From c27d5ba97ff1f15a178751759a54c511f5e13652 Mon Sep 17 00:00:00 2001 From: waker Date: Sat, 30 Apr 2011 21:26:32 +0200 Subject: 0.5.0-beta2 build --- lib-x86-32/include/jpegint.h | 407 ++++++++ lib-x86-32/include/jpeglib.h | 1160 +++++++++++++++++++++ lib-x86-32/include/png.h | 2309 ++++++++++++++++++++++++++++++++++++++++++ lib-x86-32/include/pngconf.h | 649 ++++++++++++ lib-x86-32/libjpeg.a | Bin 0 -> 1449342 bytes lib-x86-32/libpng15.a | Bin 0 -> 700984 bytes 6 files changed, 4525 insertions(+) create mode 100644 lib-x86-32/include/jpegint.h create mode 100644 lib-x86-32/include/jpeglib.h create mode 100644 lib-x86-32/include/png.h create mode 100644 lib-x86-32/include/pngconf.h create mode 100644 lib-x86-32/libjpeg.a create mode 100644 lib-x86-32/libpng15.a (limited to 'lib-x86-32') diff --git a/lib-x86-32/include/jpegint.h b/lib-x86-32/include/jpegint.h new file mode 100644 index 00000000..0c27a4e4 --- /dev/null +++ b/lib-x86-32/include/jpegint.h @@ -0,0 +1,407 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_arith_encoder jIAEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_arith_decoder jIADecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jzero_far jZeroFar +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAGTable7 +#define jpeg_natural_order6 jZAGTable6 +#define jpeg_natural_order5 jZAGTable5 +#define jpeg_natural_order4 jZAGTable4 +#define jpeg_natural_order3 jZAGTable3 +#define jpeg_natural_order2 jZAGTable2 +#define jpeg_aritab jAriTab +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/lib-x86-32/include/jpeglib.h b/lib-x86-32/include/jpeglib.h new file mode 100644 index 00000000..1eb1fac0 --- /dev/null +++ b/lib-x86-32/include/jpeglib.h @@ -0,0 +1,1160 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80". + */ + +#define JPEG_LIB_VERSION 80 /* Compatibility version 8.0 */ +#define JPEG_LIB_VERSION_MAJOR 8 +#define JPEG_LIB_VERSION_MINOR 3 + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/lib-x86-32/include/png.h b/lib-x86-32/include/png.h new file mode 100644 index 00000000..0af42b17 --- /dev/null +++ b/lib-x86-32/include/png.h @@ -0,0 +1,2309 @@ + +/* png.h - header file for PNG reference library + * + * libpng version 1.5.2 - March 31, 2011 + * Copyright (c) 1998-2011 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license (See LICENSE, below) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.5.2 - March 31, 2011: Glenn + * See also "Contributing Authors", below. + * + * Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 + * 1.0.8rc1 1 10008 2.1.0.8rc1 + * 1.0.8 1 10008 2.1.0.8 + * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 + * 1.0.9rc1 1 10009 2.1.0.9rc1 + * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 + * 1.0.9rc2 1 10009 2.1.0.9rc2 + * 1.0.9 1 10009 2.1.0.9 + * 1.0.10beta1 1 10010 2.1.0.10beta1 + * 1.0.10rc1 1 10010 2.1.0.10rc1 + * 1.0.10 1 10010 2.1.0.10 + * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 + * 1.0.11rc1 1 10011 2.1.0.11rc1 + * 1.0.11 1 10011 2.1.0.11 + * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 + * 1.0.12rc1 2 10012 2.1.0.12rc1 + * 1.0.12 2 10012 2.1.0.12 + * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned) + * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 + * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 + * 1.2.0rc1 3 10200 3.1.2.0rc1 + * 1.2.0 3 10200 3.1.2.0 + * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4 + * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 + * 1.2.1 3 10201 3.1.2.1 + * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 + * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 + * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 + * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 + * 1.0.13 10 10013 10.so.0.1.0.13 + * 1.2.2 12 10202 12.so.0.1.2.2 + * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 + * 1.2.3 12 10203 12.so.0.1.2.3 + * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 + * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1 + * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 + * 1.0.14 10 10014 10.so.0.1.0.14 + * 1.2.4 13 10204 12.so.0.1.2.4 + * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 + * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3 + * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3 + * 1.0.15 10 10015 10.so.0.1.0.15 + * 1.2.5 13 10205 12.so.0.1.2.5 + * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 + * 1.0.16 10 10016 10.so.0.1.0.16 + * 1.2.6 13 10206 12.so.0.1.2.6 + * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 + * 1.0.17rc1 10 10017 12.so.0.1.0.17rc1 + * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 + * 1.0.17 10 10017 12.so.0.1.0.17 + * 1.2.7 13 10207 12.so.0.1.2.7 + * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 + * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 + * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 + * 1.0.18 10 10018 12.so.0.1.0.18 + * 1.2.8 13 10208 12.so.0.1.2.8 + * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 + * 1.2.9beta4-11 13 10209 12.so.0.9[.0] + * 1.2.9rc1 13 10209 12.so.0.9[.0] + * 1.2.9 13 10209 12.so.0.9[.0] + * 1.2.10beta1-7 13 10210 12.so.0.10[.0] + * 1.2.10rc1-2 13 10210 12.so.0.10[.0] + * 1.2.10 13 10210 12.so.0.10[.0] + * 1.4.0beta1-5 14 10400 14.so.0.0[.0] + * 1.2.11beta1-4 13 10211 12.so.0.11[.0] + * 1.4.0beta7-8 14 10400 14.so.0.0[.0] + * 1.2.11 13 10211 12.so.0.11[.0] + * 1.2.12 13 10212 12.so.0.12[.0] + * 1.4.0beta9-14 14 10400 14.so.0.0[.0] + * 1.2.13 13 10213 12.so.0.13[.0] + * 1.4.0beta15-36 14 10400 14.so.0.0[.0] + * 1.4.0beta37-87 14 10400 14.so.14.0[.0] + * 1.4.0rc01 14 10400 14.so.14.0[.0] + * 1.4.0beta88-109 14 10400 14.so.14.0[.0] + * 1.4.0rc02-08 14 10400 14.so.14.0[.0] + * 1.4.0 14 10400 14.so.14.0[.0] + * 1.4.1beta01-03 14 10401 14.so.14.1[.0] + * 1.4.1rc01 14 10401 14.so.14.1[.0] + * 1.4.1beta04-12 14 10401 14.so.14.1[.0] + * 1.4.1 14 10401 14.so.14.1[.0] + * 1.4.2 14 10402 14.so.14.2[.0] + * 1.4.3 14 10403 14.so.14.3[.0] + * 1.4.4 14 10404 14.so.14.4[.0] + * 1.5.0beta01-58 15 10500 15.so.15.0[.0] + * 1.5.0rc01-07 15 10500 15.so.15.0[.0] + * 1.5.0 15 10500 15.so.15.0[.0] + * 1.5.1beta01-11 15 10501 15.so.15.1[.0] + * 1.5.1rc01-02 15 10501 15.so.15.1[.0] + * 1.5.1 15 10501 15.so.15.1[.0] + * 1.5.2beta01-03 15 10502 15.so.15.2[.0] + * 1.5.2rc01-03 15 10502 15.so.15.2[.0] + * 1.5.2 15 10502 15.so.15.2[.0] + * + * Henceforth the source version will match the shared-library major + * and minor numbers; the shared-library major version number will be + * used for changes in backward compatibility, as it is intended. The + * PNG_LIBPNG_VER macro, which is not used within libpng but is available + * for applications, is an unsigned integer of the form xyyzz corresponding + * to the source version x.y.z (leading zeros in y and z). Beta versions + * were given the previous public release number plus a letter, until + * version 1.0.6j; from then on they were given the upcoming public + * release number plus "betaNN" or "rcN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * DLLNUM will change each time there are forward or backward changes + * in binary compatibility (e.g., when a new feature is added). + * + * See libpng-manual.txt or libpng.3 for more information. The PNG + * specification is available as a W3C Recommendation and as an ISO + * Specification, +# endif + + /* Need the time information for converting tIME chunks, it + * defines struct tm: + */ +# ifdef PNG_CONVERT_tIME_SUPPORTED + /* "time.h" functions are not supported on all operating systems */ +# include +# endif +# endif + +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 2. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 3. Exported library functions. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ +/* Section 1: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 2: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_5_2; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color FAR * png_colorp; +typedef PNG_CONST png_color FAR * png_const_colorp; +typedef png_color FAR * FAR * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 FAR * png_color_16p; +typedef PNG_CONST png_color_16 FAR * png_const_color_16p; +typedef png_color_16 FAR * FAR * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 FAR * png_color_8p; +typedef PNG_CONST png_color_8 FAR * png_const_color_8p; +typedef png_color_8 FAR * FAR * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry FAR * png_sPLT_entryp; +typedef PNG_CONST png_sPLT_entry FAR * png_const_sPLT_entryp; +typedef png_sPLT_entry FAR * FAR * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t FAR * png_sPLT_tp; +typedef PNG_CONST png_sPLT_t FAR * png_const_sPLT_tp; +typedef png_sPLT_t FAR * FAR * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text", "lang", and + * "lang_key" fields can be regular C strings, empty strings, or NULL pointers. + * However, the * structure returned by png_get_text() will always contain + * regular zero-terminated C strings (possibly empty), never NULL pointers, + * so they can be safely used in printf() and other string-handling functions. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + png_size_t text_length; /* length of the text string */ + png_size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text FAR * png_textp; +typedef PNG_CONST png_text FAR * png_const_textp; +typedef png_text FAR * FAR * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time FAR * png_timep; +typedef PNG_CONST png_time FAR * png_const_timep; +typedef png_time FAR * FAR * png_timepp; + +#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) || \ + defined(PNG_HANDLE_AS_UNKNOWN_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; + png_byte *data; + png_size_t size; + + /* libpng-using applications should NOT directly modify this byte. */ + png_byte location; /* mode of operation at read time */ +} +png_unknown_chunk; +typedef png_unknown_chunk FAR * png_unknown_chunkp; +typedef PNG_CONST png_unknown_chunk FAR * png_const_unknown_chunkp; +typedef png_unknown_chunk FAR * FAR * png_unknown_chunkpp; +#endif + +typedef struct png_info_def png_info; +typedef png_info FAR * png_infop; +typedef PNG_CONST png_info FAR * png_const_infop; +typedef png_info FAR * FAR * png_infopp; + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((png_size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001 +#define PNG_INFO_sBIT 0x0002 +#define PNG_INFO_cHRM 0x0004 +#define PNG_INFO_PLTE 0x0008 +#define PNG_INFO_tRNS 0x0010 +#define PNG_INFO_bKGD 0x0020 +#define PNG_INFO_hIST 0x0040 +#define PNG_INFO_pHYs 0x0080 +#define PNG_INFO_oFFs 0x0100 +#define PNG_INFO_tIME 0x0200 +#define PNG_INFO_pCAL 0x0400 +#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000L /* ESR, 1.0.6 */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + png_size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info FAR * png_row_infop; +typedef png_row_info FAR * FAR * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef struct png_struct_def png_struct; +typedef PNG_CONST png_struct FAR * png_const_structp; +typedef png_struct FAR * png_structp; + +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the + * application must include this before png.h to obtain the definition + * of jmp_buf. The function is required to be PNG_NORETURN. (Note that + * PNG_PTR_NORETURN is used here because current versions of the Microsoft + * C compiler do not support the PNG_NORETURN attribute on a pointer.) + * + * If you get a type warning from the compiler when linking against this line + * then your compiler has 'longjmp' that does not match the requirements of the + * compiler that built libpng. You will have to write a wrapper function for + * your compiler's longjmp and call png_set_longjmp_fn directly (not via the + * png_jmpbuf macro.) + * + * If you get a warning here while building the library you will need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +typedef PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), + PNG_PTR_NORETURN); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +typedef png_struct FAR * FAR * png_structpp; + +/* Section 3: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (ie return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start, + png_size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n). + */ +#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n)) + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size, + (png_const_structp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structp png_ptr, + png_size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, sizeof (jmp_buf))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_structp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORT(10, int, png_reset_zstream, (png_structp png_ptr)); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, png_size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structp png_ptr, + png_const_bytep data, png_size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_structp png_ptr), + PNG_ALLOCATED); + +PNG_EXPORT(19, void, png_info_init_3, (png_infopp info_ptr, + png_size_t png_info_struct_size)); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structp png_ptr, png_infop info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structp png_ptr, png_infop info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED +PNG_EXPORT(23, png_const_charp, png_convert_to_rfc1123, + (png_structp png_ptr, + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + PNG_CONST struct tm FAR * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, + (png_timep ptime, time_t ttime)); +#endif /* PNG_CONVERT_tIME_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16 bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structp png_ptr, + int error_action, double red, double green)); +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)); + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structp + png_ptr)); +#endif + +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, + (png_structp png_ptr, png_uint_32 filler, + int flags)); +#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)); +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)); +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_16_TO_8_SUPPORTED +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, + (png_structp png_ptr, png_colorp palette, + int num_palette, int maximum_colors, png_const_uint_16p histogram, + int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent) */ +PNG_FP_EXPORT(50, void, png_set_gamma, + (png_structp png_ptr, double screen_gamma, + double default_file_gamma)); +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structp png_ptr, + png_fixed_point screen_gamma, png_fixed_point default_file_gamma)); +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, + (png_structp png_ptr, png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, + (png_structp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structp png_ptr, png_infop info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_structp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, + (png_structp png_ptr, int crit_action, int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explination of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, + (png_structp png_ptr, int method, int filters)); + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \ + PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */ +/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_ + * defines, either the default (minimum-sum-of-absolute-differences), or + * the experimental method (weighted-minimum-sum-of-absolute-differences). + * + * Weights are factors >= 1.0, indicating how important it is to keep the + * filter type consistent between rows. Larger numbers mean the current + * filter is that many times as likely to be the same as the "num_weights" + * previous filters. This is cumulative for each previous row with a weight. + * There needs to be "num_weights" values in "filter_weights", or it can be + * NULL if the weights aren't being specified. Weights have no influence on + * the selection of the first row filter. Well chosen weights can (in theory) + * improve the compression for a given image. + * + * Costs are factors >= 1.0 indicating the relative decoding costs of a + * filter type. Higher costs indicate more decoding expense, and are + * therefore less likely to be selected over a filter with lower computational + * costs. There needs to be a value in "filter_costs" for each valid filter + * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't + * setting the costs. Costs try to improve the speed of decompression without + * unduly increasing the compressed image size. + * + * A negative weight or cost indicates the default value is to be used, and + * values in the range [0.0, 1.0) indicate the value is to remain unchanged. + * The default values for both weights and costs are currently 1.0, but may + * change if good general weighting/cost heuristics can be found. If both + * the weights and costs are set to 1.0, this degenerates the WEIGHTED method + * to the UNWEIGHTED method, but with added encoding time/computation. + */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)); +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structp png_ptr, + int heuristic_method, int num_weights, png_const_fixed_point_p + filter_weights, png_const_fixed_point_p filter_costs)); +#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ + +/* Heuristic used for row filter selection. These defines should NOT be + * changed. + */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer caclulations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +PNG_EXPORT(69, void, png_set_compression_level, + (png_structp png_ptr, int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structp png_ptr, + int strategy)); + +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structp png_ptr, + int method)); + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, + (png_structp png_ptr, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_structp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structp)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, (png_const_structp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, + (png_structp png_ptr, png_infop info_ptr, + png_bytep buffer, png_size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structp)); + +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_structp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +PNG_EXPORTA(94, png_voidp, png_malloc, + (png_structp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, + (png_structp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_structp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_structp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, + (png_structp png_ptr, png_infop info_ptr, png_uint_32 free_me, int num)); + +/* Reassign responsibility for freeing existing data, whether allocated + * by libpng or by the application */ +PNG_EXPORT(99, void, png_data_freer, + (png_structp png_ptr, png_infop info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008 +#define PNG_FREE_ICCP 0x0010 +#define PNG_FREE_SPLT 0x0020 +#define PNG_FREE_ROWS 0x0040 +#define PNG_FREE_PCAL 0x0080 +#define PNG_FREE_SCAL 0x0100 +#define PNG_FREE_UNKN 0x0200 +#define PNG_FREE_LIST 0x0400 +#define PNG_FREE_PLTE 0x1000 +#define PNG_FREE_TRNS 0x2000 +#define PNG_FREE_TEXT 0x4000 +#define PNG_FREE_ALL 0x7fff +#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_structp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +PNG_EXPORT(101, void, png_free_default, (png_structp png_ptr, png_voidp ptr)); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, + (png_structp png_ptr, png_const_charp error_message), + PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_structp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_structp png_ptr), PNG_NORETURN); +#endif + +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_structp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_structp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +# undef png_benign_error +PNG_EXPORT(107, void, png_benign_error, (png_structp png_ptr, + png_const_charp warning_message)); + +/* Same, chunk name is prepended to message. */ +# undef png_chunk_benign_error +PNG_EXPORT(108, void, png_chunk_benign_error, (png_structp png_ptr, + png_const_charp warning_message)); + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, + (png_const_structp png_ptr, png_const_infop info_ptr)); +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_structp png_ptr, + png_infop info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +#endif /* PNG_EASY_ACCESS_SUPPORTED */ + +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, + (png_const_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, + (png_const_structp png_ptr, png_infop info_ptr, + png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_structp png_ptr, png_infop info_ptr, + png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structp png_ptr, + png_const_infop info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)); +#ifdef PNG_FIXED_POINT_SUPPORTED /* Otherwise not implemented */ +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structp png_ptr, + png_const_infop info_ptr, png_fixed_point *int_white_x, + png_fixed_point *int_white_y, png_fixed_point *int_red_x, + png_fixed_point *int_red_y, png_fixed_point *int_green_x, + png_fixed_point *int_green_y, png_fixed_point *int_blue_x, + png_fixed_point *int_blue_y)); +#endif +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, + (png_structp png_ptr, png_infop info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)); +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_structp png_ptr, + png_infop info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, + (png_const_structp png_ptr, png_const_infop info_ptr, + double *file_gamma)); +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_fixed_point *int_file_gamma)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_structp png_ptr, + png_infop info_ptr, double file_gamma)); +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_structp png_ptr, + png_infop info_ptr, png_fixed_point int_file_gamma)); +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_16p *hist)); +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(142, void, png_set_hIST, (png_structp png_ptr, + png_infop info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 *width, png_uint_32 *height, int *bit_depth, int *color_type, + int *interlace_method, int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, int color_type, + int interlace_method, int compression_method, int filter_method)); + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_int_32 *offset_x, png_int_32 *offset_y, int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, + (png_structp png_ptr, png_infop info_ptr, + png_int_32 offset_x, png_int_32 offset_y, int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_charp *purpose, png_int_32 *X0, png_int_32 *X1, int *type, + int *nparams, + png_charp *units, png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_structp png_ptr, + png_infop info_ptr, + png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type, + int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, + (png_structp png_ptr, png_infop info_ptr, + png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, + (png_const_structp png_ptr, png_infop info_ptr, + png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, + (png_structp png_ptr, png_infop info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structp png_ptr, + png_const_infop info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, + (png_structp png_ptr, png_infop info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_structp png_ptr, + png_infop info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_charpp name, int *compression_type, png_bytepp profile, + png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, + (png_structp png_ptr, png_infop info_ptr, + png_const_charp name, int compression_type, png_const_bytep profile, + png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, png_uint_32, png_get_sPLT, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, + (png_structp png_ptr, png_infop info_ptr, + png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, png_uint_32, png_get_text, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, + (png_structp png_ptr, png_infop info_ptr, + png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, + (png_const_structp png_ptr, png_infop info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, + (png_structp png_ptr, png_infop info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, + (png_const_structp png_ptr, png_infop info_ptr, + png_bytep *trans_alpha, int *num_trans, png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, + (png_structp png_ptr, png_infop info_ptr, + png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, + (png_const_structp png_ptr, png_const_infop info_ptr, + int *unit, double *width, double *height)); +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_structp png_ptr, png_const_infop info_ptr, int *unit, + png_fixed_point *width, + png_fixed_point *height)); +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structp png_ptr, png_const_infop info_ptr, + int *unit, png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, + (png_structp png_ptr, png_infop info_ptr, + int unit, double width, double height)); +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_structp png_ptr, + png_infop info_ptr, int unit, png_fixed_point width, + png_fixed_point height)); +PNG_EXPORT(171, void, png_set_sCAL_s, + (png_structp png_ptr, png_infop info_ptr, + int unit, png_const_charp swidth, png_const_charp sheight)); +#endif /* PNG_sCAL_SUPPORTED */ + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +/* Provide a list of chunks and how they are to be handled, if the built-in + handling or default unknown chunk handling is not desired. Any chunks not + listed will be handled in the default manner. The IHDR and IEND chunks + must not be listed. + keep = 0: follow default behaviour + = 1: do not keep + = 2: keep only if safe-to-copy + = 3: keep even if unsafe-to-copy +*/ +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, + (png_structp png_ptr, int keep, + png_const_bytep chunk_list, int num_chunks)); +PNG_EXPORT(173, int, png_handle_as_unknown, (png_structp png_ptr, + png_const_bytep chunk_name)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_structp png_ptr, + png_infop info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_structp png_ptr, png_infop info_ptr, int chunk, int location)); +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structp png_ptr, + png_const_infop info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, + (png_structp png_ptr, png_infop info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +PNG_EXPORT(178, void, png_read_png, (png_structp png_ptr, png_infop info_ptr, + int transforms, png_voidp params)); +PNG_EXPORT(179, void, png_write_png, (png_structp png_ptr, png_infop info_ptr, + int transforms, png_voidp params)); +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, + (png_structp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structp png_ptr, png_const_infop info_ptr)); +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_structp png_ptr, png_const_infop info_ptr)); +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structp png_ptr, + png_const_infop info_ptr)); +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_structp png_ptr, png_const_infop info_ptr)); +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structp png_ptr, + png_const_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* PNG_pHYs_SUPPORTED */ +#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_structp png_ptr)); + +PNG_EXPORTA(200, png_const_bytep, png_get_io_chunk_name, + (png_structp png_ptr), PNG_DEPRECATED); +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* ?PNG_IO_STATE_SUPPORTED */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + (png_uint_16)128); \ + (composite) = (png_byte)((temp + (temp >> 8)) >> 8); } + +# define png_composite_16(composite, fg, alpha, bg) \ + { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(png_uint_32)(65535L \ + - (png_uint_32)(alpha)) + (png_uint_32)32768L); \ + (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + (png_uint_16)127) / 255) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535L - (png_uint_32)(alpha)) + \ + (png_uint_32)32767) / (png_uint_32)65535L) +#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_structp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define png_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define png_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define png_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \ + : (png_int_32)png_get_uint_32(buf))) +#endif + +/* Maintainer: Put new public prototypes here ^, in libpng.3, and project + * defs + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) Maintainer, remember to add an entry to + * scripts/symbols.def as well. + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(221); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/lib-x86-32/include/pngconf.h b/lib-x86-32/include/pngconf.h new file mode 100644 index 00000000..c82fa586 --- /dev/null +++ b/lib-x86-32/include/pngconf.h @@ -0,0 +1,649 @@ + +/* pngconf.h - machine configurable file for libpng + * + * libpng version 1.5.2 - March 31, 2011 + * + * Copyright (c) 1998-2011 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + */ + +/* Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* PNG_NO_LIMITS_H may be used to turn off the use of the standard C + * definition file for machine specific limits, this may impact the + * correctness of the definitons below (see uses of INT_MAX). + */ +# ifndef PNG_NO_LIMITS_H +# include +# endif + +/* For the memory copy APIs (i.e. the standard definitions of these), + * because this file defines png_memcpy and so on the base APIs must + * be defined here. + */ +# ifdef BSD +# include +# else +# include +# endif + +/* For png_FILE_p - this provides the standard definition of a + * FILE + */ +# ifdef PNG_STDIO_SUPPORTED +# include +# endif +#endif + +/* This controls optimization of the reading of 16 and 32 bit values + * from PNG files. It can be set on a per-app-file basis - it + * just changes whether a macro is used to the function is called. + * The library builder sets the default, if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro protects us against machines that don't have function + * prototypes (ie K&R style headers). If your compiler does not handle + * function prototypes, define this macro and use the included ansi2knr. + * I've always been able to use _NO_PROTO as the indicator, but you may + * need to drag the empty declaration out in front of here, or change the + * ifdef to suit your own needs. + */ +#ifndef PNGARG + +# ifdef OF /* zlib prototype munger */ +# define PNGARG(arglist) OF(arglist) +# else + +# ifdef _NO_PROTO +# define PNGARG(arglist) () +# else +# define PNGARG(arglist) arglist +# endif /* _NO_PROTO */ + +# endif /* OF */ + +#endif /* PNGARG */ + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows sytems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows/x86 systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if ( defined(_Windows) || defined(_WINDOWS) || defined(WIN32) ||\ + defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) ) &&\ + ( defined(_X86_) || defined(_X64_) || defined(_M_IX86) ||\ + defined(_M_X64) || defined(_M_IA64) ) + /* Windows system (DOS doesn't support DLLs) running on x86/x64. Includes + * builds under Cygwin or MinGW. Also includes Watcom builds but these need + * special treatment because they are not compatible with GCC or Visual C + * because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined (_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) + ERROR: PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows/x86 */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* The default for PNG_IMPEXP depends on whether the library is + * being built or used. + */ +#ifndef PNG_IMPEXP +# ifdef PNGLIB_BUILD + /* Building the library */ +# if (defined(DLL_EXPORT)/*from libtool*/ ||\ + defined(_WINDLL) || defined(_DLL) || defined(__DLL__) ||\ + defined(_USRDLL) ||\ + defined(PNG_BUILD_DLL)) && defined(PNG_DLL_EXPORT) + /* Building a DLL. */ +# define PNG_IMPEXP PNG_DLL_EXPORT +# endif /* DLL */ +# else + /* Using the library */ +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ +#ifndef PNG_EXPORTA + +# define PNG_EXPORTA(ordinal, type, name, args, attributes)\ + PNG_FUNCTION(PNG_EXPORT_TYPE(type),(PNGAPI name),PNGARG(args), \ + extern attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args)\ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) PNGARG(args) +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. + */ +# if defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# ifndef PNG_PTR_NORETURN + /* It's not enough to have the compiler be the correct compiler at + * this point - it's necessary for the library (which defines + * the type of the library longjmp) to also be the GNU library. + * This is because many systems use the GNU compiler with a + * non-GNU libc implementation. Min/GW headers are also compatible + * with GCC as well as uclibc, so it seems best to exclude known + * problem libcs here rather than just including known libcs. + * + * NOTE: this relies on the only use of PNG_PTR_NORETURN being with + * the system longjmp. If the same type is used elsewhere then this + * will need to be changed. + */ +# if !defined(__CYGWIN__) +# define PNG_PTR_NORETURN __attribute__((__noreturn__)) +# endif +# endif +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif + + /* This specifically protects structure members that should only be + * accessed from within the library, therefore should be empty during + * a library build. + */ +# ifndef PNGLIB_BUILD +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_DEPSTRUCT +# define PNG_DEPSTRUCT __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# endif /* PNGLIB_BUILD */ +# endif /* __GNUC__ */ + +# if defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_PTR_NORETURN +# define PNG_PTR_NORETURN /* not supported */ +# endif +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __declspec(restrict) +# endif + + /* This specifically protects structure members that should only be + * accessed from within the library, therefore should be empty during + * a library build. + */ +# ifndef PNGLIB_BUILD +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_DEPSTRUCT +# define PNG_DEPSTRUCT __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# endif /* PNGLIB_BUILD */ +# endif /* _MSC_VER */ +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_PTR_NORETURN +# define PNG_PTR_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_DEPSTRUCT +# define PNG_DEPSTRUCT /* Access to this struct member is deprecated */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args) +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args) +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +/* The following uses const char * instead of char * for error + * and warning message functions, so some compilers won't complain. + * If you do not want to use const, define PNG_NO_CONST here. + * + * This should not change how the APIs are called, so it can be done + * on a per-file basis in the application. + */ +#ifndef PNG_CONST +# ifndef PNG_NO_CONST +# define PNG_CONST const +# else +# define PNG_CONST +# endif +#endif + +/* Some typedefs to get us started. These should be safe on most of the + * common platforms. The typedefs should be at least as large as the + * numbers suggest (a png_uint_32 must be at least 32 bits long), but they + * don't have to be exactly that size. Some compilers dislike passing + * unsigned shorts as function parameters, so you may be better off using + * unsigned int for png_uint_16. + */ + +#if defined(INT_MAX) && (INT_MAX > 0x7ffffffeL) +typedef unsigned int png_uint_32; +typedef int png_int_32; +#else +typedef unsigned long png_uint_32; +typedef long png_int_32; +#endif +typedef unsigned short png_uint_16; +typedef short png_int_16; +typedef unsigned char png_byte; + +#ifdef PNG_NO_SIZE_T +typedef unsigned int png_size_t; +#else +typedef size_t png_size_t; +#endif +#define png_sizeof(x) (sizeof (x)) + +/* The following is needed for medium model support. It cannot be in the + * pngpriv.h header. Needs modification for other compilers besides + * MSC. Model independent support declares all arrays and pointers to be + * large using the far keyword. The zlib version used must also support + * model independent data. As of version zlib 1.0.4, the necessary changes + * have been made in zlib. The USE_FAR_KEYWORD define triggers other + * changes that are needed. (Tim Wegner) + */ + +/* Separate compiler dependencies (problem here is that zlib.h always + * defines FAR. (SJT) + */ +#ifdef __BORLANDC__ +# if defined(__LARGE__) || defined(__HUGE__) || defined(__COMPACT__) +# define LDATA 1 +# else +# define LDATA 0 +# endif + /* GRR: why is Cygwin in here? Cygwin is not Borland C... */ +# if !defined(__WIN32__) && !defined(__FLAT__) && !defined(__CYGWIN__) +# define PNG_MAX_MALLOC_64K /* only used in build */ +# if (LDATA != 1) +# ifndef FAR +# define FAR __far +# endif +# define USE_FAR_KEYWORD +# endif /* LDATA != 1 */ + /* Possibly useful for moving data out of default segment. + * Uncomment it if you want. Could also define FARDATA as + * const if your compiler supports it. (SJT) +# define FARDATA FAR + */ +# endif /* __WIN32__, __FLAT__, __CYGWIN__ */ +#endif /* __BORLANDC__ */ + + +/* Suggest testing for specific compiler first before testing for + * FAR. The Watcom compiler defines both __MEDIUM__ and M_I86MM, + * making reliance oncertain keywords suspect. (SJT) + */ + +/* MSC Medium model */ +#ifdef FAR +# ifdef M_I86MM +# define USE_FAR_KEYWORD +# define FARDATA FAR +# include +# endif +#endif + +/* SJT: default case */ +#ifndef FAR +# define FAR +#endif + +/* At this point FAR is always defined */ +#ifndef FARDATA +# define FARDATA +#endif + +/* Typedef for floating-point numbers that are converted + * to fixed-point with a multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void FAR * png_voidp; +typedef PNG_CONST void FAR * png_const_voidp; +typedef png_byte FAR * png_bytep; +typedef PNG_CONST png_byte FAR * png_const_bytep; +typedef png_uint_32 FAR * png_uint_32p; +typedef PNG_CONST png_uint_32 FAR * png_const_uint_32p; +typedef png_int_32 FAR * png_int_32p; +typedef PNG_CONST png_int_32 FAR * png_const_int_32p; +typedef png_uint_16 FAR * png_uint_16p; +typedef PNG_CONST png_uint_16 FAR * png_const_uint_16p; +typedef png_int_16 FAR * png_int_16p; +typedef PNG_CONST png_int_16 FAR * png_const_int_16p; +typedef char FAR * png_charp; +typedef PNG_CONST char FAR * png_const_charp; +typedef png_fixed_point FAR * png_fixed_point_p; +typedef PNG_CONST png_fixed_point FAR * png_const_fixed_point_p; +typedef png_size_t FAR * png_size_tp; +typedef PNG_CONST png_size_t FAR * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double FAR * png_doublep; +typedef PNG_CONST double FAR * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte FAR * FAR * png_bytepp; +typedef png_uint_32 FAR * FAR * png_uint_32pp; +typedef png_int_32 FAR * FAR * png_int_32pp; +typedef png_uint_16 FAR * FAR * png_uint_16pp; +typedef png_int_16 FAR * FAR * png_int_16pp; +typedef PNG_CONST char FAR * FAR * png_const_charpp; +typedef char FAR * FAR * png_charpp; +typedef png_fixed_point FAR * FAR * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double FAR * FAR * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char FAR * FAR * FAR * png_charppp; + +/* png_alloc_size_t is guaranteed to be no smaller than png_size_t, + * and no smaller than png_uint_32. Casts from png_size_t or png_uint_32 + * to png_alloc_size_t are not necessary; in fact, it is recommended + * not to use them at all so that the compiler can complain when something + * turns out to be problematic. + * Casts in the other direction (from png_alloc_size_t to png_size_t or + * png_uint_32) should be explicitly applied; however, we do not expect + * to encounter practical situations that require such conversions. + */ +#if defined(__TURBOC__) && !defined(__FLAT__) + typedef unsigned long png_alloc_size_t; +#else +# if defined(_MSC_VER) && defined(MAXSEG_64K) + typedef unsigned long png_alloc_size_t; +# else + /* This is an attempt to detect an old Windows system where (int) is + * actually 16 bits, in that case png_malloc must have an argument with a + * bigger size to accomodate the requirements of the library. + */ +# if (defined(_Windows) || defined(_WINDOWS) || defined(_WINDOWS_)) && \ + (!defined(INT_MAX) || INT_MAX <= 0x7ffffffeL) + typedef DWORD png_alloc_size_t; +# else + typedef png_size_t png_alloc_size_t; +# endif +# endif +#endif + +#endif /* PNGCONF_H */ diff --git a/lib-x86-32/libjpeg.a b/lib-x86-32/libjpeg.a new file mode 100644 index 00000000..ed8baf7c Binary files /dev/null and b/lib-x86-32/libjpeg.a differ diff --git a/lib-x86-32/libpng15.a b/lib-x86-32/libpng15.a new file mode 100644 index 00000000..ce09367f Binary files /dev/null and b/lib-x86-32/libpng15.a differ -- cgit v1.2.3