself. @end defun @c TEXI DOCSTRING MAGIC: proof-defshortcut @deffn Macro proof-defshortcut Define shortcut function FN to insert @var{string}, optional keydef KEY.@* This is intended for defining proof assistant specific functions. @var{string} is inserted using @samp{@code{proof-insert}}, which see. KEY is added onto @code{proof-assistant} map. @end deffn The function @code{proof-shell-invisible-command} is a useful utility for sending a single command to the process. You should use this to implement user-level or internal functions rather than attempting to directly manipulate the proof action list, or insert into the shell buffer. @c TEXI DOCSTRING MAGIC: proof-shell-invisible-command @defun proof-shell-invisible-command cmd &optional wait Send @var{cmd} to the proof process. @* Automatically add @code{proof-terminal-char} if necessary, examining proof-shell-no-auto-terminate-commands. By default, let the command be processed asynchronously. But if optional @var{wait} command is non-nil, wait for processing to finish before and after sending the command. If @var{wait} is an integer, wait for that many seconds afterwards. @end defun There are several handy macros to help you define functions which invoke @code{proof-shell-invisible-command}. @c TEXI DOCSTRING MAGIC: proof-definvisible @deffn Macro proof-definvisible Define function FN to send @var{string} to proof assistant, optional keydef KEY.@* This is intended for defining proof assistant specific functions. @var{string} is sent using @code{proof-shell-invisible-command}, which see. KEY is added onto @code{proof-assistant} map. @end deffn @c TEXI DOCSTRING MAGIC: proof-define-assistant-command @deffn Macro proof-define-assistant-command Define command FN to send string @var{body} to proof assistant, based on @var{cmdvar}.@* @var{body} defaults to @var{cmdvar}, a variable. @end deffn @c TEXI DOCSTRING MAGIC: proof-define-assistant-command-witharg @deffn Macro proof-define-assistant-command-witharg Define command FN to prompt for string @var{cmdvar} to proof assistant.@* @var{cmdvar} is a function or string. Automatically has history. @end deffn @c TEXI DOCSTRING MAGIC: proof-format-filename @defun proof-format-filename string filename Format @var{string} by replacing quoted chars by escaped version of @var{filename}. %e uses the canonicalized expanded version of filename (including directory, using @code{default-directory} -- see @samp{@code{expand-file-name}}). %r uses the unadjusted (possibly relative) version of @var{filename}. %m ('module') uses the basename of the file, without directory or extension. %s means the same as %e. Using %e can avoid problems with dumb proof assistants who don't understand ~, for example. For all these cases, the escapes in @samp{@code{proof-shell-filename-escapes}} are processed. If @var{string} is in fact a function, instead invoke it on @var{filename} and return the resulting (string) value. @end defun @node Internals of Proof General @chapter Internals of Proof General This chapter sketches some of the internal functions and variables of Proof General, to help developers who wish to understand or modify the code. Most of the documentation below is generated automatically from the comments in the code. Because Emacs lisp is interpreted and self-documenting, the best way to find your way around the source is inside Emacs once Proof General is loaded. Read the source files, and use functions such as @kbd{C-h v} and @kbd{C-h f}. The code is split into files. The following sections document the important files, kept in the @file{generic/} subdirectory. @menu * Spans:: * Configuration variable mechanisms:: * Proof General site configuration:: * Global variables:: * Proof script mode:: * Proof shell mode:: * Debugging:: @end menu @node Spans @section Spans @cindex spans @cindex extents @cindex overlays @dfn{Spans} are an abstraction of XEmacs @dfn{extents} used to help bridge the gulf between FSF GNU Emacs and XEmacs. In FSF GNU Emacs, spans are implemented using @dfn{overlays}. See the files @file{span-extent.el} and @file{span-overlay.el} for the implementation of the common interface in each case. @node Proof General site configuration @section Proof General site configuration @cindex installation directories @cindex site configuration The file @file{proof-site.el} contains the initial configuration for Proof General for the site (or user) and the choice of provers. The first part of the configuration is to set @code{proof-home-directory} to the directory that @file{proof-site.el} is located in, or to the variable of the environment variable @code{PROOFGENERAL_HOME} if that is set. @c TEXI DOCSTRING MAGIC: proof-home-directory @defvar proof-home-directory Directory where Proof General is installed. Ends with slash.@* Default value taken from environment variable @samp{PROOFGENERAL_HOME} if set, otherwise based on where the file @samp{proof-site.el} was loaded from. You can use customize to set this variable. @end defvar @c They're no longer options. @c The default value for @code{proof-home-directory} mentioned above is the @c one for the author's system, it won't be the same for you! Further directory variables allow the files of Proof General to be split up and installed across a system if need be, rather than under the @code{proof-home-directory} root. @c TEXI DOCSTRING MAGIC: proof-images-directory @defvar proof-images-directory Where Proof General image files are installed. Ends with slash. @end defvar @c TEXI DOCSTRING MAGIC: proof-info-directory @defvar proof-info-directory Where Proof General Info files are installed. Ends with slash. @end defvar @cindex mode stub After defining these settings, we define a @dfn{mode stub} for each proof assistant enabled. The mode stub will autoload Proof General for the right proof assistant when a file is visited with the corresponding extension. The proof assistants enabled are the ones listed in the @code{proof-assistants} setting. @c TEXI DOCSTRING MAGIC: proof-assistants @defopt proof-assistants Choice of proof assistants to use with Proof General.@* A list of symbols chosen from: @code{'demoisa} @code{'isar} @code{'isa} @code{'lego} @code{'coq} @code{'phox} @code{'hol98} @code{'acl2} @code{'plastic} @code{'twelf}. Each proof assistant defines its own instance of Proof General, providing session control, script management, etc. Proof General will be started automatically for the assistants chosen here. To avoid accidently invoking a proof assistant you don't have, only select the proof assistants you (or your site) may need. You can select which proof assistants you want by setting this variable before @samp{proof-site.el} is loaded, or by setting the environment variable @samp{PROOFGENERAL_ASSISTANTS} to the symbols you want, for example "lego isa". Or you can edit the file @samp{proof-site.el} itself. Note: to change proof assistant, you must start a new Emacs session. The default value is @code{nil}. @end defopt The file @file{proof-site.el} also defines a version variable. @c TEXI DOCSTRING MAGIC: proof-general-version @defvar proof-general-version Version string identifying Proof General release. @end defvar @node Configuration variable mechanisms @section Configuration variable mechanisms @cindex conventions @cindex user options @cindex configuration @cindex settings The file @file{proof-config.el} defines the configuration variables for Proof General, including instantiation parameters and user options. See previous chapters for details of its contents. Here we mention some conventions for declaring user options. Global user options and instantiation parameters are declared using @code{defcustom} as usual. User options should have `@code{*}' as the first character of their docstrings (standard Emacs convention) and live in the customize group @code{proof-user-options}. See @file{proof-config.el} for the groups for instantiation parameters. User options which are generic (having separate instances for each prover) and instantiation parameters (by definition generic) can be declared using the special macro @code{defpgcustom}. It is used in the same way as @code{defcustom}, except that the symbol declared will automatically be prefixed by the current proof assistant symbol. @c TEXI DOCSTRING MAGIC: defpgcustom @deffn Macro defpgcustom Define a new customization variable @var{-sym} for the current proof assistant.@* The function proof-assistant- is also defined, which can be used in the generic portion of Proof General to set and retrieve the value for the current p.a. Arguments as for @samp{defcustom}, which see. Usage: (defpgcustom SYM &rest @var{args}). @end deffn In specific instances of Proof General, the macro @code{defpgdefault} can be used to give a default value for a generic setting. @c TEXI DOCSTRING MAGIC: defpgdefault @deffn Macro defpgdefault Set default for the proof assistant specific variable @var{-sym} to @var{value}.@* This should be used in prover-specific code to alter the default values for prover specific settings. Usage: (defpgdefault SYM @var{value}) @end deffn All new instantiation variables are best declared using the @code{defpgcustom} mechanism (old code may be converted gradually). Customizations which are liable to be different for different instances of Proof General are also best declared in this way. An example is the use of X Symbol, controlled by @code{@emph{PA}-x-symbol-enable}, since it works poorly or not at all with some provers. To access the generic settings, the following four functions and macros are useful. @c TEXI DOCSTRING MAGIC: proof-ass @deffn Macro proof-ass Return the value for SYM for the current prover. @end deffn @c TEXI DOCSTRING MAGIC: proof-ass-sym @deffn Macro proof-ass-sym Return the symbol for SYM for the current prover. SYM not evaluated. @end deffn @c TEXI DOCSTRING MAGIC: proof-ass-symv @defun proof-ass-symv sym Return the symbol for @var{sym} for the current prover. @var{sym} is evaluated. @end defun If changing a user option setting amounts to more than just setting a variable (it may have some dynamic effect), we can set the @code{custom-set} property for the variable to the function @code{proof-set-value} which does an ordinary @code{set-default} to set the variable, and then calls a function with the same name as the variable, to do whatever is necessary according to the new value for the variable. There are several settings which can be switched on or off by the user, which use this @code{proof-set-value} mechanism. They are controlled by boolean variables with names like @code{proof-@var{foo}-enable}, and appear at the start of the customize group @code{proof-user-options}. They should be edited by the user through the customization mechanism, and set in the code using @code{customize-set-variable}. In @code{proof-utils.el} there is a handy macro, @code{proof-deftoggle}, which constructs an interactive function for toggling boolean customize settings. We can use this to make an interactive function @code{proof-@var{foo}-toggle} to put on a menu or bind to a key, for example. This general scheme is followed as far as possible, to give uniform behaviour and appearance for boolean user options, as well as interfacing properly with the @code{customize} mechanism. @c TEXI DOCSTRING MAGIC: proof-set-value @defun proof-set-value sym value Set a customize variable using @code{set-default} and a function.@* We first call @samp{@code{set-default}} to set @var{sym} to @var{value}. Then if there is a function @var{sym} (i.e. with the same name as the variable @var{sym}), it is called to take some dynamic action for the new setting. If there is no function @var{sym}, we try stripping @code{proof-assistant-symbol} and adding "proof-" instead to get a function name. This extends @code{proof-set-value} to work with generic individual settings. The dynamic action call only happens when values @strong{change}: as an approximation we test whether proof-config is fully-loaded yet. @end defun @c TEXI DOCSTRING MAGIC: proof-deftoggle @deffn Macro proof-deftoggle Define a function VAR-toggle for toggling a boolean customize setting VAR.@* The toggle function uses @code{customize-set-variable} to change the variable. @var{othername} gives an alternative name than the default -toggle. The name of the defined function is returned. @end deffn @node Global variables @section Global variables Global variables are defined in @file{proof.el}. The same file defines a few utility functions and some triggers to load in the other files. @c TEXI DOCSTRING MAGIC: proof-script-buffer @defvar proof-script-buffer The currently active scripting buffer or nil if none. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-buffer @defvar proof-shell-buffer Process buffer where the proof assistant is run. @end defvar @c TEXI DOCSTRING MAGIC: proof-response-buffer @defvar proof-response-buffer The response buffer. @end defvar @c TEXI DOCSTRING MAGIC: proof-goals-buffer @defvar proof-goals-buffer The goals buffer. @end defvar @c TEXI DOCSTRING MAGIC: proof-buffer-type @defvar proof-buffer-type Symbol indicating the type of this buffer: @code{'script}, @code{'shell}, @code{'pbp}, or @code{'response}. @end defvar @c TEXI DOCSTRING MAGIC: proof-included-files-list @defvar proof-included-files-list List of files currently included in proof process.@* This list contains files in canonical truename format (see @samp{@code{file-truename}}). Whenever a new file is being processed, it gets added to this list via the @code{proof-shell-process-file} configuration settings. When the prover retracts a file, this list is resynchronised via the @code{proof-shell-retract-files-regexp} and @code{proof-shell-compute-new-files-list} configuration settings. Only files which have been @strong{fully} processed should be included here. Proof General itself will automatically add the filenames of a script buffer which has been completely read when scripting is deactivated. It will automatically remove the filename of a script buffer which is completely unread when scripting is deactivated. NB: Currently there is no generic provision for removing files which are only partly read-in due to an error, so ideally the proof assistant should only output a processed message when a file has been successfully read. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-proof-completed @defvar proof-shell-proof-completed Flag indicating that a completed proof has just been observed.@* If non-nil, the value counts the commands from the last command of the proof (starting from 1). @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-error-or-interrupt-seen @defvar proof-shell-error-or-interrupt-seen Flag indicating that an error or interrupt has just occurred.@* Set to @code{'error} or @code{'interrupt} if one was observed from the proof assistant during the last group of commands. @end defvar @node Proof script mode @section Proof script mode The file @file{proof-script.el} contains the main code for proof script mode, as well as definitions of menus, key-bindings, and user-level functions. Proof scripts have two important variables for the locked and queue regions. These variables are local to each script buffer (although we only really need one queue span in total rather than one per buffer). @c TEXI DOCSTRING MAGIC: proof-locked-span @defvar proof-locked-span The locked span of the buffer.@* Each script buffer has its own locked span, which may be detached from the buffer. Proof General allows buffers in other modes also to be locked; these also have a non-nil value for this variable. @end defvar @c TEXI DOCSTRING MAGIC: proof-queue-span @defvar proof-queue-span The queue span of the buffer. May be detached if inactive or empty. @end defvar Various utility functions manipulate and examine the spans. An important one is @code{proof-init-segmentation}. @c TEXI DOCSTRING MAGIC: proof-init-segmentation @defun proof-init-segmentation Initialise the queue and locked spans in a proof script buffer.@* Allocate spans if need be. The spans are detached from the buffer, so the regions are made empty by this function. @end defun For locking files loaded by a proof assistant, we use the next function. @c TEXI DOCSTRING MAGIC: proof-complete-buffer-atomic @defun proof-complete-buffer-atomic buffer Make sure @var{buffer} is marked as completely processed, completing with a single step. If buffer already contains a locked region, only the remainder of the buffer is closed off atomically. This works for buffers which are not in proof scripting mode too, to allow other files loaded by proof assistants to be marked read-only. @end defun Atomic locking is instigated by the next function, which uses the variables @code{proof-included-files-list} documented earlier (@pxref{Handling multiple files} and @pxref{Global variables}). @c TEXI DOCSTRING MAGIC: proof-register-possibly-new-processed-file @defun proof-register-possibly-new-processed-file file &optional informprover noquestions Register a possibly new @var{file} as having been processed by the prover. If @var{informprover} is non-nil, the proof assistant will be told about this, to co-ordinate with its internal file-management. (Otherwise we assume that it is a message from the proof assistant which triggers this call). In this case, the user will be queried to save some buffers, unless @var{noquestions} is non-nil. No action is taken if the file is already registered. A warning message is issued if the register request came from the proof assistant and Emacs has a modified buffer visiting the file. @end defun An important pair of functions activate and deactivate scripting for the current buffer. A change in the state of active scripting can trigger various actions, such as starting up the proof assistant, or altering @code{proof-included-files-list}. @c TEXI DOCSTRING MAGIC: proof-activate-scripting @deffn Command proof-activate-scripting &optional nosaves queuemode Ready prover and activate scripting for the current script buffer. The current buffer is prepared for scripting. No changes are necessary if it is already in Scripting minor mode. Otherwise, it will become the new active scripting buffer, provided scripting can be switched off in the previous active scripting buffer with @samp{@code{proof-deactivate-scripting}}. Activating a new script buffer may be a good time to ask if the user wants to save some buffers; this is done if the user option @samp{@code{proof-query-file-save-when-activating-scripting}} is set and provided the optional argument @var{nosaves} is non-nil. The optional argument @var{queuemode} relaxes the test for a busy proof shell to allow one which has mode @var{queuemode}. In all other cases, a proof shell busy error is given. Finally, the hooks @samp{@code{proof-activate-scripting-hook}} are run. This can be a useful place to configure the proof assistant for scripting in a particular file, for example, loading the correct theory, or whatever. If the hooks issue commands to the proof assistant (via @samp{@code{proof-shell-invisible-command}}) which result in an error, the activation is considered to have failed and an error is given. @end deffn @c TEXI DOCSTRING MAGIC: proof-deactivate-scripting @deffn Command proof-deactivate-scripting &optional forcedaction Deactivate scripting for the active scripting buffer. Set @code{proof-script-buffer} to nil and turn off the modeline indicator. No action if there is no active scripting buffer. We make sure that the active scripting buffer either has no locked region or a full locked region (everything in it has been processed). If this is not already the case, we question the user whether to retract or assert, or automatically take the action indicated in the user option @samp{@code{proof-auto-action-when-deactivating-scripting}.} If the scripting buffer is (or has become) fully processed, and it is associated with a file, it is registered on @samp{@code{proof-included-files-list}}. Conversely, if it is (or has become) empty, we make sure that it is @strong{not} registered. This is to be certain that the included files list behaves as we might expect with respect to the active scripting buffer, in an attempt to harmonize mixed scripting and file reading in the prover. This function either succeeds, fails because the user refused to process or retract a partly finished buffer, or gives an error message because retraction or processing failed. If this function succeeds, then @code{proof-script-buffer} is nil afterwards. The optional argument @var{forcedaction} overrides the user option @samp{@code{proof-auto-action-when-deactivating-scripting}} and prevents questioning the user. It is used to make a value for the @code{kill-buffer-hook} for scripting buffers, so that when a scripting buffer is killed it is always retracted. @end deffn The function @code{proof-segment-up-to} is the main one used for parsing the proof script buffer. There are several variants of this function available corresponding to different parsing strategies; the appropriate one is aliased to @code{proof-segment-up-to} according to which configuration variables have been set. If only @code{proof-script-command-end-regexp} or @code{proof-terminal-char} are set, then the default is @code{proof-segment-up-to-cmdend}. If @code{proof-script-command-start-regexp} is set, the choice is @code{proof-segment-up-to-cmdstart}. @c TEXI DOCSTRING MAGIC: proof-segment-up-to-cmdend @defun proof-segment-up-to-cmdend pos &optional next-command-end Parse the script buffer from end of locked to @var{pos}.@* Return a list of (type, string, int) tuples. Each tuple denotes the command and the position of its terminator, type is one of @code{'comment}, or @code{'cmd}. @code{'unclosed-comment} may be consed onto the start if the segment finishes with an unclosed comment. If optional @var{next-command-end} is non-nil, we include the command which continues past @var{pos}, if any. This version is used when @samp{@code{proof-script-command-end-regexp}} is set. @end defun @c TEXI DOCSTRING MAGIC: proof-segment-up-to-cmdstart @defun proof-segment-up-to-cmdstart pos &optional next-command-end Parse the script buffer from end of locked to @var{pos}.@* Return a list of (type, string, int) tuples. Each tuple denotes the command and the position of its terminator, type is one of @code{'comment}, or @code{'cmd}. If optional @var{next-command-end} is non-nil, we include the command which continues past @var{pos}, if any. (NOT @var{implemented} IN @var{this} @var{version}). This version is used when @samp{@code{proof-script-command-start-regexp}} is set. @end defun The function @code{proof-semis-to-vanillas} is used to convert a parsed region of the script into a series of commands to be sent to the proof assistant. @c TEXI DOCSTRING MAGIC: proof-semis-to-vanillas @defun proof-semis-to-vanillas semis &optional callback-fn Convert a sequence of terminator positions to a set of vanilla extents.@* Proof terminator positions @var{semis} has the form returned by the function proof-segment-up-to. Set the callback to @var{callback-fn} or @code{'proof-done-advancing} by default. @end defun The function @code{proof-assert-until-point} is the main one used to process commands in the script buffer. It's actually used to implement the assert-until-point, electric terminator keypress, and find-next-terminator behaviours. In different cases we want different things, but usually the information (i.e. are we inside a comment) isn't available until we've actually run @code{proof-segment-up-to (point)}, hence all the different options when we've done so. @c TEXI DOCSTRING MAGIC: proof-assert-until-point @defun proof-assert-until-point &optional unclosed-comment-fun ignore-proof-process-p Process the region from the end of the locked-region until point.@* Default action if inside a comment is just process as far as the start of the comment. If you want something different, put it inside @var{unclosed-comment-fun}. If @var{ignore-proof-process-p} is set, no commands will be added to the queue and the buffer will not be activated for scripting. @end defun @code{proof-assert-next-command} is a variant of this function. @c TEXI DOCSTRING MAGIC: proof-assert-next-command @deffn Command proof-assert-next-command &optional unclosed-comment-fun ignore-proof-process-p dont-move-forward for-new-command Process until the end of the next unprocessed command after point.@* If inside a comment, just process until the start of the comment. If you want something different, put it inside @var{unclosed-comment-fun}. If @var{ignore-proof-process-p} is set, no commands will be added to the queue. Afterwards, move forward to near the next command afterwards, unless @var{dont-move-forward} is non-nil. If @var{for-new-command} is non-nil, a space or newline will be inserted automatically. @end deffn The main command for retracting parts of a script is @code{proof-retract-until-point}. @c TEXI DOCSTRING MAGIC: proof-retract-until-point @defun proof-retract-until-point &optional delete-region Set up the proof process for retracting until point.@* In particular, set a flag for the filter process to call @samp{@code{proof-done-retracting}} after the proof process has successfully reset its state. If @var{delete-region} is non-nil, delete the region in the proof script corresponding to the proof command sequence. If invoked outside a locked region, undo the last successfully processed command. @end defun To clean up when scripting is stopped, a script buffer is killed, or the proof assistant exits, we use the functions @code{proof-restart-buffers} and @code{proof-script-remove-all-spans-and-deactivate}. @c TEXI DOCSTRING MAGIC: proof-restart-buffers @defun proof-restart-buffers buffers Remove all extents in @var{buffers} and maybe reset @samp{@code{proof-script-buffer}}.@* No effect on a buffer which is nil or killed. If one of the buffers is the current scripting buffer, then @code{proof-script-buffer} will deactivated. @end defun @c TEXI DOCSTRING MAGIC: proof-script-remove-all-spans-and-deactivate @defun proof-script-remove-all-spans-and-deactivate Remove all spans from scripting buffers via @code{proof-restart-buffers}. @end defun @c @c SECTION: Proof Shell Mode @c @node Proof shell mode @section Proof shell mode @cindex proof shell mode @cindex comint-mode The proof shell mode code is in the file @file{proof-shell.el}. Proof shell mode is defined to inherit from @code{comint-mode} using @code{define-derived-mode} near the end of the file. The bulk of the code in the file is concerned with sending code to and from the shell, and processing output for the associated buffers (goals and response). Good process handling is a tricky issue. Proof General attempts to manage the process strictly, by maintaining a queue of commands to send to the process. Once a command has been processed, another one is popped off the queue and sent. There are several important internal variables which control interaction with the process. @c TEXI DOCSTRING MAGIC: proof-shell-busy @defvar proof-shell-busy A lock indicating that the proof shell is processing.@* When this is non-nil, @code{proof-shell-ready-prover} will give an error. @end defvar @c TEXI DOCSTRING MAGIC: proof-marker @defvar proof-marker Marker in proof shell buffer pointing to previous command input. @end defvar @c TEXI DOCSTRING MAGIC: proof-action-list @defvar proof-action-list A list of@* @lisp (@var{span} @var{command} @var{action}) @end lisp triples, which is a queue of things to do. See the functions @samp{@code{proof-start-queue}} and @samp{proof-exec-loop}. @end defvar @c TEXI DOCSTRING MAGIC: proof-analyse-using-stack @defvar proof-analyse-using-stack Choice of syntax tree encoding for terms. If nil, prover is expected to make no optimisations. If non-nil, the pretty printer of the prover only reports local changes. For @var{lego} 1.3.1 use @samp{nil}, for Coq 6.2, use @samp{t}. @end defvar The function @code{proof-shell-start} is used to initialise a shell buffer and the associated buffers. @c TEXI DOCSTRING MAGIC: proof-shell-start @deffn Command proof-shell-start Initialise a shell-like buffer for a proof assistant. Also generates goal and response buffers. Does nothing if proof assistant is already running. @end deffn The function @code{proof-shell-kill-function} performs the converse function of shutting things down; it is used as a hook function for @code{kill-buffer-hook}. Then no harm occurs if the user kills the shell directly, or if it is done more cautiously via @code{proof-shell-exit}. The function @code{proof-shell-restart} allows a less drastic way of restarting scripting, other than killing and restarting the process. @c TEXI DOCSTRING MAGIC: proof-shell-kill-function @defun proof-shell-kill-function Function run when a proof-shell buffer is killed.@* Attempt to shut down the proof process nicely and clear up all the locked regions and state variables. Value for @code{kill-buffer-hook} in shell buffer. Also called by @code{proof-shell-bail-out} if the process is exited by hand (or exits by itself). @end defun @c TEXI DOCSTRING MAGIC: proof-shell-exit @deffn Command proof-shell-exit Query the user and exit the proof process. This simply kills the @code{proof-shell-buffer} relying on the hook function @code{proof-shell-kill-function} to do the hard work. @end deffn @c TEXI DOCSTRING MAGIC: proof-shell-bail-out @defun proof-shell-bail-out process event Value for the process sentinel for the proof assistant process.@* If the proof assistant dies, run @code{proof-shell-kill-function} to cleanup and remove the associated buffers. The shell buffer is left around so the user may discover what killed the process. @end defun @c TEXI DOCSTRING MAGIC: proof-shell-restart @deffn Command proof-shell-restart Clear script buffers and send @code{proof-shell-restart-cmd}.@* All locked regions are cleared and the active scripting buffer deactivated. If the proof shell is busy, an interrupt is sent with @code{proof-interrupt-process} and we wait until the process is ready. The restart command should re-synchronize Proof General with the proof assistant, without actually exiting and restarting the proof assistant process. It is up to the proof assistant how much context is cleared: for example, theories already loaded may be "cached" in some way, so that loading them the next time round only performs a re-linking operation, not full re-processing. (One way of caching is via object files, used by Lego and Coq). @end deffn @c @c INPUT @c @subsection Input to the shell Input to the proof shell via the queue region is managed by the functions @code{proof-start-queue} and @code{proof-shell-exec-loop}. @c TEXI DOCSTRING MAGIC: proof-start-queue @defun proof-start-queue start end alist Begin processing a queue of commands in @var{alist}.@* If @var{start} is non-nil, @var{start} and @var{end} are buffer positions in the active scripting buffer for the queue region. This function calls @samp{@code{proof-append-alist}}. @end defun @c TEXI DOCSTRING MAGIC: proof-append-alist @defun proof-append-alist alist &optional queuemode Chop off the vacuous prefix of the command queue @var{alist} and queue it.@* For each @samp{@code{proof-no-command}} item at the head of the list, invoke its callback and remove it from the list. Append the result onto @samp{@code{proof-action-list}}, and if the proof shell isn't already busy, grab the lock with @var{queuemode} and start processing the queue. If the proof shell is busy when this function is called, then @var{queuemode} must match the mode of the queue currently being processed. @end defun @vindex proof-action-list @c TEXI DOCSTRING MAGIC: proof-shell-exec-loop @defun proof-shell-exec-loop Process the @code{proof-action-list}. @samp{@code{proof-action-list}} contains a list of (@var{span} @var{command} @var{action}) triples. If this function is called with a non-empty @code{proof-action-list}, the head of the list is the previously executed command which succeeded. We execute (@var{action} @var{span}) on the first item, then (@var{action} @var{span}) on any following items which have @code{proof-no-command} as their cmd components. If a there is a next command after that, send it to the process. If the action list becomes empty, unlock the process and remove the queue region. The return value is non-nil if the action list is now empty. @end defun Input is actually inserted into the shell buffer and sent to the process by the low-level function @code{proof-shell-insert}. @c TEXI DOCSTRING MAGIC: proof-shell-insert @defun proof-shell-insert string action Insert @var{string} at the end of the proof shell, call @code{comint-send-input}. First call @code{proof-shell-insert-hook}. The argument @var{action} may be examined by the hook to determine how to process the @var{string} variable. Then strip @var{string} of carriage returns before inserting it and updating @code{proof-marker} to point to the end of the newly inserted text. Do not use this function directly, or output will be lost. It is only used in @code{proof-append-alist} when we start processing a queue, and in @code{proof-shell-exec-loop}, to process the next item. @end defun When Proof General is processing a queue of commands, the lock is managed using a couple of utility functions. You should not need to use these directly. @c TEXI DOCSTRING MAGIC: proof-grab-lock @defun proof-grab-lock &optional queuemode Grab the proof shell lock, starting the proof assistant if need be.@* Runs @code{proof-state-change-hook} to notify state change. Clears the @code{proof-shell-error-or-interrupt-seen} flag. If @var{queuemode} is supplied, set the lock to that value. @end defun @c TEXI DOCSTRING MAGIC: proof-release-lock @defun proof-release-lock &optional err-or-int Release the proof shell lock, with error or interrupt flag @var{err-or-int}.@* Clear @code{proof-shell-busy}, and set @code{proof-shell-error-or-interrupt-seen} to err-or-int. @end defun @c @c OUTPUT @c @subsection Output from the shell Two main functions deal with output, @code{proof-shell-process-output} and @code{proof-shell-process-urgent-message}. In effect we consider the output to be two streams intermingled: the "urgent" messages which have "eager" annotations, as well as the ordinary ruminations from the prover. The idea is to conceal as much irrelevant information from the user as possible; only the remaining output between prompts and after the last urgent message will be a candidate for the goal or response buffer. The internal variable @code{proof-shell-urgent-message-marker} tracks the last urgent message seen. When output is grabbed from the prover process, it is stored into @code{proof-shell-last-output}, and its type is stored in @code{proof-shell-last-output-kind}. Output which is deferred or possibly discarded until the queue is empty is copied into @code{proof-shell-delayed-output}, with type @code{proof-shell-delayed-output-kind}. @c TEXI DOCSTRING MAGIC: proof-shell-last-output @defvar proof-shell-last-output A record of the last string seen from the proof system. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-last-output-kind @defvar proof-shell-last-output-kind A symbol denoting the type of the last output string from the proof system.@* Specifically: @lisp @code{'interrupt} An interrupt message @code{'error} An error message @code{'abort} A proof abort message @code{'loopback} A command sent from the PA to be inserted into the script @code{'response} A response message @code{'goals} A goals (proof state) display @code{'systemspecific} Something specific to a particular system, -- see @samp{@code{proof-shell-process-output-system-specific}} @end lisp The output corresponding to this will be in @code{proof-shell-last-output}. See also @samp{@code{proof-shell-proof-completed}} for further information about the proof process output, when ends of proofs are spotted. This variable can be used for instance specific functions which want to examine @code{proof-shell-last-output}. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-delayed-output @defvar proof-shell-delayed-output A copy of @code{proof-shell-last-output} held back for processing at end of queue. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-delayed-output-kind @defvar proof-shell-delayed-output-kind A copy of proof-shell-last-output-lind held back for processing at end of queue. @end defvar @vindex proof-action-list @c TEXI DOCSTRING MAGIC: proof-shell-process-output @defun proof-shell-process-output cmd string Process shell output (resulting from @var{cmd}) by matching on @var{string}.@* @var{cmd} is the first part of the @code{proof-action-list} that lead to this output. The result of this function is a pair (@var{symbol} @var{newstring}). Here is where we recognizes interrupts, abortions of proofs, errors, completions of proofs, and proof step hints (proof by pointing results). They are checked for in this order, using @lisp @code{proof-shell-interrupt-regexp} @code{proof-shell-error-regexp} @code{proof-shell-abort-goal-regexp} @code{proof-shell-proof-completed-regexp} @code{proof-shell-result-start} @end lisp All other output from the proof engine will be reported to the user in the response buffer by setting @code{proof-shell-delayed-output} to a cons cell of ('insert . @var{text}) where @var{text} is the text string to be inserted. Order of testing is: interrupt, abort, error, completion. To extend this function, set @code{proof-shell-process-output-system-specific}. The "aborted" case is intended for killing off an open proof during retraction. Typically it matches the message caused by a @code{proof-kill-goal-command}. It simply inserts the word "Aborted" into the response buffer. So it is expected to be the result of a retraction, rather than the indication that one should be made. This function sets @samp{@code{proof-shell-last-output}} and @samp{@code{proof-shell-last-output-kind}}, which see. @end defun @c TEXI DOCSTRING MAGIC: proof-shell-urgent-message-marker @defvar proof-shell-urgent-message-marker Marker in proof shell buffer pointing to end of last urgent message. @end defvar @c TEXI DOCSTRING MAGIC: proof-shell-process-urgent-message @defun proof-shell-process-urgent-message message Analyse urgent @var{message} for various cases.@* Cases are: included file, retracted file, cleared response buffer, variable setting or dependency list. If none of these apply, display @var{message}. @var{message} should be a string annotated with @code{proof-shell-eager-annotation-start}, @code{proof-shell-eager-annotation-end}. @end defun The main processing point which triggers other actions is @code{proof-shell-filter}. @c TEXI DOCSTRING MAGIC: proof-shell-filter @defun proof-shell-filter str Filter for the proof assistant shell-process.@* A function for @code{comint-output-filter-functions}. Deal with output and issue new input from the queue. Handle urgent messages first. As many as possible are processed, using the function @samp{@code{proof-shell-process-urgent-messages}}. Otherwise wait until an annotated prompt appears in the input. If @code{proof-shell-wakeup-char} is set, wait until we see that in the output chunk @var{str}. This optimizes the filter a little bit. If a prompt is seen, run @code{proof-shell-process-output} on the output between the new prompt and the last input (position of @code{proof-marker}) or the last urgent message (position of @code{proof-shell-urgent-message-marker}), whichever is later. For example, in this case: @lisp PROMPT> @var{input} @var{output-1} @var{urgent-message} @var{output-2} PROMPT> @end lisp @code{proof-marker} is set after @var{input} by @code{proof-shell-insert} and @code{proof-shell-urgent-message-marker} is set after @var{urgent-message}. Only @var{output-2} will be processed. For this reason, error messages and interrupt messages should @strong{not} be considered urgent messages. Output is processed using @code{proof-shell-filter-process-output}. The first time that a prompt is seen, @code{proof-marker} is initialised to the end of the prompt. This should correspond with initializing the process. The ordinary output before the first prompt is ignored (urgent messages, however, are always processed; hence their name). @end defun @c TEXI DOCSTRING MAGIC: proof-shell-filter-process-output @defun proof-shell-filter-process-output string Subroutine of @code{proof-shell-filter} to process output @var{string}. Appropriate action is taken depending on the what @code{proof-shell-process-output} returns: maybe handle an interrupt, an error, or deal with ordinary output which is a candidate for the goal or response buffer. Ordinary output is only displayed when the proof action list becomes empty, to avoid a confusing rapidly changing output. After processing the current output, the last step undertaken by the filter is to send the next command from the queue. @end defun @c @c SECTION: Debugging @c @node Debugging @section Debugging @cindex debugging @c FIXME: better to have general hints on Elisp earlier, plus some @c links to helpful docs. To debug Proof General, it may be helpful to set the configuration variable @code{proof-show-debug-messages}. @c TEXI DOCSTRING MAGIC: proof-show-debug-messages @defopt proof-show-debug-messages Whether to display debugging messages in the response buffer.@* If non-nil, debugging messages are displayed in the response giving information about what Proof General is doing. To avoid erasing the messages shortly after they're printed, you should set @samp{@code{proof-tidy-response}} to nil. The default value is @code{nil}. @end defopt For more information about debugging Emacs lisp, consult the Emacs Lisp Reference Manual. I recommend using the source-level debugger @code{edebug}. @c @c @c APPENDIX: Plans and ideas @c @c @node Plans and ideas @appendix Plans and ideas This appendix contains some tentative plans and ideas for improving Proof General. This appendix is no longer extended: instead we keep a list of Proof General projects on the web, and forthcoming plans and ideas in the @file{TODO} and @file{todo} files included in the ordinary and developers PG distributions, respectively. Once the items mentioned below are implemented, they will be removed from here. Please send us contributions to our wish lists, or better still, an offer to implement something from them! @menu * Proof by pointing and similar features:: * Granularity of atomic command sequences:: * Browser mode for script files and theories:: @end menu @node Proof by pointing and similar features @section Proof by pointing and similar features @cindex proof by pointing This is a note by David Aspinall about proof by pointing and similar features. Proof General already supports proof by pointing, and experimental support is provided in LEGO. We would like to extend this support to other proof assistants. Unfortunately, proof by pointing requires rather heavy support from the proof assistant. There are two aspects to the support: @itemize @bullet @item term structure mark-up @item proof by pointing command generation @end itemize Term structure mark-up is useful in itself: it allows the user to explore the structure of a term using the mouse (the smallest subexpression that the mouse is over is highlighted), and easily copy subterms from the output to a proof script. Command generation for proof by pointing is usually specific to a particular logic in use, if we hope to generate a good proof command unambiguously for any particular click. However, Proof General could easily be generalised to offer the user a context-sensitive choice of next commands to apply, which may be more useful in practice, and a worthy addition to Proof General. Implementors of new proof assistants should be encouraged to consider supporting term-structure mark up from the start. Command generation should be something that the logic-implementor can specify in some way. Of the supported provers, we can certainly hope for proof-by-pointing support from Coq, since the CtCoq proof-by-pointing code has been moved into the Coq kernel lately. I hope the Coq community can encourage somebody to do this. @node Granularity of atomic command sequences @section Granularity of atomic command sequences @c @cindex Granularity of Atomic Sequences @c @cindex Retraction @c @cindex Goal @cindex ACS (Atomic Command Sequence) This is a proposal by Thomas Kleymann for generalising the way Proof General handles sequences of proof commands (see @i{Goal-save sequences} in the user manual), particularly to make retraction more flexible. The blue region of a script buffer contains the initial segment of the proof script which has been processed successfully. It consists of atomic sequences of commands (ACS). Retraction is supported to the beginning of every ACS. By default, every command is an ACS. But the granularity of atomicity should be able to be adjusted. This is essential when arbitrary retraction is not supported. Usually, after a theorem has been proved, one may only retract to the start of the goal. One needs to mark the proof of the theorem as an ACS. At present, support for goal-save sequences (see @i{Goal-save sequences} in the user manual), has been hard wired. No other ACS are currently supported. We propose the following to overcome this deficiency: @vtable @code @item proof-atomic-sequents-list is a list of instructions for setting up ACSs. Each instruction is a list of the form @code{(@var{end} @var{start} &optional @var{forget-command})}. @var{end} is a regular expression to recognise the last command in an ACS. @var{start} is a function. Its input is the last command of an ACS. Its output is a regular expression to recognise the first command of the ACS. It is evaluated once and, starting with the command matched by @var{end}, the output is successively matched against previously processed commands until a match occurs (or the beginning of the current buffer is reached). The region determined by (@var{start},@var{end}) is locked as an ACS. Optionally, the ACS is annotated with the actual command to retract the ACS. This is computed by applying @var{forget-command} to the first and last command of the ACS. For convenience one might also want to allow @var{start} to be the symbol @samp{t} as a convenient short-hand for @code{'(lambda (str) ".")} which always matches. @end vtable @node Browser mode for script files and theories @section Browser mode for script files and theories This is a proposal by David Aspinall for a browser window. A browser window should provide support for browsing script files and theories. We should be able to inspect data in varying levels of detail, perhaps using outlining mechanisms. For theories, it would be nice to query the running proof assistant. This may require support from the assistant in the form of output which has been specially marked-up with an SGML like syntax, for example. A browser would be useful to: @itemize @bullet @item Provide impoverished proof assistants with a browser @item Extend the uniform interface of Proof General to theory browsing @item Interact closely with proof script writing @end itemize The last point is the most important. We should be able to integrate a search mechanism for proofs of similar theorems, theorems containing particular constants, etc. @c @c @c APPENDIX: Demonstration instantiation for Isabelle @c @c @node Demonstration Instantiations @appendix Demonstration Instantiations This appendix contains the code for the two demonstration instantiations of Proof General, for Isabelle. These instantiations make an almost-bare minimum of settings to get things working. To add embellishments, you should refer to the instantiations for other systems distributed with Proof General. @menu * demoisa-easy.el:: * demoisa.el:: @end menu @node demoisa-easy.el @section demoisa-easy.el @lisp @c FIXME: MAGIC NEEDED TO INCLUDE FILE VERBATIM @c @includeverbatim ../demoisa/demoisa-easy.el ;; demoisa-easy.el Example Proof General instance for Isabelle ;; ;; Copyright (C) 1999 LFCS Edinburgh. ;; ;; Author: David Aspinall ;; ;; $Id$ ;; ;; This is an alternative version of demoisa.el which uses the ;; proof-easy-config macro to do the work of declaring derived modes, ;; etc. ;; ;; See demoisa.el and the Proof General manual for more documentation. ;; ;; To test this file you must rename it demoisa.el. ;; (require 'proof-easy-config) ; easy configure mechanism (proof-easy-config 'demoisa "Isabelle Demo" proof-prog-name "isabelle" proof-terminal-char ?\; proof-comment-start "(*" proof-comment-end "*)" proof-goal-command-regexp "^Goal" proof-save-command-regexp "^qed" proof-goal-with-hole-regexp "qed_goal \"\\(\\(.*\\)\\)\"" proof-save-with-hole-regexp "qed \"\\(\\(.*\\)\\)\"" proof-non-undoables-regexp "undo\\|back" proof-goal-command "Goal \"%s\";" proof-save-command "qed \"%s\";" proof-kill-goal-command "Goal \"PROP no_goal_set\";" proof-showproof-command "pr()" proof-undo-n-times-cmd "pg_repeat undo %s;" proof-auto-multiple-files t proof-shell-cd-cmd "cd \"%s\"" proof-shell-prompt-pattern "[ML-=#>]+>? " proof-shell-interrupt-regexp "Interrupt" proof-shell-start-goals-regexp "Level [0-9]" proof-shell-end-goals-regexp "val it" proof-shell-quit-cmd "quit();" proof-assistant-home-page "http://www.cl.cam.ac.uk/Research/HVG/Isabelle/" proof-shell-annotated-prompt-regexp "^\\(val it = () : unit\n\\)?ML>? " proof-shell-error-regexp "\\*\\*\\*\\|^.*Error:\\|^uncaught exception \\|^Exception- " proof-shell-init-cmd "fun pg_repeat f 0 = () | pg_repeat f n = (f(); pg_repeat f (n-1));" proof-shell-proof-completed-regexp "^No subgoals!" proof-shell-eager-annotation-start "^\\[opening \\|^###\\|^Reading") (provide 'demoisa) @end lisp @node demoisa.el @section demoisa.el @lisp @c FIXME: MAGIC NEEDED TO INCLUDE FILE VERBATIM @c @includeverbatim ../demoisa/demoisa-easy.el ;; demoisa.el Example Proof General instance for Isabelle ;; ;; Copyright (C) 1999 LFCS Edinburgh. ;; ;; Author: David Aspinall ;; ;; $Id$ ;; ;; ================================================================= ;; ;; See README in this directory for an introduction. ;; ;; Basic configuration is controlled by one line in `proof-site.el'. ;; It has this line in proof-assistant-table: ;; ;; (demoisa "Isabelle Demo" "\\.ML$") ;; ;; From this it loads this file "demoisa/demoisa.el" whenever ;; a .ML file is visited, and sets the mode to `demoisa-mode' ;; (defined below). ;; ;; I've called this instance "Isabelle Demo Proof General" just to ;; avoid confusion with the real "Isabelle Proof General" in case the ;; demo gets loaded by accident. ;; ;; To make the line above take precedence over the real Isabelle mode ;; later in the table, set PROOFGENERAL_ASSISTANTS=demoisa in the ;; shell before starting Emacs (or customize proof-assistants). ;; (require 'proof) ; load generic parts ;; ======== User settings for Isabelle ======== ;; ;; Defining variables using customize is pretty easy. ;; You should do it at least for your prover-specific user options. ;; ;; proof-site provides us with two customization groups ;; automatically: (based on the name of the assistant) ;; ;; 'isabelledemo - User options for Isabelle Demo Proof General ;; 'isabelledemo-config - Configuration of Isabelle Proof General ;; (constants, but may be nice to tweak) ;; ;; The first group appears in the menu ;; ProofGeneral -> Customize -> Isabelledemo ;; The second group appears in the menu: ;; ProofGeneral -> Internals -> Isabelledemo config ;; (defcustom isabelledemo-prog-name "isabelle" "*Name of program to run Isabelle." :type 'file :group 'isabelledemo) (defcustom isabelledemo-web-page "http://www.cl.cam.ac.uk/Research/HVG/isabelle.html" "URL of web page for Isabelle." :type 'string :group 'isabelledemo-config) ;; ;; ======== Configuration of generic modes ======== ;; (defun demoisa-config () "Configure Proof General scripting for Isabelle." (setq proof-terminal-char ?\; ; ends every command proof-comment-start "(*" proof-comment-end "*)" proof-goal-command-regexp "^Goal" proof-save-command-regexp "^qed" proof-goal-with-hole-regexp "qed_goal \"\\(\\(.*\\)\\)\"" proof-save-with-hole-regexp "qed \"\\(\\(.*\\)\\)\"" proof-non-undoables-regexp "undo\\|back" proof-undo-n-times-cmd "pg_repeat undo %s;" proof-showproof-command "pr()" proof-goal-command "Goal \"%s\";" proof-save-command "qed \"%s\";" proof-kill-goal-command "Goal \"PROP no_goal_set\";" proof-assistant-home-page isabelledemo-web-page proof-auto-multiple-files t)) (defun demoisa-shell-config () "Configure Proof General shell for Isabelle." (setq proof-shell-annotated-prompt-regexp "^\\(val it = () : unit\n\\)?ML>? " proof-shell-cd-cmd "cd \"%s\"" proof-shell-prompt-pattern "[ML-=#>]+>? " proof-shell-interrupt-regexp "Interrupt" proof-shell-error-regexp "\\*\\*\\*\\|^.*Error:\\|^uncaught exception \\|^Exception- " proof-shell-start-goals-regexp "Level [0-9]" proof-shell-end-goals-regexp "val it" proof-shell-proof-completed-regexp "^No subgoals!" proof-shell-eager-annotation-start "^\\[opening \\|^###\\|^Reading" proof-shell-init-cmd ; define a utility function, in a lib somewhere? "fun pg_repeat f 0 = () | pg_repeat f n = (f(); pg_repeat f (n-1));" proof-shell-quit-cmd "quit();")) ;; ;; ======== Defining the derived modes ======== ;; ;; The name of the script mode is always -script, ;; but the others can be whatever you like. ;; ;; The derived modes set the variables, then call the ;; -config-done function to complete configuration. (define-derived-mode demoisa-mode proof-mode "Isabelle Demo script" nil (demoisa-config) (proof-config-done)) (define-derived-mode demoisa-shell-mode proof-shell-mode "Isabelle Demo shell" nil (demoisa-shell-config) (proof-shell-config-done)) (define-derived-mode demoisa-response-mode proof-response-mode "Isabelle Demo response" nil (proof-response-config-done)) (define-derived-mode demoisa-goals-mode proof-goals-mode "Isabelle Demo goals" nil (proof-goals-config-done)) ;; The response buffer and goals buffer modes defined above are ;; trivial. In fact, we don't need to define them at all -- they ;; would simply default to "proof-response-mode" and "pbp-mode". ;; A more sophisticated instantiation might set font-lock-keywords to ;; add highlighting, or some of the proof by pointing markup ;; configuration for the goals buffer. ;; The final piece of magic here is a hook which configures settings ;; to get the proof shell running. Proof General needs to know the ;; name of the program to run, and the modes for the shell, response, ;; and goals buffers. (add-hook 'proof-pre-shell-start-hook 'demoisa-pre-shell-start) (defun demoisa-pre-shell-start () (setq proof-prog-name isabelledemo-prog-name) (setq proof-mode-for-shell 'demoisa-shell-mode) (setq proof-mode-for-response 'demoisa-response-mode) (setq proof-mode-for-goals 'demoisa-goals-mode)) (provide 'demoisa) @end lisp @node Function Index @unnumbered Function and Command Index @printindex fn @node Variable Index @unnumbered Variable and User Option Index @printindex vr @c Nothing in this one! @c @node Keystroke Index @c @unnumbered Keystroke Index @c @printindex ky @node Concept Index @unnumbered Concept Index @printindex cp @page @contents @bye