/* -*- mode: C++; tab-width: 4 -*- */
/* ===================================================================== *\
	Copyright (c) 1998-2001 Palm, Inc. or its subsidiaries.
	All rights reserved.

	This file is part of the Palm OS Emulator.

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.
\* ===================================================================== */

#ifndef EmUARTDragonball_h
#define EmUARTDragonball_h

#include "EmThreadSafeQueue.h"	// EmByteQueue

class EmTransport;
class SessionFile;


class EmUARTDragonball
{
	public:
		enum UART_Type
		{
			kUART_Dragonball,
			kUART_DragonballEZ,
			kUART_DragonballVZ,
			kUART_DragonballSZ
		};

		struct State
		{
			State (UART_Type type) { UART_TYPE = type; }

			UART_Type	UART_TYPE;

		// +	= Supported
		//		= Unsupported
		// ->	= Input value
		// <-	= Output value

			// UART control register bits
			// These are all values the user sets; we just look at them.

		/*  +  ->  */	unsigned int	UART_ENABLE:1;
		/*  +  ->  */	unsigned int	RX_ENABLE:1;
		/*  +  ->  */	unsigned int	TX_ENABLE:1;
		/*     ->  */	unsigned int	RX_CLK_CONT:1;
		/*  +  ->  */	unsigned int	PARITY_EN:1;
		/*  +  ->  */	unsigned int	ODD_EVEN:1;
		/*  +  ->  */	unsigned int	STOP_BITS:1;
		/*  +  ->  */	unsigned int	CHAR8_7:1;
		/*     ->  */	unsigned int	GPIO_DELTA_ENABLE:1;	// 68328 only
		/*     ->  */	unsigned int	OLD_ENABLE:1;			// 68EZ328 only
		/*     ->  */	unsigned int	CTS_DELTA_ENABLE:1;
		/*  +  ->  */	unsigned int	RX_FULL_ENABLE:1;
		/*  +  ->  */	unsigned int	RX_HALF_ENABLE:1;
		/*  +  ->  */	unsigned int	RX_RDY_ENABLE:1;
		/*  +  ->  */	unsigned int	TX_EMPTY_ENABLE:1;
		/*  +  ->  */	unsigned int	TX_HALF_ENABLE:1;
		/*  +  ->  */	unsigned int	TX_AVAIL_ENABLE:1;

			// Baud control register bits
			// These are all values the user sets; we just look at them.

		/*     ->  */	unsigned int	GPIO_DELTA:1;			// 68328 only
		/*     ->  */	unsigned int	GPIO:1;					// 68328 only
		/*     ->  */	unsigned int	GPIO_DIR:1;				// 68328 only
		/*     ->  */	unsigned int	GPIO_SRC:1;				// 68328 only
		/*     ->  */	unsigned int	UCLK_DIR:1;				// 68EZ328 only
		/*     ->  */	unsigned int	BAUD_SRC:1;
		/*  +  ->  */	unsigned int	DIVIDE;
		/*  +  ->  */	unsigned int	PRESCALER;

			// Receive register bits
			// These are all input bits; we set them, not the user.

		/*  +  <-  */	unsigned int	RX_FIFO_FULL:1;
		/*  +  <-  */	unsigned int	RX_FIFO_HALF:1;
		/*  +  <-  */	unsigned int	DATA_READY:1;
		/*     <-  */	unsigned int	OLD_DATA:1;				// 68EZ328 only
		/*     <-  */	unsigned int	OVRUN:1;
		/*     <-  */	unsigned int	FRAME_ERROR:1;
		/*     <-  */	unsigned int	BREAK:1;
		/*     <-  */	unsigned int	PARITY_ERROR:1;
		/*  +  <-  */	unsigned int	RX_DATA;

			// Transmitter register bits
			// The user sets TX_DATA, IGNORE_CTS, and SEND_BREAK.
			// We set the rest.

		/*  +  <-  */	unsigned int	TX_FIFO_EMPTY:1;
		/*  +  <-  */	unsigned int	TX_FIFO_HALF:1;
		/*  +  <-  */	unsigned int	TX_AVAIL:1;
		/*     ->  */	unsigned int	SEND_BREAK:1;
		/*  +  ->  */	unsigned int	IGNORE_CTS:1;
		/*  +  <-  */	unsigned int	BUSY:1;					// 68EZ328 only
		/*  +  <-  */	unsigned int	CTS_STATUS:1;
		/*     <-  */	unsigned int	CTS_DELTA:1;
		/*  +  ->  */	unsigned int	TX_DATA;

			// Misc register bits
			// These are all values the user sets; we just look at them.

		/*     ->  */	unsigned int	BAUD_TEST:1;			// 68EZ328 only
		/*     ->  */	unsigned int	CLK_SRC:1;
		/*     ->  */	unsigned int	FORCE_PERR:1;
		/*  +  ->  */	unsigned int	LOOP:1;
		/*     ->  */	unsigned int	BAUD_RESET:1;			// 68EZ328 only
		/*     ->  */	unsigned int	IR_TEST:1;				// 68EZ328 only
		/*  +  ->  */	unsigned int	RTS_CONT:1;
		/*  +  ->  */	unsigned int	RTS:1;
		/*  +  ->  */	unsigned int	IRDA_ENABLE:1;
		/*     ->  */	unsigned int	IRDA_LOOP:1;
		/*     ->  */	unsigned int	RX_POL:1;				// 68EZ328 only
		/*     ->  */	unsigned int	TX_POL:1;				// 68EZ328 only

			// Level Marker Interrupt

		/*  +  ->  */	unsigned int	TXFIFO_LEVEL_MARKER:4;	// 68SZ328 only
		/*  +  ->  */	unsigned int	RXFIFO_LEVEL_MARKER:4;	// 68SZ328 only
		};

								EmUARTDragonball	(UART_Type, int uartNum);
								~EmUARTDragonball	(void);

		void					StateChanged		(State&, Bool sendRxData);
		void					UpdateState			(State&, Bool refreshRxData);

		void					TransmitTxFIFO		(EmTransport*);
		void					ReceiveRxFIFO		(EmTransport*);

		EmTransport*			GetTransport		(void);

	private:
		int						PrvFIFOSize			(Bool forRX);
		int						PrvLevelMarker		(Bool forRX);

	private:
		int						fUARTNum;
		State					fState;
		EmByteQueue				fRxFIFO;
		EmByteQueue				fTxFIFO;
};

#endif /* EmUARTDragonball_h */