| Commit message (Collapse) | Author | Age |
|
|
|
| |
Instead let it do its own event loop wakeup handling.
|
|
|
|
| |
Remove some indirections that aren't needed anymore.
|
|
|
|
| |
See previous commit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The vdpau_mixer could fail to be recreated properly if preemption
occured at some point before playback initialization (like when using
--hwdec-preload and the opengl-cb API).
Normally, the vdpau_mixer was supposed to be marked invalid when the
components using it detect a preemption, e.g. in hwdec_vdpau.c. This one
didn't mark the vdpau_mixer as invalid if preemption was detected in
reinit(), only in map_image().
It's cleaner to detect preemption directly in the vdpau_mixer, which
ensures it's always recreated correctly.
|
|
|
|
| |
This change helps avoiding conflict with talloc.h from libtalloc.
|
|
|
|
|
| |
Without display-sync mode, our guesses wrt. vsync phase etc. are much
worse, and I see no reason to keep the complicated "vsync_timed" code.
|
|
|
|
|
|
|
|
| |
They are evil and should be eradicated. Some of these were pretty dumb
anyway.
There are probably some more around in platform specific code or other
code not enabled by default on Linux.
|
|
|
|
|
| |
Apparently not all vdpau drivers in the wild support this format (VDPAU
SUNXI can't). Revert to RGB in these cases.
|
|
|
|
|
|
|
|
|
|
|
| |
This parameter has been unused for years (the last flag was removed in
commit d658b115). Get rid of it.
This affects the general VO API, as well as the vo_opengl backend API,
so it touches a lot of files.
The VOFLAGs are still used to control OpenGL context creation, so move
them to the OpenGL backend code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This gets rid of an old hack, VOFLAG_HIDDEN. Although handling of it has
been sane for a while, it used to cause much pain, and is still
unintuitive and weird even today.
The main reason for this hack is that OpenGL selects a X11 Visual for
you, and you're supposed to use this Visual when creating the X window
for the OpenGL context. Which means the X window can't be created early
in the common X11 init code, but the OpenGL code needs to do something
before that. API-wise you need separate functions for X11 init and X11
window creation. The VOFLAG_HIDDEN hack conflated window creation and
the entrypoint for resizing on video resolution change into one
function, vo_x11_config_vo_window(). This required all platform backends
to handle this flag, even if they didn't need this mechanism.
Wayland still uses this for minor reasons (alpha support?), so the
wayland backend must be changed before the flag can be entirely removed.
|
|
|
|
|
|
|
|
|
|
|
| |
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
|
|
|
|
|
|
|
|
|
|
|
| |
Pretty stupid: vo_get_vsync_interval() returns a negative value if the
display FPS is unknown (e.g. xrandr not compiled), and the comparison
whether the value is below 0 fails later because it's assigned to an
unsigned int.
Regression since commit e3d85ad4.
Also, fix some comments in vo.c.
|
|
|
|
|
|
|
|
|
|
| |
Instead of calling it "future frames" and adding or subtracting 1 from
it, always call it "requested frames". This simplifies it a bit.
MPContext.next_frames had 2 added to it; this was mainly to ensure a
minimum size of 2. Drop it and assume VO_MAX_REQ_FRAMES is at least 2;
together with the other changes, this can be the exact size of the
array.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
VDPAU has explicit support for rotating surfaces, and it is far less
expensive than using the normal rotation filter (which would require
reading video frames back into system memory), it is desirable to
implement the VO rotation capability.
To do this, we need to render the video frames to an output surface,
without rotation, and then render from that surface to the final
output surface to apply the rotation. It is important that the
intermediate surface is the same size as the final one (only not
rotated) so that hqscaling can be applied if requested by the user.
(hqscaling is a mixer capability and so takes effect when the video
surface is rendered to an output surface)
Finally, we must remember to explicitly clear the final output
surface as VDPAU only auto-clears output surfaces when rendering video
surfaces.
|
|
|
|
|
| |
The value 1 is useful in some contexts, but not such a good choice
otherwise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
draw_image_timed is renamed to draw_frame. struct frame_timing is
renamed to vo_frame. flip_page_timed is merged into draw_frame (the
additional parameters are part of struct vo_frame). draw_frame also
deprecates VOCTRL_REDRAW_FRAME, and replaces it with a method that
works for both VOs which can cache the current frame, and VOs which
need to redraw it anyway.
This is preparation to making the interpolation and (work in progress)
display sync code saner.
Lots of other refactoring, and also some simplifications.
|
|
|
|
|
|
|
|
|
|
| |
Now the VO can request a number of future frames with the last parameter
of vo_set_queue_params(). This will be helpful to fix the interpolation
code.
Note that the first frame (after playback start or seeking) will usually
not have any future frames (to make seeking fast). Near the end of the
file, the number of future frames will become lower as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using --hwdec=auto, about half of all systems will print:
"[vdpau] Error when calling vdp_device_create_x11: 1"
this happens because usually mpv will be linked against both vdpau and
vaapi libs, but the drivers are not necessarily available. Then trying
to load a driver will fail. This is a normal part of probing, but the
error messages were printed anyway. Silence them by explicitly
distinguishing probing.
This pretty much goes through all the layers. We actually consider
loading hw backends for vo_opengl always "auto probed", even if a hw
backend is explicitly requested. In this case vd_lavc will print a
warning message anyway (adjust this message a bit).
|
|
|
|
|
|
|
|
| |
read_output_surface() could fail and return NULL.
Also, make sure we don't set the image to a size larger than the
allocated size. Normally this shouldn't happen, but in theory it could
in corner cases; this is for robustness.
|
|
|
|
|
|
| |
We can't do much in this case, but at least we can not call the vdpau
API functions with too large sizes. Apparently the API considers this
undefined behavior, and random stuff might happen.
|
|
|
|
|
|
|
| |
The previous code was not wrong, but I'd claim this makes the code more
robust. If a situation could happen in which the passed surface size is
incorrect, we could have passed a too small image, and
VdpOutputSurfaceGetBitsNative could have randomly overwritten memory.
|
|
|
|
| |
Why should I be required to type so much?
|
|
|
|
|
|
|
|
|
| |
Check the maximum size of video surfaces, and refuse initialization if
the video is too large for them.
Maybe we could do something more sophisticated, like inserting a
software scaler. On the other hand, this would have a very questionable
benefit, as it would be guaranteed to be too slow.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Always configure the vdpau mixer based on the current surface sent to
it. Before this, we just hardcoded the chroma type, and the surface size
was essentially a guess.
Calling VdpVideoSurfaceGetParameters() on every surface is a bit
suspicious, but it appears it's a cheap function (just requiring some
locks and a table lookup). This way we avoid creating another
complicated mechanism to carry around the actual surface parameters
with a mp_image/AVFrame.
|
|
|
|
|
|
|
| |
I think this used to be quite important, because the ancient VfW support
in MPlayer used to output flipped frames. This code has been dead in mpv
for quite some time (because VfW decoders were removed, and the --flip
option was dropped too), so get rid of it.
|
|
|
|
| |
Signed-off-by: wm4 <wm4@nowhere>
|
|
|
|
|
|
|
| |
Use variants without alpha.
I skipped vo_sdl, because format selection seems a bit more complicated
here, and nobody cares about vo_sdl anymore.
|
|
|
|
|
|
|
|
| |
Rarely used and essentially useless. The only VO for which this was
implemented correctly and for which this did anything was vo_xv, but you
shouldn't use vo_xv anyway (plus it support BT.601 only, plus a vendor
specific extension for BT.709, whose presence this function essentially
reported - use xvinfo instead).
|
|
|
|
|
| |
The way-too-big API call for clearing the screen can be easily shared
between two completely different codepaths.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was a somewhat obscure optimization in the OSD and subtitle
rendering path: if only the position of the sub-images changed, and not
the actual image data, uploading of the image data could be skipped. In
theory, this could speed up things like scrolling subtitles.
But it turns out that even in the rare cases subtitles have such scrolls
or axis-aligned movement, modern libass rarely signals this kind of
change. Possibly this is because of sub-pixel handling and such, which
break this.
As such, it's a worthless optimization and just introduces additional
complexity and subtle bugs (especially in cases libass does the
opposite: incorrectly signaling a position change only, which happened
before). Remove this optimization, and rename bitmap_pos_id to
change_id.
|
|
|
|
|
|
|
|
|
| |
This warning wasn't overly helpful in the past, and warned against
perfectly fine code. But at least with recent gcc versions, this is the
warning that complains about assignments in if expressions (why???), so
we want to enable it.
Also change all the code this warning complains about for no reason.
|
|
|
|
| |
No change in behavior.
|
|
|
|
| |
This is already done in the common vo.c code.
|
|
|
|
|
|
|
|
|
|
|
| |
At the time screenshot support was added, images weren't refcounted yet,
so screenshots required specialized implementations in the VOs. But now
we can handle these things much simpler. Also see commit 5bb24980.
If there are VOs in the future which can't do this (e.g. they need to
write to the image passed to vo_driver->draw_image), this still could be
disabled on a per-VO basis etc., so we lose no potential performance
advantages.
|
|
|
|
|
|
|
|
|
| |
Use different VOCTRLs for "window" and normal screenshot modes. The
normal one will probably be removed, and replaced by generic code in
vo.c, and this commit is preparation for this. (Doing it the other way
around would be slightly simpler, but I haven't decided yet about the
second one, and touching every VO is needed anyway in order to remove
the unneeded crap. E.g. has_osd has been unused for a long time.)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo.c queried the VO at initialization whether it wants to be updated on
every display frame, or every video frame. If the smoothmotion option
was changed at runtime, the rendering mode in vo.c wasn't updated.
Just let vo_opengl set the mode directly. Abuse the existing
vo_set_flip_queue_offset() function for this.
Also add a comment suggesting the use of --display-fps to the manpage,
which doesn't have anything to do with the rest of this commit, but is
important to make smoothmotion run well.
|
|
|
|
|
|
| |
There was a case when we could have rendered to an output surface while
it's still used for display. Not sure why the API doesn't do this
automatically.
|
|
|
|
|
|
|
|
| |
Instead of converting the hw surface to an image in the VO, provide a
generic way to convet hw surfaces, and use this in the screenshot code.
It's all relatively straightforward, except vdpau is being terrible. It
needs a huge chunk of new code, because copying back is not simple.
|
|
|
|
|
|
|
|
|
|
|
| |
Before this commit, each hw backend had their own specific struct types
for context, and some, like VDA, had none at all. Add a context struct
(mp_hwdec_ctx) that provides a somewhat generic way to pass the hwdec
context around. Some things get slightly better, some slightly more
verbose.
mp_hwdec_info is still around; it's still needed, but is reduced to its
role of handling delayed loading of the hwdec backend.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And remove all uses of the VFCAP_CSP_SUPPORTED* constants. This is
supposed to reduce conversions if many filters are used (with many
incompatible pixel formats), and also for preferring the VO's natively
supported pixel formats (as opposed to conversion).
This is worthless by now. Not only do the main VOs not use software
conversion, but also the way vf_lavfi and libavfilter work mostly break
the way the old MPlayer mechanism worked. Other important filters like
vf_vapoursynth do not support "proper" format negotation either.
Part of this was already removed with the vf_scale cleanup from today.
While I'm touching every single VO, also fix the query_format argument
(it's not a FourCC anymore).
|
|
|
|
|
|
|
|
|
| |
Commit d38bc531 is incorrect: the 50ms queue-ahead value and the flip
queue offset have different functions. The latter is about calling
flip_page in advance, so the change attempted to show video frames 50ms
in advance on all VOs.
The change was for vo_opengl_cb, but that can be handled differently.
|
|
|
|
|
|
| |
A small refactor; shouldn't change any behavior.
Do this so immediate display can be achieved.
|
|
|
|
|
|
|
|
|
| |
Same as with the previous commits.
In theory, vdpau/x11 GL interop doesn't assume GLX. It could use EGL as
well. But since it's always GLX in practice, so we're fine with this.
Remove the gl_hwdec.mpgl field - it's unused now.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a generic mechanism to the VO to relay "extra" events from VO to
player. Use it to notify the core of window resizes, which in turn will
be used to mark all affected properties ("window-scale" in this case) as
changed.
(I refrained from hacking this as internal command into input_ctx, or to
poll the state change, etc. - but in the end, maybe it would be best to
actually pass the client API context directly to the places where events
can happen.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At least on kwin, we decide to proceed without waiting for the window
being mapped (due to the frame exts hack, see commit 8c002b79). But that
leaves us with a window size of 0x0, which causes VdpOutputSurfaceCreate
to fail. This prints some warnings, although vo_vdpau recovers later and
this has no other bad consequences.
Do the following things to deal with this:
- set the "known" window size to the suggested window size before the
window is even created
- allow calling XGetGeometry on the window even if the window is not
mapped yet (this should work just fine)
- make the output surface minimum size 1x1
Strictly speaking, only one of these would be required to make the
warning disappear, but they're all valid changes and increase robustness
and correctness. At no point we use a window size of 0x0 as magic value
for "unset" or unknown size, so keeping it unset has no purpose anyway.
CC: @mpv-player/stable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_vdpau uses its own framedrop code, mostly for historic reasons. It
has some tricky heuristics, of which I'm not sure how they work, or if
they have any effect at all, but in any case, I want to keep this code
for now. One day it might get fully ported to the vo.c framedrop code,
or just removed.
But improve its interaction with the user-visible framedrop controls.
Make --framedrop actually enable and disable the vo_vdpau framedrop
code, and increment the number of dropped frames correctly.
The code path for other VOs should be equivalent. The vo_vdpau behavior
should, except for the improvements mentioned above, be mostly
equivalent as well. One minor change is that frames "shown" during
preemption are always count as dropped.
Remove the statement from the manpage that vo_vdpau is the default; this
hasn't been the case for a while.
|
|
|
|
|
|
|
| |
vc->vsync_interval and vsync_interval should be the same value, but
actually vc->vsync_interval was updated after vsync_interval was
initialized. This was probably not intended. Fix this by removing the
duplicate local variable. There were probably no bad effects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This works only on X11, and only if the refresh rate changes due to the
window being moved to another screen (detected by us). It doesn't
include system screen reconfiguration yet.
This calls VOCTRL_GET_DISPLAY_FPS on every frame, which makes me uneasy.
It means extra thread communication with the win32 and Cocoa backends.
On the other hand, a frame doesn't happen _that_ often, and the
communication should still be pretty cheap and fast, so it's probably
ok.
Also needs some extra fuzz for vo_vdpau.c, because that does everything
differently.
|