| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All relevant authors have agreed.
There are two exceptions, patches by authors who could not be reached.
This commit tries to remove their copyright.
a0f08fbe: messes with the seeking code corner cases. The EOF flag logic
was changed at some point, and always had a flaky history (see e.g.
347cf972 50274ca3 70411f27 5999efb9 0d5e6084 ff08d0c3 2e2f77e3 de5566f0
9554a844, all which happened after that patch, MPlayer ones without that
patch). I claim that all of the copyright the patch might have added is
gone. Except the message in stream_seek(), which this commit removes.
The other code removed/changed in stream_seek() is probably not from
that patch, but it doesn't hurt to be sure, and also makes it more
readable. (It might change the behavior so that sometimes the eof flag
is set after a seek, but it doesn't matter here.)
2aa6acd9: it looks like the seek_forward() modified by this patch was
later moved to stream.c and renamed to stream_skip_read() in a790f2133.
(Looking closer at it, it was actually modified again a bunch of times,
fixing the logic.) I rewrote it in this commit. The code ended up rather
similar, which probably could lead to doubts whether this was done
properly, but I guess the reader of this will just have to believe me. I
knew what stream_skip_read() was supposed to do (which was reinforced
when I tried to replace it on the caller side), without reading the
pre-existing code in detail. I had to "relearn" the logic how buf_pos
and bug_len work - it was actually easy to see from stream_read_char()
how to skip the data, essentially by generalizing its logic from 1 byte
to N bytes. From the old code I only "used" the fact that it's obviously
a while(len>0) look, that has to call stream_fill_buffer repeatedly to
make progress. At first I actually didn't use stream_fill_buffer_by(),
but the variant without _by, but readded it when I checked why the old
code used it (see cd7ec016e7). This has to be good enough. In the end,
it's hard to argue that this could be implemented in a way not using
such a loop.
Other than this, I could add the usual remarks about how this code was
not modularized in the past, and how stream.c contained DVD code, and
how this was later modularized, moving the copyright to other files, and
so on. Also, if someone wrote a stream module, and was not asked about
LGPL relicensing, we don't consider the entry in stream_list[]
copyrightable.
|
| |
|
|
|
|
|
|
|
| |
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
|
| |
|
|
|
|
|
|
| |
"uncached_stream" is a pretty bad name. It could be mistaken for a
boolean, and then its meaning would be inverted. Rename it.
Also add a "caching" field, which signals that the stream is a cache or
reads from a cache. This is easier to understand and more flexible.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
|
| |
|
|
| |
Quite irresponsibly hacked together. Sue me.
|
| |
|
|
|
|
|
|
|
|
| |
This has all been made unnecessary recently. The change not to copy the
global option struct in particular can be made because now nothing
accesses the global options anymore in the demux and stream layers.
Some code that was accidentally added/changed in commit 5e30e7a0 is also
removed, because it was simply committed accidentally, and was never
used.
|
| |
|
|
|
|
| |
Same deal as with stream_bluray.
Untested because I don't give a fuck about your shitty DVDs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
|
| |
|
|
|
|
| |
Based on #2630. Some heavy changes by committer.
Signed-off-by: wm4 <wm4@nowhere>
|
| |
|
|
|
|
|
|
| |
Instead of having a separate for each, which also requires separate
additional caching in the demuxer. (The demuxer adds an indirection,
since STREAM_CTRLs are not thread-safe.)
Since this includes the cache speed, this should fix #3003.
|
| |
|
|
|
|
|
| |
Should reflect I/O speed.
This could go into the terminal status line. But I'm not sure how to put
it there, since it already uses too much space, so it's not there yet.
|
| |
|
|
| |
Went way with DVD/BD menu support.
|
| |
|
|
| |
Will be used in a following commit.
|
| |
|
|
|
|
|
|
|
| |
On read, it returns the name of the current DVB program,
on write, it triggers a channel-switch to the program
if it is found in the channel list of the currently active card.
Compared to the dvb-channel property which already exists
and is a pair of integers (card + channel number) this has the limitation
of not switching the card, but is probably of much more common use.
|
| |
|
|
|
| |
And use it everywhere, instead of retrieving the size manually. Slight
simplification.
|
| | |
|
| | |
|
| |
|
|
| |
Fixes #1972.
|
| |
|
|
|
|
|
|
|
|
|
| |
If a directory is encountered, replace it with its contents in the
internal playlist.
This is messed into demux_playlist.c, because why not. STREAMTYPE_DIR
could be avoided by unconditonally trying opendir() in demux_playlist.c,
but it seems nicer not to do weird things like calling it on real files.
This does not work on Windows, because msvcrt is retarded.
|
| |
|
|
| |
Signed-off-by: wm4 <wm4@nowhere>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
It was possible to make the player play local files by putting rar://
links into remote playlists, and some other potentially unsafe things.
Redo the handling of it. Now the rar-redirector (the thing in
demux_playlist.c) sets disable_safety, which makes the player open any
playlist entries returned. This is fine, because it redirects to the
same file anyway (just with different selection/interpretation of the
contents). On the other hand, rar:// itself is now considered fully
unsafe, which means that it is ignored if found in normal playlists.
|
| |
|
|
| |
Unused since the previous commit. (Apparently it was a stupid idea.)
|
| |
|
|
|
|
|
|
| |
Most things stopped using this field for better support of growing
files. Go through the trouble to repalce the remaining uses, so it can
be removed.
Also move the "streaming" field; saves 4 bytes (wow!).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix return types and return values to make them more consistent. Some
reformatting and making code more concise.
In stream_reconnect(), avoid the additional mp_cancel_test() call by
moving the "connection lost" message below the mp_cancel_wait() call,
which effectively leads to the same behavior when the stream was already
canceled. (The goal is not to show the message in this case.)
Merge stream_seek_long() into stream_seek(). It was the only caller.
Always clear the eof flag on seeks.
Reduce access to stream internals in cache.c and stream_lavf.c.
|
| |
|
|
|
| |
Wait for a longer time between reconnects. Introdeuce and use
mp_cancel_wait(), so that quitting is still immediate.
|
| |
|
|
|
| |
A small cosmetic change with the effect that pressing 'k' shows
"unavailable" instead of "error" (even if no TV code is active).
|
| |
|
|
|
|
|
|
|
| |
This was requested.
It seems libdvdread can't get the duration for titlesets other than the
currently opened title. The data structures contain dangling pointers
for these, and MPlayer works this around by opening every title
separately for the purpose of dumping the title list.
|
| |
|
|
| |
Remove the ones which are not strictly needed.
|
| |
|
|
|
| |
This will be used in the following commit to cancel subprocesses started
by Lua.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Basically, this will mark the demuxer as seekable with rtmp* and mmsh
protocols. These protocols have network-level time seeking, and whether
you can seek on the byte level does not matter.
Until now, seeking was typically only enabled because of the cache, and
a (nonsensical) warning was shown accordingly.
It still could happen that the server doesn't actually support thse
requests (or simply rejects them), so this is somewhat imperfect.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because 1) Lua is terrible, and 2) popen() is terrible. Unfortunately,
since Unix is also terrible, this turned out more complicated than I
hoped. As a consequence and to avoid that this code has to be maintained
forever, add a disclaimer that any function in Lua's utils module can
disappear any time. The complexity seems a bit ridiculous, especially
for a feature so far removed from actual video playback, so if it turns
out that we don't really need this function, it will be dropped again.
The motivation for this commit is the same as with 8e4fa5fc.
Note that there is an "#ifndef __GLIBC__". The GNU people are very
special people and thought it'd be convenient to actually declare
"environ", even though the POSIX people, which are also very special
people, state that no header declares this and that the user has to
declare this manually. Since the GNU people overtook the Unix world with
their very clever "embrace, extend, extinguish" strategy, but not 100%,
and trying to build without _GNU_SOURCE is hopeless; but since there
might be Unix environments which support _GNU_SOURCE features partially,
this means that in practice "environ" will be randomly declared or not
declared by system headers. Also, gcc was written by very clever people
too, and prints a warning if an external variable is declared twice (I
didn't check, but I suppose redeclaring is legal C, and not even the gcc
people are clever enough to only warn against a definitely not legal C
construct, although sometimes they do this), ...and since we at mpv hate
compiler warnings, we seek to silence them all. Adding a configure test
just for a warning seems too radical, so we special-case this against
__GLIBC__, which is hopefully not defined on other libcs, especially not
libcs which don't implement all aspects of _GNU_SOURCE, and redefine
"environ" on systems even if the headers define it already (because they
support _GNU_SOURCE - as I mentioned before, the clever GNU people wrote
software THAT portable that other libcs just gave up and implemented
parts of _GNU_SOURCE, although probably not all), which means that
compiling mpv will print a warning about "environ" being redefined, but
at least this won't happen on my system, so all is fine. However, should
someone complain about this warning, I will force whoever complained
about this warning to read this ENTIRE commit message, and if possible,
will also force them to eat a printed-out copy of the GNU Manifesto, and
if that is not enough, maybe this person could even be forced to
convince the very clever POSIX people of not doing crap like this:
having the user to manually declare somewhat central symbols - but I
doubt it's possible, because the POSIX people are too far gone and only
care about maintaining compatibility with old versions of AIX and HP-UX.
Oh, also, this code contains some subtle and obvious issues, but writing
about this is not fun.
|
| |
|
|
|
|
|
|
|
|
|
| |
Normally, we pass libavformat demuxers a wrapped mpv stream. But in some
cases, such as HLS and RTSP, we let libavformat open the stream itself.
In these cases, set typical network properties like useragent according
to the mpv options.
(We still don't set it for the cases where libavformat opens other
streams on its own, e.g. when opening the companion .sub file for .idx
files - not sure if we maybe should always set these options.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
stream_dvd.c includes a pseudo-protocol that recognizes .IFO files, and
plays them using libdvdread. This was relatively lazy, and could perhaps
easily trigger with files that just had the .ifo extension.
Make the checks stricter, and even probe the file header. Apparently the
first bytes in an .ifo file are always "DVDVIDEO-VTS", so check for
this.
Refuse to load the main "video_ts.ifo". The plan is to use stream_dvdnav
for it.
This also removes at least 1 memory leak.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
|
| |
|
|
|
|
|
|
| |
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
|
| |
|
|
|
|
|
|
|
| |
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
|
| |
|
|
|
|
|
|
|
| |
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This didn't work, because the timebase was wrong. According to the
ffmpeg doxygen, if the stream index is -1 (which is what we used), the
timebase is AV_TIME_BASE. But this didn't work, and it really expected
the stream's timebase. Quite "surprising", since this feature
(avio_seek_time) is used by rtmp only.
Fixing this properly is too hard, so hack-fix our way around it.
STREAM_CTRL_SEEK_TO_TIME is also used by DVD/BD, so a new
STREAM_CTRL_AVSEEK is added. We simply pass-through the request
verbatim.
|
| |
|
|
|
|
| |
This reverts commit 4b93210e0c244a65ef10a566abed2ad25ecaf9a1.
*shrug*
|
| |
|
|
| |
It never worked well. Just remux your DVD and BD images to mkv.
|
| |
|
|
| |
demux_disc.c takes care of this now.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
|
| | |
|
| |
|
|
|
|
|
|
|
| |
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
|
| |
|
|
|
| |
Remove unused stream type constants. Move some now DVD specific crap
to stream_dvd.c.
|
| |
|
|
|
|
|
| |
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Usually, each stream driver declares the size and option list of its
private data. This was pretty natural for when most streams still used
global variables to setup their defaults. They did by pointing
priv_defaults to the (mutable) struct containing the option values. But
falls short when storing the option values in MPOpts. So provide a
somewhat inelegant but simple way to let the stream implementation setup
the priv struct at initialization time.
This is done with the get_defaults callback. It should return a copy of
the struct used in MPOpts. (A copy, because if MPOpts is changed, string
fields might be deallocated, and if that field is not described by
stream_info.options, it won't be copied on init.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
|
wm4
Aman Gupta
Oliver Freyermuth
Niklas Haas
Marcin Kurczewski
James Ross-Gowan
Alessandro Ghedini