| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
|
|
| |
Commit d38bc531 is incorrect: the 50ms queue-ahead value and the flip
queue offset have different functions. The latter is about calling
flip_page in advance, so the change attempted to show video frames 50ms
in advance on all VOs.
The change was for vo_opengl_cb, but that can be handled differently.
|
|
|
|
|
|
| |
A small refactor; shouldn't change any behavior.
Do this so immediate display can be achieved.
|
|
|
|
|
|
|
|
|
| |
Same as with the previous commits.
In theory, vdpau/x11 GL interop doesn't assume GLX. It could use EGL as
well. But since it's always GLX in practice, so we're fine with this.
Remove the gl_hwdec.mpgl field - it's unused now.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a generic mechanism to the VO to relay "extra" events from VO to
player. Use it to notify the core of window resizes, which in turn will
be used to mark all affected properties ("window-scale" in this case) as
changed.
(I refrained from hacking this as internal command into input_ctx, or to
poll the state change, etc. - but in the end, maybe it would be best to
actually pass the client API context directly to the places where events
can happen.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At least on kwin, we decide to proceed without waiting for the window
being mapped (due to the frame exts hack, see commit 8c002b79). But that
leaves us with a window size of 0x0, which causes VdpOutputSurfaceCreate
to fail. This prints some warnings, although vo_vdpau recovers later and
this has no other bad consequences.
Do the following things to deal with this:
- set the "known" window size to the suggested window size before the
window is even created
- allow calling XGetGeometry on the window even if the window is not
mapped yet (this should work just fine)
- make the output surface minimum size 1x1
Strictly speaking, only one of these would be required to make the
warning disappear, but they're all valid changes and increase robustness
and correctness. At no point we use a window size of 0x0 as magic value
for "unset" or unknown size, so keeping it unset has no purpose anyway.
CC: @mpv-player/stable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_vdpau uses its own framedrop code, mostly for historic reasons. It
has some tricky heuristics, of which I'm not sure how they work, or if
they have any effect at all, but in any case, I want to keep this code
for now. One day it might get fully ported to the vo.c framedrop code,
or just removed.
But improve its interaction with the user-visible framedrop controls.
Make --framedrop actually enable and disable the vo_vdpau framedrop
code, and increment the number of dropped frames correctly.
The code path for other VOs should be equivalent. The vo_vdpau behavior
should, except for the improvements mentioned above, be mostly
equivalent as well. One minor change is that frames "shown" during
preemption are always count as dropped.
Remove the statement from the manpage that vo_vdpau is the default; this
hasn't been the case for a while.
|
|
|
|
|
|
|
| |
vc->vsync_interval and vsync_interval should be the same value, but
actually vc->vsync_interval was updated after vsync_interval was
initialized. This was probably not intended. Fix this by removing the
duplicate local variable. There were probably no bad effects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This works only on X11, and only if the refresh rate changes due to the
window being moved to another screen (detected by us). It doesn't
include system screen reconfiguration yet.
This calls VOCTRL_GET_DISPLAY_FPS on every frame, which makes me uneasy.
It means extra thread communication with the win32 and Cocoa backends.
On the other hand, a frame doesn't happen _that_ often, and the
communication should still be pretty cheap and fast, so it's probably
ok.
Also needs some extra fuzz for vo_vdpau.c, because that does everything
differently.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Drop use of the ancient XF86VM, and use the slightly less ancient Xrandr
extension to retrieve the refresh rate. Xrandr has the advantage that it
supports multiple monitors (at least the modern version of it).
For now, we don't attempt any dynamic reconfiguration. We don't request
and listen to Xrandr events, and we don't notify the VO code of changes
in the refresh rate. (The later works by assuming that X coordinates map
directly to Xrandr coordinates, which probably is wrong with compositing
window manager, at least if these use complicated transformations. But I
know of no API to handle this.)
It would be nice to drop use of the Xinerama extension too, but
unfortunately, at least one EWMH feature uses Xinerama screen numbers,
and I don't know how that maps to Xrandr outputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
|
|
|
|
|
|
| |
Fixes #1007.
CC: @mpv-player/stable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
|
|
|
|
| |
This makes a certain corner case simpler at a later point.
|
|
|
|
|
|
|
|
|
|
|
|
| |
With software decoding, images were uploaded to vdpau surfaces as they
were queued to the VO. This makes it slightly more complicated
(especially later on), and has no advantages - so stop doing it.
The only reason why this was done explicitly was due to attempts to keep
the code equivalent (instead of risking performance regressions). The
original code did this naturally for certain reasons, but now that we
can measure that it has no advantages and just requires extra code, we
can just drop it.
|
|
|
|
| |
Basically a cosmetic change. This is probably more intuitive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
|
|
|
|
|
|
|
|
|
| |
Let the VOs draw the OSD on their own, instead of making OSD drawing a
separate VO driver call. Further, let it be the VOs responsibility to
request subtitles with the correct PTS. We also basically allow the VO
to request OSD/subtitles at any time.
OSX changes untested.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mpv supports two hardware decoding APIs on Linux: vdpau and vaapi. Each
of these has emulation wrappers. The wrappers are usually slower and
have fewer features than their native opposites. In particular the libva
vdpau driver is practically unmaintained.
Check the vendor string and print a warning if emulation is detected.
Checking vendor strings is a very stupid thing to do, but I find the
thought of people using an emulated API for no reason worse.
Also, make --hwdec=auto never use an API that is detected as emulated.
This doesn't work quite right yet, because once one API is loaded,
vo_opengl doesn't unload it, so no hardware decoding will be used if the
first probed API (usually vdpau) is rejected. But good enough.
|
|
|
|
|
|
|
|
|
|
| |
Integrate it with the existing surface allocator in vdpau.c. The changes
are a bit violent, because the vdpau API is so non-orthogonal: compared
to video surfaces, output surfaces use a different ID type, different
format types, and different API functions.
Also, introduce IMGFMT_VDPAU_OUTPUT for VdpOutputSurfaces wrapped in
mp_image, rather than hacking it. This is a bit cleaner.
|
|
|
|
|
|
| |
black_pixel is an (apparently necessary) 1x1 black surface used for
clearing the screen. It was allocated in RGB mode only, but is sometimes
used in YUV mode too.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the newly provided mp_vdpau_handle_preemption() function, instead of
accessing mp_vdpau_ctx fields directly. Will probably make multithreaded
access to the vdpau context easier.
Mostly unrelated to the actual changes, I've noticed that using hw
decoding with vo_opengl sometimes leads to segfaults inside of nvidia's
libGL when doing the following:
1. use hw decoding + vo_opengl
2. switch to console (will preempt on nvidia systems)
3. switch back to X (mpv will recover, switches to sw decoding)
4. enable hw decoding again
5. exit mpv
Then it segfaults when mpv finally calls exit(). I'll just blame nvidia,
although it seems likely that something in the gl_hwdec_vdpau.c
preemption handling triggers corner cases in nvidia's code.
|
|
|
|
| |
See previous commit.
|
|
|
|
|
|
|
| |
This was a minor code duplication between vf_vdpaupp.c and vo_vdpau.c.
(In theory, we could always require using vf_vdpaupp with vo_vdpau, but
I think it's better if vo_vdpau can work standalone.)
|
|
|
|
|
| |
Since vdpau_mixer.c initializes the YUV conversion using the mp_image
flags, these images should have all flags set properly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the special casing of vo_vdpau vs. other VOs. Replace the
complicated interaction between vo.c and vo_vdpau.c with a simple queue
in vo.c. VOs other than vdpau are handled by setting the length of the
queue to 1 (this is essentially what waiting_mpi was).
Note that vo_vdpau.c seems to have buffered only 1 or 2 frames into the
future, while the remaining 3 or 4 frames were past frames. So the new
code buffers 2 frames (vo_vdpau.c requests this queue length by setting
vo->max_video_queue to 2). It should probably be investigated why
vo_vdpau.c kept so many past frames.
The field vo->redrawing is removed. I'm not really sure what that would
be needed for; it seems pointless.
Future directions include making the interface between playloop and VO
simpler, as well as making rendering a frame a single operation, as
opposed to the weird 3-step sequence of rendering, drawing OSD, and
flipping.
|
| |
|
|
|
|
|
| |
This is a horrible hack to keep compatibility with the vo_vdpau deint
sub-option.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous commits changed vo_vdpau so that these options are set by
vf_vdpaupp, and the corresponding vo_vdpau were ignored. But for
compatibility, keep the "old" options working.
The value of this is questionable - maybe the vo_vdpau options should
just be removed. For now, at least demonstrate that it's possible.
The "deint" suboption still doesn't work, because the framerate doubling
logic required for some deint modes was moved to vf_vdpaupp. This
requires more elaborate workarounds.
|
|
|
|
| |
So a caller can override the filter options dictated by vf_vdpaupp.
|
|
|
|
|
|
|
|
|
|
| |
This is slightly incomplete: the mixer options, such as sharpen and
especially deinterlacing, are ignored. This also breaks automatic
enabling of interlacing with 'D' or --deinterlace. These issues will be
fixed later in the following commits.
Note that we keep all the custom vdpau queue stuff. This will also be
simplified later.
|
|
|
|
|
|
|
| |
In theory, returning the screenshot with original pixel aspect would
allow avoiding scaling them with image formats that support non-square
pixels, but in practice this isn't used anyway (nothing seems to
understand e.g. jpeg aspect ratio tags).
|
|
|
|
|
| |
Minor cleanup, so that we can stuff more information into
mp_image_params later.
|
|
|
|
|
|
|
|
|
|
| |
This might be a good idea in order to prevent queuing a frame too far in
the future (causing apparent freezing of the video display), or dropping
an infinite number of frames (also apparent as freezing).
I think at this point this is most of what we can do if the vdpau time
source is unreliable (like with Mesa). There are still inherent race
conditions which can't be fixed.
|
|
|
|
| |
This wasn't necessarily clear.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The strange thing about this code was the shift parameter of the
prev_vs2 function. The parameter is used to handle timestamps before the
last vsync, since the % operator handles negative values incorrectly.
Most callers set shift to 0, and _usually_ pass a timestamp after the
last vsync. One caller sets it to 16, and can pass a timestamp before
the last timestamp.
The mystery is why prev_vs2 doesn't just compensate for the % operator
semantics in the most simple way: if the result of the operator is
negative, add the divisor to it. Instead, it adds a huge value to it
(how huge is influenced by shift). If shift is 0, the result of the
function will not be aligned to vsyncs.
I have no idea why it was written in this way. Were there concerns about
certain numeric overflows that could happen in the calculations? But I
can't think of any (the difference between ts and vc->recent_vsync_time
is usually not that huge). Or is there something more clever about it,
which is important for the timing code? I can't think of anything
either.
So scrap it and simplify it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_vdpau used a somewhat complicated and fragile mechanism to convert
the vdpau time to internal mpv time. This was fragile as in it couldn't
deal well with Mesa's (apparently) random timestamps, which can change
the base offset in multiple situations. It can happen when moving the
mpv window to a different screen, and somehow it also happens when
pausing the player.
It seems this mechanism to synchronize the vdpau time is not actually
needed. There are only 2 places where sync_vdptime() is used (i.e.
returning the current vdpau time interpolated by system time).
The first call is for determining the PTS used to queue a frame. This
also uses convert_to_vdptime(). It's easily replaced by querying the
time directly, and adding the wait time to it (rel_pts_ns in the patch).
The second call is pretty odd: it updates the vdpau time a second time
in the same function. From what I can see, this can matter only if
update_presentation_queue_status() is very slow. I'm not sure what to
make out of this, because the call merely queries the presentation
queue. Just assume it isn't slow, and that we don't have to update the
time.
Another potential issue with this is that we call VdpPresentationQueueGetTime()
every frame now, instead of every 5 seconds and interpolating the other
calls via system time. More over, this is per video frame (which can be
portantially dropped, and not per actually displayed frame. Assume this
doesn't matter.
This simplifies the code, and should make it more robust on Mesa. But
note that what Mesa does is obviously insane - this is one situation
where you really need a stable time source. There are still plenty of
race condition windows where things can go wrong, although this commit
should drastically reduce the possibility of this.
In my tests, everything worked well. But I have no access to a Mesa
system with vdpau, so it needs testing by others.
See github issues #520, #694, #695.
|
|
|
|
| |
Might help to debug certain problems with Mesa.
|
|
|
|
|
|
|
|
|
| |
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
|
|
|
|
| |
There's no reason to. This is basically a cosmetic change.
|
|
|
|
|
|
| |
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
|
|
|
|
| |
Some drivers do not supply timestamps, use old timestamp in these conditions.
|
|
|
|
|
| |
When a time sync happens the last sync time is the minimum time that can be
used for presentation.
|
|
|
|
|
|
|
| |
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
|
|
|
|
|
|
|
|
|
|
|
| |
vo->aspdat is basically an outdated version of vo->params, plus some
weirdness. Get rid of it, which will allow further cleanups and which
will make multithreading easier (less state to care about).
Also, simplify some VO code by using mp_image_set_attributes() instead
of caring about display size, colorspace, etc. manually. Add the
function osd_res_from_image_params(), which is often needed in the case
OSD renders into an image.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do two things:
1. add locking to struct osd_state
2. make struct osd_state opaque
While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses
lots of osd_state (and osd_object) members. To make sure everything is
accessed synchronously, I prefer making osd_state opaque, even if it
means adding pretty dumb accessors.
All of this is meant to allow running VO in their own threads.
Eventually, VOs will request OSD on their own, which means osd_state
will be accessed from foreign threads.
|
|
|
|
|
| |
This never made any real sense; the "backend" has to access vo->dx/dy
anyway.
|
|
|
|
|
|
| |
Note that this will print a difference even with perfect sync, because
the code queues the frames _between_ vsync, probably for error margin
(though I don't understand why it uses the exact values chosen).
|
| |
|
| |
|
|
|
|
|
|
|
|
|
| |
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
|