{- git-annex assistant commit thread
 -
 - Copyright 2012 Joey Hess <joey@kitenet.net>
 -
 - Licensed under the GNU GPL version 3 or higher.
 -}

{-# LANGUAGE CPP, BangPatterns #-}

module Assistant.Threads.Committer where

import Assistant.Common
import Assistant.Changes
import Assistant.Types.Changes
import Assistant.Commits
import Assistant.Alert
import Assistant.DaemonStatus
import Assistant.TransferQueue
import Assistant.Drop
import Logs.Transfer
import Logs.Location
import qualified Annex.Queue
import qualified Git.Command
import qualified Git.LsFiles
import qualified Git.Version
import qualified Command.Add
import Utility.ThreadScheduler
import qualified Utility.Lsof as Lsof
import qualified Utility.DirWatcher as DirWatcher
import Types.KeySource
import Config
import Annex.Exception
import Annex.Content
import Annex.Link
import Annex.CatFile
import qualified Annex
import Utility.InodeCache
import Annex.Content.Direct

import Data.Time.Clock
import Data.Tuple.Utils
import qualified Data.Set as S
import qualified Data.Map as M
import Data.Either
import Control.Concurrent

{- This thread makes git commits at appropriate times. -}
commitThread :: NamedThread
commitThread = namedThread "Committer" $ do
	delayadd <- liftAnnex $
		maybe delayaddDefault (return . Just . Seconds)
			=<< annexDelayAdd <$> Annex.getGitConfig
	waitChangeTime $ \(changes, time) -> do
		readychanges <- handleAdds delayadd changes
		if shouldCommit time readychanges
			then do
				debug
					[ "committing"
					, show (length readychanges)
					, "changes"
					]
				void $ alertWhile commitAlert $
					liftAnnex commitStaged
				recordCommit
				mapM_ checkChangeContent readychanges
			else refill readychanges

refill :: [Change] -> Assistant ()	
refill [] = noop
refill cs = do
	debug ["delaying commit of", show (length cs), "changes"]
	refillChanges cs

{- Wait for one or more changes to arrive to be committed. -}
waitChangeTime :: (([Change], UTCTime) -> Assistant ()) -> Assistant ()
waitChangeTime a = runEvery (Seconds 1) <~> do
	-- We already waited one second as a simple rate limiter.
	-- Next, wait until at least one change is available for
	-- processing.
	changes <- getChanges
	-- See if now's a good time to commit.
	now <- liftIO getCurrentTime
	case (shouldCommit now changes, possiblyrename changes) of
		(True, False) -> a (changes, now)
		(True, True) -> do
			morechanges <- getrelatedchanges changes
			a (changes ++ morechanges, now)
		_ -> refill changes
  where
	{- Did we perhaps only get one of the AddChange and RmChange pair
	 - that make up a file rename? Or some of the pairs that make up 
	 - a directory rename?
	 -}
	possiblyrename cs = all renamepart cs

	renamepart (PendingAddChange _ _) = True
	renamepart c = isRmChange c

	{- Gets changes related to the passed changes, without blocking
	 - very long.
	 -
	 - If there are multiple RmChanges, this is probably a directory
	 - rename, in which case it may be necessary to wait longer to get
	 - all the Changes involved.
	 -}
	getrelatedchanges oldchanges
		| length (filter isRmChange oldchanges) > 1 =
			concat <$> getbatchchanges []
		| otherwise = do
			liftIO humanImperceptibleDelay
			getAnyChanges
	getbatchchanges cs = do
		liftIO $ threadDelay $ fromIntegral $ oneSecond `div` 10
		cs' <- getAnyChanges
		if null cs'
			then return cs
			else getbatchchanges (cs':cs)

isRmChange :: Change -> Bool
isRmChange (Change { changeInfo = i }) | i == RmChange = True
isRmChange _ = False

{- An amount of time that is hopefully imperceptably short for humans,
 - while long enough for a computer to get some work done. 
 - Note that 0.001 is a little too short for rename change batching to
 - work. -}
humanImperceptibleInterval :: NominalDiffTime
humanImperceptibleInterval = 0.01

humanImperceptibleDelay :: IO ()
humanImperceptibleDelay = threadDelay $
	truncate $ humanImperceptibleInterval * fromIntegral oneSecond

{- Decide if now is a good time to make a commit.
 - Note that the list of changes has an undefined order.
 -
 - Current strategy: If there have been 10 changes within the past second,
 - a batch activity is taking place, so wait for later.
 -}
shouldCommit :: UTCTime -> [Change] -> Bool
shouldCommit now changes
	| len == 0 = False
	| len > 5000 = True -- avoid bloating change pool too much
	| length recentchanges < 10 = True
	| otherwise = False -- batch activity
  where
	len = length changes
	thissecond c = timeDelta c <= 1
	recentchanges = filter thissecond changes
	timeDelta c = now `diffUTCTime` changeTime c

commitStaged :: Annex Bool
commitStaged = do
	{- This could fail if there's another commit being made by
	 - something else. -}
	v <- tryAnnex Annex.Queue.flush
	case v of
		Left _ -> return False
		Right _ -> do
			direct <- isDirect
			let params = nomessage $ catMaybes
				[ Just $ Param "--quiet"
				{- In indirect mode, avoid running the
				 - usual git-annex pre-commit hook;
				 - watch does the same symlink fixing,
				 - and we don't want to deal with unlocked
				 - files in these commits. -}
				, if direct then Nothing else Just $ Param "--no-verify"
				]
			{- Empty commits may be made if tree changes cancel
			 - each other out, etc. Git returns nonzero on those,
			 - so don't propigate out commit failures. -}
			void $ inRepo $ catchMaybeIO . 
				Git.Command.runQuiet (Param "commit" : params)
			return True
  where
	nomessage ps
		| Git.Version.older "1.7.2" =
			Param "-m" : Param "autocommit" : ps
		| Git.Version.older "1.7.8" =
			Param "--allow-empty-message" :
			Param "-m" : Param "" : ps
		| otherwise =
			Param "--allow-empty-message" :
			Param "--no-edit" : Param "-m" : Param "" : ps

{- OSX needs a short delay after a file is added before locking it down,
 - when using a non-direct mode repository, as pasting a file seems to
 - try to set file permissions or otherwise access the file after closing
 - it. -}
delayaddDefault :: Annex (Maybe Seconds)
#ifdef darwin_HOST_OS
delayaddDefault = ifM isDirect
	( return Nothing
	, return $ Just $ Seconds 1
	)
#else
delayaddDefault = return Nothing
#endif

{- If there are PendingAddChanges, or InProcessAddChanges, the files
 - have not yet actually been added to the annex, and that has to be done
 - now, before committing.
 -
 - Deferring the adds to this point causes batches to be bundled together,
 - which allows faster checking with lsof that the files are not still open
 - for write by some other process, and faster checking with git-ls-files
 - that the files are not already checked into git.
 -
 - When a file is added, Inotify will notice the new symlink. So this waits
 - for additional Changes to arrive, so that the symlink has hopefully been
 - staged before returning, and will be committed immediately.
 -
 - OTOH, for kqueue, eventsCoalesce, so instead the symlink is directly
 - created and staged.
 -
 - Returns a list of all changes that are ready to be committed.
 - Any pending adds that are not ready yet are put back into the ChangeChan,
 - where they will be retried later.
 -}
handleAdds :: Maybe Seconds -> [Change] -> Assistant [Change]
handleAdds delayadd cs = returnWhen (null incomplete) $ do
	let (pending, inprocess) = partition isPendingAddChange incomplete
	direct <- liftAnnex isDirect
	pending' <- if direct
		then return pending
		else findnew pending
	(postponed, toadd) <- partitionEithers <$> safeToAdd delayadd pending' inprocess

	unless (null postponed) $
		refillChanges postponed

	returnWhen (null toadd) $ do
		added <- addaction toadd $
			catMaybes <$> if direct
				then adddirect toadd
				else forM toadd add
		if DirWatcher.eventsCoalesce || null added || direct
			then return $ added ++ otherchanges
			else do
				r <- handleAdds delayadd =<< getChanges
				return $ r ++ added ++ otherchanges
  where
	(incomplete, otherchanges) = partition (\c -> isPendingAddChange c || isInProcessAddChange c) cs
		
	findnew [] = return []
	findnew pending@(exemplar:_) = do
		(!newfiles, cleanup) <- liftAnnex $
			inRepo (Git.LsFiles.notInRepo False $ map changeFile pending)
		void $ liftIO cleanup
		-- note: timestamp info is lost here
		let ts = changeTime exemplar
		return $ map (PendingAddChange ts) newfiles

	returnWhen c a
		| c = return otherchanges
		| otherwise = a

	add :: Change -> Assistant (Maybe Change)
	add change@(InProcessAddChange { keySource = ks }) = 
		catchDefaultIO Nothing <~> do
			sanitycheck ks $ do
				key <- liftAnnex $ do
					showStart "add" $ keyFilename ks
					Command.Add.ingest $ Just ks
				maybe (failedingest change) (done change $ keyFilename ks) key
	add _ = return Nothing

	{- In direct mode, avoid overhead of re-injesting a renamed
	 - file, by examining the other Changes to see if a removed
	 - file has the same InodeCache as the new file. If so,
	 - we can just update bookkeeping, and stage the file in git.
	 -}
	adddirect :: [Change] -> Assistant [Maybe Change]
	adddirect toadd = do
		ct <- liftAnnex compareInodeCachesWith
		m <- liftAnnex $ removedKeysMap ct cs
		if M.null m
			then forM toadd add
			else forM toadd $ \c -> do
				mcache <- liftIO $ genInodeCache $ changeFile c
				case mcache of
					Nothing -> add c
					Just cache ->
						case M.lookup (inodeCacheToKey ct cache) m of
							Nothing -> add c
							Just k -> fastadd c k

	fastadd :: Change -> Key -> Assistant (Maybe Change)
	fastadd change key = do
		let source = keySource change
		liftAnnex $ Command.Add.finishIngestDirect key source
		done change (keyFilename source) key

	removedKeysMap :: InodeComparisonType -> [Change] -> Annex (M.Map InodeCacheKey Key)
	removedKeysMap ct l = do
		mks <- forM (filter isRmChange l) $ \c ->
			catKeyFile $ changeFile c
		M.fromList . concat <$> mapM mkpairs (catMaybes mks)
	  where
		mkpairs k = map (\c -> (inodeCacheToKey ct c, k)) <$>
			recordedInodeCache k

	failedingest change = do
		refill [retryChange change]
		liftAnnex showEndFail
		return Nothing

	done change file key = liftAnnex $ do
		logStatus key InfoPresent
		link <- ifM isDirect
			( inRepo $ gitAnnexLink file key
			, Command.Add.link file key True
			)
		whenM (pure DirWatcher.eventsCoalesce <||> isDirect) $ do
			stageSymlink file =<< hashSymlink link
		showEndOk
		return $ Just $ finishedChange change key

	{- Check that the keysource's keyFilename still exists,
	 - and is still a hard link to its contentLocation,
	 - before ingesting it. -}
	sanitycheck keysource a = do
		fs <- liftIO $ getSymbolicLinkStatus $ keyFilename keysource
		ks <- liftIO $ getSymbolicLinkStatus $ contentLocation keysource
		if deviceID ks == deviceID fs && fileID ks == fileID fs
			then a
			else do
				-- remove the hard link
				when (contentLocation keysource /= keyFilename keysource) $
					void $ liftIO $ tryIO $ removeFile $ contentLocation keysource
				return Nothing

	{- Shown an alert while performing an action to add a file or
	 - files. When only one file is added, its name is shown
	 - in the alert. When it's a batch add, the number of files added
	 - is shown.
	 -
	 - Add errors tend to be transient and will be
	 - automatically dealt with, so the alert is always told
	 - the add succeeded.
	 -}
	addaction [] a = a
	addaction toadd a = alertWhile' (addFileAlert msg) $
		(,) 
			<$> pure True
			<*> a
	  where
	  	msg = case toadd of
			(InProcessAddChange { keySource = ks }:[]) ->
				keyFilename ks
			_ -> show (length toadd) ++ " files"

{- Files can Either be Right to be added now,
 - or are unsafe, and must be Left for later.
 -
 - Check by running lsof on the repository.
 -}
safeToAdd :: Maybe Seconds -> [Change] -> [Change] -> Assistant [Either Change Change]
safeToAdd _ [] [] = return []
safeToAdd delayadd pending inprocess = do
	maybe noop (liftIO . threadDelaySeconds) delayadd
	liftAnnex $ do
		keysources <- mapM Command.Add.lockDown (map changeFile pending)
		let inprocess' = inprocess ++ catMaybes (map mkinprocess $ zip pending keysources)
		openfiles <- S.fromList . map fst3 . filter openwrite <$>
			findopenfiles (map keySource inprocess')
		let checked = map (check openfiles) inprocess'

		{- If new events are received when files are closed,
		 - there's no need to retry any changes that cannot
		 - be done now. -}
		if DirWatcher.closingTracked
			then do
				mapM_ canceladd $ lefts checked
				allRight $ rights checked
			else return checked
  where
	check openfiles change@(InProcessAddChange { keySource = ks })
		| S.member (contentLocation ks) openfiles = Left change
	check _ change = Right change

	mkinprocess (c, Just ks) = Just $ InProcessAddChange
		{ changeTime = changeTime c
		, keySource = ks
		}
	mkinprocess (_, Nothing) = Nothing

	canceladd (InProcessAddChange { keySource = ks }) = do
		warning $ keyFilename ks
			++ " still has writers, not adding"
		-- remove the hard link
		when (contentLocation ks /= keyFilename ks) $
			void $ liftIO $ tryIO $ removeFile $ contentLocation ks
	canceladd _ = noop

	openwrite (_file, mode, _pid)
		| mode == Lsof.OpenWriteOnly = True
		| mode == Lsof.OpenReadWrite = True
		| mode == Lsof.OpenUnknown = True
		| otherwise = False

	allRight = return . map Right

	{- Normally the KeySources are locked down inside the temp directory,
	 - so can just lsof that, which is quite efficient.
	 -
	 - In crippled filesystem mode, there is no lock down, so must run lsof
	 - on each individual file.
	 -}
	findopenfiles keysources = ifM crippledFileSystem
		( liftIO $ do
			let segments = segmentXargs $ map keyFilename keysources
			concat <$> forM segments (\fs -> Lsof.query $ "--" : fs)
		, do
			tmpdir <- fromRepo gitAnnexTmpDir
			liftIO $ Lsof.queryDir tmpdir
		)

{- After a Change is committed, queue any necessary transfers or drops
 - of the content of the key.
 -
 - This is not done during the startup scan, because the expensive
 - transfer scan does the same thing then.
 -}
checkChangeContent :: Change -> Assistant ()
checkChangeContent change@(Change { changeInfo = i }) =
	case changeInfoKey i of
		Nothing -> noop
		Just k -> whenM (scanComplete <$> getDaemonStatus) $ do
			present <- liftAnnex $ inAnnex k
			if present
				then queueTransfers "new file created" Next k (Just f) Upload
				else queueTransfers "new or renamed file wanted" Next k (Just f) Download
			handleDrops "file renamed" present k (Just f) Nothing
  where
	f = changeFile change
checkChangeContent _ = noop