diff options
99 files changed, 9883 insertions, 508 deletions
diff --git a/.travis.yml b/.travis.yml index de40453b06..c626242557 100644 --- a/.travis.yml +++ b/.travis.yml @@ -20,7 +20,8 @@ env: - CONFIG=opt TEST=sanity JOBS=1 - CONFIG=gcov TEST=c JOBS=16 - CONFIG=gcov TEST=c++ JOBS=16 - - CONFIG=opt TEST="c c++" JOBS=16 + - CONFIG=opt TEST=c JOBS=16 + - CONFIG=opt TEST=c++ JOBS=16 - CONFIG=opt TEST=node JOBS=16 - CONFIG=opt TEST=ruby JOBS=16 - CONFIG=opt TEST=python JOBS=1 @@ -1073,6 +1073,7 @@ chttp2_socket_pair_with_grpc_trace_server_finishes_request_unsecure_test: $(BIND chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test: $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test: $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test: $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test +connection_prefix_bad_client_test: $(BINDIR)/$(CONFIG)/connection_prefix_bad_client_test run_dep_checks: $(OPENSSL_ALPN_CHECK_CMD) || true @@ -1155,13 +1156,13 @@ plugins: $(PROTOC_PLUGINS) privatelibs: privatelibs_c privatelibs_cxx -privatelibs_c: $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util_unsecure.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fake_security.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fullstack_uds_posix.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_simple_ssl_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_simple_ssl_with_oauth2_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair_one_byte_at_a_time.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair_with_grpc_trace.a $(LIBDIR)/$(CONFIG)/libend2end_test_bad_hostname.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_accept.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_accept_and_writes_closed.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_invoke.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_before_invoke.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_in_a_vacuum.a $(LIBDIR)/$(CONFIG)/libend2end_test_census_simple_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_disappearing_server.a $(LIBDIR)/$(CONFIG)/libend2end_test_early_server_shutdown_finishes_inflight_calls.a $(LIBDIR)/$(CONFIG)/libend2end_test_early_server_shutdown_finishes_tags.a $(LIBDIR)/$(CONFIG)/libend2end_test_empty_batch.a $(LIBDIR)/$(CONFIG)/libend2end_test_graceful_server_shutdown.a $(LIBDIR)/$(CONFIG)/libend2end_test_invoke_large_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_max_concurrent_streams.a $(LIBDIR)/$(CONFIG)/libend2end_test_max_message_length.a $(LIBDIR)/$(CONFIG)/libend2end_test_no_op.a $(LIBDIR)/$(CONFIG)/libend2end_test_ping_pong_streaming.a $(LIBDIR)/$(CONFIG)/libend2end_test_registered_call.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_binary_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_payload_and_call_creds.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_trailing_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_with_large_metadata.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_with_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_server_finishes_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_delayed_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_request_with_high_initial_sequence_number.a $(LIBDIR)/$(CONFIG)/libend2end_certs.a +privatelibs_c: $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util_unsecure.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fake_security.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_fullstack_uds_posix.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_simple_ssl_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_simple_ssl_with_oauth2_fullstack.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair_one_byte_at_a_time.a $(LIBDIR)/$(CONFIG)/libend2end_fixture_chttp2_socket_pair_with_grpc_trace.a $(LIBDIR)/$(CONFIG)/libend2end_test_bad_hostname.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_accept.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_accept_and_writes_closed.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_after_invoke.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_before_invoke.a $(LIBDIR)/$(CONFIG)/libend2end_test_cancel_in_a_vacuum.a $(LIBDIR)/$(CONFIG)/libend2end_test_census_simple_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_disappearing_server.a $(LIBDIR)/$(CONFIG)/libend2end_test_early_server_shutdown_finishes_inflight_calls.a $(LIBDIR)/$(CONFIG)/libend2end_test_early_server_shutdown_finishes_tags.a $(LIBDIR)/$(CONFIG)/libend2end_test_empty_batch.a $(LIBDIR)/$(CONFIG)/libend2end_test_graceful_server_shutdown.a $(LIBDIR)/$(CONFIG)/libend2end_test_invoke_large_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_max_concurrent_streams.a $(LIBDIR)/$(CONFIG)/libend2end_test_max_message_length.a $(LIBDIR)/$(CONFIG)/libend2end_test_no_op.a $(LIBDIR)/$(CONFIG)/libend2end_test_ping_pong_streaming.a $(LIBDIR)/$(CONFIG)/libend2end_test_registered_call.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_binary_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_payload_and_call_creds.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_response_with_trailing_metadata_and_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_with_large_metadata.a $(LIBDIR)/$(CONFIG)/libend2end_test_request_with_payload.a $(LIBDIR)/$(CONFIG)/libend2end_test_server_finishes_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_delayed_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_request.a $(LIBDIR)/$(CONFIG)/libend2end_test_simple_request_with_high_initial_sequence_number.a $(LIBDIR)/$(CONFIG)/libend2end_certs.a $(LIBDIR)/$(CONFIG)/libbad_client_test.a -privatelibs_cxx: $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libinterop_client_helper.a $(LIBDIR)/$(CONFIG)/libinterop_client_main.a $(LIBDIR)/$(CONFIG)/libinterop_server_helper.a $(LIBDIR)/$(CONFIG)/libinterop_server_main.a $(LIBDIR)/$(CONFIG)/libqps.a +privatelibs_cxx: $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libinterop_client_helper.a $(LIBDIR)/$(CONFIG)/libinterop_client_main.a $(LIBDIR)/$(CONFIG)/libinterop_server_helper.a $(LIBDIR)/$(CONFIG)/libinterop_server_main.a $(LIBDIR)/$(CONFIG)/libqps.a buildtests: buildtests_c buildtests_cxx -buildtests_c: privatelibs_c $(BINDIR)/$(CONFIG)/alarm_heap_test $(BINDIR)/$(CONFIG)/alarm_list_test $(BINDIR)/$(CONFIG)/alarm_test $(BINDIR)/$(CONFIG)/alpn_test $(BINDIR)/$(CONFIG)/bin_encoder_test $(BINDIR)/$(CONFIG)/census_hash_table_test $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_circular_buffer_test $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_test $(BINDIR)/$(CONFIG)/census_statistics_performance_test $(BINDIR)/$(CONFIG)/census_statistics_quick_test $(BINDIR)/$(CONFIG)/census_statistics_small_log_test $(BINDIR)/$(CONFIG)/census_stub_test $(BINDIR)/$(CONFIG)/census_window_stats_test $(BINDIR)/$(CONFIG)/chttp2_status_conversion_test $(BINDIR)/$(CONFIG)/chttp2_stream_encoder_test $(BINDIR)/$(CONFIG)/chttp2_stream_map_test $(BINDIR)/$(CONFIG)/dualstack_socket_test $(BINDIR)/$(CONFIG)/fd_posix_test $(BINDIR)/$(CONFIG)/fling_client $(BINDIR)/$(CONFIG)/fling_server $(BINDIR)/$(CONFIG)/fling_stream_test $(BINDIR)/$(CONFIG)/fling_test $(BINDIR)/$(CONFIG)/gpr_cancellable_test $(BINDIR)/$(CONFIG)/gpr_cmdline_test $(BINDIR)/$(CONFIG)/gpr_env_test $(BINDIR)/$(CONFIG)/gpr_file_test $(BINDIR)/$(CONFIG)/gpr_histogram_test $(BINDIR)/$(CONFIG)/gpr_host_port_test $(BINDIR)/$(CONFIG)/gpr_log_test $(BINDIR)/$(CONFIG)/gpr_slice_buffer_test $(BINDIR)/$(CONFIG)/gpr_slice_test $(BINDIR)/$(CONFIG)/gpr_string_test $(BINDIR)/$(CONFIG)/gpr_sync_test $(BINDIR)/$(CONFIG)/gpr_thd_test $(BINDIR)/$(CONFIG)/gpr_time_test $(BINDIR)/$(CONFIG)/gpr_tls_test $(BINDIR)/$(CONFIG)/gpr_useful_test $(BINDIR)/$(CONFIG)/grpc_base64_test $(BINDIR)/$(CONFIG)/grpc_byte_buffer_reader_test $(BINDIR)/$(CONFIG)/grpc_channel_stack_test $(BINDIR)/$(CONFIG)/grpc_completion_queue_test $(BINDIR)/$(CONFIG)/grpc_credentials_test $(BINDIR)/$(CONFIG)/grpc_json_token_test $(BINDIR)/$(CONFIG)/grpc_stream_op_test $(BINDIR)/$(CONFIG)/hpack_parser_test $(BINDIR)/$(CONFIG)/hpack_table_test $(BINDIR)/$(CONFIG)/httpcli_format_request_test $(BINDIR)/$(CONFIG)/httpcli_parser_test $(BINDIR)/$(CONFIG)/httpcli_test $(BINDIR)/$(CONFIG)/json_rewrite $(BINDIR)/$(CONFIG)/json_rewrite_test $(BINDIR)/$(CONFIG)/json_test $(BINDIR)/$(CONFIG)/lame_client_test $(BINDIR)/$(CONFIG)/message_compress_test $(BINDIR)/$(CONFIG)/multi_init_test $(BINDIR)/$(CONFIG)/murmur_hash_test $(BINDIR)/$(CONFIG)/no_server_test $(BINDIR)/$(CONFIG)/poll_kick_posix_test $(BINDIR)/$(CONFIG)/resolve_address_test $(BINDIR)/$(CONFIG)/secure_endpoint_test $(BINDIR)/$(CONFIG)/sockaddr_utils_test $(BINDIR)/$(CONFIG)/tcp_client_posix_test $(BINDIR)/$(CONFIG)/tcp_posix_test $(BINDIR)/$(CONFIG)/tcp_server_posix_test $(BINDIR)/$(CONFIG)/time_averaged_stats_test $(BINDIR)/$(CONFIG)/time_test $(BINDIR)/$(CONFIG)/timeout_encoding_test $(BINDIR)/$(CONFIG)/timers_test $(BINDIR)/$(CONFIG)/transport_metadata_test $(BINDIR)/$(CONFIG)/transport_security_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test +buildtests_c: privatelibs_c $(BINDIR)/$(CONFIG)/alarm_heap_test $(BINDIR)/$(CONFIG)/alarm_list_test $(BINDIR)/$(CONFIG)/alarm_test $(BINDIR)/$(CONFIG)/alpn_test $(BINDIR)/$(CONFIG)/bin_encoder_test $(BINDIR)/$(CONFIG)/census_hash_table_test $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_circular_buffer_test $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_test $(BINDIR)/$(CONFIG)/census_statistics_performance_test $(BINDIR)/$(CONFIG)/census_statistics_quick_test $(BINDIR)/$(CONFIG)/census_statistics_small_log_test $(BINDIR)/$(CONFIG)/census_stub_test $(BINDIR)/$(CONFIG)/census_window_stats_test $(BINDIR)/$(CONFIG)/chttp2_status_conversion_test $(BINDIR)/$(CONFIG)/chttp2_stream_encoder_test $(BINDIR)/$(CONFIG)/chttp2_stream_map_test $(BINDIR)/$(CONFIG)/dualstack_socket_test $(BINDIR)/$(CONFIG)/fd_posix_test $(BINDIR)/$(CONFIG)/fling_client $(BINDIR)/$(CONFIG)/fling_server $(BINDIR)/$(CONFIG)/fling_stream_test $(BINDIR)/$(CONFIG)/fling_test $(BINDIR)/$(CONFIG)/gpr_cancellable_test $(BINDIR)/$(CONFIG)/gpr_cmdline_test $(BINDIR)/$(CONFIG)/gpr_env_test $(BINDIR)/$(CONFIG)/gpr_file_test $(BINDIR)/$(CONFIG)/gpr_histogram_test $(BINDIR)/$(CONFIG)/gpr_host_port_test $(BINDIR)/$(CONFIG)/gpr_log_test $(BINDIR)/$(CONFIG)/gpr_slice_buffer_test $(BINDIR)/$(CONFIG)/gpr_slice_test $(BINDIR)/$(CONFIG)/gpr_string_test $(BINDIR)/$(CONFIG)/gpr_sync_test $(BINDIR)/$(CONFIG)/gpr_thd_test $(BINDIR)/$(CONFIG)/gpr_time_test $(BINDIR)/$(CONFIG)/gpr_tls_test $(BINDIR)/$(CONFIG)/gpr_useful_test $(BINDIR)/$(CONFIG)/grpc_base64_test $(BINDIR)/$(CONFIG)/grpc_byte_buffer_reader_test $(BINDIR)/$(CONFIG)/grpc_channel_stack_test $(BINDIR)/$(CONFIG)/grpc_completion_queue_test $(BINDIR)/$(CONFIG)/grpc_credentials_test $(BINDIR)/$(CONFIG)/grpc_json_token_test $(BINDIR)/$(CONFIG)/grpc_stream_op_test $(BINDIR)/$(CONFIG)/hpack_parser_test $(BINDIR)/$(CONFIG)/hpack_table_test $(BINDIR)/$(CONFIG)/httpcli_format_request_test $(BINDIR)/$(CONFIG)/httpcli_parser_test $(BINDIR)/$(CONFIG)/httpcli_test $(BINDIR)/$(CONFIG)/json_rewrite $(BINDIR)/$(CONFIG)/json_rewrite_test $(BINDIR)/$(CONFIG)/json_test $(BINDIR)/$(CONFIG)/lame_client_test $(BINDIR)/$(CONFIG)/message_compress_test $(BINDIR)/$(CONFIG)/multi_init_test $(BINDIR)/$(CONFIG)/murmur_hash_test $(BINDIR)/$(CONFIG)/no_server_test $(BINDIR)/$(CONFIG)/poll_kick_posix_test $(BINDIR)/$(CONFIG)/resolve_address_test $(BINDIR)/$(CONFIG)/secure_endpoint_test $(BINDIR)/$(CONFIG)/sockaddr_utils_test $(BINDIR)/$(CONFIG)/tcp_client_posix_test $(BINDIR)/$(CONFIG)/tcp_posix_test $(BINDIR)/$(CONFIG)/tcp_server_posix_test $(BINDIR)/$(CONFIG)/time_averaged_stats_test $(BINDIR)/$(CONFIG)/time_test $(BINDIR)/$(CONFIG)/timeout_encoding_test $(BINDIR)/$(CONFIG)/timers_test $(BINDIR)/$(CONFIG)/transport_metadata_test $(BINDIR)/$(CONFIG)/transport_security_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fake_security_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_no_op_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_no_op_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_simple_ssl_with_oauth2_fullstack_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_bad_hostname_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_census_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_disappearing_server_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_empty_batch_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_invoke_large_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_message_length_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_no_op_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_registered_call_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_and_call_creds_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_payload_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_server_finishes_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_delayed_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_fullstack_uds_posix_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_bad_hostname_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_census_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_disappearing_server_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_empty_batch_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_invoke_large_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_max_message_length_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_no_op_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_registered_call_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_request_with_payload_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_server_finishes_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test $(BINDIR)/$(CONFIG)/connection_prefix_bad_client_test buildtests_cxx: privatelibs_cxx $(BINDIR)/$(CONFIG)/async_end2end_test $(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test $(BINDIR)/$(CONFIG)/async_unary_ping_pong_test $(BINDIR)/$(CONFIG)/channel_arguments_test $(BINDIR)/$(CONFIG)/cli_call_test $(BINDIR)/$(CONFIG)/client_crash_test $(BINDIR)/$(CONFIG)/client_crash_test_server $(BINDIR)/$(CONFIG)/credentials_test $(BINDIR)/$(CONFIG)/cxx_time_test $(BINDIR)/$(CONFIG)/end2end_test $(BINDIR)/$(CONFIG)/generic_end2end_test $(BINDIR)/$(CONFIG)/grpc_cli $(BINDIR)/$(CONFIG)/interop_client $(BINDIR)/$(CONFIG)/interop_server $(BINDIR)/$(CONFIG)/interop_test $(BINDIR)/$(CONFIG)/mock_test $(BINDIR)/$(CONFIG)/server_crash_test $(BINDIR)/$(CONFIG)/server_crash_test_client $(BINDIR)/$(CONFIG)/status_test $(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test $(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test $(BINDIR)/$(CONFIG)/thread_pool_test $(BINDIR)/$(CONFIG)/thread_stress_test @@ -1182,6 +1183,14 @@ test_c: buildtests_c $(Q) $(BINDIR)/$(CONFIG)/bin_encoder_test || ( echo test bin_encoder_test failed ; exit 1 ) $(E) "[RUN] Testing census_hash_table_test" $(Q) $(BINDIR)/$(CONFIG)/census_hash_table_test || ( echo test census_hash_table_test failed ; exit 1 ) + $(E) "[RUN] Testing census_statistics_multiple_writers_test" + $(Q) $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_test || ( echo test census_statistics_multiple_writers_test failed ; exit 1 ) + $(E) "[RUN] Testing census_statistics_performance_test" + $(Q) $(BINDIR)/$(CONFIG)/census_statistics_performance_test || ( echo test census_statistics_performance_test failed ; exit 1 ) + $(E) "[RUN] Testing census_statistics_quick_test" + $(Q) $(BINDIR)/$(CONFIG)/census_statistics_quick_test || ( echo test census_statistics_quick_test failed ; exit 1 ) + $(E) "[RUN] Testing census_statistics_small_log_test" + $(Q) $(BINDIR)/$(CONFIG)/census_statistics_small_log_test || ( echo test census_statistics_small_log_test failed ; exit 1 ) $(E) "[RUN] Testing census_stub_test" $(Q) $(BINDIR)/$(CONFIG)/census_stub_test || ( echo test census_stub_test failed ; exit 1 ) $(E) "[RUN] Testing census_window_stats_test" @@ -1994,19 +2003,13 @@ test_c: buildtests_c $(Q) $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test || ( echo test chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test failed ; exit 1 ) $(E) "[RUN] Testing chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test" $(Q) $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test || ( echo test chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test failed ; exit 1 ) + $(E) "[RUN] Testing connection_prefix_bad_client_test" + $(Q) $(BINDIR)/$(CONFIG)/connection_prefix_bad_client_test || ( echo test connection_prefix_bad_client_test failed ; exit 1 ) flaky_test_c: buildtests_c $(E) "[RUN] Testing census_statistics_multiple_writers_circular_buffer_test" $(Q) $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_circular_buffer_test || ( echo test census_statistics_multiple_writers_circular_buffer_test failed ; exit 1 ) - $(E) "[RUN] Testing census_statistics_multiple_writers_test" - $(Q) $(BINDIR)/$(CONFIG)/census_statistics_multiple_writers_test || ( echo test census_statistics_multiple_writers_test failed ; exit 1 ) - $(E) "[RUN] Testing census_statistics_performance_test" - $(Q) $(BINDIR)/$(CONFIG)/census_statistics_performance_test || ( echo test census_statistics_performance_test failed ; exit 1 ) - $(E) "[RUN] Testing census_statistics_quick_test" - $(Q) $(BINDIR)/$(CONFIG)/census_statistics_quick_test || ( echo test census_statistics_quick_test failed ; exit 1 ) - $(E) "[RUN] Testing census_statistics_small_log_test" - $(Q) $(BINDIR)/$(CONFIG)/census_statistics_small_log_test || ( echo test census_statistics_small_log_test failed ; exit 1 ) $(E) "[RUN] Testing chttp2_fake_security_cancel_after_accept_test" $(Q) $(BINDIR)/$(CONFIG)/chttp2_fake_security_cancel_after_accept_test || ( echo test chttp2_fake_security_cancel_after_accept_test failed ; exit 1 ) $(E) "[RUN] Testing chttp2_fake_security_invoke_large_request_test" @@ -3214,6 +3217,57 @@ endif endif +LIBGRPC++_BENCHMARK_CONFIG_SRC = \ + $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc \ + test/cpp/qps/report.cc \ + test/cpp/util/benchmark_config.cc \ + + +LIBGRPC++_BENCHMARK_CONFIG_OBJS = $(addprefix $(OBJDIR)/$(CONFIG)/, $(addsuffix .o, $(basename $(LIBGRPC++_BENCHMARK_CONFIG_SRC)))) + +ifeq ($(NO_SECURE),true) + +# You can't build secure libraries if you don't have OpenSSL with ALPN. + +$(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a: openssl_dep_error + + +else + +ifeq ($(NO_PROTOBUF),true) + +# You can't build a C++ library if you don't have protobuf - a bit overreached, but still okay. + +$(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a: protobuf_dep_error + + +else + +$(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a: $(ZLIB_DEP) $(OPENSSL_DEP) $(PROTOBUF_DEP) $(LIBGRPC++_BENCHMARK_CONFIG_OBJS) + $(E) "[AR] Creating $@" + $(Q) mkdir -p `dirname $@` + $(Q) rm -f $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a + $(Q) $(AR) rcs $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBGRPC++_BENCHMARK_CONFIG_OBJS) +ifeq ($(SYSTEM),Darwin) + $(Q) ranlib $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a +endif + + + + +endif + +endif + +ifneq ($(NO_SECURE),true) +ifneq ($(NO_DEPS),true) +-include $(LIBGRPC++_BENCHMARK_CONFIG_OBJS:.o=.dep) +endif +endif +$(OBJDIR)/$(CONFIG)/test/cpp/qps/report.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc +$(OBJDIR)/$(CONFIG)/test/cpp/util/benchmark_config.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc + + LIBGRPC++_TEST_CONFIG_SRC = \ test/cpp/util/test_config.cc \ @@ -3727,7 +3781,6 @@ LIBQPS_SRC = \ test/cpp/qps/client_sync.cc \ test/cpp/qps/driver.cc \ test/cpp/qps/qps_worker.cc \ - test/cpp/qps/report.cc \ test/cpp/qps/server_async.cc \ test/cpp/qps/server_sync.cc \ test/cpp/qps/timer.cc \ @@ -3778,7 +3831,6 @@ $(OBJDIR)/$(CONFIG)/test/cpp/qps/client_async.o: $(GENDIR)/test/cpp/qps/qpstest. $(OBJDIR)/$(CONFIG)/test/cpp/qps/client_sync.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc $(OBJDIR)/$(CONFIG)/test/cpp/qps/driver.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc $(OBJDIR)/$(CONFIG)/test/cpp/qps/qps_worker.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc -$(OBJDIR)/$(CONFIG)/test/cpp/qps/report.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc $(OBJDIR)/$(CONFIG)/test/cpp/qps/server_async.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc $(OBJDIR)/$(CONFIG)/test/cpp/qps/server_sync.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc $(OBJDIR)/$(CONFIG)/test/cpp/qps/timer.o: $(GENDIR)/test/cpp/qps/qpstest.pb.cc $(GENDIR)/test/cpp/qps/qpstest.grpc.pb.cc @@ -4789,6 +4841,43 @@ endif endif +LIBBAD_CLIENT_TEST_SRC = \ + test/core/bad_client/bad_client.c \ + + +LIBBAD_CLIENT_TEST_OBJS = $(addprefix $(OBJDIR)/$(CONFIG)/, $(addsuffix .o, $(basename $(LIBBAD_CLIENT_TEST_SRC)))) + +ifeq ($(NO_SECURE),true) + +# You can't build secure libraries if you don't have OpenSSL with ALPN. + +$(LIBDIR)/$(CONFIG)/libbad_client_test.a: openssl_dep_error + + +else + + +$(LIBDIR)/$(CONFIG)/libbad_client_test.a: $(ZLIB_DEP) $(OPENSSL_DEP) $(LIBBAD_CLIENT_TEST_OBJS) + $(E) "[AR] Creating $@" + $(Q) mkdir -p `dirname $@` + $(Q) rm -f $(LIBDIR)/$(CONFIG)/libbad_client_test.a + $(Q) $(AR) rcs $(LIBDIR)/$(CONFIG)/libbad_client_test.a $(LIBBAD_CLIENT_TEST_OBJS) +ifeq ($(SYSTEM),Darwin) + $(Q) ranlib $(LIBDIR)/$(CONFIG)/libbad_client_test.a +endif + + + + +endif + +ifneq ($(NO_SECURE),true) +ifneq ($(NO_DEPS),true) +-include $(LIBBAD_CLIENT_TEST_OBJS:.o=.dep) +endif +endif + + # All of the test targets, and protoc plugins @@ -7087,16 +7176,16 @@ $(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test: $(PROTOBUF_DEP) $(ASYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test: $(PROTOBUF_DEP) $(ASYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(ASYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test + $(Q) $(LDXX) $(LDFLAGS) $(ASYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/async_streaming_ping_pong_test endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/async_streaming_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/async_streaming_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a deps_async_streaming_ping_pong_test: $(ASYNC_STREAMING_PING_PONG_TEST_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -7127,16 +7216,16 @@ $(BINDIR)/$(CONFIG)/async_unary_ping_pong_test: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/async_unary_ping_pong_test: $(PROTOBUF_DEP) $(ASYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(BINDIR)/$(CONFIG)/async_unary_ping_pong_test: $(PROTOBUF_DEP) $(ASYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(ASYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/async_unary_ping_pong_test + $(Q) $(LDXX) $(LDFLAGS) $(ASYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/async_unary_ping_pong_test endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/async_unary_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/async_unary_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a deps_async_unary_ping_pong_test: $(ASYNC_UNARY_PING_PONG_TEST_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -7925,16 +8014,16 @@ $(BINDIR)/$(CONFIG)/qps_driver: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/qps_driver: $(PROTOBUF_DEP) $(QPS_DRIVER_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a +$(BINDIR)/$(CONFIG)/qps_driver: $(PROTOBUF_DEP) $(QPS_DRIVER_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(QPS_DRIVER_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/qps_driver + $(Q) $(LDXX) $(LDFLAGS) $(QPS_DRIVER_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/qps_driver endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/qps_driver.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/qps_driver.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a deps_qps_driver: $(QPS_DRIVER_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -7965,16 +8054,16 @@ $(BINDIR)/$(CONFIG)/qps_test: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/qps_test: $(PROTOBUF_DEP) $(QPS_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a +$(BINDIR)/$(CONFIG)/qps_test: $(PROTOBUF_DEP) $(QPS_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(QPS_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/qps_test + $(Q) $(LDXX) $(LDFLAGS) $(QPS_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/qps_test endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/qps_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/qps_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_config.a deps_qps_test: $(QPS_TEST_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -8165,16 +8254,16 @@ $(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test: $(PROTOBUF_DEP) $(SYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test: $(PROTOBUF_DEP) $(SYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(SYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test + $(Q) $(LDXX) $(LDFLAGS) $(SYNC_STREAMING_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/sync_streaming_ping_pong_test endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/sync_streaming_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/sync_streaming_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a deps_sync_streaming_ping_pong_test: $(SYNC_STREAMING_PING_PONG_TEST_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -8205,16 +8294,16 @@ $(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test: protobuf_dep_error else -$(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test: $(PROTOBUF_DEP) $(SYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test: $(PROTOBUF_DEP) $(SYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(E) "[LD] Linking $@" $(Q) mkdir -p `dirname $@` - $(Q) $(LDXX) $(LDFLAGS) $(SYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test + $(Q) $(LDXX) $(LDFLAGS) $(SYNC_UNARY_PING_PONG_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBSXX) $(LDLIBS_PROTOBUF) $(LDLIBS) $(LDLIBS_SECURE) $(GTEST_LIB) -o $(BINDIR)/$(CONFIG)/sync_unary_ping_pong_test endif endif -$(OBJDIR)/$(CONFIG)/test/cpp/qps/sync_unary_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +$(OBJDIR)/$(CONFIG)/test/cpp/qps/sync_unary_ping_pong_test.o: $(LIBDIR)/$(CONFIG)/libqps.a $(LIBDIR)/$(CONFIG)/libgrpc++_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++_benchmark_config.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util.a $(LIBDIR)/$(CONFIG)/libgrpc++.a $(LIBDIR)/$(CONFIG)/libgrpc.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a deps_sync_unary_ping_pong_test: $(SYNC_UNARY_PING_PONG_TEST_OBJS:.o=.dep) ifneq ($(NO_SECURE),true) @@ -13600,6 +13689,23 @@ $(BINDIR)/$(CONFIG)/chttp2_socket_pair_with_grpc_trace_simple_request_with_high_ +CONNECTION_PREFIX_BAD_CLIENT_TEST_SRC = \ + test/core/bad_client/tests/connection_prefix.c \ + +CONNECTION_PREFIX_BAD_CLIENT_TEST_OBJS = $(addprefix $(OBJDIR)/$(CONFIG)/, $(addsuffix .o, $(basename $(CONNECTION_PREFIX_BAD_CLIENT_TEST_SRC)))) +$(BINDIR)/$(CONFIG)/connection_prefix_bad_client_test: $(CONNECTION_PREFIX_BAD_CLIENT_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libbad_client_test.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util_unsecure.a $(LIBDIR)/$(CONFIG)/libgrpc_unsecure.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a + $(E) "[LD] Linking $@" + $(Q) mkdir -p `dirname $@` + $(Q) $(LD) $(LDFLAGS) $(CONNECTION_PREFIX_BAD_CLIENT_TEST_OBJS) $(LIBDIR)/$(CONFIG)/libbad_client_test.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util_unsecure.a $(LIBDIR)/$(CONFIG)/libgrpc_unsecure.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a $(LDLIBS) -o $(BINDIR)/$(CONFIG)/connection_prefix_bad_client_test + +$(OBJDIR)/$(CONFIG)/test/core/bad_client/tests/connection_prefix.o: $(LIBDIR)/$(CONFIG)/libbad_client_test.a $(LIBDIR)/$(CONFIG)/libgrpc_test_util_unsecure.a $(LIBDIR)/$(CONFIG)/libgrpc_unsecure.a $(LIBDIR)/$(CONFIG)/libgpr_test_util.a $(LIBDIR)/$(CONFIG)/libgpr.a +deps_connection_prefix_bad_client_test: $(CONNECTION_PREFIX_BAD_CLIENT_TEST_OBJS:.o=.dep) + +ifneq ($(NO_DEPS),true) +-include $(CONNECTION_PREFIX_BAD_CLIENT_TEST_OBJS:.o=.dep) +endif + + diff --git a/build.json b/build.json index b893692205..0a42d70967 100644 --- a/build.json +++ b/build.json @@ -526,6 +526,16 @@ "vs_project_guid": "{C187A093-A0FE-489D-A40A-6E33DE0F9FEB}" }, { + "name": "grpc++_benchmark_config", + "build": "private", + "language": "c++", + "src": [ + "test/cpp/qps/qpstest.proto", + "test/cpp/qps/report.cc", + "test/cpp/util/benchmark_config.cc" + ] + }, + { "name": "grpc++_test_config", "build": "private", "language": "c++", @@ -589,7 +599,8 @@ "src/compiler/ruby_generator.cc" ], "deps": [], - "secure": "no" + "secure": "no", + "vs_project_guid": "{B6E81D84-2ACB-41B8-8781-493A944C7817}" }, { "name": "interop_client_helper", @@ -694,7 +705,6 @@ "test/cpp/qps/client_sync.cc", "test/cpp/qps/driver.cc", "test/cpp/qps/qps_worker.cc", - "test/cpp/qps/report.cc", "test/cpp/qps/server_async.cc", "test/cpp/qps/server_sync.cc", "test/cpp/qps/timer.cc" @@ -820,7 +830,6 @@ }, { "name": "census_statistics_multiple_writers_test", - "flaky": true, "build": "test", "language": "c", "src": [ @@ -835,7 +844,6 @@ }, { "name": "census_statistics_performance_test", - "flaky": true, "build": "test", "language": "c", "src": [ @@ -850,7 +858,6 @@ }, { "name": "census_statistics_quick_test", - "flaky": true, "build": "test", "language": "c", "src": [ @@ -865,7 +872,6 @@ }, { "name": "census_statistics_small_log_test", - "flaky": true, "build": "test", "language": "c", "src": [ @@ -1821,6 +1827,7 @@ "deps": [ "qps", "grpc++_test_util", + "grpc++_benchmark_config", "grpc_test_util", "grpc++", "grpc", @@ -1838,6 +1845,7 @@ "deps": [ "qps", "grpc++_test_util", + "grpc++_benchmark_config", "grpc_test_util", "grpc++", "grpc", @@ -1995,7 +2003,8 @@ "deps": [ "grpc_plugin_support" ], - "secure": "no" + "secure": "no", + "vs_project_guid": "{7E51A25F-AC59-488F-906C-C60FAAE706AA}" }, { "name": "grpc_csharp_plugin", @@ -2007,7 +2016,8 @@ "deps": [ "grpc_plugin_support" ], - "secure": "no" + "secure": "no", + "vs_project_guid": "{3C813052-A49A-4662-B90A-1ADBEC7EE453}" }, { "name": "grpc_objective_c_plugin", @@ -2019,7 +2029,8 @@ "deps": [ "grpc_plugin_support" ], - "secure": "no" + "secure": "no", + "vs_project_guid": "{19564640-CEE6-4921-ABA5-676ED79A36F6}" }, { "name": "grpc_python_plugin", @@ -2031,7 +2042,8 @@ "deps": [ "grpc_plugin_support" ], - "secure": "no" + "secure": "no", + "vs_project_guid": "{DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}" }, { "name": "grpc_ruby_plugin", @@ -2043,7 +2055,8 @@ "deps": [ "grpc_plugin_support" ], - "secure": "no" + "secure": "no", + "vs_project_guid": "{069E9D05-B78B-4751-9252-D21EBAE7DE8E}" }, { "name": "interop_client", @@ -2178,7 +2191,8 @@ "grpc", "gpr_test_util", "gpr", - "grpc++_test_config" + "grpc++_test_config", + "grpc++_benchmark_config" ] }, { @@ -2191,6 +2205,7 @@ "deps": [ "qps", "grpc++_test_util", + "grpc++_benchmark_config", "grpc_test_util", "grpc++", "grpc", @@ -2279,6 +2294,7 @@ "deps": [ "qps", "grpc++_test_util", + "grpc++_benchmark_config", "grpc_test_util", "grpc++", "grpc", @@ -2296,6 +2312,7 @@ "deps": [ "qps", "grpc++_test_util", + "grpc++_benchmark_config", "grpc_test_util", "grpc++", "grpc", diff --git a/composer.json b/composer.json new file mode 100644 index 0000000000..875ec55d8a --- /dev/null +++ b/composer.json @@ -0,0 +1,17 @@ +{ + "name": "grpc/grpc", + "type": "library", + "description": "gRPC library for PHP", + "keywords": ["rpc"], + "homepage": "http://grpc.io", + "license": "BSD-3-Clause", + "require": { + "php": ">=5.5.0", + "google/auth": "dev-master" + }, + "autoload": { + "psr-4": { + "Grpc\\": "src/php/lib/Grpc/" + } + } +} diff --git a/doc/interop-test-descriptions.md b/doc/interop-test-descriptions.md index 066116b2d9..c3da84377a 100644 --- a/doc/interop-test-descriptions.md +++ b/doc/interop-test-descriptions.md @@ -558,20 +558,14 @@ pushback (i.e., attempts to send succeed only after appropriate delays). Propagation of status code and message (yangg) -Cancel after sent headers (ctiller - done) - -Cancel after received first message (ctiller - done) - -Zero-message streams (ejona) - -Multiple thousand simultaneous calls on same Channel (ctiller - done) +Multiple thousand simultaneous calls on same Channel (ctiller) OAuth2 tokens + Service Credentials from GCE metadata server (GCE->prod only) (abhishek) OAuth2 tokens + JWT signing key (GCE->prod only) (abhishek) -Metadata: client headers, server headers + trailers, binary+ascii (chenw) +Metadata: client headers, server headers + trailers, binary+ascii #### Normal priority: @@ -600,6 +594,8 @@ Multiple thousand simultaneous calls on different Channels (ctiller) Failed TLS hostname verification (ejona?) +Large amount of headers to cause CONTINUATIONs; 63K of 'X's, all in one header. + #### To priorize: Start streaming RPC but don't send any requests, server responds diff --git a/include/grpc/grpc.h b/include/grpc/grpc.h index 6e26dd07c9..1ba304bf3d 100644 --- a/include/grpc/grpc.h +++ b/include/grpc/grpc.h @@ -92,12 +92,13 @@ typedef struct { } value; } grpc_arg; -/* An array of arguments that can be passed around. - Used to set optional channel-level configuration. - These configuration options are modelled as key-value pairs as defined - by grpc_arg; keys are strings to allow easy backwards-compatible extension - by arbitrary parties. - All evaluation is performed at channel creation time. */ +/** An array of arguments that can be passed around. + + Used to set optional channel-level configuration. + These configuration options are modelled as key-value pairs as defined + by grpc_arg; keys are strings to allow easy backwards-compatible extension + by arbitrary parties. + All evaluation is performed at channel creation time. */ typedef struct { size_t num_args; grpc_arg *args; @@ -192,15 +193,27 @@ typedef struct grpc_metadata { } internal_data; } grpc_metadata; +/** The type of completion (for grpc_event) */ typedef enum grpc_completion_type { - GRPC_QUEUE_SHUTDOWN, /* Shutting down */ - GRPC_QUEUE_TIMEOUT, /* No event before timeout */ - GRPC_OP_COMPLETE /* operation completion */ + /** Shutting down */ + GRPC_QUEUE_SHUTDOWN, + /** No event before timeout */ + GRPC_QUEUE_TIMEOUT, + /** Operation completion */ + GRPC_OP_COMPLETE } grpc_completion_type; +/** The result of an operation. + + Returned by a completion queue when the operation started with tag. */ typedef struct grpc_event { + /** The type of the completion. */ grpc_completion_type type; + /** non-zero if the operation was successful, 0 upon failure. + Only GRPC_OP_COMPLETE can succeed or fail. */ int success; + /** The tag passed to grpc_call_start_batch etc to start this operation. + Only GRPC_OP_COMPLETE has a tag. */ void *tag; } grpc_event; @@ -322,37 +335,42 @@ typedef struct grpc_op { } data; } grpc_op; -/* Initialize the grpc library. - It is not safe to call any other grpc functions before calling this. - (To avoid overhead, little checking is done, and some things may work. We - do not warrant that they will continue to do so in future revisions of this - library). */ +/** Initialize the grpc library. + + It is not safe to call any other grpc functions before calling this. + (To avoid overhead, little checking is done, and some things may work. We + do not warrant that they will continue to do so in future revisions of this + library). */ void grpc_init(void); -/* Shut down the grpc library. - No memory is used by grpc after this call returns, nor are any instructions - executing within the grpc library. - Prior to calling, all application owned grpc objects must have been - destroyed. */ +/** Shut down the grpc library. + + No memory is used by grpc after this call returns, nor are any instructions + executing within the grpc library. + Prior to calling, all application owned grpc objects must have been + destroyed. */ void grpc_shutdown(void); +/** Create a completion queue */ grpc_completion_queue *grpc_completion_queue_create(void); -/* Blocks until an event is available, the completion queue is being shut down, - or deadline is reached. Returns NULL on timeout, otherwise the event that - occurred. +/** Blocks until an event is available, the completion queue is being shut down, + or deadline is reached. + + Returns NULL on timeout, otherwise the event that occurred. - Callers must not call grpc_completion_queue_next and - grpc_completion_queue_pluck simultaneously on the same completion queue. */ + Callers must not call grpc_completion_queue_next and + grpc_completion_queue_pluck simultaneously on the same completion queue. */ grpc_event grpc_completion_queue_next(grpc_completion_queue *cq, gpr_timespec deadline); -/* Blocks until an event with tag 'tag' is available, the completion queue is - being shutdown or deadline is reached. Returns NULL on timeout, or a pointer - to the event that occurred. +/** Blocks until an event with tag 'tag' is available, the completion queue is + being shutdown or deadline is reached. + + Returns NULL on timeout, or a pointer to the event that occurred. - Callers must not call grpc_completion_queue_next and - grpc_completion_queue_pluck simultaneously on the same completion queue. */ + Callers must not call grpc_completion_queue_next and + grpc_completion_queue_pluck simultaneously on the same completion queue. */ grpc_event grpc_completion_queue_pluck(grpc_completion_queue *cq, void *tag, gpr_timespec deadline); diff --git a/include/grpc/support/cmdline.h b/include/grpc/support/cmdline.h index c2350a07e8..e5a266666e 100644 --- a/include/grpc/support/cmdline.h +++ b/include/grpc/support/cmdline.h @@ -87,6 +87,8 @@ void gpr_cmdline_on_extra_arg( void gpr_cmdline_parse(gpr_cmdline *cl, int argc, char **argv); /* Destroy the parser */ void gpr_cmdline_destroy(gpr_cmdline *cl); +/* Get a string describing usage */ +char *gpr_cmdline_usage_string(gpr_cmdline *cl, const char *argv0); #ifdef __cplusplus } diff --git a/src/compiler/cpp_generator.cc b/src/compiler/cpp_generator.cc index acac1475f7..b0d2b5d229 100644 --- a/src/compiler/cpp_generator.cc +++ b/src/compiler/cpp_generator.cc @@ -86,23 +86,25 @@ grpc::string FilenameIdentifier(const grpc::string &filename) { grpc::string GetHeaderPrologue(const grpc::protobuf::FileDescriptor *file, const Parameters ¶ms) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - - vars["filename"] = file->name(); - vars["filename_identifier"] = FilenameIdentifier(file->name()); - vars["filename_base"] = grpc_generator::StripProto(file->name()); - - printer.Print(vars, "// Generated by the gRPC protobuf plugin.\n"); - printer.Print(vars, "// If you make any local change, they will be lost.\n"); - printer.Print(vars, "// source: $filename$\n"); - printer.Print(vars, "#ifndef GRPC_$filename_identifier$__INCLUDED\n"); - printer.Print(vars, "#define GRPC_$filename_identifier$__INCLUDED\n"); - printer.Print(vars, "\n"); - printer.Print(vars, "#include \"$filename_base$.pb.h\"\n"); - printer.Print(vars, "\n"); - + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + + vars["filename"] = file->name(); + vars["filename_identifier"] = FilenameIdentifier(file->name()); + vars["filename_base"] = grpc_generator::StripProto(file->name()); + + printer.Print(vars, "// Generated by the gRPC protobuf plugin.\n"); + printer.Print(vars, "// If you make any local change, they will be lost.\n"); + printer.Print(vars, "// source: $filename$\n"); + printer.Print(vars, "#ifndef GRPC_$filename_identifier$__INCLUDED\n"); + printer.Print(vars, "#define GRPC_$filename_identifier$__INCLUDED\n"); + printer.Print(vars, "\n"); + printer.Print(vars, "#include \"$filename_base$.pb.h\"\n"); + printer.Print(vars, "\n"); + } return output; } @@ -626,100 +628,108 @@ void PrintHeaderService(grpc::protobuf::io::Printer *printer, grpc::string GetHeaderServices(const grpc::protobuf::FileDescriptor *file, const Parameters ¶ms) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - - if (!params.services_namespace.empty()) { - vars["services_namespace"] = params.services_namespace; - printer.Print(vars, "\nnamespace $services_namespace$ {\n\n"); - } + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + + if (!params.services_namespace.empty()) { + vars["services_namespace"] = params.services_namespace; + printer.Print(vars, "\nnamespace $services_namespace$ {\n\n"); + } - for (int i = 0; i < file->service_count(); ++i) { - PrintHeaderService(&printer, file->service(i), &vars); - printer.Print("\n"); - } + for (int i = 0; i < file->service_count(); ++i) { + PrintHeaderService(&printer, file->service(i), &vars); + printer.Print("\n"); + } - if (!params.services_namespace.empty()) { - printer.Print(vars, "} // namespace $services_namespace$\n\n"); + if (!params.services_namespace.empty()) { + printer.Print(vars, "} // namespace $services_namespace$\n\n"); + } } - return output; } grpc::string GetHeaderEpilogue(const grpc::protobuf::FileDescriptor *file, const Parameters ¶ms) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - - vars["filename"] = file->name(); - vars["filename_identifier"] = FilenameIdentifier(file->name()); - - if (!file->package().empty()) { - std::vector<grpc::string> parts = - grpc_generator::tokenize(file->package(), "."); - - for (auto part = parts.rbegin(); part != parts.rend(); part++) { - vars["part"] = *part; - printer.Print(vars, "} // namespace $part$\n"); + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + + vars["filename"] = file->name(); + vars["filename_identifier"] = FilenameIdentifier(file->name()); + + if (!file->package().empty()) { + std::vector<grpc::string> parts = + grpc_generator::tokenize(file->package(), "."); + + for (auto part = parts.rbegin(); part != parts.rend(); part++) { + vars["part"] = *part; + printer.Print(vars, "} // namespace $part$\n"); + } + printer.Print(vars, "\n"); } + printer.Print(vars, "\n"); + printer.Print(vars, "#endif // GRPC_$filename_identifier$__INCLUDED\n"); } - - printer.Print(vars, "\n"); - printer.Print(vars, "#endif // GRPC_$filename_identifier$__INCLUDED\n"); - return output; } grpc::string GetSourcePrologue(const grpc::protobuf::FileDescriptor *file, const Parameters ¶ms) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - - vars["filename"] = file->name(); - vars["filename_base"] = grpc_generator::StripProto(file->name()); - - printer.Print(vars, "// Generated by the gRPC protobuf plugin.\n"); - printer.Print(vars, "// If you make any local change, they will be lost.\n"); - printer.Print(vars, "// source: $filename$\n\n"); - printer.Print(vars, "#include \"$filename_base$.pb.h\"\n"); - printer.Print(vars, "#include \"$filename_base$.grpc.pb.h\"\n"); - printer.Print(vars, "\n"); - + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + + vars["filename"] = file->name(); + vars["filename_base"] = grpc_generator::StripProto(file->name()); + + printer.Print(vars, "// Generated by the gRPC protobuf plugin.\n"); + printer.Print(vars, "// If you make any local change, they will be lost.\n"); + printer.Print(vars, "// source: $filename$\n\n"); + printer.Print(vars, "#include \"$filename_base$.pb.h\"\n"); + printer.Print(vars, "#include \"$filename_base$.grpc.pb.h\"\n"); + printer.Print(vars, "\n"); + } return output; } grpc::string GetSourceIncludes(const grpc::protobuf::FileDescriptor *file, const Parameters ¶m) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - - printer.Print(vars, "#include <grpc++/async_unary_call.h>\n"); - printer.Print(vars, "#include <grpc++/channel_interface.h>\n"); - printer.Print(vars, "#include <grpc++/impl/client_unary_call.h>\n"); - printer.Print(vars, "#include <grpc++/impl/rpc_service_method.h>\n"); - printer.Print(vars, "#include <grpc++/impl/service_type.h>\n"); - printer.Print(vars, "#include <grpc++/stream.h>\n"); - - if (!file->package().empty()) { - std::vector<grpc::string> parts = - grpc_generator::tokenize(file->package(), "."); - - for (auto part = parts.begin(); part != parts.end(); part++) { - vars["part"] = *part; - printer.Print(vars, "namespace $part$ {\n"); + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + + printer.Print(vars, "#include <grpc++/async_unary_call.h>\n"); + printer.Print(vars, "#include <grpc++/channel_interface.h>\n"); + printer.Print(vars, "#include <grpc++/impl/client_unary_call.h>\n"); + printer.Print(vars, "#include <grpc++/impl/rpc_service_method.h>\n"); + printer.Print(vars, "#include <grpc++/impl/service_type.h>\n"); + printer.Print(vars, "#include <grpc++/stream.h>\n"); + + if (!file->package().empty()) { + std::vector<grpc::string> parts = + grpc_generator::tokenize(file->package(), "."); + + for (auto part = parts.begin(); part != parts.end(); part++) { + vars["part"] = *part; + printer.Print(vars, "namespace $part$ {\n"); + } } - } - - printer.Print(vars, "\n"); + printer.Print(vars, "\n"); + } return output; } @@ -1077,26 +1087,29 @@ void PrintSourceService(grpc::protobuf::io::Printer *printer, grpc::string GetSourceServices(const grpc::protobuf::FileDescriptor *file, const Parameters ¶ms) { grpc::string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - grpc::protobuf::io::Printer printer(&output_stream, '$'); - std::map<grpc::string, grpc::string> vars; - // Package string is empty or ends with a dot. It is used to fully qualify - // method names. - vars["Package"] = file->package(); - if (!file->package().empty()) { - vars["Package"].append("."); - } - if (!params.services_namespace.empty()) { - vars["ns"] = params.services_namespace + "::"; - vars["prefix"] = params.services_namespace; - } else { - vars["ns"] = ""; - vars["prefix"] = ""; - } + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + grpc::protobuf::io::Printer printer(&output_stream, '$'); + std::map<grpc::string, grpc::string> vars; + // Package string is empty or ends with a dot. It is used to fully qualify + // method names. + vars["Package"] = file->package(); + if (!file->package().empty()) { + vars["Package"].append("."); + } + if (!params.services_namespace.empty()) { + vars["ns"] = params.services_namespace + "::"; + vars["prefix"] = params.services_namespace; + } else { + vars["ns"] = ""; + vars["prefix"] = ""; + } - for (int i = 0; i < file->service_count(); ++i) { - PrintSourceService(&printer, file->service(i), &vars); - printer.Print("\n"); + for (int i = 0; i < file->service_count(); ++i) { + PrintSourceService(&printer, file->service(i), &vars); + printer.Print("\n"); + } } return output; } diff --git a/src/compiler/csharp_generator.cc b/src/compiler/csharp_generator.cc index 5dd078b303..ccb0b688b6 100644 --- a/src/compiler/csharp_generator.cc +++ b/src/compiler/csharp_generator.cc @@ -474,35 +474,39 @@ void GenerateService(Printer* out, const ServiceDescriptor *service) { grpc::string GetServices(const FileDescriptor *file) { grpc::string output; - StringOutputStream output_stream(&output); - Printer out(&output_stream, '$'); + { + // Scope the output stream so it closes and finalizes output to the string. - // Don't write out any output if there no services, to avoid empty service - // files being generated for proto files that don't declare any. - if (file->service_count() == 0) { - return output; - } + StringOutputStream output_stream(&output); + Printer out(&output_stream, '$'); + + // Don't write out any output if there no services, to avoid empty service + // files being generated for proto files that don't declare any. + if (file->service_count() == 0) { + return output; + } - // Write out a file header. - out.Print("// Generated by the protocol buffer compiler. DO NOT EDIT!\n"); - out.Print("// source: $filename$\n", "filename", file->name()); - out.Print("#region Designer generated code\n"); - out.Print("\n"); - out.Print("using System;\n"); - out.Print("using System.Threading;\n"); - out.Print("using System.Threading.Tasks;\n"); - out.Print("using Grpc.Core;\n"); - // TODO(jtattermusch): add using for protobuf message classes - out.Print("\n"); - - out.Print("namespace $namespace$ {\n", "namespace", GetFileNamespace(file)); - out.Indent(); - for (int i = 0; i < file->service_count(); i++) { - GenerateService(&out, file->service(i)); + // Write out a file header. + out.Print("// Generated by the protocol buffer compiler. DO NOT EDIT!\n"); + out.Print("// source: $filename$\n", "filename", file->name()); + out.Print("#region Designer generated code\n"); + out.Print("\n"); + out.Print("using System;\n"); + out.Print("using System.Threading;\n"); + out.Print("using System.Threading.Tasks;\n"); + out.Print("using Grpc.Core;\n"); + // TODO(jtattermusch): add using for protobuf message classes + out.Print("\n"); + + out.Print("namespace $namespace$ {\n", "namespace", GetFileNamespace(file)); + out.Indent(); + for (int i = 0; i < file->service_count(); i++) { + GenerateService(&out, file->service(i)); + } + out.Outdent(); + out.Print("}\n"); + out.Print("#endregion\n"); } - out.Outdent(); - out.Print("}\n"); - out.Print("#endregion\n"); return output; } diff --git a/src/compiler/objective_c_generator.cc b/src/compiler/objective_c_generator.cc index 8f35302bee..1bf0254f5b 100644 --- a/src/compiler/objective_c_generator.cc +++ b/src/compiler/objective_c_generator.cc @@ -176,65 +176,71 @@ void PrintMethodImplementations(Printer *printer, string GetHeader(const ServiceDescriptor *service, const string prefix) { string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - Printer printer(&output_stream, '$'); + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + Printer printer(&output_stream, '$'); - printer.Print("@protocol GRXWriteable;\n"); - printer.Print("@protocol GRXWriter;\n\n"); - - map<string, string> vars = {{"service_name", service->name()}, - {"prefix", prefix}}; - printer.Print(vars, "@protocol $prefix$$service_name$ <NSObject>\n\n"); - - for (int i = 0; i < service->method_count(); i++) { - PrintMethodDeclarations(&printer, service->method(i), vars); + printer.Print("@protocol GRXWriteable;\n"); + printer.Print("@protocol GRXWriter;\n\n"); + + map<string, string> vars = {{"service_name", service->name()}, + {"prefix", prefix}}; + printer.Print(vars, "@protocol $prefix$$service_name$ <NSObject>\n\n"); + + for (int i = 0; i < service->method_count(); i++) { + PrintMethodDeclarations(&printer, service->method(i), vars); + } + printer.Print("@end\n\n"); + + printer.Print("// Basic service implementation, over gRPC, that only does" + " marshalling and parsing.\n"); + printer.Print(vars, "@interface $prefix$$service_name$ :" + " ProtoService<$prefix$$service_name$>\n"); + printer.Print("- (instancetype)initWithHost:(NSString *)host" + " NS_DESIGNATED_INITIALIZER;\n"); + printer.Print("@end\n"); } - printer.Print("@end\n\n"); - - printer.Print("// Basic service implementation, over gRPC, that only does" - " marshalling and parsing.\n"); - printer.Print(vars, "@interface $prefix$$service_name$ :" - " ProtoService<$prefix$$service_name$>\n"); - printer.Print("- (instancetype)initWithHost:(NSString *)host" - " NS_DESIGNATED_INITIALIZER;\n"); - printer.Print("@end\n"); return output; } string GetSource(const ServiceDescriptor *service, const string prefix) { string output; - grpc::protobuf::io::StringOutputStream output_stream(&output); - Printer printer(&output_stream, '$'); - - map<string, string> vars = {{"service_name", service->name()}, - {"package", service->file()->package()}, - {"prefix", prefix}}; - - printer.Print(vars, - "static NSString *const kPackageName = @\"$package$\";\n"); - printer.Print(vars, - "static NSString *const kServiceName = @\"$service_name$\";\n\n"); - - printer.Print(vars, "@implementation $prefix$$service_name$\n\n"); - - printer.Print("// Designated initializer\n"); - printer.Print("- (instancetype)initWithHost:(NSString *)host {\n"); - printer.Print(" return (self = [super initWithHost:host" - " packageName:kPackageName serviceName:kServiceName]);\n"); - printer.Print("}\n\n"); - printer.Print("// Override superclass initializer to disallow different" - " package and service names.\n"); - printer.Print("- (instancetype)initWithHost:(NSString *)host\n"); - printer.Print(" packageName:(NSString *)packageName\n"); - printer.Print(" serviceName:(NSString *)serviceName {\n"); - printer.Print(" return [self initWithHost:host];\n"); - printer.Print("}\n\n\n"); - - for (int i = 0; i < service->method_count(); i++) { - PrintMethodImplementations(&printer, service->method(i), vars); - } + { + // Scope the output stream so it closes and finalizes output to the string. + grpc::protobuf::io::StringOutputStream output_stream(&output); + Printer printer(&output_stream, '$'); + + map<string, string> vars = {{"service_name", service->name()}, + {"package", service->file()->package()}, + {"prefix", prefix}}; - printer.Print("@end\n"); + printer.Print(vars, + "static NSString *const kPackageName = @\"$package$\";\n"); + printer.Print(vars, + "static NSString *const kServiceName = @\"$service_name$\";\n\n"); + + printer.Print(vars, "@implementation $prefix$$service_name$\n\n"); + + printer.Print("// Designated initializer\n"); + printer.Print("- (instancetype)initWithHost:(NSString *)host {\n"); + printer.Print(" return (self = [super initWithHost:host" + " packageName:kPackageName serviceName:kServiceName]);\n"); + printer.Print("}\n\n"); + printer.Print("// Override superclass initializer to disallow different" + " package and service names.\n"); + printer.Print("- (instancetype)initWithHost:(NSString *)host\n"); + printer.Print(" packageName:(NSString *)packageName\n"); + printer.Print(" serviceName:(NSString *)serviceName {\n"); + printer.Print(" return [self initWithHost:host];\n"); + printer.Print("}\n\n\n"); + + for (int i = 0; i < service->method_count(); i++) { + PrintMethodImplementations(&printer, service->method(i), vars); + } + + printer.Print("@end\n"); + } return output; } diff --git a/src/compiler/ruby_generator.cc b/src/compiler/ruby_generator.cc index a0bb92848b..299137519f 100644 --- a/src/compiler/ruby_generator.cc +++ b/src/compiler/ruby_generator.cc @@ -119,49 +119,52 @@ void PrintService(const ServiceDescriptor *service, const grpc::string &package, grpc::string GetServices(const FileDescriptor *file) { grpc::string output; - StringOutputStream output_stream(&output); - Printer out(&output_stream, '$'); - - // Don't write out any output if there no services, to avoid empty service - // files being generated for proto files that don't declare any. - if (file->service_count() == 0) { - return output; - } - - // Write out a file header. - std::map<grpc::string, grpc::string> header_comment_vars = ListToDict( - {"file.name", file->name(), "file.package", file->package(), }); - out.Print("# Generated by the protocol buffer compiler. DO NOT EDIT!\n"); - out.Print(header_comment_vars, - "# Source: $file.name$ for package '$file.package$'\n"); - - out.Print("\n"); - out.Print("require 'grpc'\n"); - // Write out require statemment to import the separately generated file - // that defines the messages used by the service. This is generated by the - // main ruby plugin. - std::map<grpc::string, grpc::string> dep_vars = - ListToDict({"dep.name", MessagesRequireName(file), }); - out.Print(dep_vars, "require '$dep.name$'\n"); - - // Write out services within the modules - out.Print("\n"); - std::vector<grpc::string> modules = Split(file->package(), '.'); - for (size_t i = 0; i < modules.size(); ++i) { - std::map<grpc::string, grpc::string> module_vars = - ListToDict({"module.name", CapitalizeFirst(modules[i]), }); - out.Print(module_vars, "module $module.name$\n"); - out.Indent(); + { + // Scope the output stream so it closes and finalizes output to the string. + + StringOutputStream output_stream(&output); + Printer out(&output_stream, '$'); + + // Don't write out any output if there no services, to avoid empty service + // files being generated for proto files that don't declare any. + if (file->service_count() == 0) { + return output; + } + + // Write out a file header. + std::map<grpc::string, grpc::string> header_comment_vars = ListToDict( + {"file.name", file->name(), "file.package", file->package(), }); + out.Print("# Generated by the protocol buffer compiler. DO NOT EDIT!\n"); + out.Print(header_comment_vars, + "# Source: $file.name$ for package '$file.package$'\n"); + + out.Print("\n"); + out.Print("require 'grpc'\n"); + // Write out require statemment to import the separately generated file + // that defines the messages used by the service. This is generated by the + // main ruby plugin. + std::map<grpc::string, grpc::string> dep_vars = + ListToDict({"dep.name", MessagesRequireName(file), }); + out.Print(dep_vars, "require '$dep.name$'\n"); + + // Write out services within the modules + out.Print("\n"); + std::vector<grpc::string> modules = Split(file->package(), '.'); + for (size_t i = 0; i < modules.size(); ++i) { + std::map<grpc::string, grpc::string> module_vars = + ListToDict({"module.name", CapitalizeFirst(modules[i]), }); + out.Print(module_vars, "module $module.name$\n"); + out.Indent(); + } + for (int i = 0; i < file->service_count(); ++i) { + auto service = file->service(i); + PrintService(service, file->package(), &out); + } + for (size_t i = 0; i < modules.size(); ++i) { + out.Outdent(); + out.Print("end\n"); + } } - for (int i = 0; i < file->service_count(); ++i) { - auto service = file->service(i); - PrintService(service, file->package(), &out); - } - for (size_t i = 0; i < modules.size(); ++i) { - out.Outdent(); - out.Print("end\n"); - } - return output; } diff --git a/src/core/channel/client_channel.c b/src/core/channel/client_channel.c index 78f8d06d89..42e242ae81 100644 --- a/src/core/channel/client_channel.c +++ b/src/core/channel/client_channel.c @@ -144,6 +144,7 @@ static void handle_op_after_cancellation(grpc_call_element *elem, call_data *calld = elem->call_data; channel_data *chand = elem->channel_data; if (op->send_ops) { + grpc_stream_ops_unref_owned_objects(op->send_ops->ops, op->send_ops->nops); op->on_done_send(op->send_user_data, 0); } if (op->recv_ops) { diff --git a/src/core/iomgr/fd_posix.c b/src/core/iomgr/fd_posix.c index 9c8133d2d4..63615ea25f 100644 --- a/src/core/iomgr/fd_posix.c +++ b/src/core/iomgr/fd_posix.c @@ -96,8 +96,10 @@ static grpc_fd *alloc_fd(int fd) { gpr_atm_rel_store(&r->writest, NOT_READY); gpr_atm_rel_store(&r->shutdown, 0); r->fd = fd; - r->watcher_root.next = r->watcher_root.prev = &r->watcher_root; + r->inactive_watcher_root.next = r->inactive_watcher_root.prev = + &r->inactive_watcher_root; r->freelist_next = NULL; + r->read_watcher = r->write_watcher = NULL; return r; } @@ -147,14 +149,34 @@ int grpc_fd_is_orphaned(grpc_fd *fd) { return (gpr_atm_acq_load(&fd->refst) & 1) == 0; } -static void wake_watchers(grpc_fd *fd) { - grpc_fd_watcher *watcher; +static void maybe_wake_one_watcher_locked(grpc_fd *fd) { + if (fd->inactive_watcher_root.next != &fd->inactive_watcher_root) { + grpc_pollset_force_kick(fd->inactive_watcher_root.next->pollset); + } else if (fd->read_watcher) { + grpc_pollset_force_kick(fd->read_watcher->pollset); + } else if (fd->write_watcher) { + grpc_pollset_force_kick(fd->write_watcher->pollset); + } +} + +static void maybe_wake_one_watcher(grpc_fd *fd) { gpr_mu_lock(&fd->watcher_mu); - for (watcher = fd->watcher_root.next; watcher != &fd->watcher_root; - watcher = watcher->next) { + maybe_wake_one_watcher_locked(fd); + gpr_mu_unlock(&fd->watcher_mu); +} + +static void wake_all_watchers(grpc_fd *fd) { + grpc_fd_watcher *watcher; + for (watcher = fd->inactive_watcher_root.next; + watcher != &fd->inactive_watcher_root; watcher = watcher->next) { grpc_pollset_force_kick(watcher->pollset); } - gpr_mu_unlock(&fd->watcher_mu); + if (fd->read_watcher) { + grpc_pollset_force_kick(fd->read_watcher->pollset); + } + if (fd->write_watcher && fd->write_watcher != fd->read_watcher) { + grpc_pollset_force_kick(fd->write_watcher->pollset); + } } void grpc_fd_orphan(grpc_fd *fd, grpc_iomgr_cb_func on_done, void *user_data) { @@ -162,7 +184,7 @@ void grpc_fd_orphan(grpc_fd *fd, grpc_iomgr_cb_func on_done, void *user_data) { fd->on_done_user_data = user_data; shutdown(fd->fd, SHUT_RDWR); ref_by(fd, 1); /* remove active status, but keep referenced */ - wake_watchers(fd); + wake_all_watchers(fd); unref_by(fd, 2); /* drop the reference */ } @@ -204,7 +226,7 @@ static void notify_on(grpc_fd *fd, gpr_atm *st, grpc_iomgr_closure *closure, set_ready call. NOTE: we don't have an ABA problem here, since we should never have concurrent calls to the same notify_on function. */ - wake_watchers(fd); + maybe_wake_one_watcher(fd); return; } /* swap was unsuccessful due to an intervening set_ready call. @@ -290,29 +312,65 @@ void grpc_fd_notify_on_write(grpc_fd *fd, grpc_iomgr_closure *closure) { gpr_uint32 grpc_fd_begin_poll(grpc_fd *fd, grpc_pollset *pollset, gpr_uint32 read_mask, gpr_uint32 write_mask, grpc_fd_watcher *watcher) { + gpr_uint32 mask = 0; /* keep track of pollers that have requested our events, in case they change */ grpc_fd_ref(fd); gpr_mu_lock(&fd->watcher_mu); - watcher->next = &fd->watcher_root; - watcher->prev = watcher->next->prev; - watcher->next->prev = watcher->prev->next = watcher; + /* if there is nobody polling for read, but we need to, then start doing so */ + if (!fd->read_watcher && gpr_atm_acq_load(&fd->readst) > READY) { + fd->read_watcher = watcher; + mask |= read_mask; + } + /* if there is nobody polling for write, but we need to, then start doing so + */ + if (!fd->write_watcher && gpr_atm_acq_load(&fd->writest) > READY) { + fd->write_watcher = watcher; + mask |= write_mask; + } + /* if not polling, remember this watcher in case we need someone to later */ + if (mask == 0) { + watcher->next = &fd->inactive_watcher_root; + watcher->prev = watcher->next->prev; + watcher->next->prev = watcher->prev->next = watcher; + } watcher->pollset = pollset; watcher->fd = fd; gpr_mu_unlock(&fd->watcher_mu); - return (gpr_atm_acq_load(&fd->readst) != READY ? read_mask : 0) | - (gpr_atm_acq_load(&fd->writest) != READY ? write_mask : 0); + return mask; } -void grpc_fd_end_poll(grpc_fd_watcher *watcher) { - gpr_mu_lock(&watcher->fd->watcher_mu); - watcher->next->prev = watcher->prev; - watcher->prev->next = watcher->next; - gpr_mu_unlock(&watcher->fd->watcher_mu); +void grpc_fd_end_poll(grpc_fd_watcher *watcher, int got_read, int got_write) { + int was_polling = 0; + int kick = 0; + grpc_fd *fd = watcher->fd; + + gpr_mu_lock(&fd->watcher_mu); + if (watcher == fd->read_watcher) { + /* remove read watcher, kick if we still need a read */ + was_polling = 1; + kick = kick || !got_read; + fd->read_watcher = NULL; + } + if (watcher == fd->write_watcher) { + /* remove write watcher, kick if we still need a write */ + was_polling = 1; + kick = kick || !got_write; + fd->write_watcher = NULL; + } + if (!was_polling) { + /* remove from inactive list */ + watcher->next->prev = watcher->prev; + watcher->prev->next = watcher->next; + } + if (kick) { + maybe_wake_one_watcher_locked(fd); + } + gpr_mu_unlock(&fd->watcher_mu); - grpc_fd_unref(watcher->fd); + grpc_fd_unref(fd); } void grpc_fd_become_readable(grpc_fd *fd, int allow_synchronous_callback) { diff --git a/src/core/iomgr/fd_posix.h b/src/core/iomgr/fd_posix.h index be21f2b55f..cfc533b7f5 100644 --- a/src/core/iomgr/fd_posix.h +++ b/src/core/iomgr/fd_posix.h @@ -66,8 +66,32 @@ struct grpc_fd { gpr_mu set_state_mu; gpr_atm shutdown; + /* The watcher list. + + The following watcher related fields are protected by watcher_mu. + + An fd_watcher is an ephemeral object created when an fd wants to + begin polling, and destroyed after the poll. + + It denotes the fd's interest in whether to read poll or write poll + or both or neither on this fd. + + If a watcher is asked to poll for reads or writes, the read_watcher + or write_watcher fields are set respectively. A watcher may be asked + to poll for both, in which case both fields will be set. + + read_watcher and write_watcher may be NULL if no watcher has been + asked to poll for reads or writes. + + If an fd_watcher is not asked to poll for reads or writes, it's added + to a linked list of inactive watchers, rooted at inactive_watcher_root. + If at a later time there becomes need of a poller to poll, one of + the inactive pollers may be kicked out of their poll loops to take + that responsibility. */ gpr_mu watcher_mu; - grpc_fd_watcher watcher_root; + grpc_fd_watcher inactive_watcher_root; + grpc_fd_watcher *read_watcher; + grpc_fd_watcher *write_watcher; gpr_atm readst; gpr_atm writest; @@ -103,7 +127,7 @@ gpr_uint32 grpc_fd_begin_poll(grpc_fd *fd, grpc_pollset *pollset, gpr_uint32 read_mask, gpr_uint32 write_mask, grpc_fd_watcher *rec); /* Complete polling previously started with grpc_fd_begin_poll */ -void grpc_fd_end_poll(grpc_fd_watcher *rec); +void grpc_fd_end_poll(grpc_fd_watcher *rec, int got_read, int got_write); /* Return 1 if this fd is orphaned, 0 otherwise */ int grpc_fd_is_orphaned(grpc_fd *fd); diff --git a/src/core/iomgr/pollset_multipoller_with_poll_posix.c b/src/core/iomgr/pollset_multipoller_with_poll_posix.c index 25b7cfda1a..4d36107ab0 100644 --- a/src/core/iomgr/pollset_multipoller_with_poll_posix.c +++ b/src/core/iomgr/pollset_multipoller_with_poll_posix.c @@ -98,7 +98,7 @@ static void end_polling(grpc_pollset *pollset) { pollset_hdr *h; h = pollset->data.ptr; for (i = 1; i < h->pfd_count; i++) { - grpc_fd_end_poll(&h->watchers[i]); + grpc_fd_end_poll(&h->watchers[i], h->pfds[i].revents & POLLIN, h->pfds[i].revents & POLLOUT); } } diff --git a/src/core/iomgr/pollset_posix.c b/src/core/iomgr/pollset_posix.c index f496ac5bfa..826c792990 100644 --- a/src/core/iomgr/pollset_posix.c +++ b/src/core/iomgr/pollset_posix.c @@ -420,10 +420,12 @@ static int unary_poll_pollset_maybe_work(grpc_pollset *pollset, pfd[1].events = grpc_fd_begin_poll(fd, pollset, POLLIN, POLLOUT, &fd_watcher); - r = poll(pfd, GPR_ARRAY_SIZE(pfd), timeout); + /* poll fd count (argument 2) is shortened by one if we have no events + to poll on - such that it only includes the kicker */ + r = poll(pfd, GPR_ARRAY_SIZE(pfd) - (pfd[1].events == 0), timeout); GRPC_TIMER_MARK(GRPC_PTAG_POLL_FINISHED, r); - grpc_fd_end_poll(&fd_watcher); + grpc_fd_end_poll(&fd_watcher, pfd[1].revents & POLLIN, pfd[1].revents & POLLOUT); if (r < 0) { if (errno != EINTR) { diff --git a/src/core/support/cmdline.c b/src/core/support/cmdline.c index 72f46c1bd7..530952c437 100644 --- a/src/core/support/cmdline.c +++ b/src/core/support/cmdline.c @@ -131,33 +131,63 @@ void gpr_cmdline_on_extra_arg( cl->extra_arg_help = help; } -static void print_usage_and_die(gpr_cmdline *cl) { +/* recursively descend argument list, adding the last element + to s first - so that arguments are added in the order they were + added to the list by api calls */ +static void add_args_to_usage(gpr_strvec *s, arg *a) { + char *tmp; + + if (!a) return; + add_args_to_usage(s, a->next); + + switch (a->type) { + case ARGTYPE_BOOL: + gpr_asprintf(&tmp, " [--%s|--no-%s]", a->name, a->name); + gpr_strvec_add(s, tmp); + break; + case ARGTYPE_STRING: + gpr_asprintf(&tmp, " [--%s=string]", a->name); + gpr_strvec_add(s, tmp); + break; + case ARGTYPE_INT: + gpr_asprintf(&tmp, " [--%s=int]", a->name); + gpr_strvec_add(s, tmp); + break; + } +} + +char *gpr_cmdline_usage_string(gpr_cmdline *cl, const char *argv0) { /* TODO(ctiller): make this prettier */ - arg *a; - const char *name = strrchr(cl->argv0, '/'); + gpr_strvec s; + char *tmp; + const char *name = strrchr(argv0, '/'); + if (name) { name++; } else { - name = cl->argv0; - } - fprintf(stderr, "Usage: %s", name); - for (a = cl->args; a; a = a->next) { - switch (a->type) { - case ARGTYPE_BOOL: - fprintf(stderr, " [--%s|--no-%s]", a->name, a->name); - break; - case ARGTYPE_STRING: - fprintf(stderr, " [--%s=string]", a->name); - break; - case ARGTYPE_INT: - fprintf(stderr, " [--%s=int]", a->name); - break; - } + name = argv0; } + + gpr_strvec_init(&s); + + gpr_asprintf(&tmp, "Usage: %s", name); + gpr_strvec_add(&s, tmp); + add_args_to_usage(&s, cl->args); if (cl->extra_arg) { - fprintf(stderr, " [%s...]", cl->extra_arg_name); + gpr_asprintf(&tmp, " [%s...]", cl->extra_arg_name); + gpr_strvec_add(&s, tmp); } - fprintf(stderr, "\n"); + gpr_strvec_add(&s, gpr_strdup("\n")); + + tmp = gpr_strvec_flatten(&s, NULL); + gpr_strvec_destroy(&s); + return tmp; +} + +static void print_usage_and_die(gpr_cmdline *cl) { + char *usage = gpr_cmdline_usage_string(cl, cl->argv0); + fprintf(stderr, "%s", usage); + gpr_free(usage); exit(1); } diff --git a/src/core/surface/call.h b/src/core/surface/call.h index 60222bf389..9116538948 100644 --- a/src/core/surface/call.h +++ b/src/core/surface/call.h @@ -122,6 +122,16 @@ void grpc_call_log_batch(char *file, int line, gpr_log_severity severity, grpc_call *call, const grpc_op *ops, size_t nops, void *tag); +void grpc_server_log_request_call(char *file, int line, + gpr_log_severity severity, + grpc_server *server, + grpc_call **call, + grpc_call_details *details, + grpc_metadata_array *initial_metadata, + grpc_completion_queue *cq_bound_to_call, + grpc_completion_queue *cq_for_notification, + void *tag); + /* Set a context pointer. No thread safety guarantees are made wrt this value. */ void grpc_call_context_set(grpc_call *call, grpc_context_index elem, void *value, @@ -132,6 +142,9 @@ void *grpc_call_context_get(grpc_call *call, grpc_context_index elem); #define GRPC_CALL_LOG_BATCH(sev, call, ops, nops, tag) \ if (grpc_trace_batch) grpc_call_log_batch(sev, call, ops, nops, tag) +#define GRPC_SERVER_LOG_REQUEST_CALL(sev, server, call, details, initial_metadata, cq_bound_to_call, cq_for_notifications, tag) \ + if (grpc_trace_batch) grpc_server_log_request_call(sev, server, call, details, initial_metadata, cq_bound_to_call, cq_for_notifications, tag) + gpr_uint8 grpc_call_is_client(grpc_call *call); #endif /* GRPC_INTERNAL_CORE_SURFACE_CALL_H */ diff --git a/src/core/surface/call_log_batch.c b/src/core/surface/call_log_batch.c index e3b3f75b45..9905401bee 100644 --- a/src/core/surface/call_log_batch.c +++ b/src/core/surface/call_log_batch.c @@ -119,3 +119,19 @@ void grpc_call_log_batch(char *file, int line, gpr_log_severity severity, gpr_free(tmp); } } + +void grpc_server_log_request_call(char *file, int line, + gpr_log_severity severity, + grpc_server *server, + grpc_call **call, + grpc_call_details *details, + grpc_metadata_array *initial_metadata, + grpc_completion_queue *cq_bound_to_call, + grpc_completion_queue *cq_for_notification, + void *tag) { + gpr_log(file, line, severity, + "grpc_server_request_call(server=%p, call=%p, details=%p, " + "initial_metadata=%p, cq_bound_to_call=%p, cq_for_notification=%p, " + "tag=%p)", server, call, details, initial_metadata, + cq_bound_to_call, cq_for_notification, tag); +} diff --git a/src/core/surface/lame_client.c b/src/core/surface/lame_client.c index 3186292a02..a3b0b2672b 100644 --- a/src/core/surface/lame_client.c +++ b/src/core/surface/lame_client.c @@ -55,6 +55,7 @@ static void lame_start_transport_op(grpc_call_element *elem, channel_data *chand = elem->channel_data; GRPC_CALL_LOG_OP(GPR_INFO, elem, op); if (op->send_ops) { + grpc_stream_ops_unref_owned_objects(op->send_ops->ops, op->send_ops->nops); op->on_done_send(op->send_user_data, 0); } if (op->recv_ops) { diff --git a/src/core/surface/server.c b/src/core/surface/server.c index 24a23ae5c4..a60d5f7717 100644 --- a/src/core/surface/server.c +++ b/src/core/surface/server.c @@ -1010,6 +1010,9 @@ grpc_call_error grpc_server_request_call( grpc_completion_queue *cq_bound_to_call, grpc_completion_queue *cq_for_notification, void *tag) { requested_call rc; + GRPC_SERVER_LOG_REQUEST_CALL(GPR_INFO, server, call, details, + initial_metadata, cq_bound_to_call, + cq_for_notification, tag); grpc_cq_begin_op(cq_for_notification, NULL); rc.type = BATCH_CALL; rc.tag = tag; @@ -1128,3 +1131,12 @@ static void publish_registered_or_batch(grpc_call *call, int success, const grpc_channel_args *grpc_server_get_channel_args(grpc_server *server) { return server->channel_args; } + +int grpc_server_has_open_connections(grpc_server *server) { + int r; + gpr_mu_lock(&server->mu); + r = server->root_channel_data.next != &server->root_channel_data; + gpr_mu_unlock(&server->mu); + return r; +} + diff --git a/src/core/surface/server.h b/src/core/surface/server.h index c6331033e0..58f17272a4 100644 --- a/src/core/surface/server.h +++ b/src/core/surface/server.h @@ -62,4 +62,6 @@ grpc_transport_setup_result grpc_server_setup_transport( const grpc_channel_args *grpc_server_get_channel_args(grpc_server *server); +int grpc_server_has_open_connections(grpc_server *server); + #endif /* GRPC_INTERNAL_CORE_SURFACE_SERVER_H */ diff --git a/src/core/transport/chttp2/alpn.c b/src/core/transport/chttp2/alpn.c index 11901a58a0..3ccd5796ba 100644 --- a/src/core/transport/chttp2/alpn.c +++ b/src/core/transport/chttp2/alpn.c @@ -36,7 +36,8 @@ #include <grpc/support/useful.h> /* in order of preference */ -static const char *const supported_versions[] = {"h2-16", "h2-15", "h2-14"}; +static const char *const supported_versions[] = {"h2", "h2-17", "h2-16", + "h2-15", "h2-14"}; int grpc_chttp2_is_alpn_version_supported(const char *version, size_t size) { size_t i; diff --git a/src/core/tsi/ssl_transport_security.c b/src/core/tsi/ssl_transport_security.c index 9718a0b048..63b4c42131 100644 --- a/src/core/tsi/ssl_transport_security.c +++ b/src/core/tsi/ssl_transport_security.c @@ -639,7 +639,7 @@ static tsi_result ssl_protector_protect(tsi_frame_protector* self, tsi_result result = TSI_OK; /* First see if we have some pending data in the SSL BIO. */ - size_t pending_in_ssl = BIO_ctrl_pending(impl->from_ssl); + size_t pending_in_ssl = BIO_pending(impl->from_ssl); if (pending_in_ssl > 0) { *unprotected_bytes_size = 0; read_from_ssl = BIO_read(impl->from_ssl, protected_output_frames, @@ -694,7 +694,7 @@ static tsi_result ssl_protector_protect_flush( impl->buffer_offset = 0; } - *still_pending_size = BIO_ctrl_pending(impl->from_ssl); + *still_pending_size = BIO_pending(impl->from_ssl); if (*still_pending_size == 0) return TSI_OK; read_from_ssl = BIO_read(impl->from_ssl, protected_output_frames, @@ -704,7 +704,7 @@ static tsi_result ssl_protector_protect_flush( return TSI_INTERNAL_ERROR; } *protected_output_frames_size = read_from_ssl; - *still_pending_size = BIO_ctrl_pending(impl->from_ssl); + *still_pending_size = BIO_pending(impl->from_ssl); return TSI_OK; } @@ -782,7 +782,7 @@ static tsi_result ssl_handshaker_get_bytes_to_send_to_peer(tsi_handshaker* self, } } *bytes_size = (size_t)bytes_read_from_ssl; - return BIO_ctrl_pending(impl->from_ssl) == 0 ? TSI_OK : TSI_INCOMPLETE_DATA; + return BIO_pending(impl->from_ssl) == 0 ? TSI_OK : TSI_INCOMPLETE_DATA; } static tsi_result ssl_handshaker_get_result(tsi_handshaker* self) { @@ -818,7 +818,7 @@ static tsi_result ssl_handshaker_process_bytes_from_peer( ssl_result = SSL_get_error(impl->ssl, ssl_result); switch (ssl_result) { case SSL_ERROR_WANT_READ: - if (BIO_ctrl_pending(impl->from_ssl) == 0) { + if (BIO_pending(impl->from_ssl) == 0) { /* We need more data. */ return TSI_INCOMPLETE_DATA; } else { diff --git a/src/cpp/server/server.cc b/src/cpp/server/server.cc index e66b4ed2d8..80eb488b41 100644 --- a/src/cpp/server/server.cc +++ b/src/cpp/server/server.cc @@ -67,6 +67,10 @@ class Server::SyncRequest GRPC_FINAL : public CompletionQueueTag { grpc_metadata_array_init(&request_metadata_); } + ~SyncRequest() { + grpc_metadata_array_destroy(&request_metadata_); + } + static SyncRequest* Wait(CompletionQueue* cq, bool* ok) { void* tag = nullptr; *ok = false; diff --git a/src/csharp/README.md b/src/csharp/README.md index 43d519349f..bb5e165986 100644 --- a/src/csharp/README.md +++ b/src/csharp/README.md @@ -35,15 +35,16 @@ Usage: Linux (Mono) - (preferred approach) add `libgrpc_csharp_ext.so` to `/etc/ld.so.cache` by running: ```sh - echo "$HOME/.linuxbrew/lib" | sudo tee /etc/ld.so.conf.d/zzz_brew_lib.conf - sudo ldconfig + $ echo "$HOME/.linuxbrew/lib" | sudo tee /etc/ld.so.conf.d/zzz_brew_lib.conf + $ sudo ldconfig ``` - (adhoc approach) set `LD_LIBRARY_PATH` environment variable to point to directory containing `libgrpc_csharp_ext.so`: ```sh - export LD_LIBRARY_PATH=$HOME/.linuxbrew/lib:${LD_LIBRARY_PATH} + $ export LD_LIBRARY_PATH=$HOME/.linuxbrew/lib:${LD_LIBRARY_PATH} ``` + - (if you are contributor) installing gRPC from sources using `sudo make install_grpc_csharp_ext` also works. - Open MonoDevelop and start a new project/solution. @@ -87,14 +88,14 @@ If you are a user of gRPC C#, go to Usage section above. a convenience batch script that builds everything for you. ``` - buildall.bat + > buildall.bat ``` - Open Grpc.sln using Visual Studio 2013. NuGet dependencies will be restored upon build (you need to have NuGet add-in installed). -Building: Linux & Mono +Building: Linux (Mono) ---------------------- You only need to go through these steps if you are planning to develop gRPC C#. @@ -103,8 +104,8 @@ If you are a user of gRPC C#, go to Usage section above. - Prerequisites for development: Mono 3.2.8+, MonoDevelop 5.9 with NuGet and NUnit add-ins installed. ```sh - sudo apt-get install mono-devel - sudo apt-get install nunit nunit-console + $ sudo apt-get install mono-devel + $ sudo apt-get install nunit nunit-console ``` You can use older versions of MonoDevelop, but then you might need to restore @@ -114,8 +115,8 @@ don't support NuGet add-in. - Compile and install the gRPC C# extension library (that will be used via P/Invoke from C#). ```sh - make grpc_csharp_ext - sudo make install_grpc_csharp_ext + $ make grpc_csharp_ext + $ sudo make install_grpc_csharp_ext ``` - Use MonoDevelop to open the solution Grpc.sln @@ -135,9 +136,9 @@ Then you should be able to run all the test from the Test View. After building the solution, you can also run the tests from command line using nunit-console tool. -``` +```sh # from Grpc.Core.Test/bin/Debug directory -nunit-console Grpc.Core.Tests.dll +$ nunit-console Grpc.Core.Tests.dll ``` Contents diff --git a/src/objective-c/ProtoRPC/ProtoRPC.m b/src/objective-c/ProtoRPC/ProtoRPC.m index 96608f2898..b8f8008422 100644 --- a/src/objective-c/ProtoRPC/ProtoRPC.m +++ b/src/objective-c/ProtoRPC/ProtoRPC.m @@ -59,7 +59,7 @@ responseClass:(Class)responseClass responsesWriteable:(id<GRXWriteable>)responsesWriteable { // Because we can't tell the type system to constrain the class, we need to check at runtime: - if (![responseClass respondsToSelector:@selector(parseFromData:)]) { + if (![responseClass respondsToSelector:@selector(parseFromData:error:)]) { [NSException raise:NSInvalidArgumentException format:@"A protobuf class to parse the responses must be provided."]; } @@ -71,7 +71,7 @@ if ((self = [super initWithHost:host method:method requestsWriter:bytesWriter])) { // A writeable that parses the proto messages received. _responseWriteable = [[GRXWriteable alloc] initWithValueHandler:^(NSData *value) { - [responsesWriteable writeValue:[responseClass parseFromData:value]]; + [responsesWriteable writeValue:[responseClass parseFromData:value error:NULL]]; } completionHandler:^(NSError *errorOrNil) { [responsesWriteable writesFinishedWithError:errorOrNil]; }]; diff --git a/src/objective-c/examples/Sample/Sample/ViewController.m b/src/objective-c/examples/Sample/Sample/ViewController.m index 1c866babec..9b331fe43f 100644 --- a/src/objective-c/examples/Sample/Sample/ViewController.m +++ b/src/objective-c/examples/Sample/Sample/ViewController.m @@ -80,7 +80,7 @@ requestsWriter:requestsWriter]; id<GRXWriteable> responsesWriteable = [[GRXWriteable alloc] initWithValueHandler:^(NSData *value) { - RMTSimpleResponse *response = [RMTSimpleResponse parseFromData:value]; + RMTSimpleResponse *response = [RMTSimpleResponse parseFromData:value error:NULL]; NSLog(@"Received response:\n%@", response); } completionHandler:^(NSError *errorOrNil) { if (errorOrNil) { diff --git a/src/objective-c/examples/Sample/SampleTests/RemoteTests.m b/src/objective-c/examples/Sample/SampleTests/RemoteTests.m index 553c813b0b..ceb72cfaec 100644 --- a/src/objective-c/examples/Sample/SampleTests/RemoteTests.m +++ b/src/objective-c/examples/Sample/SampleTests/RemoteTests.m @@ -125,7 +125,7 @@ XCTAssertNotNil(value, @"nil value received as response."); [response fulfill]; XCTAssertGreaterThan(value.length, 0, @"Empty response received."); - RMTSimpleResponse *response = [RMTSimpleResponse parseFromData:value]; + RMTSimpleResponse *response = [RMTSimpleResponse parseFromData:value error:NULL]; // We expect empty strings, not nil: XCTAssertNotNil(response.username, @"Response's username is nil."); XCTAssertNotNil(response.oauthScope, @"Response's OAuth scope is nil."); diff --git a/src/objective-c/examples/Sample/SampleTests/SampleTests.m b/src/objective-c/examples/Sample/SampleTests/SampleTests.m index b1a0f78a01..83cfd8c1b5 100644 --- a/src/objective-c/examples/Sample/SampleTests/SampleTests.m +++ b/src/objective-c/examples/Sample/SampleTests/SampleTests.m @@ -123,7 +123,7 @@ id<GRXWriteable> responsesWriteable = [[GRXWriteable alloc] initWithValueHandler:^(NSData *value) { XCTAssertNotNil(value, @"nil value received as response."); - RGDFeature *feature = [RGDFeature parseFromData:value]; + RGDFeature *feature = [RGDFeature parseFromData:value error:NULL]; XCTAssertEqualObjects(point, feature.location); XCTAssertNotNil(feature.name, @"Response's name is nil."); [response fulfill]; diff --git a/src/php/bin/run_gen_code_test.sh b/src/php/bin/run_gen_code_test.sh index 79abbe6cf8..4882a2b846 100755 --- a/src/php/bin/run_gen_code_test.sh +++ b/src/php/bin/run_gen_code_test.sh @@ -29,9 +29,9 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. cd $(dirname $0) -GRPC_TEST_HOST=localhost:7070 php -d extension_dir=../ext/grpc/modules/ \ +GRPC_TEST_HOST=localhost:50051 php -d extension_dir=../ext/grpc/modules/ \ -d extension=grpc.so /usr/local/bin/phpunit -v --debug --strict \ ../tests/generated_code/GeneratedCodeTest.php -GRPC_TEST_HOST=localhost:7070 php -d extension_dir=../ext/grpc/modules/ \ +GRPC_TEST_HOST=localhost:50051 php -d extension_dir=../ext/grpc/modules/ \ -d extension=grpc.so /usr/local/bin/phpunit -v --debug --strict \ ../tests/generated_code/GeneratedCodeWithCallbackTest.php diff --git a/src/python/interop/interop/_insecure_interop_test.py b/src/python/interop/interop/_insecure_interop_test.py index 42e7a4d5c4..98ea3a6648 100644 --- a/src/python/interop/interop/_insecure_interop_test.py +++ b/src/python/interop/interop/_insecure_interop_test.py @@ -54,4 +54,4 @@ class InsecureInteropTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/interop/interop/_secure_interop_test.py b/src/python/interop/interop/_secure_interop_test.py index 27e76315b6..be7618f549 100644 --- a/src/python/interop/interop/_secure_interop_test.py +++ b/src/python/interop/interop/_secure_interop_test.py @@ -61,4 +61,4 @@ class SecureInteropTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_blocking_invocation_inline_service_test.py b/src/python/src/grpc/_adapter/_blocking_invocation_inline_service_test.py index 3cd51928d3..7a8ff0ad89 100644 --- a/src/python/src/grpc/_adapter/_blocking_invocation_inline_service_test.py +++ b/src/python/src/grpc/_adapter/_blocking_invocation_inline_service_test.py @@ -43,4 +43,4 @@ class BlockingInvocationInlineServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_c_test.py b/src/python/src/grpc/_adapter/_c_test.py index 6e15adbda8..b06215f0e5 100644 --- a/src/python/src/grpc/_adapter/_c_test.py +++ b/src/python/src/grpc/_adapter/_c_test.py @@ -216,4 +216,4 @@ class _CTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_event_invocation_synchronous_event_service_test.py b/src/python/src/grpc/_adapter/_event_invocation_synchronous_event_service_test.py index b9a13ce69f..b8ceb75d68 100644 --- a/src/python/src/grpc/_adapter/_event_invocation_synchronous_event_service_test.py +++ b/src/python/src/grpc/_adapter/_event_invocation_synchronous_event_service_test.py @@ -43,4 +43,4 @@ class EventInvocationSynchronousEventServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_future_invocation_asynchronous_event_service_test.py b/src/python/src/grpc/_adapter/_future_invocation_asynchronous_event_service_test.py index 7d6a4ffc17..3773e65575 100644 --- a/src/python/src/grpc/_adapter/_future_invocation_asynchronous_event_service_test.py +++ b/src/python/src/grpc/_adapter/_future_invocation_asynchronous_event_service_test.py @@ -43,4 +43,4 @@ class FutureInvocationAsynchronousEventServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_links_test.py b/src/python/src/grpc/_adapter/_links_test.py index 4fd76f60f8..50257d8691 100644 --- a/src/python/src/grpc/_adapter/_links_test.py +++ b/src/python/src/grpc/_adapter/_links_test.py @@ -274,4 +274,4 @@ class RoundTripTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_lonely_rear_link_test.py b/src/python/src/grpc/_adapter/_lonely_rear_link_test.py index bdb1ee2379..7f5021f40e 100644 --- a/src/python/src/grpc/_adapter/_lonely_rear_link_test.py +++ b/src/python/src/grpc/_adapter/_lonely_rear_link_test.py @@ -97,4 +97,4 @@ class LonelyRearLinkTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/_adapter/_low_test.py b/src/python/src/grpc/_adapter/_low_test.py index 09c4660a2b..d4b628c2ae 100644 --- a/src/python/src/grpc/_adapter/_low_test.py +++ b/src/python/src/grpc/_adapter/_low_test.py @@ -412,4 +412,4 @@ class ExpirationTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/early_adopter/implementations_test.py b/src/python/src/grpc/early_adopter/implementations_test.py index 32b974724c..49f0e949c4 100644 --- a/src/python/src/grpc/early_adopter/implementations_test.py +++ b/src/python/src/grpc/early_adopter/implementations_test.py @@ -177,4 +177,4 @@ class EarlyAdopterImplementationsTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/base/implementations_test.py b/src/python/src/grpc/framework/base/implementations_test.py index d40bb4d92e..72087f4456 100644 --- a/src/python/src/grpc/framework/base/implementations_test.py +++ b/src/python/src/grpc/framework/base/implementations_test.py @@ -77,4 +77,4 @@ class ImplementationsTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/face/blocking_invocation_inline_service_test.py b/src/python/src/grpc/framework/face/blocking_invocation_inline_service_test.py index 636cd701ff..763f0f0edc 100644 --- a/src/python/src/grpc/framework/face/blocking_invocation_inline_service_test.py +++ b/src/python/src/grpc/framework/face/blocking_invocation_inline_service_test.py @@ -43,4 +43,4 @@ class BlockingInvocationInlineServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/face/event_invocation_synchronous_event_service_test.py b/src/python/src/grpc/framework/face/event_invocation_synchronous_event_service_test.py index 25f3e297b5..e1ab3cf711 100644 --- a/src/python/src/grpc/framework/face/event_invocation_synchronous_event_service_test.py +++ b/src/python/src/grpc/framework/face/event_invocation_synchronous_event_service_test.py @@ -43,4 +43,4 @@ class EventInvocationSynchronousEventServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/face/future_invocation_asynchronous_event_service_test.py b/src/python/src/grpc/framework/face/future_invocation_asynchronous_event_service_test.py index 38229ea9f4..2d13bb911d 100644 --- a/src/python/src/grpc/framework/face/future_invocation_asynchronous_event_service_test.py +++ b/src/python/src/grpc/framework/face/future_invocation_asynchronous_event_service_test.py @@ -43,4 +43,4 @@ class FutureInvocationAsynchronousEventServiceTest( if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/foundation/_later_test.py b/src/python/src/grpc/framework/foundation/_later_test.py index e83e703128..6c2459e185 100644 --- a/src/python/src/grpc/framework/foundation/_later_test.py +++ b/src/python/src/grpc/framework/foundation/_later_test.py @@ -148,4 +148,4 @@ class LaterTest(unittest.TestCase): self.assertEqual(return_value, future_passed_to_callback_cell[0].result()) if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/src/python/src/grpc/framework/foundation/_logging_pool_test.py b/src/python/src/grpc/framework/foundation/_logging_pool_test.py index c92cf8c0ab..452802da6a 100644 --- a/src/python/src/grpc/framework/foundation/_logging_pool_test.py +++ b/src/python/src/grpc/framework/foundation/_logging_pool_test.py @@ -61,4 +61,4 @@ class LoggingPoolTest(unittest.TestCase): if __name__ == '__main__': - unittest.main() + unittest.main(verbosity=2) diff --git a/templates/tools/doxygen/Doxyfile.c++.template b/templates/tools/doxygen/Doxyfile.c++.template new file mode 100644 index 0000000000..fca30632a3 --- /dev/null +++ b/templates/tools/doxygen/Doxyfile.c++.template @@ -0,0 +1,2 @@ +<%namespace file="Doxyfile.include" import="gen_doxyfile"/>\ +${gen_doxyfile(['grpc++'], 'C++', libs)} diff --git a/templates/tools/doxygen/Doxyfile.core.template b/templates/tools/doxygen/Doxyfile.core.template new file mode 100644 index 0000000000..205f892287 --- /dev/null +++ b/templates/tools/doxygen/Doxyfile.core.template @@ -0,0 +1,2 @@ +<%namespace file="Doxyfile.include" import="gen_doxyfile"/>\ +${gen_doxyfile(['grpc', 'gpr'], 'Core', libs)} diff --git a/templates/tools/doxygen/Doxyfile.include b/templates/tools/doxygen/Doxyfile.include new file mode 100644 index 0000000000..3c15487f4b --- /dev/null +++ b/templates/tools/doxygen/Doxyfile.include @@ -0,0 +1,2375 @@ +<%def name="gen_doxyfile(libnames, packagename, collection)"> +<% + import itertools + targets = [] + for libname in libnames: + target = None + for p in collection: + if p.name == libname: + target = p + assert(target) + targets.append(target) +%> +# Doxyfile 1.8.9.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "GRPC ${packagename}" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = ${settings.version.major}.${settings.version.minor}.${settings.version.micro}.${settings.version.build} + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/ref/${packagename.lower()} + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 2 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ${' '.join(itertools.chain.from_iterable(target.public_headers for target in targets))} + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = GRPC_FINAL= GRPC_OVERIDE= + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES +</%def> diff --git a/templates/vsprojects/grpc.sln.template b/templates/vsprojects/grpc.sln.template index 7465852e70..70be6b4f7a 100644 --- a/templates/vsprojects/grpc.sln.template +++ b/templates/vsprojects/grpc.sln.template @@ -1,48 +1,5 @@ -## Template for Visual Studio solution -## based on http://msdn.microsoft.com/en-us/library/bb165951(v=vs.90).aspx -## NOTE: tabs in this file are needed by Visual Studio to correctly interpret -## the file. - -Microsoft Visual Studio Solution File, Format Version 12.00 -# Visual Studio 2013 -VisualStudioVersion = 12.0.21005.1 -MinimumVisualStudioVersion = 10.0.40219.1 +<%namespace file="sln_defs.include" import="gen_solution"/>\ <% -## Visual Studio uses GUIDs for project types -## http://msdn.microsoft.com/en-us/library/hb23x61k%28v=vs.80%29.aspx -cpp_proj_type = "{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}" +solution_projects = [p for p in vsprojects if p.build != 'protoc'] %>\ -% for project in vsprojects: -Project("${cpp_proj_type}") = "${project.name}", "${project.name}\${project.name}.vcxproj", "${project.vs_project_guid}" - % if project.get('deps', None): - ProjectSection(ProjectDependencies) = postProject - % for dep in project.get('deps', []): - ${vsproject_dict[dep].vs_project_guid} = ${vsproject_dict[dep].vs_project_guid} - % endfor - EndProjectSection - % endif -EndProject -% endfor -Global - GlobalSection(SolutionConfigurationPlatforms) = preSolution - Debug|Win32 = Debug|Win32 - Debug|x64 = Debug|x64 - Release|Win32 = Release|Win32 - Release|x64 = Release|x64 - EndGlobalSection - GlobalSection(ProjectConfigurationPlatforms) = postSolution -% for project in vsprojects: - ${project.vs_project_guid}.Debug|Win32.ActiveCfg = Debug|Win32 - ${project.vs_project_guid}.Debug|Win32.Build.0 = Debug|Win32 - ${project.vs_project_guid}.Debug|x64.ActiveCfg = Debug|x64 - ${project.vs_project_guid}.Debug|x64.Build.0 = Debug|x64 - ${project.vs_project_guid}.Release|Win32.ActiveCfg = Release|Win32 - ${project.vs_project_guid}.Release|Win32.Build.0 = Release|Win32 - ${project.vs_project_guid}.Release|x64.ActiveCfg = Release|x64 - ${project.vs_project_guid}.Release|x64.Build.0 = Release|x64 -% endfor - EndGlobalSection - GlobalSection(SolutionProperties) = preSolution - HideSolutionNode = FALSE - EndGlobalSection -EndGlobal +${gen_solution(solution_projects)}
\ No newline at end of file diff --git a/templates/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj.template b/templates/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj.template new file mode 100644 index 0000000000..49ab1b7385 --- /dev/null +++ b/templates/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_cpp_plugin', targets, configuration_type='Application')} diff --git a/templates/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj.template b/templates/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj.template new file mode 100644 index 0000000000..9d94e27c3a --- /dev/null +++ b/templates/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_csharp_plugin', targets, configuration_type='Application')} diff --git a/templates/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj.template b/templates/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj.template new file mode 100644 index 0000000000..794c7310c5 --- /dev/null +++ b/templates/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_objective_c_plugin', targets, configuration_type='Application')} diff --git a/templates/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj.template b/templates/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj.template new file mode 100644 index 0000000000..409e88f289 --- /dev/null +++ b/templates/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_plugin_support', libs)} diff --git a/templates/vsprojects/grpc_protoc_plugins.sln.template b/templates/vsprojects/grpc_protoc_plugins.sln.template new file mode 100644 index 0000000000..1c171f4f94 --- /dev/null +++ b/templates/vsprojects/grpc_protoc_plugins.sln.template @@ -0,0 +1,5 @@ +<%namespace file="sln_defs.include" import="gen_solution"/>\ +<% +solution_projects = [p for p in vsprojects if p.build == 'protoc'] +%>\ +${gen_solution(solution_projects)}
\ No newline at end of file diff --git a/templates/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj.template b/templates/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj.template new file mode 100644 index 0000000000..977e015d6d --- /dev/null +++ b/templates/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_python_plugin', targets, configuration_type='Application')} diff --git a/templates/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj.template b/templates/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj.template new file mode 100644 index 0000000000..ecf42ae04e --- /dev/null +++ b/templates/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj.template @@ -0,0 +1,2 @@ +<%namespace file="../vcxproj_defs.include" import="gen_project"/>\ +${gen_project('grpc_ruby_plugin', targets, configuration_type='Application')} diff --git a/templates/vsprojects/sln_defs.include b/templates/vsprojects/sln_defs.include new file mode 100644 index 0000000000..ee05d0fbde --- /dev/null +++ b/templates/vsprojects/sln_defs.include @@ -0,0 +1,50 @@ +<%def name="gen_solution(solution_projects)">\ +## Template for Visual Studio solution +## based on http://msdn.microsoft.com/en-us/library/bb165951(v=vs.90).aspx +## NOTE: tabs in this file are needed by Visual Studio to correctly interpret +## the file. + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 2013 +VisualStudioVersion = 12.0.21005.1 +MinimumVisualStudioVersion = 10.0.40219.1 +<% +## Visual Studio uses GUIDs for project types +## http://msdn.microsoft.com/en-us/library/hb23x61k%28v=vs.80%29.aspx +cpp_proj_type = "{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}" +%>\ +% for project in solution_projects: +Project("${cpp_proj_type}") = "${project.name}", "${project.name}\${project.name}.vcxproj", "${project.vs_project_guid}" + % if project.get('deps', None): + ProjectSection(ProjectDependencies) = postProject + % for dep in project.get('deps', []): + ${vsproject_dict[dep].vs_project_guid} = ${vsproject_dict[dep].vs_project_guid} + % endfor + EndProjectSection + % endif +EndProject +% endfor +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution +% for project in solution_projects: + ${project.vs_project_guid}.Debug|Win32.ActiveCfg = Debug|Win32 + ${project.vs_project_guid}.Debug|Win32.Build.0 = Debug|Win32 + ${project.vs_project_guid}.Debug|x64.ActiveCfg = Debug|x64 + ${project.vs_project_guid}.Debug|x64.Build.0 = Debug|x64 + ${project.vs_project_guid}.Release|Win32.ActiveCfg = Release|Win32 + ${project.vs_project_guid}.Release|Win32.Build.0 = Release|Win32 + ${project.vs_project_guid}.Release|x64.ActiveCfg = Release|x64 + ${project.vs_project_guid}.Release|x64.Build.0 = Release|x64 +% endfor + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal +</%def>\
\ No newline at end of file diff --git a/templates/vsprojects/vcxproj_defs.include b/templates/vsprojects/vcxproj_defs.include index 87412debda..55ec37393f 100644 --- a/templates/vsprojects/vcxproj_defs.include +++ b/templates/vsprojects/vcxproj_defs.include @@ -19,7 +19,10 @@ if not project_guid: project_guid = project.vs_project_guid if configuration_type == 'Application': - props.extend(['winsock', 'protobuf', 'zlib', 'openssl']) + if target.build == 'protoc': + props.extend(['protoc']) + else: + props.extend(['winsock', 'protobuf', 'zlib', 'openssl']) if target.language == 'c++': props.extend(['protobuf']) props.extend(['global']) diff --git a/test/compiler/python_plugin_test.py b/test/compiler/python_plugin_test.py index ad3bebac30..367effdb1a 100644 --- a/test/compiler/python_plugin_test.py +++ b/test/compiler/python_plugin_test.py @@ -520,4 +520,4 @@ class PythonPluginTest(unittest.TestCase): if __name__ == '__main__': os.chdir(os.path.dirname(sys.argv[0])) - unittest.main() + unittest.main(verbosity=2) diff --git a/test/core/bad_client/bad_client.c b/test/core/bad_client/bad_client.c new file mode 100644 index 0000000000..c3725b5909 --- /dev/null +++ b/test/core/bad_client/bad_client.c @@ -0,0 +1,136 @@ +/* + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "test/core/bad_client/bad_client.h" + +#include "src/core/channel/channel_stack.h" +#include "src/core/channel/http_server_filter.h" +#include "src/core/iomgr/endpoint_pair.h" +#include "src/core/surface/completion_queue.h" +#include "src/core/surface/server.h" +#include "src/core/transport/chttp2_transport.h" + +#include <grpc/support/sync.h> +#include <grpc/support/thd.h> + +typedef struct { + grpc_server *server; + grpc_completion_queue *cq; + grpc_bad_client_server_side_validator validator; + gpr_event done_thd; + gpr_event done_write; +} thd_args; + +static void thd_func(void *arg) { + thd_args *a = arg; + a->validator(a->server, a->cq); + gpr_event_set(&a->done_thd, (void *)1); +} + +static void done_write(void *arg, grpc_endpoint_cb_status status) { + thd_args *a = arg; + gpr_event_set(&a->done_write, (void *)1); +} + +static grpc_transport_setup_result server_setup_transport( + void *ts, grpc_transport *transport, grpc_mdctx *mdctx) { + thd_args *a = ts; + static grpc_channel_filter const *extra_filters[] = { + &grpc_http_server_filter}; + return grpc_server_setup_transport(a->server, transport, extra_filters, + GPR_ARRAY_SIZE(extra_filters), mdctx); +} + +void grpc_run_bad_client_test(const char *name, const char *client_payload, + size_t client_payload_length, + grpc_bad_client_server_side_validator validator) { + grpc_endpoint_pair sfd; + thd_args a; + gpr_thd_id id; + gpr_slice slice = + gpr_slice_from_copied_buffer(client_payload, client_payload_length); + + /* Add a debug log */ + gpr_log(GPR_INFO, "TEST: %s", name); + + /* Init grpc */ + grpc_init(); + + /* Create endpoints */ + sfd = grpc_iomgr_create_endpoint_pair(65536); + + /* Create server, completion events */ + a.server = grpc_server_create_from_filters(NULL, 0, NULL); + a.cq = grpc_completion_queue_create(); + gpr_event_init(&a.done_thd); + gpr_event_init(&a.done_write); + a.validator = validator; + grpc_server_register_completion_queue(a.server, a.cq); + grpc_server_start(a.server); + grpc_create_chttp2_transport(server_setup_transport, &a, NULL, sfd.server, + NULL, 0, grpc_mdctx_create(), 0); + + /* Bind everything into the same pollset */ + grpc_endpoint_add_to_pollset(sfd.client, grpc_cq_pollset(a.cq)); + grpc_endpoint_add_to_pollset(sfd.server, grpc_cq_pollset(a.cq)); + + /* Check a ground truth */ + GPR_ASSERT(grpc_server_has_open_connections(a.server)); + + /* Start validator */ + gpr_thd_new(&id, thd_func, &a, NULL); + + /* Write data */ + switch (grpc_endpoint_write(sfd.client, &slice, 1, done_write, &a)) { + case GRPC_ENDPOINT_WRITE_DONE: + done_write(&a, 1); + break; + case GRPC_ENDPOINT_WRITE_PENDING: + break; + case GRPC_ENDPOINT_WRITE_ERROR: + done_write(&a, 0); + break; + } + + /* Await completion */ + GPR_ASSERT( + gpr_event_wait(&a.done_write, GRPC_TIMEOUT_SECONDS_TO_DEADLINE(5))); + GPR_ASSERT(gpr_event_wait(&a.done_thd, GRPC_TIMEOUT_SECONDS_TO_DEADLINE(5))); + + /* Shutdown */ + grpc_endpoint_destroy(sfd.client); + grpc_server_destroy(a.server); + grpc_completion_queue_destroy(a.cq); + + grpc_shutdown(); +} diff --git a/test/core/bad_client/bad_client.h b/test/core/bad_client/bad_client.h new file mode 100644 index 0000000000..4834e86cce --- /dev/null +++ b/test/core/bad_client/bad_client.h @@ -0,0 +1,52 @@ +/* + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef GRPC_TEST_CORE_BAD_CLIENT_BAD_CLIENT_H +#define GRPC_TEST_CORE_BAD_CLIENT_BAD_CLIENT_H + +#include <grpc/grpc.h> +#include "test/core/util/test_config.h" + +typedef void (*grpc_bad_client_server_side_validator)( + grpc_server *server, grpc_completion_queue *cq); + +/* Test runner. + + Create a server, and send client_payload to it as bytes from a client. + Execute validator in a separate thread to assert that the bytes are + handled as expected. */ +void grpc_run_bad_client_test(const char *name, const char *client_payload, + size_t client_payload_length, + grpc_bad_client_server_side_validator validator); + +#endif /* GRPC_TEST_CORE_BAD_CLIENT_BAD_CLIENT_H */ diff --git a/test/core/bad_client/gen_build_json.py b/test/core/bad_client/gen_build_json.py new file mode 100755 index 0000000000..67969a1a12 --- /dev/null +++ b/test/core/bad_client/gen_build_json.py @@ -0,0 +1,79 @@ +#!/usr/bin/env python +# Copyright 2015, Google Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following disclaimer +# in the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Google Inc. nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +"""Generates the appropriate build.json data for all the end2end tests.""" + + +import simplejson +import collections + +TestOptions = collections.namedtuple('TestOptions', 'flaky') +default_test_options = TestOptions(False) + +# maps test names to options +BAD_CLIENT_TESTS = { + 'connection_prefix': default_test_options, +} + +def main(): + json = { + '#': 'generated with test/bad_client/gen_build_json.py', + 'libs': [ + { + 'name': 'bad_client_test', + 'build': 'private', + 'language': 'c', + 'src': [ + 'test/core/bad_client/bad_client.c' + ] + }], + 'targets': [ + { + 'name': '%s_bad_client_test' % t, + 'build': 'test', + 'language': 'c', + 'secure': 'no', + 'src': ['test/core/bad_client/tests/%s.c' % t], + 'flaky': 'invoke_large_request' in t, + 'deps': [ + 'bad_client_test', + 'grpc_test_util_unsecure', + 'grpc_unsecure', + 'gpr_test_util', + 'gpr' + ] + } + for t in sorted(BAD_CLIENT_TESTS.keys())]} + print simplejson.dumps(json, sort_keys=True, indent=2 * ' ') + + +if __name__ == '__main__': + main() diff --git a/test/core/bad_client/tests/connection_prefix.c b/test/core/bad_client/tests/connection_prefix.c new file mode 100644 index 0000000000..e8bf935710 --- /dev/null +++ b/test/core/bad_client/tests/connection_prefix.c @@ -0,0 +1,79 @@ +/* + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "test/core/bad_client/bad_client.h" +#include "src/core/surface/server.h" + +static void verifier(grpc_server *server, grpc_completion_queue *cq) { + while (grpc_server_has_open_connections(server)) { + GPR_ASSERT(grpc_completion_queue_next( + cq, GRPC_TIMEOUT_MILLIS_TO_DEADLINE(20)).type == + GRPC_QUEUE_TIMEOUT); + } +} + +int main(int argc, char **argv) { + grpc_test_init(argc, argv); + + grpc_run_bad_client_test("conpfx_1", "X", 1, verifier); + grpc_run_bad_client_test("conpfx_2", "PX", 2, verifier); + grpc_run_bad_client_test("conpfx_3", "PRX", 3, verifier); + grpc_run_bad_client_test("conpfx_4", "PRIX", 4, verifier); + grpc_run_bad_client_test("conpfx_5", "PRI X", 5, verifier); + grpc_run_bad_client_test("conpfx_6", "PRI *X", 6, verifier); + grpc_run_bad_client_test("conpfx_7", "PRI * X", 7, verifier); + grpc_run_bad_client_test("conpfx_8", "PRI * HX", 8, verifier); + grpc_run_bad_client_test("conpfx_9", "PRI * HTX", 9, verifier); + grpc_run_bad_client_test("conpfx_10", "PRI * HTTX", 10, verifier); + grpc_run_bad_client_test("conpfx_11", "PRI * HTTPX", 11, verifier); + grpc_run_bad_client_test("conpfx_12", "PRI * HTTP/X", 12, verifier); + grpc_run_bad_client_test("conpfx_13", "PRI * HTTP/2X", 13, verifier); + grpc_run_bad_client_test("conpfx_14", "PRI * HTTP/2.X", 14, verifier); + grpc_run_bad_client_test("conpfx_15", "PRI * HTTP/2.0X", 15, verifier); + grpc_run_bad_client_test("conpfx_16", "PRI * HTTP/2.0\rX", 16, verifier); + grpc_run_bad_client_test("conpfx_17", "PRI * HTTP/2.0\r\nX", 17, verifier); + grpc_run_bad_client_test("conpfx_18", "PRI * HTTP/2.0\r\n\rX", 18, verifier); + grpc_run_bad_client_test("conpfx_19", "PRI * HTTP/2.0\r\n\r\nX", 19, + verifier); + grpc_run_bad_client_test("conpfx_20", "PRI * HTTP/2.0\r\n\r\nSX", 20, + verifier); + grpc_run_bad_client_test("conpfx_21", "PRI * HTTP/2.0\r\n\r\nSMX", 21, + verifier); + grpc_run_bad_client_test("conpfx_22", "PRI * HTTP/2.0\r\n\r\nSM\rX", 22, + verifier); + grpc_run_bad_client_test("conpfx_23", "PRI * HTTP/2.0\r\n\r\nSM\r\nX", 23, + verifier); + grpc_run_bad_client_test("conpfx_24", "PRI * HTTP/2.0\r\n\r\nSM\r\n\rX", 24, + verifier); + return 0; +} diff --git a/test/core/support/cmdline_test.c b/test/core/support/cmdline_test.c index a7767ace5e..26153b192c 100644 --- a/test/core/support/cmdline_test.c +++ b/test/core/support/cmdline_test.c @@ -35,6 +35,7 @@ #include <string.h> +#include <grpc/support/alloc.h> #include <grpc/support/log.h> #include <grpc/support/useful.h> #include "test/core/util/test_config.h" @@ -272,6 +273,27 @@ static void test_many(void) { gpr_cmdline_destroy(cl); } +static void test_usage(void) { + gpr_cmdline *cl; + char *usage; + + char *str = NULL; + int x = 0; + int flag = 2; + + cl = gpr_cmdline_create(NULL); + gpr_cmdline_add_string(cl, "str", NULL, &str); + gpr_cmdline_add_int(cl, "x", NULL, &x); + gpr_cmdline_add_flag(cl, "flag", NULL, &flag); + + usage = gpr_cmdline_usage_string(cl, "test"); + GPR_ASSERT(0 == strcmp(usage, + "Usage: test [--str=string] [--x=int] [--flag|--no-flag]\n")); + gpr_free(usage); + + gpr_cmdline_destroy(cl); +} + int main(int argc, char **argv) { grpc_test_init(argc, argv); test_simple_int(); @@ -289,5 +311,6 @@ int main(int argc, char **argv) { test_flag_val_true(); test_flag_val_false(); test_many(); + test_usage(); return 0; } diff --git a/test/cpp/end2end/server_crash_test.cc b/test/cpp/end2end/server_crash_test.cc index 11d73aec7d..3fdae9bc07 100644 --- a/test/cpp/end2end/server_crash_test.cc +++ b/test/cpp/end2end/server_crash_test.cc @@ -69,10 +69,15 @@ namespace testing { namespace { -class ServiceImpl GRPC_FINAL : public ::grpc::cpp::test::util::TestService::Service { +class ServiceImpl GRPC_FINAL + : public ::grpc::cpp::test::util::TestService::Service { + public: + ServiceImpl() : bidi_stream_count_(0), response_stream_count_(0) {} + Status BidiStream(ServerContext* context, ServerReaderWriter<EchoResponse, EchoRequest>* stream) GRPC_OVERRIDE { + bidi_stream_count_++; EchoRequest request; EchoResponse response; while (stream->Read(&request)) { @@ -87,6 +92,7 @@ class ServiceImpl GRPC_FINAL : public ::grpc::cpp::test::util::TestService::Serv Status ResponseStream(ServerContext* context, const EchoRequest* request, ServerWriter<EchoResponse>* writer) GRPC_OVERRIDE { EchoResponse response; + response_stream_count_++; for (int i = 0;; i++) { std::ostringstream msg; msg << "Hello " << i; @@ -96,23 +102,27 @@ class ServiceImpl GRPC_FINAL : public ::grpc::cpp::test::util::TestService::Serv } return Status::OK; } + + int bidi_stream_count() { return bidi_stream_count_; } + + int response_stream_count() { return response_stream_count_; } + + private: + int bidi_stream_count_; + int response_stream_count_; }; class CrashTest : public ::testing::Test { protected: CrashTest() {} - std::unique_ptr<Server> - CreateServerAndClient(const std::string& mode) { + std::unique_ptr<Server> CreateServerAndClient(const std::string& mode) { auto port = grpc_pick_unused_port_or_die(); std::ostringstream addr_stream; addr_stream << "localhost:" << port; auto addr = addr_stream.str(); - client_.reset(new SubProcess({ - g_root + "/server_crash_test_client", - "--address=" + addr, - "--mode=" + mode - })); + client_.reset(new SubProcess({g_root + "/server_crash_test_client", + "--address=" + addr, "--mode=" + mode})); GPR_ASSERT(client_); ServerBuilder builder; @@ -121,9 +131,11 @@ class CrashTest : public ::testing::Test { return builder.BuildAndStart(); } - void KillClient() { - client_.reset(); - } + void KillClient() { client_.reset(); } + + bool HadOneBidiStream() { return service_.bidi_stream_count() == 1; } + + bool HadOneResponseStream() { return service_.response_stream_count() == 1; } private: std::unique_ptr<SubProcess> client_; @@ -136,6 +148,7 @@ TEST_F(CrashTest, ResponseStream) { gpr_sleep_until(gpr_time_add(gpr_now(), gpr_time_from_seconds(5))); KillClient(); server->Shutdown(); + GPR_ASSERT(HadOneResponseStream()); } TEST_F(CrashTest, BidiStream) { @@ -144,6 +157,7 @@ TEST_F(CrashTest, BidiStream) { gpr_sleep_until(gpr_time_add(gpr_now(), gpr_time_from_seconds(5))); KillClient(); server->Shutdown(); + GPR_ASSERT(HadOneBidiStream()); } } // namespace diff --git a/test/cpp/qps/async_streaming_ping_pong_test.cc b/test/cpp/qps/async_streaming_ping_pong_test.cc index d4871c0ba1..411df4d32a 100644 --- a/test/cpp/qps/async_streaming_ping_pong_test.cc +++ b/test/cpp/qps/async_streaming_ping_pong_test.cc @@ -31,12 +31,15 @@ * */ +#include <set> + #include <grpc/support/log.h> #include <signal.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" +#include "test/cpp/util/benchmark_config.h" namespace grpc { namespace testing { @@ -64,16 +67,17 @@ static void RunAsyncStreamingPingPong() { const auto result = RunScenario(client_config, 1, server_config, 1, WARMUP, BENCHMARK, -2); - ReportQPS(*result); - ReportLatency(*result); + GetReporter()->ReportQPS(*result); + GetReporter()->ReportLatency(*result); } } // namespace testing } // namespace grpc int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); + signal(SIGPIPE, SIG_IGN); grpc::testing::RunAsyncStreamingPingPong(); - return 0; } diff --git a/test/cpp/qps/async_unary_ping_pong_test.cc b/test/cpp/qps/async_unary_ping_pong_test.cc index 35f188c986..eda31b5744 100644 --- a/test/cpp/qps/async_unary_ping_pong_test.cc +++ b/test/cpp/qps/async_unary_ping_pong_test.cc @@ -31,12 +31,15 @@ * */ +#include <set> + #include <grpc/support/log.h> #include <signal.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" +#include "test/cpp/util/benchmark_config.h" namespace grpc { namespace testing { @@ -64,16 +67,16 @@ static void RunAsyncUnaryPingPong() { const auto result = RunScenario(client_config, 1, server_config, 1, WARMUP, BENCHMARK, -2); - ReportQPS(*result); - ReportLatency(*result); + GetReporter()->ReportQPS(*result); + GetReporter()->ReportLatency(*result); } - } // namespace testing } // namespace grpc int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); signal(SIGPIPE, SIG_IGN); - grpc::testing::RunAsyncUnaryPingPong(); + grpc::testing::RunAsyncUnaryPingPong(); return 0; } diff --git a/test/cpp/qps/qps_driver.cc b/test/cpp/qps/qps_driver.cc index 008830de4e..281e2e8119 100644 --- a/test/cpp/qps/qps_driver.cc +++ b/test/cpp/qps/qps_driver.cc @@ -31,12 +31,15 @@ * */ +#include <memory> +#include <set> + #include <gflags/gflags.h> #include <grpc/support/log.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" -#include "test/cpp/util/test_config.h" +#include "test/cpp/util/benchmark_config.h" DEFINE_int32(num_clients, 1, "Number of client binaries"); DEFINE_int32(num_servers, 1, "Number of server binaries"); @@ -68,9 +71,10 @@ using grpc::testing::ServerType; using grpc::testing::RpcType; using grpc::testing::ResourceUsage; -int main(int argc, char** argv) { - grpc::testing::InitTest(&argc, &argv, true); +namespace grpc { +namespace testing { +static void QpsDriver() { RpcType rpc_type; GPR_ASSERT(RpcType_Parse(FLAGS_rpc_type, &rpc_type)); @@ -107,9 +111,20 @@ int main(int argc, char** argv) { client_config, FLAGS_num_clients, server_config, FLAGS_num_servers, FLAGS_warmup_seconds, FLAGS_benchmark_seconds, FLAGS_local_workers); - ReportQPSPerCore(*result, server_config); - ReportLatency(*result); - ReportTimes(*result); + GetReporter()->ReportQPS(*result); + GetReporter()->ReportQPSPerCore(*result, server_config); + GetReporter()->ReportLatency(*result); + GetReporter()->ReportTimes(*result); +} + +} // namespace testing +} // namespace grpc + +int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); + + signal(SIGPIPE, SIG_IGN); + grpc::testing::QpsDriver(); return 0; } diff --git a/test/cpp/qps/qps_test.cc b/test/cpp/qps/qps_test.cc index 9a81d0fc90..63a37ae07e 100644 --- a/test/cpp/qps/qps_test.cc +++ b/test/cpp/qps/qps_test.cc @@ -31,12 +31,15 @@ * */ +#include <set> + #include <grpc/support/log.h> #include <signal.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" +#include "test/cpp/util/benchmark_config.h" namespace grpc { namespace testing { @@ -64,14 +67,16 @@ static void RunQPS() { const auto result = RunScenario(client_config, 1, server_config, 1, WARMUP, BENCHMARK, -2); - ReportQPSPerCore(*result, server_config); - ReportLatency(*result); + GetReporter()->ReportQPSPerCore(*result, server_config); + GetReporter()->ReportLatency(*result); } } // namespace testing } // namespace grpc int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); + signal(SIGPIPE, SIG_IGN); grpc::testing::RunQPS(); diff --git a/test/cpp/qps/report.cc b/test/cpp/qps/report.cc index 3115ff3bfb..e116175e3b 100644 --- a/test/cpp/qps/report.cc +++ b/test/cpp/qps/report.cc @@ -39,27 +39,55 @@ namespace grpc { namespace testing { -// QPS: XXX -void ReportQPS(const ScenarioResult& result) { +void CompositeReporter::add(std::unique_ptr<Reporter> reporter) { + reporters_.emplace_back(std::move(reporter)); +} + +void CompositeReporter::ReportQPS(const ScenarioResult& result) const { + for (size_t i = 0; i < reporters_.size(); ++i) { + reporters_[i]->ReportQPS(result); + } +} + +void CompositeReporter::ReportQPSPerCore(const ScenarioResult& result, + const ServerConfig& config) const { + for (size_t i = 0; i < reporters_.size(); ++i) { + reporters_[i]->ReportQPSPerCore(result, config); + } +} + +void CompositeReporter::ReportLatency(const ScenarioResult& result) const { + for (size_t i = 0; i < reporters_.size(); ++i) { + reporters_[i]->ReportLatency(result); + } +} + +void CompositeReporter::ReportTimes(const ScenarioResult& result) const { + for (size_t i = 0; i < reporters_.size(); ++i) { + reporters_[i]->ReportTimes(result); + } +} + + +void GprLogReporter::ReportQPS(const ScenarioResult& result) const { gpr_log(GPR_INFO, "QPS: %.1f", result.latencies.Count() / average(result.client_resources, [](ResourceUsage u) { return u.wall_time; })); } -// QPS: XXX (YYY/server core) -void ReportQPSPerCore(const ScenarioResult& result, - const ServerConfig& server_config) { - auto qps = result.latencies.Count() / - average(result.client_resources, - [](ResourceUsage u) { return u.wall_time; }); +void GprLogReporter::ReportQPSPerCore(const ScenarioResult& result, + const ServerConfig& server_config) const { + auto qps = + result.latencies.Count() / + average(result.client_resources, + [](ResourceUsage u) { return u.wall_time; }); gpr_log(GPR_INFO, "QPS: %.1f (%.1f/server core)", qps, qps / server_config.threads()); } -// Latency (50/90/95/99/99.9%-ile): AA/BB/CC/DD/EE us -void ReportLatency(const ScenarioResult& result) { +void GprLogReporter::ReportLatency(const ScenarioResult& result) const { gpr_log(GPR_INFO, "Latencies (50/90/95/99/99.9%%-ile): %.1f/%.1f/%.1f/%.1f/%.1f us", result.latencies.Percentile(50) / 1000, @@ -69,7 +97,7 @@ void ReportLatency(const ScenarioResult& result) { result.latencies.Percentile(99.9) / 1000); } -void ReportTimes(const ScenarioResult& result) { +void GprLogReporter::ReportTimes(const ScenarioResult& result) const { gpr_log(GPR_INFO, "Server system time: %.2f%%", 100.0 * sum(result.server_resources, [](ResourceUsage u) { return u.system_time; }) / diff --git a/test/cpp/qps/report.h b/test/cpp/qps/report.h index 343e426ca4..630275ecda 100644 --- a/test/cpp/qps/report.h +++ b/test/cpp/qps/report.h @@ -34,22 +34,77 @@ #ifndef TEST_QPS_REPORT_H #define TEST_QPS_REPORT_H +#include <memory> +#include <set> +#include <vector> +#include <grpc++/config.h> + #include "test/cpp/qps/driver.h" +#include "test/cpp/qps/qpstest.grpc.pb.h" namespace grpc { namespace testing { -// QPS: XXX -void ReportQPS(const ScenarioResult& result); -// QPS: XXX (YYY/server core) -void ReportQPSPerCore(const ScenarioResult& result, const ServerConfig& config); -// Latency (50/90/95/99/99.9%-ile): AA/BB/CC/DD/EE us -void ReportLatency(const ScenarioResult& result); -// Server system time: XX% -// Server user time: XX% -// Client system time: XX% -// Client user time: XX% -void ReportTimes(const ScenarioResult& result); +/** Interface for all reporters. */ +class Reporter { + public: + /** Construct a reporter with the given \a name. */ + Reporter(const string& name) : name_(name) {} + + virtual ~Reporter() {} + + /** Returns this reporter's name. + * + * Names are constants, set at construction time. */ + string name() const { return name_; } + + /** Reports QPS for the given \a result. */ + virtual void ReportQPS(const ScenarioResult& result) const = 0; + + /** Reports QPS per core as (YYY/server core). */ + virtual void ReportQPSPerCore(const ScenarioResult& result, + const ServerConfig& config) const = 0; + + /** Reports latencies for the 50, 90, 95, 99 and 99.9 percentiles, in ms. */ + virtual void ReportLatency(const ScenarioResult& result) const = 0; + + /** Reports system and user time for client and server systems. */ + virtual void ReportTimes(const ScenarioResult& result) const = 0; + + private: + const string name_; +}; + +/** A composite for all reporters to be considered. */ +class CompositeReporter : public Reporter { + public: + CompositeReporter() : Reporter("CompositeReporter") {} + + /** Adds a \a reporter to the composite. */ + void add(std::unique_ptr<Reporter> reporter); + + void ReportQPS(const ScenarioResult& result) const GRPC_OVERRIDE; + void ReportQPSPerCore(const ScenarioResult& result, + const ServerConfig& config) const GRPC_OVERRIDE; + void ReportLatency(const ScenarioResult& result) const GRPC_OVERRIDE; + void ReportTimes(const ScenarioResult& result) const GRPC_OVERRIDE; + + private: + std::vector<std::unique_ptr<Reporter> > reporters_; +}; + +/** Reporter to gpr_log(GPR_INFO). */ +class GprLogReporter : public Reporter { + public: + GprLogReporter(const string& name) : Reporter(name) {} + + private: + void ReportQPS(const ScenarioResult& result) const GRPC_OVERRIDE; + void ReportQPSPerCore(const ScenarioResult& result, + const ServerConfig& config) const GRPC_OVERRIDE; + void ReportLatency(const ScenarioResult& result) const GRPC_OVERRIDE; + void ReportTimes(const ScenarioResult& result) const GRPC_OVERRIDE; +}; } // namespace testing } // namespace grpc diff --git a/test/cpp/qps/sync_streaming_ping_pong_test.cc b/test/cpp/qps/sync_streaming_ping_pong_test.cc index 218306846b..d53905a779 100644 --- a/test/cpp/qps/sync_streaming_ping_pong_test.cc +++ b/test/cpp/qps/sync_streaming_ping_pong_test.cc @@ -31,12 +31,15 @@ * */ +#include <set> + #include <grpc/support/log.h> #include <signal.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" +#include "test/cpp/util/benchmark_config.h" namespace grpc { namespace testing { @@ -63,14 +66,15 @@ static void RunSynchronousStreamingPingPong() { const auto result = RunScenario(client_config, 1, server_config, 1, WARMUP, BENCHMARK, -2); - ReportQPS(*result); - ReportLatency(*result); + GetReporter()->ReportQPS(*result); + GetReporter()->ReportLatency(*result); } - } // namespace testing } // namespace grpc int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); + signal(SIGPIPE, SIG_IGN); grpc::testing::RunSynchronousStreamingPingPong(); diff --git a/test/cpp/qps/sync_unary_ping_pong_test.cc b/test/cpp/qps/sync_unary_ping_pong_test.cc index 137ef79f2f..d276d13a43 100644 --- a/test/cpp/qps/sync_unary_ping_pong_test.cc +++ b/test/cpp/qps/sync_unary_ping_pong_test.cc @@ -31,12 +31,15 @@ * */ +#include <set> + #include <grpc/support/log.h> #include <signal.h> #include "test/cpp/qps/driver.h" #include "test/cpp/qps/report.h" +#include "test/cpp/util/benchmark_config.h" namespace grpc { namespace testing { @@ -63,14 +66,16 @@ static void RunSynchronousUnaryPingPong() { const auto result = RunScenario(client_config, 1, server_config, 1, WARMUP, BENCHMARK, -2); - ReportQPS(*result); - ReportLatency(*result); + GetReporter()->ReportQPS(*result); + GetReporter()->ReportLatency(*result); } } // namespace testing } // namespace grpc int main(int argc, char** argv) { + grpc::testing::InitBenchmark(&argc, &argv, true); + signal(SIGPIPE, SIG_IGN); grpc::testing::RunSynchronousUnaryPingPong(); diff --git a/test/cpp/util/benchmark_config.cc b/test/cpp/util/benchmark_config.cc new file mode 100644 index 0000000000..5b3c1daf5d --- /dev/null +++ b/test/cpp/util/benchmark_config.cc @@ -0,0 +1,69 @@ +/* + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <gflags/gflags.h> +#include "test/cpp/util/benchmark_config.h" + +DEFINE_bool(enable_log_reporter, true, + "Enable reporting of benchmark results through GprLog"); + +// In some distros, gflags is in the namespace google, and in some others, +// in gflags. This hack is enabling us to find both. +namespace google {} +namespace gflags {} +using namespace google; +using namespace gflags; + +namespace grpc { +namespace testing { + +void InitBenchmark(int* argc, char*** argv, bool remove_flags) { + ParseCommandLineFlags(argc, argv, remove_flags); +} + +static std::shared_ptr<Reporter> InitBenchmarkReporters() { + auto* composite_reporter = new CompositeReporter; + if (FLAGS_enable_log_reporter) { + composite_reporter->add( + std::unique_ptr<Reporter>(new GprLogReporter("LogReporter"))); + } + return std::shared_ptr<Reporter>(composite_reporter); +} + +std::shared_ptr<Reporter> GetReporter() { + static std::shared_ptr<Reporter> reporter(InitBenchmarkReporters()); + return reporter; +} + +} // namespace testing +} // namespace grpc diff --git a/test/cpp/util/benchmark_config.h b/test/cpp/util/benchmark_config.h new file mode 100644 index 0000000000..6b308a15ff --- /dev/null +++ b/test/cpp/util/benchmark_config.h @@ -0,0 +1,57 @@ +/* + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef GRPC_TEST_CPP_UTIL_BENCHMARK_CONFIG_H +#define GRPC_TEST_CPP_UTIL_BENCHMARK_CONFIG_H + +#include <memory> +#include <vector> + +#include "test/cpp/qps/report.h" + +namespace grpc { +namespace testing { + +void InitBenchmark(int* argc, char*** argv, bool remove_flags); + +/** Returns the benchmark Reporter instance. + * + * The returned instance will take care of generating reports for all the actual + * reporters configured via the "enable_*_reporter" command line flags (see + * benchmark_config.cc). */ +std::shared_ptr<Reporter> GetReporter(); + +} // namespace testing +} // namespace grpc + +#endif // GRPC_TEST_CPP_UTIL_BENCHMARK_CONFIG_H diff --git a/tools/buildgen/bunch.py b/tools/buildgen/bunch.py index 0db8792523..1f17ccb31b 100755 --- a/tools/buildgen/bunch.py +++ b/tools/buildgen/bunch.py @@ -57,6 +57,7 @@ def merge_json(dst, add): if isinstance(dst, dict) and isinstance(add, dict): for k, v in add.items(): if k in dst: + if k == '#': continue merge_json(dst[k], v) else: dst[k] = v diff --git a/tools/buildgen/generate_build_additions.sh b/tools/buildgen/generate_build_additions.sh new file mode 100644 index 0000000000..44fc2558fa --- /dev/null +++ b/tools/buildgen/generate_build_additions.sh @@ -0,0 +1,38 @@ +#!/bin/sh +# Copyright 2015, Google Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following disclaimer +# in the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Google Inc. nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +gen_build_json_dirs="test/core/end2end test/core/bad_client" +gen_build_files="" +for gen_build_json in $gen_build_json_dirs +do + output_file=`mktemp /tmp/genXXXXXX` + $gen_build_json/gen_build_json.py > $output_file + gen_build_files="$gen_build_files $output_file" +done diff --git a/tools/buildgen/generate_projects.sh b/tools/buildgen/generate_projects.sh index cdea1f9319..5399867746 100755 --- a/tools/buildgen/generate_projects.sh +++ b/tools/buildgen/generate_projects.sh @@ -38,14 +38,12 @@ fi cd `dirname $0`/../.. mako_renderer=tools/buildgen/mako_renderer.py -gen_build_json=test/core/end2end/gen_build_json.py if [ "x$TEST" != "x" ] ; then tools/buildgen/build-cleaner.py build.json fi -end2end_test_build=`mktemp /tmp/genXXXXXX` -$gen_build_json > $end2end_test_build +. tools/buildgen/generate_build_additions.sh global_plugins=`find ./tools/buildgen/plugins -name '*.py' | sort | grep -v __init__ | awk ' { printf "-p %s ", $0 } '` @@ -60,7 +58,7 @@ for dir in . ; do out=${dir}/${file#$dir/templates/} # strip templates dir prefix out=${out%.*} # strip template extension echo "generating file: $out" - json_files="build.json $end2end_test_build" + json_files="build.json $gen_build_files" data=`for i in $json_files ; do echo $i ; done | awk ' { printf "-d %s ", $0 } '` if [ "x$TEST" = "xtrue" ] ; then actual_out=$out @@ -75,4 +73,4 @@ for dir in . ; do done done -rm $end2end_test_build +rm $gen_build_files diff --git a/tools/buildgen/plugins/generate_vsprojects.py b/tools/buildgen/plugins/generate_vsprojects.py index 09a5bdbcc8..150e72e0b2 100755 --- a/tools/buildgen/plugins/generate_vsprojects.py +++ b/tools/buildgen/plugins/generate_vsprojects.py @@ -70,7 +70,7 @@ def mako_plugin(dictionary): if project.get('vs_project_guid', None)] projects = [project for project in projects - if project['language'] != 'c++' or project['build'] == 'all'] + if project['language'] != 'c++' or project['build'] == 'all' or project['build'] == 'protoc'] project_dict = dict([(p['name'], p) for p in projects]) diff --git a/tools/dockerfile/grpc_csharp_mono/build.sh b/tools/dockerfile/grpc_csharp_mono/build.sh new file mode 100755 index 0000000000..a7737d752e --- /dev/null +++ b/tools/dockerfile/grpc_csharp_mono/build.sh @@ -0,0 +1,10 @@ +#!/bin/bash + +cp -R /var/local/git-clone/grpc /var/local/git + +make install_grpc_csharp_ext -j12 -C /var/local/git/grpc + +cd /var/local/git/grpc/src/csharp && mono /var/local/NuGet.exe restore Grpc.sln + +cd /var/local/git/grpc/src/csharp && xbuild Grpc.sln + diff --git a/tools/dockerfile/grpc_php/build.sh b/tools/dockerfile/grpc_php/build.sh new file mode 100755 index 0000000000..fbbc61d5fa --- /dev/null +++ b/tools/dockerfile/grpc_php/build.sh @@ -0,0 +1,18 @@ +#!/bin/bash + +cp -R /var/local/git-clone/grpc /var/local/git + +make clean -C /var/local/git/grpc + +make install_c -j12 -C /var/local/git/grpc + +cd /var/local/git/grpc/src/php/ext/grpc && git pull && phpize + +cd /var/local/git/grpc/src/php/ext/grpc \ + && ./configure \ + && make + +cd /var/local/git/grpc/src/php && composer install + +cd /var/local/git/grpc/src/php && protoc-gen-php -i tests/interop/ -o tests/interop/ tests/interop/test.proto + diff --git a/tools/doxygen/Doxyfile.c++ b/tools/doxygen/Doxyfile.c++ new file mode 100644 index 0000000000..e12182bc78 --- /dev/null +++ b/tools/doxygen/Doxyfile.c++ @@ -0,0 +1,2365 @@ + + +# Doxyfile 1.8.9.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "GRPC C++" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = 0.9.0.0 + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/ref/c++ + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 2 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = include/grpc++/async_generic_service.h include/grpc++/async_unary_call.h include/grpc++/byte_buffer.h include/grpc++/channel_arguments.h include/grpc++/channel_interface.h include/grpc++/client_context.h include/grpc++/completion_queue.h include/grpc++/config.h include/grpc++/create_channel.h include/grpc++/credentials.h include/grpc++/generic_stub.h include/grpc++/impl/call.h include/grpc++/impl/client_unary_call.h include/grpc++/impl/grpc_library.h include/grpc++/impl/internal_stub.h include/grpc++/impl/rpc_method.h include/grpc++/impl/rpc_service_method.h include/grpc++/impl/service_type.h include/grpc++/impl/sync.h include/grpc++/impl/sync_cxx11.h include/grpc++/impl/sync_no_cxx11.h include/grpc++/impl/thd.h include/grpc++/impl/thd_cxx11.h include/grpc++/impl/thd_no_cxx11.h include/grpc++/server.h include/grpc++/server_builder.h include/grpc++/server_context.h include/grpc++/server_credentials.h include/grpc++/slice.h include/grpc++/status.h include/grpc++/status_code_enum.h include/grpc++/stream.h include/grpc++/thread_pool_interface.h include/grpc++/time.h + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = GRPC_FINAL= GRPC_OVERIDE= + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES + diff --git a/tools/doxygen/Doxyfile.core b/tools/doxygen/Doxyfile.core new file mode 100644 index 0000000000..529792663e --- /dev/null +++ b/tools/doxygen/Doxyfile.core @@ -0,0 +1,2365 @@ + + +# Doxyfile 1.8.9.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "GRPC Core" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = 0.9.0.0 + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/ref/core + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 2 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = include/grpc/grpc_security.h include/grpc/byte_buffer.h include/grpc/byte_buffer_reader.h include/grpc/grpc.h include/grpc/status.h include/grpc/support/alloc.h include/grpc/support/atm.h include/grpc/support/atm_gcc_atomic.h include/grpc/support/atm_gcc_sync.h include/grpc/support/atm_win32.h include/grpc/support/cancellable_platform.h include/grpc/support/cmdline.h include/grpc/support/cpu.h include/grpc/support/histogram.h include/grpc/support/host_port.h include/grpc/support/log.h include/grpc/support/log_win32.h include/grpc/support/port_platform.h include/grpc/support/slice.h include/grpc/support/slice_buffer.h include/grpc/support/subprocess.h include/grpc/support/sync.h include/grpc/support/sync_generic.h include/grpc/support/sync_posix.h include/grpc/support/sync_win32.h include/grpc/support/thd.h include/grpc/support/time.h include/grpc/support/tls.h include/grpc/support/tls_gcc.h include/grpc/support/tls_msvc.h include/grpc/support/tls_pthread.h include/grpc/support/useful.h + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = GRPC_FINAL= GRPC_OVERIDE= + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES + diff --git a/tools/doxygen/run_doxygen.sh b/tools/doxygen/run_doxygen.sh new file mode 100755 index 0000000000..323cf3bbf4 --- /dev/null +++ b/tools/doxygen/run_doxygen.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +# Copyright 2015, Google Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following disclaimer +# in the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Google Inc. nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +set -ex + +# change to grpc repo root +cd $(dirname $0)/../.. + +for i in core c++ +do + mkdir -p doc/ref/$i + doxygen tools/doxygen/Doxyfile.$i +done diff --git a/tools/run_tests/run_tests.py b/tools/run_tests/run_tests.py index 3a344693c1..2428e21ca3 100755 --- a/tools/run_tests/run_tests.py +++ b/tools/run_tests/run_tests.py @@ -57,7 +57,6 @@ class SimpleConfig(object): if environ is None: environ = {} self.build_config = config - self.maxjobs = 2 * multiprocessing.cpu_count() self.allow_hashing = (config != 'gcov') self.environ = environ self.environ['CONFIG'] = config @@ -93,7 +92,6 @@ class ValgrindConfig(object): self.build_config = config self.tool = tool self.args = args - self.maxjobs = 2 * multiprocessing.cpu_count() self.allow_hashing = False def job_spec(self, cmdline, hash_targets): @@ -333,7 +331,7 @@ argp.add_argument('-c', '--config', default=_DEFAULT) argp.add_argument('-n', '--runs_per_test', default=1, type=int) argp.add_argument('-r', '--regex', default='.*', type=str) -argp.add_argument('-j', '--jobs', default=1000, type=int) +argp.add_argument('-j', '--jobs', default=2 * multiprocessing.cpu_count(), type=int) argp.add_argument('-s', '--slowdown', default=1.0, type=float) argp.add_argument('-f', '--forever', default=False, @@ -455,7 +453,7 @@ def _build_and_run(check_cancelled, newline_on_success, travis, cache): itertools.repeat(one_run, runs_per_test)) if not jobset.run(all_runs, check_cancelled, newline_on_success=newline_on_success, travis=travis, - maxjobs=min(args.jobs, min(c.maxjobs for c in run_configs)), + maxjobs=args.jobs, cache=cache): return 2 finally: diff --git a/tools/run_tests/tests.json b/tools/run_tests/tests.json index 5dae3e8eb5..c34f0f2036 100644 --- a/tools/run_tests/tests.json +++ b/tools/run_tests/tests.json @@ -65,7 +65,7 @@ ] }, { - "flaky": true, + "flaky": false, "language": "c", "name": "census_statistics_multiple_writers_test", "platforms": [ @@ -74,7 +74,7 @@ ] }, { - "flaky": true, + "flaky": false, "language": "c", "name": "census_statistics_performance_test", "platforms": [ @@ -83,7 +83,7 @@ ] }, { - "flaky": true, + "flaky": false, "language": "c", "name": "census_statistics_quick_test", "platforms": [ @@ -92,7 +92,7 @@ ] }, { - "flaky": true, + "flaky": false, "language": "c", "name": "census_statistics_small_log_test", "platforms": [ @@ -4039,6 +4039,15 @@ "windows", "posix" ] + }, + { + "flaky": false, + "language": "c", + "name": "connection_prefix_bad_client_test", + "platforms": [ + "windows", + "posix" + ] } ] diff --git a/vsprojects/.gitignore b/vsprojects/.gitignore index dc63b1b31b..d69021ef58 100644 --- a/vsprojects/.gitignore +++ b/vsprojects/.gitignore @@ -3,7 +3,7 @@ Release *.suo *.user test_bin -grpc.opensdf -grpc.sdf +*.opensdf +*.sdf third_party/*.user /packages diff --git a/vsprojects/Grpc.mak b/vsprojects/Grpc.mak index 119a00f319..0aa3d06eb9 100644 --- a/vsprojects/Grpc.mak +++ b/vsprojects/Grpc.mak @@ -54,10 +54,10 @@ all: buildtests $(OUT_DIR): mkdir $(OUT_DIR) -build_libs: build_gpr build_gpr_test_util build_grpc build_grpc_test_util build_grpc_test_util_unsecure build_grpc_unsecure Debug\end2end_fixture_chttp2_fake_security.lib Debug\end2end_fixture_chttp2_fullstack.lib Debug\end2end_fixture_chttp2_simple_ssl_fullstack.lib Debug\end2end_fixture_chttp2_simple_ssl_with_oauth2_fullstack.lib Debug\end2end_fixture_chttp2_socket_pair.lib Debug\end2end_fixture_chttp2_socket_pair_one_byte_at_a_time.lib Debug\end2end_fixture_chttp2_socket_pair_with_grpc_trace.lib Debug\end2end_test_bad_hostname.lib Debug\end2end_test_cancel_after_accept.lib Debug\end2end_test_cancel_after_accept_and_writes_closed.lib Debug\end2end_test_cancel_after_invoke.lib Debug\end2end_test_cancel_before_invoke.lib Debug\end2end_test_cancel_in_a_vacuum.lib Debug\end2end_test_census_simple_request.lib Debug\end2end_test_disappearing_server.lib Debug\end2end_test_early_server_shutdown_finishes_inflight_calls.lib Debug\end2end_test_early_server_shutdown_finishes_tags.lib Debug\end2end_test_empty_batch.lib Debug\end2end_test_graceful_server_shutdown.lib Debug\end2end_test_invoke_large_request.lib Debug\end2end_test_max_concurrent_streams.lib Debug\end2end_test_max_message_length.lib Debug\end2end_test_no_op.lib Debug\end2end_test_ping_pong_streaming.lib Debug\end2end_test_registered_call.lib Debug\end2end_test_request_response_with_binary_metadata_and_payload.lib Debug\end2end_test_request_response_with_metadata_and_payload.lib Debug\end2end_test_request_response_with_payload.lib Debug\end2end_test_request_response_with_payload_and_call_creds.lib Debug\end2end_test_request_response_with_trailing_metadata_and_payload.lib Debug\end2end_test_request_with_large_metadata.lib Debug\end2end_test_request_with_payload.lib Debug\end2end_test_server_finishes_request.lib Debug\end2end_test_simple_delayed_request.lib Debug\end2end_test_simple_request.lib Debug\end2end_test_simple_request_with_high_initial_sequence_number.lib Debug\end2end_certs.lib +build_libs: build_gpr build_gpr_test_util build_grpc build_grpc_test_util build_grpc_test_util_unsecure build_grpc_unsecure Debug\end2end_fixture_chttp2_fake_security.lib Debug\end2end_fixture_chttp2_fullstack.lib Debug\end2end_fixture_chttp2_simple_ssl_fullstack.lib Debug\end2end_fixture_chttp2_simple_ssl_with_oauth2_fullstack.lib Debug\end2end_fixture_chttp2_socket_pair.lib Debug\end2end_fixture_chttp2_socket_pair_one_byte_at_a_time.lib Debug\end2end_fixture_chttp2_socket_pair_with_grpc_trace.lib Debug\end2end_test_bad_hostname.lib Debug\end2end_test_cancel_after_accept.lib Debug\end2end_test_cancel_after_accept_and_writes_closed.lib Debug\end2end_test_cancel_after_invoke.lib Debug\end2end_test_cancel_before_invoke.lib Debug\end2end_test_cancel_in_a_vacuum.lib Debug\end2end_test_census_simple_request.lib Debug\end2end_test_disappearing_server.lib Debug\end2end_test_early_server_shutdown_finishes_inflight_calls.lib Debug\end2end_test_early_server_shutdown_finishes_tags.lib Debug\end2end_test_empty_batch.lib Debug\end2end_test_graceful_server_shutdown.lib Debug\end2end_test_invoke_large_request.lib Debug\end2end_test_max_concurrent_streams.lib Debug\end2end_test_max_message_length.lib Debug\end2end_test_no_op.lib Debug\end2end_test_ping_pong_streaming.lib Debug\end2end_test_registered_call.lib Debug\end2end_test_request_response_with_binary_metadata_and_payload.lib Debug\end2end_test_request_response_with_metadata_and_payload.lib Debug\end2end_test_request_response_with_payload.lib Debug\end2end_test_request_response_with_payload_and_call_creds.lib Debug\end2end_test_request_response_with_trailing_metadata_and_payload.lib Debug\end2end_test_request_with_large_metadata.lib Debug\end2end_test_request_with_payload.lib Debug\end2end_test_server_finishes_request.lib Debug\end2end_test_simple_delayed_request.lib Debug\end2end_test_simple_request.lib Debug\end2end_test_simple_request_with_high_initial_sequence_number.lib Debug\end2end_certs.lib Debug\bad_client_test.lib buildtests: buildtests_c buildtests_cxx -buildtests_c: alarm_heap_test.exe alarm_list_test.exe alarm_test.exe alpn_test.exe bin_encoder_test.exe census_hash_table_test.exe census_statistics_multiple_writers_circular_buffer_test.exe census_statistics_multiple_writers_test.exe census_statistics_performance_test.exe census_statistics_quick_test.exe census_statistics_small_log_test.exe census_stub_test.exe census_window_stats_test.exe chttp2_status_conversion_test.exe chttp2_stream_encoder_test.exe chttp2_stream_map_test.exe fling_client.exe fling_server.exe gpr_cancellable_test.exe gpr_cmdline_test.exe gpr_env_test.exe gpr_file_test.exe gpr_histogram_test.exe gpr_host_port_test.exe gpr_log_test.exe gpr_slice_buffer_test.exe gpr_slice_test.exe gpr_string_test.exe gpr_sync_test.exe gpr_thd_test.exe gpr_time_test.exe gpr_tls_test.exe gpr_useful_test.exe grpc_base64_test.exe grpc_byte_buffer_reader_test.exe grpc_channel_stack_test.exe grpc_completion_queue_test.exe grpc_credentials_test.exe grpc_json_token_test.exe grpc_stream_op_test.exe hpack_parser_test.exe hpack_table_test.exe httpcli_format_request_test.exe httpcli_parser_test.exe httpcli_test.exe json_rewrite.exe json_rewrite_test.exe json_test.exe lame_client_test.exe message_compress_test.exe multi_init_test.exe murmur_hash_test.exe no_server_test.exe resolve_address_test.exe secure_endpoint_test.exe sockaddr_utils_test.exe time_averaged_stats_test.exe time_test.exe timeout_encoding_test.exe timers_test.exe transport_metadata_test.exe transport_security_test.exe chttp2_fake_security_bad_hostname_test.exe chttp2_fake_security_cancel_after_accept_test.exe chttp2_fake_security_cancel_after_accept_and_writes_closed_test.exe chttp2_fake_security_cancel_after_invoke_test.exe chttp2_fake_security_cancel_before_invoke_test.exe chttp2_fake_security_cancel_in_a_vacuum_test.exe chttp2_fake_security_census_simple_request_test.exe chttp2_fake_security_disappearing_server_test.exe chttp2_fake_security_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_fake_security_early_server_shutdown_finishes_tags_test.exe chttp2_fake_security_empty_batch_test.exe chttp2_fake_security_graceful_server_shutdown_test.exe chttp2_fake_security_invoke_large_request_test.exe chttp2_fake_security_max_concurrent_streams_test.exe chttp2_fake_security_max_message_length_test.exe chttp2_fake_security_no_op_test.exe chttp2_fake_security_ping_pong_streaming_test.exe chttp2_fake_security_registered_call_test.exe chttp2_fake_security_request_response_with_binary_metadata_and_payload_test.exe chttp2_fake_security_request_response_with_metadata_and_payload_test.exe chttp2_fake_security_request_response_with_payload_test.exe chttp2_fake_security_request_response_with_payload_and_call_creds_test.exe chttp2_fake_security_request_response_with_trailing_metadata_and_payload_test.exe chttp2_fake_security_request_with_large_metadata_test.exe chttp2_fake_security_request_with_payload_test.exe chttp2_fake_security_server_finishes_request_test.exe chttp2_fake_security_simple_delayed_request_test.exe chttp2_fake_security_simple_request_test.exe chttp2_fake_security_simple_request_with_high_initial_sequence_number_test.exe chttp2_fullstack_bad_hostname_test.exe chttp2_fullstack_cancel_after_accept_test.exe chttp2_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_fullstack_cancel_after_invoke_test.exe chttp2_fullstack_cancel_before_invoke_test.exe chttp2_fullstack_cancel_in_a_vacuum_test.exe chttp2_fullstack_census_simple_request_test.exe chttp2_fullstack_disappearing_server_test.exe chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_fullstack_empty_batch_test.exe chttp2_fullstack_graceful_server_shutdown_test.exe chttp2_fullstack_invoke_large_request_test.exe chttp2_fullstack_max_concurrent_streams_test.exe chttp2_fullstack_max_message_length_test.exe chttp2_fullstack_no_op_test.exe chttp2_fullstack_ping_pong_streaming_test.exe chttp2_fullstack_registered_call_test.exe chttp2_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_fullstack_request_response_with_payload_test.exe chttp2_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_fullstack_request_with_large_metadata_test.exe chttp2_fullstack_request_with_payload_test.exe chttp2_fullstack_server_finishes_request_test.exe chttp2_fullstack_simple_delayed_request_test.exe chttp2_fullstack_simple_request_test.exe chttp2_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_simple_ssl_fullstack_bad_hostname_test.exe chttp2_simple_ssl_fullstack_cancel_after_accept_test.exe chttp2_simple_ssl_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_simple_ssl_fullstack_cancel_after_invoke_test.exe chttp2_simple_ssl_fullstack_cancel_before_invoke_test.exe chttp2_simple_ssl_fullstack_cancel_in_a_vacuum_test.exe chttp2_simple_ssl_fullstack_census_simple_request_test.exe chttp2_simple_ssl_fullstack_disappearing_server_test.exe chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_simple_ssl_fullstack_empty_batch_test.exe chttp2_simple_ssl_fullstack_graceful_server_shutdown_test.exe chttp2_simple_ssl_fullstack_invoke_large_request_test.exe chttp2_simple_ssl_fullstack_max_concurrent_streams_test.exe chttp2_simple_ssl_fullstack_max_message_length_test.exe chttp2_simple_ssl_fullstack_no_op_test.exe chttp2_simple_ssl_fullstack_ping_pong_streaming_test.exe chttp2_simple_ssl_fullstack_registered_call_test.exe chttp2_simple_ssl_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_simple_ssl_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_with_large_metadata_test.exe chttp2_simple_ssl_fullstack_request_with_payload_test.exe chttp2_simple_ssl_fullstack_server_finishes_request_test.exe chttp2_simple_ssl_fullstack_simple_delayed_request_test.exe chttp2_simple_ssl_fullstack_simple_request_test.exe chttp2_simple_ssl_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_simple_ssl_with_oauth2_fullstack_bad_hostname_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_invoke_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_before_invoke_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_in_a_vacuum_test.exe chttp2_simple_ssl_with_oauth2_fullstack_census_simple_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_disappearing_server_test.exe chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_simple_ssl_with_oauth2_fullstack_empty_batch_test.exe chttp2_simple_ssl_with_oauth2_fullstack_graceful_server_shutdown_test.exe chttp2_simple_ssl_with_oauth2_fullstack_invoke_large_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_max_concurrent_streams_test.exe chttp2_simple_ssl_with_oauth2_fullstack_max_message_length_test.exe chttp2_simple_ssl_with_oauth2_fullstack_no_op_test.exe chttp2_simple_ssl_with_oauth2_fullstack_ping_pong_streaming_test.exe chttp2_simple_ssl_with_oauth2_fullstack_registered_call_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_with_large_metadata_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_with_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_server_finishes_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_delayed_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_bad_hostname_test.exe chttp2_socket_pair_cancel_after_accept_test.exe chttp2_socket_pair_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_cancel_after_invoke_test.exe chttp2_socket_pair_cancel_before_invoke_test.exe chttp2_socket_pair_cancel_in_a_vacuum_test.exe chttp2_socket_pair_census_simple_request_test.exe chttp2_socket_pair_disappearing_server_test.exe chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_empty_batch_test.exe chttp2_socket_pair_graceful_server_shutdown_test.exe chttp2_socket_pair_invoke_large_request_test.exe chttp2_socket_pair_max_concurrent_streams_test.exe chttp2_socket_pair_max_message_length_test.exe chttp2_socket_pair_no_op_test.exe chttp2_socket_pair_ping_pong_streaming_test.exe chttp2_socket_pair_registered_call_test.exe chttp2_socket_pair_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_request_response_with_payload_test.exe chttp2_socket_pair_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_request_with_large_metadata_test.exe chttp2_socket_pair_request_with_payload_test.exe chttp2_socket_pair_server_finishes_request_test.exe chttp2_socket_pair_simple_delayed_request_test.exe chttp2_socket_pair_simple_request_test.exe chttp2_socket_pair_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_one_byte_at_a_time_bad_hostname_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_test.exe chttp2_socket_pair_one_byte_at_a_time_census_simple_request_test.exe chttp2_socket_pair_one_byte_at_a_time_disappearing_server_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_one_byte_at_a_time_empty_batch_test.exe chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_test.exe chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_test.exe chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_test.exe chttp2_socket_pair_one_byte_at_a_time_max_message_length_test.exe chttp2_socket_pair_one_byte_at_a_time_no_op_test.exe chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_test.exe chttp2_socket_pair_one_byte_at_a_time_registered_call_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_with_grpc_trace_bad_hostname_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_test.exe chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_test.exe chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_test.exe chttp2_socket_pair_with_grpc_trace_census_simple_request_test.exe chttp2_socket_pair_with_grpc_trace_disappearing_server_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_with_grpc_trace_empty_batch_test.exe chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_test.exe chttp2_socket_pair_with_grpc_trace_invoke_large_request_test.exe chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_test.exe chttp2_socket_pair_with_grpc_trace_max_message_length_test.exe chttp2_socket_pair_with_grpc_trace_no_op_test.exe chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_test.exe chttp2_socket_pair_with_grpc_trace_registered_call_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_test.exe chttp2_socket_pair_with_grpc_trace_request_with_payload_test.exe chttp2_socket_pair_with_grpc_trace_server_finishes_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_delayed_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_test.exe chttp2_fullstack_bad_hostname_unsecure_test.exe chttp2_fullstack_cancel_after_accept_unsecure_test.exe chttp2_fullstack_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_fullstack_cancel_after_invoke_unsecure_test.exe chttp2_fullstack_cancel_before_invoke_unsecure_test.exe chttp2_fullstack_cancel_in_a_vacuum_unsecure_test.exe chttp2_fullstack_census_simple_request_unsecure_test.exe chttp2_fullstack_disappearing_server_unsecure_test.exe chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_fullstack_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_fullstack_empty_batch_unsecure_test.exe chttp2_fullstack_graceful_server_shutdown_unsecure_test.exe chttp2_fullstack_invoke_large_request_unsecure_test.exe chttp2_fullstack_max_concurrent_streams_unsecure_test.exe chttp2_fullstack_max_message_length_unsecure_test.exe chttp2_fullstack_no_op_unsecure_test.exe chttp2_fullstack_ping_pong_streaming_unsecure_test.exe chttp2_fullstack_registered_call_unsecure_test.exe chttp2_fullstack_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_response_with_payload_unsecure_test.exe chttp2_fullstack_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_with_large_metadata_unsecure_test.exe chttp2_fullstack_request_with_payload_unsecure_test.exe chttp2_fullstack_server_finishes_request_unsecure_test.exe chttp2_fullstack_simple_delayed_request_unsecure_test.exe chttp2_fullstack_simple_request_unsecure_test.exe chttp2_fullstack_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_bad_hostname_unsecure_test.exe chttp2_socket_pair_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_census_simple_request_unsecure_test.exe chttp2_socket_pair_disappearing_server_unsecure_test.exe chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_empty_batch_unsecure_test.exe chttp2_socket_pair_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_invoke_large_request_unsecure_test.exe chttp2_socket_pair_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_max_message_length_unsecure_test.exe chttp2_socket_pair_no_op_unsecure_test.exe chttp2_socket_pair_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_registered_call_unsecure_test.exe chttp2_socket_pair_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_request_with_payload_unsecure_test.exe chttp2_socket_pair_server_finishes_request_unsecure_test.exe chttp2_socket_pair_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_simple_request_unsecure_test.exe chttp2_socket_pair_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_bad_hostname_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_census_simple_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_disappearing_server_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_empty_batch_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_max_message_length_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_no_op_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_registered_call_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_bad_hostname_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_census_simple_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_disappearing_server_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_empty_batch_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_invoke_large_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_max_message_length_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_no_op_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_registered_call_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_with_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_server_finishes_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test.exe +buildtests_c: alarm_heap_test.exe alarm_list_test.exe alarm_test.exe alpn_test.exe bin_encoder_test.exe census_hash_table_test.exe census_statistics_multiple_writers_circular_buffer_test.exe census_statistics_multiple_writers_test.exe census_statistics_performance_test.exe census_statistics_quick_test.exe census_statistics_small_log_test.exe census_stub_test.exe census_window_stats_test.exe chttp2_status_conversion_test.exe chttp2_stream_encoder_test.exe chttp2_stream_map_test.exe fling_client.exe fling_server.exe gpr_cancellable_test.exe gpr_cmdline_test.exe gpr_env_test.exe gpr_file_test.exe gpr_histogram_test.exe gpr_host_port_test.exe gpr_log_test.exe gpr_slice_buffer_test.exe gpr_slice_test.exe gpr_string_test.exe gpr_sync_test.exe gpr_thd_test.exe gpr_time_test.exe gpr_tls_test.exe gpr_useful_test.exe grpc_base64_test.exe grpc_byte_buffer_reader_test.exe grpc_channel_stack_test.exe grpc_completion_queue_test.exe grpc_credentials_test.exe grpc_json_token_test.exe grpc_stream_op_test.exe hpack_parser_test.exe hpack_table_test.exe httpcli_format_request_test.exe httpcli_parser_test.exe httpcli_test.exe json_rewrite.exe json_rewrite_test.exe json_test.exe lame_client_test.exe message_compress_test.exe multi_init_test.exe murmur_hash_test.exe no_server_test.exe resolve_address_test.exe secure_endpoint_test.exe sockaddr_utils_test.exe time_averaged_stats_test.exe time_test.exe timeout_encoding_test.exe timers_test.exe transport_metadata_test.exe transport_security_test.exe chttp2_fake_security_bad_hostname_test.exe chttp2_fake_security_cancel_after_accept_test.exe chttp2_fake_security_cancel_after_accept_and_writes_closed_test.exe chttp2_fake_security_cancel_after_invoke_test.exe chttp2_fake_security_cancel_before_invoke_test.exe chttp2_fake_security_cancel_in_a_vacuum_test.exe chttp2_fake_security_census_simple_request_test.exe chttp2_fake_security_disappearing_server_test.exe chttp2_fake_security_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_fake_security_early_server_shutdown_finishes_tags_test.exe chttp2_fake_security_empty_batch_test.exe chttp2_fake_security_graceful_server_shutdown_test.exe chttp2_fake_security_invoke_large_request_test.exe chttp2_fake_security_max_concurrent_streams_test.exe chttp2_fake_security_max_message_length_test.exe chttp2_fake_security_no_op_test.exe chttp2_fake_security_ping_pong_streaming_test.exe chttp2_fake_security_registered_call_test.exe chttp2_fake_security_request_response_with_binary_metadata_and_payload_test.exe chttp2_fake_security_request_response_with_metadata_and_payload_test.exe chttp2_fake_security_request_response_with_payload_test.exe chttp2_fake_security_request_response_with_payload_and_call_creds_test.exe chttp2_fake_security_request_response_with_trailing_metadata_and_payload_test.exe chttp2_fake_security_request_with_large_metadata_test.exe chttp2_fake_security_request_with_payload_test.exe chttp2_fake_security_server_finishes_request_test.exe chttp2_fake_security_simple_delayed_request_test.exe chttp2_fake_security_simple_request_test.exe chttp2_fake_security_simple_request_with_high_initial_sequence_number_test.exe chttp2_fullstack_bad_hostname_test.exe chttp2_fullstack_cancel_after_accept_test.exe chttp2_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_fullstack_cancel_after_invoke_test.exe chttp2_fullstack_cancel_before_invoke_test.exe chttp2_fullstack_cancel_in_a_vacuum_test.exe chttp2_fullstack_census_simple_request_test.exe chttp2_fullstack_disappearing_server_test.exe chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_fullstack_empty_batch_test.exe chttp2_fullstack_graceful_server_shutdown_test.exe chttp2_fullstack_invoke_large_request_test.exe chttp2_fullstack_max_concurrent_streams_test.exe chttp2_fullstack_max_message_length_test.exe chttp2_fullstack_no_op_test.exe chttp2_fullstack_ping_pong_streaming_test.exe chttp2_fullstack_registered_call_test.exe chttp2_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_fullstack_request_response_with_payload_test.exe chttp2_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_fullstack_request_with_large_metadata_test.exe chttp2_fullstack_request_with_payload_test.exe chttp2_fullstack_server_finishes_request_test.exe chttp2_fullstack_simple_delayed_request_test.exe chttp2_fullstack_simple_request_test.exe chttp2_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_simple_ssl_fullstack_bad_hostname_test.exe chttp2_simple_ssl_fullstack_cancel_after_accept_test.exe chttp2_simple_ssl_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_simple_ssl_fullstack_cancel_after_invoke_test.exe chttp2_simple_ssl_fullstack_cancel_before_invoke_test.exe chttp2_simple_ssl_fullstack_cancel_in_a_vacuum_test.exe chttp2_simple_ssl_fullstack_census_simple_request_test.exe chttp2_simple_ssl_fullstack_disappearing_server_test.exe chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_simple_ssl_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_simple_ssl_fullstack_empty_batch_test.exe chttp2_simple_ssl_fullstack_graceful_server_shutdown_test.exe chttp2_simple_ssl_fullstack_invoke_large_request_test.exe chttp2_simple_ssl_fullstack_max_concurrent_streams_test.exe chttp2_simple_ssl_fullstack_max_message_length_test.exe chttp2_simple_ssl_fullstack_no_op_test.exe chttp2_simple_ssl_fullstack_ping_pong_streaming_test.exe chttp2_simple_ssl_fullstack_registered_call_test.exe chttp2_simple_ssl_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_payload_test.exe chttp2_simple_ssl_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_simple_ssl_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_simple_ssl_fullstack_request_with_large_metadata_test.exe chttp2_simple_ssl_fullstack_request_with_payload_test.exe chttp2_simple_ssl_fullstack_server_finishes_request_test.exe chttp2_simple_ssl_fullstack_simple_delayed_request_test.exe chttp2_simple_ssl_fullstack_simple_request_test.exe chttp2_simple_ssl_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_simple_ssl_with_oauth2_fullstack_bad_hostname_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_accept_and_writes_closed_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_after_invoke_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_before_invoke_test.exe chttp2_simple_ssl_with_oauth2_fullstack_cancel_in_a_vacuum_test.exe chttp2_simple_ssl_with_oauth2_fullstack_census_simple_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_disappearing_server_test.exe chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_simple_ssl_with_oauth2_fullstack_early_server_shutdown_finishes_tags_test.exe chttp2_simple_ssl_with_oauth2_fullstack_empty_batch_test.exe chttp2_simple_ssl_with_oauth2_fullstack_graceful_server_shutdown_test.exe chttp2_simple_ssl_with_oauth2_fullstack_invoke_large_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_max_concurrent_streams_test.exe chttp2_simple_ssl_with_oauth2_fullstack_max_message_length_test.exe chttp2_simple_ssl_with_oauth2_fullstack_no_op_test.exe chttp2_simple_ssl_with_oauth2_fullstack_ping_pong_streaming_test.exe chttp2_simple_ssl_with_oauth2_fullstack_registered_call_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_binary_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_payload_and_call_creds_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_response_with_trailing_metadata_and_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_with_large_metadata_test.exe chttp2_simple_ssl_with_oauth2_fullstack_request_with_payload_test.exe chttp2_simple_ssl_with_oauth2_fullstack_server_finishes_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_delayed_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_request_test.exe chttp2_simple_ssl_with_oauth2_fullstack_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_bad_hostname_test.exe chttp2_socket_pair_cancel_after_accept_test.exe chttp2_socket_pair_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_cancel_after_invoke_test.exe chttp2_socket_pair_cancel_before_invoke_test.exe chttp2_socket_pair_cancel_in_a_vacuum_test.exe chttp2_socket_pair_census_simple_request_test.exe chttp2_socket_pair_disappearing_server_test.exe chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_empty_batch_test.exe chttp2_socket_pair_graceful_server_shutdown_test.exe chttp2_socket_pair_invoke_large_request_test.exe chttp2_socket_pair_max_concurrent_streams_test.exe chttp2_socket_pair_max_message_length_test.exe chttp2_socket_pair_no_op_test.exe chttp2_socket_pair_ping_pong_streaming_test.exe chttp2_socket_pair_registered_call_test.exe chttp2_socket_pair_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_request_response_with_payload_test.exe chttp2_socket_pair_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_request_with_large_metadata_test.exe chttp2_socket_pair_request_with_payload_test.exe chttp2_socket_pair_server_finishes_request_test.exe chttp2_socket_pair_simple_delayed_request_test.exe chttp2_socket_pair_simple_request_test.exe chttp2_socket_pair_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_one_byte_at_a_time_bad_hostname_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_test.exe chttp2_socket_pair_one_byte_at_a_time_census_simple_request_test.exe chttp2_socket_pair_one_byte_at_a_time_disappearing_server_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_one_byte_at_a_time_empty_batch_test.exe chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_test.exe chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_test.exe chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_test.exe chttp2_socket_pair_one_byte_at_a_time_max_message_length_test.exe chttp2_socket_pair_one_byte_at_a_time_no_op_test.exe chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_test.exe chttp2_socket_pair_one_byte_at_a_time_registered_call_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_payload_test.exe chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_test.exe chttp2_socket_pair_with_grpc_trace_bad_hostname_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_test.exe chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_test.exe chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_test.exe chttp2_socket_pair_with_grpc_trace_census_simple_request_test.exe chttp2_socket_pair_with_grpc_trace_disappearing_server_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_test.exe chttp2_socket_pair_with_grpc_trace_empty_batch_test.exe chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_test.exe chttp2_socket_pair_with_grpc_trace_invoke_large_request_test.exe chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_test.exe chttp2_socket_pair_with_grpc_trace_max_message_length_test.exe chttp2_socket_pair_with_grpc_trace_no_op_test.exe chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_test.exe chttp2_socket_pair_with_grpc_trace_registered_call_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_and_call_creds_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_test.exe chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_test.exe chttp2_socket_pair_with_grpc_trace_request_with_payload_test.exe chttp2_socket_pair_with_grpc_trace_server_finishes_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_delayed_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_test.exe chttp2_fullstack_bad_hostname_unsecure_test.exe chttp2_fullstack_cancel_after_accept_unsecure_test.exe chttp2_fullstack_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_fullstack_cancel_after_invoke_unsecure_test.exe chttp2_fullstack_cancel_before_invoke_unsecure_test.exe chttp2_fullstack_cancel_in_a_vacuum_unsecure_test.exe chttp2_fullstack_census_simple_request_unsecure_test.exe chttp2_fullstack_disappearing_server_unsecure_test.exe chttp2_fullstack_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_fullstack_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_fullstack_empty_batch_unsecure_test.exe chttp2_fullstack_graceful_server_shutdown_unsecure_test.exe chttp2_fullstack_invoke_large_request_unsecure_test.exe chttp2_fullstack_max_concurrent_streams_unsecure_test.exe chttp2_fullstack_max_message_length_unsecure_test.exe chttp2_fullstack_no_op_unsecure_test.exe chttp2_fullstack_ping_pong_streaming_unsecure_test.exe chttp2_fullstack_registered_call_unsecure_test.exe chttp2_fullstack_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_response_with_payload_unsecure_test.exe chttp2_fullstack_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_fullstack_request_with_large_metadata_unsecure_test.exe chttp2_fullstack_request_with_payload_unsecure_test.exe chttp2_fullstack_server_finishes_request_unsecure_test.exe chttp2_fullstack_simple_delayed_request_unsecure_test.exe chttp2_fullstack_simple_request_unsecure_test.exe chttp2_fullstack_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_bad_hostname_unsecure_test.exe chttp2_socket_pair_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_census_simple_request_unsecure_test.exe chttp2_socket_pair_disappearing_server_unsecure_test.exe chttp2_socket_pair_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_empty_batch_unsecure_test.exe chttp2_socket_pair_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_invoke_large_request_unsecure_test.exe chttp2_socket_pair_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_max_message_length_unsecure_test.exe chttp2_socket_pair_no_op_unsecure_test.exe chttp2_socket_pair_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_registered_call_unsecure_test.exe chttp2_socket_pair_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_request_with_payload_unsecure_test.exe chttp2_socket_pair_server_finishes_request_unsecure_test.exe chttp2_socket_pair_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_simple_request_unsecure_test.exe chttp2_socket_pair_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_bad_hostname_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_census_simple_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_disappearing_server_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_empty_batch_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_invoke_large_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_max_message_length_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_no_op_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_registered_call_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_request_with_payload_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_server_finishes_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_unsecure_test.exe chttp2_socket_pair_one_byte_at_a_time_simple_request_with_high_initial_sequence_number_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_bad_hostname_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_accept_and_writes_closed_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_after_invoke_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_before_invoke_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_cancel_in_a_vacuum_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_census_simple_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_disappearing_server_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_inflight_calls_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_early_server_shutdown_finishes_tags_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_empty_batch_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_graceful_server_shutdown_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_invoke_large_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_max_concurrent_streams_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_max_message_length_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_no_op_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_ping_pong_streaming_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_registered_call_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_binary_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_response_with_trailing_metadata_and_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_with_large_metadata_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_request_with_payload_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_server_finishes_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_delayed_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_unsecure_test.exe chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test.exe connection_prefix_bad_client_test.exe echo All tests built. buildtests_cxx: interop_client.exe interop_server.exe @@ -2751,6 +2751,13 @@ chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_num chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test: chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test.exe echo Running chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test $(OUT_DIR)\chttp2_socket_pair_with_grpc_trace_simple_request_with_high_initial_sequence_number_unsecure_test.exe +connection_prefix_bad_client_test.exe: build_libs $(OUT_DIR) + echo Building connection_prefix_bad_client_test + $(CC) $(CFLAGS) /Fo:$(OUT_DIR)\ $(REPO_ROOT)\test\core\bad_client\tests\connection_prefix.c + $(LINK) $(LFLAGS) /OUT:"$(OUT_DIR)\connection_prefix_bad_client_test.exe" Debug\bad_client_test.lib Debug\grpc_test_util_unsecure.lib Debug\grpc_unsecure.lib Debug\gpr_test_util.lib Debug\gpr.lib $(LIBS) $(OUT_DIR)\connection_prefix.obj +connection_prefix_bad_client_test: connection_prefix_bad_client_test.exe + echo Running connection_prefix_bad_client_test + $(OUT_DIR)\connection_prefix_bad_client_test.exe build_gpr: msbuild grpc.sln /t:gpr /p:Configuration=Debug /p:Linkage-grpc_dependencies_zlib=static build_gpr_test_util: @@ -2911,3 +2918,7 @@ Debug\end2end_certs.lib: $(OUT_DIR) echo Building end2end_certs $(CC) $(CFLAGS) /Fo:$(OUT_DIR)\ $(REPO_ROOT)\test\core\end2end\data\test_root_cert.c $(REPO_ROOT)\test\core\end2end\data\server1_cert.c $(REPO_ROOT)\test\core\end2end\data\server1_key.c $(LIBTOOL) /OUT:"Debug\end2end_certs.lib" $(OUT_DIR)\test_root_cert.obj $(OUT_DIR)\server1_cert.obj $(OUT_DIR)\server1_key.obj +Debug\bad_client_test.lib: $(OUT_DIR) + echo Building bad_client_test + $(CC) $(CFLAGS) /Fo:$(OUT_DIR)\ $(REPO_ROOT)\test\core\bad_client\bad_client.c + $(LIBTOOL) /OUT:"Debug\bad_client_test.lib" $(OUT_DIR)\bad_client.obj diff --git a/vsprojects/README.md b/vsprojects/README.md index 355ef75724..14178daaa7 100644 --- a/vsprojects/README.md +++ b/vsprojects/README.md @@ -31,4 +31,13 @@ Also, you can `make.bat` directly to build and run gRPC tests. ``` > REM Run from this directory. > make.bat alarm_test -```
\ No newline at end of file +``` + +# Building protoc plugins +For generating service stub code, gRPC relies on plugins for `protoc` (the protocol buffer compiler). The solution `grpc_protoc_plugins.sln` allows you to build +Windows .exe binaries of gRPC protoc plugins. + +1. Open solution `third_party\protobuf\vsprojects\protobuf.sln` +2. Accept the conversion to newer Visual Studio version and ignore errors about gtest. +3. Build libprotoc in Release mode. +4. Open solution `vsprojects\grpc_protoc_plugins.sln` and build it in Release mode. As a result, you should obtain a set of gRPC protoc plugin binaries (`grpc_cpp_plugin.exe`, `grpc_csharp_plugin.exe`, ...) diff --git a/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj b/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj new file mode 100644 index 0000000000..d2669b4401 --- /dev/null +++ b/vsprojects/grpc_cpp_plugin/grpc_cpp_plugin.vcxproj @@ -0,0 +1,169 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{7E51A25F-AC59-488F-906C-C60FAAE706AA}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_cpp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_cpp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_cpp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_cpp_plugin</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\cpp_plugin.cc"> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ProjectReference Include="..\grpc_plugin_support\grpc_plugin_support.vcxproj"> + <Project>{B6E81D84-2ACB-41B8-8781-493A944C7817}</Project> + </ProjectReference> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj b/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj new file mode 100644 index 0000000000..10d1e968fc --- /dev/null +++ b/vsprojects/grpc_csharp_plugin/grpc_csharp_plugin.vcxproj @@ -0,0 +1,169 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{3C813052-A49A-4662-B90A-1ADBEC7EE453}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_csharp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_csharp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_csharp_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_csharp_plugin</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\csharp_plugin.cc"> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ProjectReference Include="..\grpc_plugin_support\grpc_plugin_support.vcxproj"> + <Project>{B6E81D84-2ACB-41B8-8781-493A944C7817}</Project> + </ProjectReference> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj b/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj new file mode 100644 index 0000000000..23affd158d --- /dev/null +++ b/vsprojects/grpc_objective_c_plugin/grpc_objective_c_plugin.vcxproj @@ -0,0 +1,169 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{19564640-CEE6-4921-ABA5-676ED79A36F6}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_objective_c_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_objective_c_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_objective_c_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_objective_c_plugin</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\objective_c_plugin.cc"> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ProjectReference Include="..\grpc_plugin_support\grpc_plugin_support.vcxproj"> + <Project>{B6E81D84-2ACB-41B8-8781-493A944C7817}</Project> + </ProjectReference> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj b/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj new file mode 100644 index 0000000000..c0188e56e7 --- /dev/null +++ b/vsprojects/grpc_plugin_support/grpc_plugin_support.vcxproj @@ -0,0 +1,179 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{B6E81D84-2ACB-41B8-8781-493A944C7817}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>StaticLibrary</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>StaticLibrary</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>StaticLibrary</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>StaticLibrary</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_plugin_support</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_plugin_support</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_plugin_support</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_plugin_support</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClInclude Include="..\..\src\compiler\config.h" /> + <ClInclude Include="..\..\src\compiler\cpp_generator.h" /> + <ClInclude Include="..\..\src\compiler\cpp_generator_helpers.h" /> + <ClInclude Include="..\..\src\compiler\csharp_generator.h" /> + <ClInclude Include="..\..\src\compiler\csharp_generator_helpers.h" /> + <ClInclude Include="..\..\src\compiler\generator_helpers.h" /> + <ClInclude Include="..\..\src\compiler\objective_c_generator.h" /> + <ClInclude Include="..\..\src\compiler\objective_c_generator_helpers.h" /> + <ClInclude Include="..\..\src\compiler\python_generator.h" /> + <ClInclude Include="..\..\src\compiler\ruby_generator.h" /> + <ClInclude Include="..\..\src\compiler\ruby_generator_helpers-inl.h" /> + <ClInclude Include="..\..\src\compiler\ruby_generator_map-inl.h" /> + <ClInclude Include="..\..\src\compiler\ruby_generator_string-inl.h" /> + </ItemGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\cpp_generator.cc"> + </ClCompile> + <ClCompile Include="..\..\src\compiler\csharp_generator.cc"> + </ClCompile> + <ClCompile Include="..\..\src\compiler\objective_c_generator.cc"> + </ClCompile> + <ClCompile Include="..\..\src\compiler\python_generator.cc"> + </ClCompile> + <ClCompile Include="..\..\src\compiler\ruby_generator.cc"> + </ClCompile> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/grpc_protoc_plugins.sln b/vsprojects/grpc_protoc_plugins.sln new file mode 100644 index 0000000000..be3ccf9bbe --- /dev/null +++ b/vsprojects/grpc_protoc_plugins.sln @@ -0,0 +1,93 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 2013 +VisualStudioVersion = 12.0.21005.1 +MinimumVisualStudioVersion = 10.0.40219.1 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_plugin_support", "grpc_plugin_support\grpc_plugin_support.vcxproj", "{B6E81D84-2ACB-41B8-8781-493A944C7817}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_cpp_plugin", "grpc_cpp_plugin\grpc_cpp_plugin.vcxproj", "{7E51A25F-AC59-488F-906C-C60FAAE706AA}" + ProjectSection(ProjectDependencies) = postProject + {B6E81D84-2ACB-41B8-8781-493A944C7817} = {B6E81D84-2ACB-41B8-8781-493A944C7817} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_csharp_plugin", "grpc_csharp_plugin\grpc_csharp_plugin.vcxproj", "{3C813052-A49A-4662-B90A-1ADBEC7EE453}" + ProjectSection(ProjectDependencies) = postProject + {B6E81D84-2ACB-41B8-8781-493A944C7817} = {B6E81D84-2ACB-41B8-8781-493A944C7817} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_objective_c_plugin", "grpc_objective_c_plugin\grpc_objective_c_plugin.vcxproj", "{19564640-CEE6-4921-ABA5-676ED79A36F6}" + ProjectSection(ProjectDependencies) = postProject + {B6E81D84-2ACB-41B8-8781-493A944C7817} = {B6E81D84-2ACB-41B8-8781-493A944C7817} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_python_plugin", "grpc_python_plugin\grpc_python_plugin.vcxproj", "{DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}" + ProjectSection(ProjectDependencies) = postProject + {B6E81D84-2ACB-41B8-8781-493A944C7817} = {B6E81D84-2ACB-41B8-8781-493A944C7817} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "grpc_ruby_plugin", "grpc_ruby_plugin\grpc_ruby_plugin.vcxproj", "{069E9D05-B78B-4751-9252-D21EBAE7DE8E}" + ProjectSection(ProjectDependencies) = postProject + {B6E81D84-2ACB-41B8-8781-493A944C7817} = {B6E81D84-2ACB-41B8-8781-493A944C7817} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Debug|Win32.ActiveCfg = Debug|Win32 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Debug|Win32.Build.0 = Debug|Win32 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Debug|x64.ActiveCfg = Debug|x64 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Debug|x64.Build.0 = Debug|x64 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Release|Win32.ActiveCfg = Release|Win32 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Release|Win32.Build.0 = Release|Win32 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Release|x64.ActiveCfg = Release|x64 + {B6E81D84-2ACB-41B8-8781-493A944C7817}.Release|x64.Build.0 = Release|x64 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Debug|Win32.ActiveCfg = Debug|Win32 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Debug|Win32.Build.0 = Debug|Win32 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Debug|x64.ActiveCfg = Debug|x64 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Debug|x64.Build.0 = Debug|x64 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Release|Win32.ActiveCfg = Release|Win32 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Release|Win32.Build.0 = Release|Win32 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Release|x64.ActiveCfg = Release|x64 + {7E51A25F-AC59-488F-906C-C60FAAE706AA}.Release|x64.Build.0 = Release|x64 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Debug|Win32.ActiveCfg = Debug|Win32 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Debug|Win32.Build.0 = Debug|Win32 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Debug|x64.ActiveCfg = Debug|x64 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Debug|x64.Build.0 = Debug|x64 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Release|Win32.ActiveCfg = Release|Win32 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Release|Win32.Build.0 = Release|Win32 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Release|x64.ActiveCfg = Release|x64 + {3C813052-A49A-4662-B90A-1ADBEC7EE453}.Release|x64.Build.0 = Release|x64 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Debug|Win32.ActiveCfg = Debug|Win32 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Debug|Win32.Build.0 = Debug|Win32 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Debug|x64.ActiveCfg = Debug|x64 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Debug|x64.Build.0 = Debug|x64 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Release|Win32.ActiveCfg = Release|Win32 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Release|Win32.Build.0 = Release|Win32 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Release|x64.ActiveCfg = Release|x64 + {19564640-CEE6-4921-ABA5-676ED79A36F6}.Release|x64.Build.0 = Release|x64 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Debug|Win32.ActiveCfg = Debug|Win32 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Debug|Win32.Build.0 = Debug|Win32 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Debug|x64.ActiveCfg = Debug|x64 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Debug|x64.Build.0 = Debug|x64 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Release|Win32.ActiveCfg = Release|Win32 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Release|Win32.Build.0 = Release|Win32 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Release|x64.ActiveCfg = Release|x64 + {DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}.Release|x64.Build.0 = Release|x64 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Debug|Win32.ActiveCfg = Debug|Win32 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Debug|Win32.Build.0 = Debug|Win32 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Debug|x64.ActiveCfg = Debug|x64 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Debug|x64.Build.0 = Debug|x64 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Release|Win32.ActiveCfg = Release|Win32 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Release|Win32.Build.0 = Release|Win32 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Release|x64.ActiveCfg = Release|x64 + {069E9D05-B78B-4751-9252-D21EBAE7DE8E}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj b/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj new file mode 100644 index 0000000000..eadc0a070b --- /dev/null +++ b/vsprojects/grpc_python_plugin/grpc_python_plugin.vcxproj @@ -0,0 +1,169 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{DF52D501-A6CF-4E6F-BA38-6EBE2E8DAFB2}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_python_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_python_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_python_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_python_plugin</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\python_plugin.cc"> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ProjectReference Include="..\grpc_plugin_support\grpc_plugin_support.vcxproj"> + <Project>{B6E81D84-2ACB-41B8-8781-493A944C7817}</Project> + </ProjectReference> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj b/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj new file mode 100644 index 0000000000..0655bc816a --- /dev/null +++ b/vsprojects/grpc_ruby_plugin/grpc_ruby_plugin.vcxproj @@ -0,0 +1,169 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{069E9D05-B78B-4751-9252-D21EBAE7DE8E}</ProjectGuid> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '10.0'" Label="Configuration"> + <PlatformToolset>v100</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '11.0'" Label="Configuration"> + <PlatformToolset>v110</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(VisualStudioVersion)' == '12.0'" Label="Configuration"> + <PlatformToolset>v120</PlatformToolset> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + <Import Project="..\protoc.props" /> + <Import Project="..\protobuf.props" /> + <Import Project="..\global.props" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <TargetName>grpc_ruby_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <TargetName>grpc_ruby_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <TargetName>grpc_ruby_plugin</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <TargetName>grpc_ruby_plugin</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_USE_32BIT_TIME_T;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <PrecompiledHeader>NotUsing</PrecompiledHeader> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <SDLCheck>true</SDLCheck> + </ClCompile> + <Link> + <SubSystem>Console</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="..\..\src\compiler\ruby_plugin.cc"> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ProjectReference Include="..\grpc_plugin_support\grpc_plugin_support.vcxproj"> + <Project>{B6E81D84-2ACB-41B8-8781-493A944C7817}</Project> + </ProjectReference> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project> + diff --git a/vsprojects/protoc.props b/vsprojects/protoc.props new file mode 100644 index 0000000000..6024022690 --- /dev/null +++ b/vsprojects/protoc.props @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ImportGroup Label="PropertySheets" />
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup />
+ <ItemDefinitionGroup>
+ <Link>
+ <AdditionalDependencies>libprotoc.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalLibraryDirectories>$(ProjectDir)\..\..\third_party\protobuf\vsprojects\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup />
+</Project>
\ No newline at end of file |