aboutsummaryrefslogtreecommitdiffhomepage
path: root/test/notmuch-test
Commit message (Collapse)AuthorAge
...
* Revert "test: Break on test script (or other) error"Gravatar Carl Worth2010-12-07
| | | | | | | | This reverts commit f22a7ec1e28d1264cf9d67d78796b8ab22e09a35. Interrupting the test suite due to an actual bug in a test script would be just fine, but interrupting the run of the entire test suite at the first test failure is unacceptable.
* test: Add simple tests for "notmuch search --output=<>"Gravatar Carl Worth2010-11-23
| | | | | | | | | | | This code simply wasn't being exercised by the test suite before, so this will be useful. Meanwhile, there's currently a bug in "notmuch search --output=tags" in that it doesn't print a final newline. But the current test suite isn't able to catch this bug since the $() construct of the shell doesn't preserve the distinction of whether the final newline is present or not.
* test: Break on test script (or other) errorGravatar Michal Sojka2010-11-16
| | | | | | | | | Break notmuch-test whenever a test script returns non-zero status. This happens either when some test from the script fails or when there is an error in the script. This is especially useful in the latter case since the error may not appear in the final aggregated results.
* Tests for maildir synchronizationGravatar Michal Sojka2010-11-10
| | | | Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* Rename "notmuch cat" to "notmuch show --format=raw"Gravatar Carl Worth2010-11-06
| | | | | | | | | This is part of an effort to avoid proliferation of excessive top-level notmuch commands. Also, "raw" better captures the functionality here, (as opposed to "cat" which is a fairly oblique reference to a bad Unix abbreviation whose metaphor doesn't work here since "notmuch cat" operates only on a single message and hence cannot "con'cat'enate" anything).
* Add 'cat' subcommandGravatar Michal Sojka2010-11-05
| | | | | | | | | | | | This command outputs a raw message matched by search term to the standard output. It allows MUAs to access the messages for piping, attachment manipulation, etc. by running notmuch cat rather then directly access the file. This will simplify the MUAs when they need to operate on a remote database. Edited-by: Carl Worth <cworth@cworth.org>: Remove trailing whitespace, add missing "test_done" to new test script to avoid "Unexpected exit" error.
* test: Emit a friendly error message if run with bash < 4.0.Gravatar Carl Worth2010-10-28
| | | | | | | | | | The bash code in the test suite is using associative arrays which were only added to bash as of release 4.0. If the test suite is run with an older bash, we now immediately error out and explain the situation, (instead of emitting confusing error messages and failing dozens of tests, which is what happened before this change).
* test: Add the most rudimentary testing of the emacs interface.Gravatar Carl Worth2010-10-22
| | | | | | So far, this is doing nothing more than adding a corpus of email and ensuring that the `notmuch-hello' function produces the desired output.
* test: Fix the search and dump-restore tests to operator on non-empty mail store.Gravatar Carl Worth2010-09-20
| | | | | We do this with a new add_email_corpus function that establishes a mail store with 50 messages from the notmuch mailing list.
* test: Print section names, and rename all test sectionsGravatar Carl Worth2010-09-20
| | | | | | | | Now that we can usefully pass section names via the NOTMUCH_SKIP_TESTS environment variable, it's useful to actually print those names out for the user. Then, since we're now printing these names, let's use nicer names, (not excessively long but also not using abbreviations like "msg").
* test: Fix notmuch-test to pass command-line arguments to sub-scripts.Gravatar Carl Worth2010-09-20
| | | | The is useful for things like "notmuch-test --valgrind", etc.
* test: Rename all tests to get rid of the ugly numbers in file names.Gravatar Carl Worth2010-09-17
| | | | | | | The numbers were meaningless, and they made it hard to find a file of interest. Instead, we get the ordering we want by adding an explicit list of tests to run to the notmuch-test script.
* test: Cleanup the test outputGravatar Carl Worth2010-09-17
| | | | | | | | | | | | | | | | This makes the new, git-derived test suite report results in a manner similar to the original notmuch test suite. Notable changes include: * No more initial '*' on every line * Only colorize a single word * Don't print useless test numbers * Use "PASS" in place of "ok" * Begin sentences with a capital letter * Print test descriptions for each block * Separate each block of tests with a blank line * Don't summarize counts between each block
* test: Fix test suite to integrate with our non-recursive Makefile system.Gravatar Carl Worth2010-09-17
| | | | | | | This avoids "make test" emitting messages from three (3!) recursive invocations of make. We change the invocations of the tests themselves to occur directly from the shell script rather than having the shell script invoke make again and using wildcards in the Makefile.
* Convert the actual tests to the new frameworkGravatar Michal Sojka2010-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes are: - The notmuch-test was split into several files (t000?-*.sh). - Removed helper functions which were moved to test-lib.sh - Replaced every printf with test_expect_success. - Test commands chained with && (test-lib.sh doesn't use "set -e" in order to complete the test suite even if something fails) - Many variables such as ${MAIL_DIR} were properly quoted as they contain spaces. - Changed quoting patterns in add_message and generate_message (single quotes are already used by the test framework). - ${TEST_DIR} replaced by ${PWD} QUICK HOWTO: To run the whole test suite make To run only a single test ./t0001-new.sh To stop on the first error ./t0001-new.sh -i then mail store and database can be inspected in "trash directory.t0001-new" To see the output of tests ./t0001-new.sh -v To not remove trash directory at the end: ./t0001-new.sh -d To run all tests verbosely: make GIT_TEST_OPTS="-v" Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* Avoid giving GMime a NULL MIME-stream filter.Gravatar Carl Worth2010-06-05
| | | | | | | | | | | | | | | | | | | | Micah Anderson reported an issue where a message failed to display in the emacs interface, (it instead gave an error, "json-read-string: Bad string format"). Micah tracked this down to the json output from "notmuch show" being interrupted by a GMime error message: gmime-CRITICAL **: g_mime_stream_filter_add: assertion `GMIME_IS_FILTER (filter) I tracked this down further to notmuch passing a NULL value to g_mime_stream_filter_add. And this was due to calling g_mime_filter_charset_new with a value of "unknown-8bit". So we add a test message withe a Conten-Type of "text/plain; charset=unknown-8bit" from Micah's message. Then we fix "notmuch show" to test for NULL before calling g_mime_stream_filter_add. Bug fixed.
* Add support (and tests) for messages with really long message IDs.Gravatar Carl Worth2010-06-04
| | | | | | | | | | | | | | | | | | | | | | | Scott Henson reported an internal error that occurred when he tried to add a message that referenced another message with a message ID well over 300 characters in length. The bug here was running into a Xapian limit for the length of metadata key names, (which is even more restrictive than the Xapian limit for the length of terms). We fix this by noticing long message ID values and instead using a message ID of the form "notmuch-sha1-<sha1_sum_of_message_id>". That is, we use SHA1 to generate a compressed, (but still unique), version of the message ID. We add support to the test suite to exercise this fix. The tests add a message referencing the long message ID, then add the message with the long message ID, then finally add another message referencing the long ID. Each of these tests exercise different code paths where the special handling is implemented. A final test ensures that all three messages are stitched together into a single thread---guaranteeing that the three code paths all act consistently.
* test suite: Generate message filenames from count, not Message-Id.Gravatar Carl Worth2010-06-04
| | | | | | | We're about to add a test with an excessively long message-id, (512 characters or so). This exceeds filename length limits, so just always the simple counter to generate the filenames, (which we were doing for messages with non-custom IDs anyway).
* test suite: Add support for custom references header in generated messages.Gravatar Carl Worth2010-06-04
| | | | In the same style as several other existing headers.
* Add a test case for the previous commit.Gravatar Carl Worth2010-06-03
| | | | | | | | | | | The commit said it fixed a problem with headers >200 characters long. But examination of the code suggests that it was a header of exactly 200 characters long that caused the problem. So we add a test case for that here. Before the fix in the previous commit, valgrind would detect many errors when replying to the message created with this test case. After that commit, those errors are gone.
* test: Exercise magic-from guessing with a single configured addressGravatar Carl Worth2010-04-27
| | | | | | | | | | Immediately after releasing 0.3 we learned that the magic-from-guessing code could hang in an infinite loop in some cases. The bug occurred only when the user had configured only a primary email addresss and no other email addresses. The test suite wasn't previously covering this case, so address this shortcoming.
* Add tests for author name reordering in search resultsGravatar Dirk Hohndel2010-04-26
| | | | | | This should be required for all patches :-) Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
* test: Comment why we need to set TZGravatar Michal Sojka2010-04-26
|
* fix expected test result to include Bcc linesGravatar Dirk Hohndel2010-04-23
| | | | | | | | | | | | | | | | this test actually tests behavior that I consider as broken. The Bcc should be to the same address as used in the From line, otherwise we are creating a potential information leak as email that is related to one email account (say, work) is copied to a different account Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Reviewed-by: Carl Worth <cworth@cworth.org> These tests don't actually pass yet, since the feature being tested has not been merged. But gettting these tests in first will let us more easily test that the feature actually works, (and will help us ensure we don't forget the feature before the next release).
* add From guessing tests to test suiteGravatar Dirk Hohndel2010-04-23
| | | | | | | | right now these are not trying to be overly fancy simply one test per strategy that we apply to figure out the best from address - including the fallback if there's nothing to go on Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
* test: Set fixed time zoneGravatar Michal Sojka2010-04-23
| | | | | | | | | | | | | | | | | | | | | | | When the test suite is run in a different time zone that where Carl lives, some tests may fail depending on the time when the test suite is run. For example, just now I get: Search for all messages ("*"):... FAIL --- test-031.expected 2010-04-23 09:33:47.898634822 +0200 +++ test-031.output 2010-04-23 09:33:47.898634822 +0200 @@ -1,5 +1,5 @@ -thread:XXX 2001-01-05 [1/1] Notmuch Test Suite; Test message #6 (inbox unread) -thread:XXX 2001-01-05 [1/1] Notmuch Test Suite; Test message #14 (inbox unread) +thread:XXX 2001-01-06 [1/1] Notmuch Test Suite; Test message #6 (inbox unread) +thread:XXX 2001-01-06 [1/1] Notmuch Test Suite; Test message #14 (inbox unread) thread:XXX 2000-01-01 [1/1] Notmuch Test Suite; body search (inbox unread) thread:XXX 2000-01-01 [1/1] searchbyfrom; search by from (inbox unread) thread:XXX 2000-01-01 [1/1] Notmuch Test Suite; search by to (inbox unread) By setting a fixed time zone in the test script, these problems should be eliminated. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* test: Put the json tests into their own section.Gravatar Carl Worth2010-04-22
| | | | | Not that the sections actually mean anything yet, but it makes for clean output.
* First tests for JSON output and UTF-8 in mail body and subjectGravatar Gregor Hoffleit2010-04-22
| | | | | | | | | | | | | | | | | | | | The test suite doesn't yet cover --format=json output nor UTF-8 in subject or body. This patch starts with test cases for 'search --format=json' and 'show --format=json'. Furthermore, it has test cases for a search for a UTF-8 string in a mail body for a UTF-8 string in a mail subject. Finally, it has a test case for --format=json with UTF-8 messages, demonstrating the fix in 1267697893-sup-4538@sam.mediasupervision.de. Reviewed-by: Carl Worth <cworth@cworth.org> Updated tests to current implementation of the test suite. These tests demonstrate a bug in the current implementation of "notmuch show --format=json", (timestamp output is changed depending on current timezone).
* test: Make existing "notmuch show" test more resilientGravatar Carl Worth2010-04-22
| | | | | | | If future updates to the test suite add more messages to the database before this "notmuch show" test, then the message-ID numbers in the expected output will all change. But we can at least compute the numbers so that this test will continue to pass.
* test: Add a test to demonstrate message-sorting regression.Gravatar Carl Worth2010-04-22
| | | | | | | | | | | In the recent change to rename threads based on changing subject lines, I broke message ordering within "notmuch show" output. But our test suite didn't catch that regressions, because we didn't have any tests of "notmuch show". This adds one "notmuch show" test along with the thread-naming tests. It's not a whole suite of "notmuch show" testing, but it does catch this regression at least.
* test: When a test fails, show diff only (save complete output to a file)Gravatar Carl Worth2010-04-22
| | | | | | | | We're starting to get test output that's fairly long, so it's much kinder to just show a diff rather than displaying the complete expected and actual output. To allow the user to investigate things after the fact, we save the expected and actual output to files named test-${test_number}.expected and test-${test_number}.output .
* test: Improve grammar in test-message subjects.Gravatar Carl Worth2010-04-22
| | | | | Before codifying these in any expected test output, I'd like them to at least resemble English.
* test: Add tests for naming threads with changing subjects.Gravatar Carl Worth2010-04-21
| | | | | | | | We recently added a feature to name threads based on the messages that actually matched the search, (as opposed to simply the oldest or newest message in the thread whether it matched or not). So add tests for that, and (surprise, surprise!) the feature does not entirely work.
* make test: Actually count and report on failures.Gravatar Carl Worth2010-04-15
| | | | | | | | Hurrah---no more manual verification of that PASS column. This means that "make test" can actually be a useful part of the release process now, (since it will exit with non-zero status if there are any failures).
* test: Unify all tests to use the pass_if_equal function.Gravatar Carl Worth2010-04-15
| | | | | | | | | | | Previously some tests (dump/restore) were doing ad-hoc verification of values and their own printing of PASS/FAIL, etc. This made it impossible to count test pass/fail rates in a single place. The only reason these tests were written that way was because the old execute_expecting function only worked if one could directly test the stdout output of a notmuch command. The recent switch to pass_if_equal means that all tests can use it.
* test: Align the PASS/FAIL column.Gravatar Carl Worth2010-04-15
| | | | Just to make things a little more pleasant to look at.
* test: Add a test for "notmuch search '*'"Gravatar Carl Worth2010-04-15
| | | | | | | | | This feature was added recently and should have gotten a new test at the time. As this test demonstrates, the code is broken, ("notmuch search '*' returns bogus dates of the Unix epoch for any threads where the term "and" does not appear in any messages).
* test: Use an older date for the generated messages.Gravatar Carl Worth2010-04-15
| | | | | | Using a date in the current year makes the test suite fragile since the search output will include a date of "January 05" for now, but will start doing "2010-01-05" in the future.
* test: Remove test-message filenames from generated messagesGravatar Carl Worth2010-04-15
| | | | | | | | | | The filenames aren't predictable (including the current directory) nor stable from one run to the next (including the PID). This makes it hard to predict the output from a search command that returns such a message (such as "*"). The original goal was simply to ensure that each generated message was distinguishable somehow. So just use the message counter instead.
* test: Disentangle execution of notmuch from the examination of the results.Gravatar Carl Worth2010-04-15
| | | | | | | | | | | | | | The old execute_expecting function was doing far too much for its own good. One of the worst aspects of this was that it introduced shell-quoting challengers where the caller could not easily control the precise invocation of the command to be executed. I personally couldn't find a way to test "notmuch search '*'" without the shell expanding * against files in the current directory, or having bogus quotation marks appearing in the search string, (defeating the recognition of "*" as a special search term). Hopefully this aspect of the test suite will be much easier to maintain now.
* test: Fix reply tests to track insignificant change in output.Gravatar Carl Worth2010-04-14
| | | | | | | | | | The recent fix to properly decode encoded headers made the expected output of "notmuch reply" differ by a single space, (previously, there were two spaces before the References: value and now there is just one). Fix the test suite so that these are all noted as correct results again.
* test: Add new tests for out-of-order messages.Gravatar James Westby2010-04-12
| | | | | | | | | | | | | | | | | | | | | These new tests demonstrate a bug as follows: Multiple messages are added to the database All of these message references a common parent The parent message does not exist in the databas In this scenario, the messages will not be recognized as belonging to the same thread. We consider this a bug, and the new tests treat this as a failure. Edited by Carl Worth <cworth@cworth.org>: Split these tests into their own commit (before the fix of the bug). This lets me see the actual failure in the test suite, before the fix is applied. Also fix the alignment of new messages from test suite, (so that the PASS portions all line up---which is important while we're still manually verifying test-suite results).
* test: Fix phrase-search tests.Gravatar Carl Worth2010-03-31
| | | | | With some extra qutotation marks, we are now doing actual phrase searches so these tests pass.
* test: Add some negative results for the phrase searches.Gravatar Carl Worth2010-03-31
| | | | | | | | | These results have all the same terms as the target phrase, but not in the expected order. They are designed to ensure that we actually test phrase searches. And as it turns out, we're not currently quoting the search terms properly, so the phrase-search tests now fail with this commit.
* Switch from random to sequential thread identifiers.Gravatar Carl Worth2010-02-09
| | | | | | | | | | | | | The sequential identifiers have the advantage of being guaranteed to be unique (until we overflow a 64-bit unsigned integer), and also take up half as much space in the "notmuch search" output (16 columns rather than 32). This change also has the side effect of fixing a bug where notmuch could block on /dev/random at startup (waiting for some entropy to appear). This bug was hit hard by the test suite, (which could easily exhaust the available entropy on common systems---resulting in large delays of the test suite).
* notmuch-test: Add basic tests for "notmuch dump" and "notmuch restore"Gravatar Carl Worth2010-02-05
| | | | Our test-suite coverage keeps improving, (slowly).
* notmuch-test: Fix misalignment in output.Gravatar Carl Worth2010-02-05
| | | | Clean output is just so much easier to read (and validate).
* notmuch-test: Add test to verify that uuencoded data is not indexed.Gravatar Carl Worth2010-02-05
| | | | | As recently promised, no new features are being accepted to notmuch without corresponding new tests for the test suite.
* notmuch-test: Add several tests of "notmuch search"Gravatar Carl Worth2010-02-05
| | | | | | These tests were surprisingly simple to write---not much code at all and most of them worked the first time even with hand-prepared versions of the expected output.
* notmuch-test: Add a new add_message function.Gravatar Carl Worth2010-02-04
| | | | | | | The previous generate_message function is what's needed when testing "notmuch new". But after that, we never want to generate a message without also adding it to the index. So create a new add_message function with this convenience.
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-29 07:47:33 +0000