Draft Dafny Reference Manual
Manuscript Dafny Reference
2016-01-27 21:22
Richard L. Ford
K. Rustan M. Leino

Abstract. This is the Dafny reference manual which describes the Dafny programming language and how to use the Dafny verification system. Parts of this manual are more tutorial in nature in order to help the user understand how to do proofs with Dafny.

0. Introduction

Dafny [18] is a programming language with built-in specification constructs. The Dafny static program verifier can be used to verify the functional correctness of programs.

The Dafny programming language is designed to support the static verification of programs. It is imperative, sequential, supports generic classes, methods and functions, dynamic allocation, inductive and co-inductive datatypes, and specification constructs. The specifications include pre- and postconditions, frame specifications (read and write sets), and termination metrics. To further support specifications, the language also offers updatable ghost variables, recursive functions, and types like sets and sequences. Specifications and ghost constructs are used only during verification; the compiler omits them from the executable code.

The Dafny verifier is run as part of the compiler. As such, a programmer interacts with it much in the same way as with the static type checker—when the tool produces errors, the programmer responds by changing the program’s type declarations, specifications, and statements.

The easiest way to try out Dafny is in your web browser at rise4fun[15]. Once you get a bit more serious, you may prefer to download it to run it on your machine. Although Dafny can be run from the command line (on Windows or other platforms), the preferred way to run it is in Microsoft Visual Studio 2012 (or newer) or using emacs, where the Dafny verifier runs in the background while the programmer is editing the program.

The Dafny verifier is powered by Boogie [0, 16, 23] and Z3[4].

From verified programs, the Dafny compiler produces code (.dll or .exe) for the .NET platform via intermediate C# files. However, the facilities for interfacing with other .NET code are minimal.

This is the reference manual for the Dafny verification system. It is based on the following references: [5, 1315, 18, 20, 22]

The main part of the reference manual is in top down order except for an initial section that deals with the lowest level constructs.

0.0. Dafny Example

To give a flavor of Dafny, here is the solution to a competition problem.

// VSComp 2010, problem 3, find a 0 in a linked list and return how many
// nodes were skipped until the first 0 (or end-of-list) was found.
// Rustan Leino, 18 August 2010.
// 
// The difficulty in this problem lies in specifying what the return
// value 'r' denotes and in proving that the program terminates.  Both of
// these are addressed by declaring a ghost field 'List' in each
// linked-list node, abstractly representing the linked-list elements
// from the node to the end of the linked list.  The specification can
// now talk about that sequence of elements and can use 'r' as an index
// into the sequence, and termination can be proved from the fact that
// all sequences in Dafny are finite.
// 
// We only want to deal with linked lists whose 'List' field is properly
// filled in (which can only happen in an acyclic list, for example).  To
// that avail, the standard idiom in Dafny is to declare a predicate
// 'Valid()' that is true of an object when the data structure
// representing object's abstract value is properly formed.  The
// definition of 'Valid()' is what one intuitively would think of as the
// ''object invariant'', and it is mentioned explicitly in method pre-
// and postconditions.  As part of this standard idiom, one also declared
// a ghost variable 'Repr' that is maintained as the set of objects that
// make up the representation of the aggregate object--in this case, the
// Node itself and all its successors.

class Node {
  ghost var List: seq<int>
  ghost var Repr: set<Node>
  var head: int
  var next: Node

  predicate Valid()
    reads this, Repr
  {
    this in Repr &&
    1 <= |List| && List[0] == head &&
    (next == null ==> |List| == 1) &&
    (next != null ==>
      next in Repr && next.Repr <= Repr && this !in next.Repr && 
      next.Valid() && next.List == List[1..])
  }

  static method Cons(x: int, tail: Node) returns (n: Node)
    requires tail == null || tail.Valid()
    ensures n != null && n.Valid()
    ensures if tail == null then n.List == [x] 
                            else n.List == [x] + tail.List
  {
    n := new Node;
    n.head, n.next := x, tail;
    if (tail == null) {
      n.List := [x];
      n.Repr := {n};
    } else {
      n.List := [x] + tail.List;
      n.Repr := {n} + tail.Repr;
    }
  }
}

method Search(ll: Node) returns (r: int)
  requires ll == null || ll.Valid()
  ensures ll == null ==> r == 0
  ensures ll != null ==>
            0 <= r && r <= |ll.List| &&
            (r < |ll.List| ==> ll.List[r] == 0 && 0 !in ll.List[..r]) &&
            (r == |ll.List| ==> 0 !in ll.List)
{
  if (ll == null) {
    r := 0;
  } else {
    var jj,i := ll,0;
    while (jj != null && jj.head != 0)
      invariant jj != null ==> jj.Valid() && i + |jj.List| == |ll.List| && 
                               ll.List[i..] == jj.List
      invariant jj == null ==> i == |ll.List|
      invariant 0 !in ll.List[..i]
      decreases |ll.List| - i
    {
      jj := jj.next;
      i := i + 1;
    }
    r := i;
  }
}

method Main()
{
  var list: Node := null;
  list := list.Cons(0, list);
  list := list.Cons(5, list);
  list := list.Cons(0, list);
  list := list.Cons(8, list);
  var r := Search(list);
  print "Search returns ", r, "\n";
  assert r == 1;
}

1. Lexical and Low Level Grammar

Dafny uses the Coco/R lexer and parser generator for its lexer and parser (http://www.ssw.uni-linz.ac.at/Research/Projects/Coco)[27]. The Dafny input file to Coco/R is the Dafny.atg file in the source tree. A Coco/R input file consists of code written in the target language (e.g. C#) intermixed with these special sections:

  1. The Characters section which defines classes of characters that are used in defining the lexer (Section 1.0).
  2. The Tokens section which defines the lexical tokens (Section 1.1).
  3. The Productions section which defines the grammar. The grammar productions are distributed in the later parts of this document in the parts where those constructs are explained.

The grammar presented in this document was derived from the Dafny.atg file but has been simplified by removing details that, though needed by the parser, are not needed to understand the grammar. In particular, the following transformation have been performed.

The names of character sets and tokens start with a lower case letter but the names of grammar non-terminals start with an upper-case letter.

The grammar uses Extended BNF notation. See the Coco/R Referenced manual for details. But in summary:

In addition to the Coco rules, for the sake of readability we have adopted these additional conventions.

For the convenience of the reader, any references to character sets, tokens, or grammar non-terminals in this document are hyper-links that will link to the definition of the entity.

1.0. Character Classes

This section defines character classes used later in the token definitions. In this section backslash is used to start an escape sequence, so for example ‘\n’ denotes the single linefeed character.

letter = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"

At present, a letter is an ASCII upper or lowercase letter. Other Unicode letters are not supported.

digit = "0123456789"

A digit is just one of the base-10 digits.

posDigit = "123456789"

A posDigit is a digit, excluding 0.

hexdigit = "0123456789ABCDEFabcdef"

A hexdigit character is a digit or one of the letters from ‘A’ to ‘F’ in either case.

special = "'_?"

The special characters are the characters in addition to alphanumeric characters that are allowed to appear in a Dafny identifier. These are

cr        = '\r'

A carriage return character.

lf        = '\n'

A line feed character.

tab       = '\t'

A tab character.

space = ' '

A space character.

nondigitIdChar = letter + special

The characters that can be used in an identifier minus the digits.

idchar = nondigitIdChar + digit

The characters that can be used in an identifier.

nonidchar = ANY - idchar

Any character except those that can be used in an identifier.

charChar = ANY - '\'' - '\\' - cr - lf

Characters that can appear in a character constant.

stringChar = ANY - '"' - '\\' - cr - lf

Characters that can appear in a string constant.

verbatimStringChar = ANY - '"'

Characters that can appear in a verbatim string.

1.0.0. Comments

Comments are in two forms.

1.1. Tokens

As with most languages, Dafny syntax is defined in two levels. First the stream of input characters is broken up into tokens. Then these tokens are parsed using the Dafny grammar. The Dafny tokens are defined in this section.

1.1.0. Reserved Words

The following reserved words appear in the Dafny grammar and may not be used as identifiers of user-defined entities:

reservedword = 
    "abstract" | "array" | "as" | "assert" | "assume" | "bool" | "break" |
    "calc" | "case" | "char" | "class" | "codatatype" | "colemma" |
    "constructor" | "copredicate" | "datatype" | "decreases" |
    "default" | "else" | "ensures" | "exists" | "extends" | "false" |
    "forall" | "free" | "fresh" | "function" | "ghost" | "if" | "imap" | "import" |
    "in" | "include" | "inductive" | "int" | "invariant" | "iset" | "iterator" | "label" |
    "lemma" | "map" | "match" | "method" | "modifies" | "modify" |
    "module" | "multiset" | "nat" | "new" | "newtype" | "null" | "object" |
    "old" | "opened" | "predicate" | "print" | "protected" |
    "reads" | "real" | "refines" | "requires" | "return" | "returns" | "seq" |
    "set" | "static" | "string" | "then" | "this" | "trait" | "true" | "type" |
    "var" | "where" | "while" | "yield" | "yields" | arrayToken

arrayToken = "array" [ posDigit { digit }]

An arrayToken is a reserved word that denotes an array type of given rank. array is an array type of rank 1 (aka a vector). array2 is the type of two-dimensional arrays, etc.

TODO: Is “_” is reserved word?

1.1.1. Identifiers

ident = nondigitIdChar { idchar } - arraytoken - chartoken - reservedword 

In general Dafny identifiers are sequences of idChar characters where the first character is a nondigitIdChar. However tokens that fit this pattern are not identifiers if they look like an array type token, a character literal, or a reserved work.

1.1.2. Digits

digits = digit {['_'] digit}

A sequence of decimal digits, possibly interspersed with underscores for readability. Example: 1_234_567.

hexdigits = "0x" hexdigit {['_'] hexdigit}

A hexadecimal constant, possibly interspersed with underscores for readability. Example: 0xffff_ffff.

decimaldigits = digit {['_'] digit} '.' digit {['_'] digit}

A decimal fraction constant, possibly interspersed with underscores for readability. Example: 123_456.789_123.

1.1.3. Escaped Character

In this section the “\” characters are literal.

escapedChar =
    ( "\'" | "\"" | "\\" | "\0" | "\n" | "\r" | "\t"
      | "\u" hexdigit hexdigit hexdigit hexdigit
    )

In Dafny character or string literals escaped characters may be used to specify the presence of the delimiting quote, or back slash, or null, or new line, or carriage return or tab, or the Unicode character with given hexadecimal representation.

1.1.4. Character Constant Token

charToken = "'" ( charChar | escapedChar ) "'" 

A character constant is enclosed by “'” and includes either a character from the charChar set, or an escaped character. Note that although Unicode letters are not allowed in Dafny identifiers, Dafny does support Unicode in its character and string constants and in its data. A character constant has type char.

1.1.5. String Constant Token

stringToken =
    '"' { stringChar | escapedChar }  '"'
  | '@' '"' { verbatimStringChar | '"' '"' } '"'

A string constant is either a normal string constant or a verbatim string constant. A normal string constant is enclosed by ‘"’ and can contain characters from the stringChar set and escapes.

A verbatim string constant is enclosed between ‘@"’ and ‘"’ and can consists of any characters (including newline characters) except that two successive double quotes give a way to escape one quote character inside the string.

1.2. Low Level Grammar Productions

1.2.0. Identifier Variations

Ident = ident 

The Ident non-terminal is just an ident token and represents an ordinary identifier.

DotSuffix = 
  ( ident | digits | "requires" | "reads" ) 

When using the dot notation to denote a component of a compound entity the token following the “.”, in addition to being an identifier, can also be a natural number, or one of the keywords requires or reads.

NoUSIdent = ident - "_" { idChar }

A NoUSIdent is an identifier except that identifiers with a leading underscore are not allowed. The names of user-defined entities are required to be NoUSIdents. We introduce more mnemonic names for these below (e.g. ClassName).

WildIdent = NoUSIdent | "_" 

Identifier, disallowing leading underscores, except the “wildcard” identifier “_”. When “_” appears it is replaced by a unique generated identifier distinct from user identifiers.

1.2.1. NoUSIdent Synonyms

In the productions for the declaration of user-defined entities the name of the user-defined entity is required to be an identifier that does not start with an underscore, i.e., a NoUSIdent. To make the productions more mnemonic, we introduce the following synonyms for NoUSIdent.

ModuleName = NoUSIdent 
ClassName = NoUSIdent 
TraitName = NoUSIdent 
DatatypeName = NoUSIdent 
DatatypeMemberName = NoUSIdent 
NewtypeName = NoUSIdent 
NumericTypeName = NoUSIdent 
SynonymTypeName = NoUSIdent 
IteratorName = NoUSIdent 
TypeVariableName = NoUSIdent 
MethodName = NoUSIdent 
FunctionName = NoUSIdent 
PredicateName = NoUSIdent 
CopredicateName = NoUSIdent 
LabelName = NoUSIdent
AttributeName = NoUSIdent
FieldIdent = NoUSIdent 

A FieldIdent is one of the ways to identify a field. The other is using digits.

1.2.2. Qualified Names

A qualified name starts with the name of the top-level entity and then is followed by zero or more DotSuffixs which denote a component. Examples:

The grammar does not actually have a production for qualified names except in the special case of a qualified name that is known to be a module name, i.e. a QualifiedModuleName.

1.2.3. Identifier-Type Combinations

In this section, we describe some nonterminals that combine an identifier and a type.

IdentType = WildIdent ":" Type

In Dafny, a variable or field is typically declared by giving its name followed by a colon and its type. An IdentType is such a construct.

GIdentType(allowGhostKeyword) = [ "ghost" ] IdentType

A GIdentType is a typed entity declaration optionally preceded by “ghost”. The ghost qualifier means the entity is only used during verification but not in the generated code. Ghost variables are useful for abstractly representing internal state in specifications. If allowGhostKeyword is false then “ghost” is not allowed.

LocalIdentTypeOptional = WildIdent [ ":" Type ] 

A LocalIdentTypeOptional is used when declaring local variables. In such a case a value may be specified for the variable in which case the type may be omitted because it can be inferred from the initial value. The initial value value may also be omitted.

IdentTypeOptional = WildIdent [ ":" Type ] 

A IdentTypeOptional is typically used in a context where the type of the identifier may be inferred from the context. Examples are in pattern matching or quantifiers.

TypeIdentOptional = [ "ghost" ] ( NoUSIdent | digits ) ":" ] Type

TypeIdentOptionals are used in FormalsOptionalIds. This represents situations where a type is given but there may not be an identifier.

FormalsOptionalIds = "(" [TypeIdentOptional  { "," TypeIdentOptional } ] ")" 

A FormalsOptionalIds is a formal parameter list in which the types are required but the names of the parameters is optional. This is used in algebraic datatype definitions.

1.2.4. Numeric Literals

Nat = ( digits | hexdigits ) 

A Nat represents a natural number expressed in either decimal or hexadecimal.

Dec = (decimaldigits ) 

A Dec represents a decimal fraction literal.

2. Programs

Dafny = { IncludeDirective_ } { TopDecl } EOF 

At the top level, a Dafny program (stored as files with extension .dfy) is a set of declarations. The declarations introduce (module-level) methods and functions, as well as types (classes, traits, inductive and co-inductive datatypes, new_types, type synonyms, opaque types, and iterators) and modules, where the order of introduction is irrelevant. A class also contains a set of declarations, introducing fields, methods, and functions.

When asked to compile a program, Dafny looks for the existence of a Main() method. If a legal Main() method is found, the compiler will emit a .EXE; otherwise, it will emit a .DLL.

(If there is more than one Main(), Dafny will try to emit an .EXE, but this may cause the C# compiler to complain. One could imagine improving this functionality so that Dafny will produce a polite error message in this case.)

In order to be a legal Main() method, the following must be true:

Note, however, that the following are allowed:

An invocation of Dafny may specify a number of source files. Each Dafny file follows the grammar of the Dafny non-terminal.

It consists of a sequence of optional include directives followed by top level declarations followed by the end of the file.

2.0. Include Directives

IncludeDirective_ = "include" stringToken  

Include directives have the form "include" stringToken where the string token is either a normal string token or a verbatim string token. The stringToken is interpreted as the name of a file that will be included in the Dafny source. These included files also obey the Dafny grammar. Dafny parses and processes the transitive closure of the original source files and all the included files, but will not invoke the verifier on these unless they have been listed explicitly on the command line.

2.1. Top Level Declarations

TopDecl = { { DeclModifier }
  ( SubModuleDecl
  | ClassDecl
  | DatatypeDecl
  | NewtypeDecl
  | SynonymTypeDecl
  | IteratorDecl
  | TraitDecl
  | ClassMemberDecl(moduleLevelDecl: true)
  } 

Top-level declarations may appear either at the top level of a Dafny file, or within a SubModuleDecl. A top-level declaration is one of the following types of declarations which are described later.

The ClassDecl, DatatypeDecl, NewtypeDecl, SynonymTypeDecl, IteratorDecl, and TraitDecl declarations are type declarations and are describe in Section 5. Ordinarily ClassMemberDecls appear in class declarations but they can also appear at the top level. In that case they are included as part of an implicit top-level class and are implicitly static (but cannot be declared as static). In addition a ClassMemberDecl that appears at the top level cannot be a FieldDecl.

2.2. Declaration Modifiers

DeclModifier =
  ( "abstract" | "ghost" | "static" | "protected"
  | "extern" [ stringToken]
  )

Top level declarations may be preceded by zero or more declaration modifiers. Not all of these are allowed in all contexts.

The “abstract” modifiers may only be used for module declarations. An abstract module can leave some entities underspecified. Abstract modules are not compiled to C#.

The ghost modifier is used to mark entities as being used for specification only, not for compilation to code.

The static modifier is used for class members that that are associated with the class as a whole rather than with an instance of the class.

The protected modifier is used to control the visibility of the body of functions.

The extern modifier is used to alter the CompileName of entities. The CompileName is the name for the entity when translating to Boogie or C#.

The following table shows modifiers that are available for each of the kinds of declaration. In the table we use already-ghost to denote that the item is not allowed to have the ghost modifier because it is already implicitly ghost.

Declaration allowed modifiers
module abstract
class extern
trait -
datatype or codatatype -
field ghost
newtype -
synonym types -
iterators -
method ghost static extern
lemma, colemma, comethod already-ghost static protected
inductive lemma already-ghost static
constructor -
function (non-method) already-ghost static protected
function method already-ghost static protected extern
predicate (non-method) already-ghost static protected
predicate method already-ghost static protected extern
inductive predicate already-ghost static protected
copredicate already-ghost static protected

3. Modules

SubModuleDecl = ( ModuleDefinition_ | ModuleImport_ ) 

Structuring a program by breaking it into parts is an important part of creating large programs. In Dafny, this is accomplished via modules. Modules provide a way to group together related types, classes, methods, functions, and other modules together, as well as control the scope of declarations. Modules may import each other for code reuse, and it is possible to abstract over modules to separate an implementation from an interface.

3.0. Declaring New Modules

ModuleDefinition_ = "module" { Attribute } ModuleName 
        [ [  "exclusively" ] "refines" QualifiedModuleName ] 
        "{" { TopDecl } "}" 
QualifiedModuleName = Ident { "." Ident } 

A qualified name that is known to refer to a module.

A new module is declared with the module keyword, followed by the name of the new module, and a pair of curly braces ({}) enclosing the body of the module:

module Mod {
  ...
}

A module body can consist of anything that you could put at the top level. This includes classes, datatypes, types, methods, functions, etc.

module Mod {
  class C {
    var f: int
    method m() 
  }
  datatype Option = A(int) | B(int)
  type T
  method m()
  function f(): int
}

You can also put a module inside another, in a nested fashion:

module Mod {
  module Helpers {
    class C {
      method doIt()
      var f: int
    }
  }
}

Then you can refer to the members of the Helpers module within the Mod module by prefixing them with “Helpers.”. For example:

module Mod {
  module Helpers { ... }
  method m() {
    var x := new Helpers.C;
    x.doIt();
    x.f := 4;
  }
}

Methods and functions defined at the module level are available like classes, with just the module name prefixing them. They are also available in the methods and functions of the classes in the same module.

module Mod {
  module Helpers {
    function method addOne(n: nat): nat {
      n + 1
    }
  }
  method m() {
    var x := 5;
    x := Helpers.addOne(x); // x is now 6
  }
}

3.1. Importing Modules

ModuleImport_ = "import" ["opened" ] ModuleName
    [ "=" QualifiedModuleName 
    | "as" QualifiedModuleName ["default" QualifiedModuleName ] 
    ]
    [ ";" ] 

Declaring new submodules is useful, but sometimes you want to refer to things from an existing module, such as a library. In this case, you can import one module into another. This is done via the import keyword, and there are a few different forms, each of which has a different meaning. The simplest kind is the concrete import, and has the form import A = B. This declaration creates a reference to the module B (which must already exist), and binds it to the new name A. Note this new name, i.e. A, is only bound in the module containing the import declaration; it does not create a global alias. For example, if Helpers was defined outside of Mod, then we could import it:

module Helpers {
  ...
}
module Mod {
  import A = Helpers
  method m() {
    assert A.addOne(5) == 6;
  }
}

Note that inside m(), we have to use A instead of Helpers, as we bound it to a different name. The name Helpers is not available inside m(), as only names that have been bound inside Mod are available. In order to use the members from another module, it either has to be declared there with module or imported with import.

We don't have to give Helpers a new name, though, if we don't want to. We can write import Helpers = Helpers if we want to, and Dafny even provides the shorthand import Helpers for this behavior. You can't bind two modules with the same name at the same time, so sometimes you have to use the = version to ensure the names do not clash.

The QualifiedModuleName in the ModuleImport_ starts with a sibling module of the importing module, or with a submodule of the importing module. There is no wya to refer to the parent module, only sibling modules (and their submodules).

3.2. Opening Modules

Sometimes, prefixing the members of the module you imported with the name is tedious and ugly, even if you select a short name when importing it. In this case, you can import the module as opened, which causes all of its members to be available without adding the module name. The opened keyword must immediately follow import, if it is present. For example, we could write the previous example as:

module Mod {
  import opened Helpers
  method m() {
    assert addOne(5) == 6;
  }
}

When opening modules, the newly bound members will have low priority, so they will be hidden by local definitions. This means if you define a local function called addOne, the function from Helpers will no longer be available under that name. When modules are opened, the original name binding is still present however, so you can always use the name that was bound to get to anything that is hidden.

module Mod {
  import opened Helpers
  function addOne(n: nat): nat {
    n - 1
  }
  method m() {
    assert addOne(5) == 6; // this is now false,
                           // as this is the function just defined
    assert Helpers.addOne(5) == 6; // this is still true
  }
}

If you open two modules that both declare members with the same name, then neither member can be referred to without a module prefix, as it would be ambiguous which one was meant. Just opening the two modules is not an error, however, as long as you don't attempt to use members with common names. The opened keyword can be used with any kind of import declaration, including the module abstraction form.

3.3. Module Abstraction

Sometimes, using a specific implementation is unnecessary; instead, all that is needed is a module that implements some interface. In that case, you can use an abstract module import. In Dafny, this is written import A as B. This means bind the name A as before, but instead of getting the exact module B, you get any module which is a adheres of B. Typically, the module B may have abstract type definitions, classes with bodyless methods, or otherwise be unsuitable to use directly. Because of the way refinement is defined, any refinement of B can be used safely. For example, if we start with:

module Interface {
  function method addSome(n: nat): nat
    ensures addSome(n) > n
}
module Mod {
  import A as Interface
  method m() {
    assert 6 <= A.addSome(5);
  }
}

then we can be more precise if we know that addSome actually adds exactly one. The following module has this behavior. Further, the postcondition is stronger, so this is actually a refinement of the Interface module.

module Implementation {
  function method addSome(n: nat): nat
    ensures addSome(n) == n + 1
  {
    n + 1
  }
}

We can then substitute Implementation for A in a new module, by declaring a refinement of Mod which defines A to be Implementation.

module Mod2 refines Mod {
  import A = Implementation
  ...
}

You can also give an implementation directly, without introducing a refinement, by giving a default to the abstract import:

module Interface {
  function method addSome(n: nat): nat 
    ensures addSome(n) > n
}
module Mod {
  import A as Interface default Implementation
  method m() {
    assert 6 <= A.addSome(5);
  }
}
module Implementation {
  function method addSome(n: nat): nat 
    ensures addSome(n) == n + 1
  {
    n + 1
  }
}
module Mod2 refines Mod {
  import A as Interface default Implementation
  ...
}

Regardless of whether there is a default, the only things known about A in this example is that it has a function addSome that returns a strictly bigger result, so even with the default we still can't prove that A.addSome(5) == 6, only that 6 <= A.addSome(5).

When you refine an abstract import into a concrete one, or giving a default, Dafny checkes that the concrete module is a refinement of the abstract one. This means that the methods must have compatible signatures, all the classes and datatypes with their constructors and fields in the abstract one must be present in the concrete one, the specifications must be compatible, etc.

3.4. Module Ordering and Dependencies

Dafny isn't particular about which order the modules appear in, but they must follow some rules to be well formed. As a rule of thumb, there should be a way to order the modules in a program such that each only refers to things defined before it in the source text. That doesn't mean the modules have to be given in that order. Dafny will figure out that order for you, assuming you haven't made any circular references. For example, this is pretty clearly meaningless:

import A = B
import B = A

You can have import statements at the toplevel, and you can import modules defined at the same level:

import A = B
method m() {
  A.whatever();
}
module B { ... }

In this case, everything is well defined because we can put B first, followed by the A import, and then finally m(). If there is no ordering, then Dafny will give an error, complaining about a cyclic dependency.

Note that when rearranging modules and imports, they have to be kept in the same containing module, which disallows some pathological module structures. Also, the imports and submodules are always considered to be first, even at the toplevel. This means that the following is not well formed:

method doIt() { }
module M {
  method m() {
    doIt();
  }
}

because the module M must come before any other kind of members, such as methods. To define global functions like this, you can put them in a module (called Globals, say) and open it into any module that needs its functionality. Finally, if you import via a path, such as import A = B.C, then this creates a dependency of A on B, as we need to know what B is (is it abstract or concrete, or a refinement?).

3.5. Name Resolution

When Dafny sees something like A<T>.B<U>.C<V>, how does it know what each part refers to? The process Dafny uses to determine what identifier sequences like this refer to is name resolution. Though the rules may seem complex, usually they do what you would expect. Dafny first looks up the initial identifier. Depending on what the first identifier refers to, the rest of the identifier is looked up in the appropriate context.

In terms of the grammar, sequences like the above are represented as a NameSegment followed by 0 or more Suffixes. A Suffix is more general and the form shown above would be for when the Suffix is an AugmentedDotSuffix_.

The resolution is different depending on whether it is in an expression context or a type context.

3.5.0. Expression Context Name Resolution

The leading NameSegment is resolved using the first following rule that succeeds.

  1. Local variables, parameters and bound variables. These are things like x, y, and i in var x;, ... returns (y: int), and forall i :: .... The declaration chosen is the match from the innermost matching scope.

  2. If in a class, try to match a member of the class. If the member that is found is not static an implicit this is inserted. This works for fields, functions, and methods of the current class (if in a static context, then only static methods and functions are allowed). You can refer to fields of the current class either as this.f or f, assuming of course that f hasn't be hidden by one of the above. You can always prefix this if needed, which cannot be hidden. (Note, a field whose name is a string of digits must always have some prefix.)

  3. If there is no Suffix, then look for a datatype constructor, if unambiguous. Any datatypes that don't need qualification (so the datatype name itself doesn't need a prefix), and also have a uniquely named constructor, can be referred to just by its name. So if datatype List = Cons(List) | Nil is the only datatype that declares Cons and Nil constructors, then you can write Cons(Cons(Nil)). If the constructor name is not unique, then you need to prefix it with the name of the datatype (for example List.Cons(List.Nil))). This is done per constructor, not per datatype.

  4. Look for a member of the enclosing module.

  5. Module-level (static) functions and methods

TODO: Not sure about the following paragraph. Opened modules are treated at each level, after the declarations in the current module. Opened modules only affect steps 2, 3 and 5. If a ambiguous name is found, an error is generated, rather than continuing down the list. After the first identifier, the rules are basically the same, except in the new context. For example, if the first identifier is a module, then the next identifier looks into that module. Opened modules only apply within the module it is opened into. When looking up into another module, only things explicitly declared in that module are considered.

To resolve expression E.id:

First resolve expression E and any type arguments.

3.5.1. Type Context Name Resolution

In a type context the priority of NameSegment resolution is:

  1. Type parameters.

  2. Member of enclosing module (type name or the name of a module).

To resolve expression E.id:

4. Specifications

Specifications describe logical properties of Dafny methods, functions, lambdas, iterators and loops. They specify preconditions, postconditions, invariants, what memory locations may be read or modified, and termination information by means of specification clauses. For each kind of specification zero or more specification clauses (of the type accepted for that type of specification) may be given, in any order.

We document specifications at these levels:

This section documents the first two of these in a bottom-up manner. We first document the clauses and then the specifications that use them.

4.0. Specification Clauses

4.0.0. Requires Clause

RequiresClause_ = 
    "requires" Expression(allowLemma: false, allowLambda: false)

The requires clauses specify preconditions for methods, functions, lambda expressions and iterators. Dafny checks that the preconditions are met at all call sites. The callee may then assume the preconditions hold on entry.

If no requires clause is specified it is taken to be true.

If more than one requires clause is given, then the precondition is the conjunction of all of the expressions from all of the requires clauses.

4.0.1. Ensures Clause

EnsuresClause_ = 
    "ensures" { Attribute } Expression(allowLemma: false, allowLambda: false)
ForAllEnsuresClause_ = 
    "ensures" Expression(allowLemma: false, allowLambda: true)
FunctionEnsuresClause_ = 
    "ensures" Expression(allowLemma: false, allowLambda: false)

An ensures clause specifies the post condition for a method, function or iterator.

If no ensures clause is specified it is taken to be true.

If more than one ensures clause is given, then the postcondition is the conjunction of all of the expressions from all of the ensures clauses.

TODO: In the present sources FunctionEnsuresClause_ differs from EnsuresClause_ only in that it is not allowed to specify Attributes. This seems like a bug and will likely be fixed in a future version.

4.0.2. Decreases Clause

DecreasesClause_(allowWildcard, allowLambda) = 
    "decreases" { Attribute } DecreasesList(allowWildcard, allowLambda)
FunctionDecreasesClause_(allowWildcard, allowLambda) =
    "decreases" DecreasesList(allowWildcard, allowLambda)
DecreasesList(allowWildcard, allowLambda) = 
  PossiblyWildExpression(allowLambda) 
  { "," PossiblyWildExpression(allowLambda) } 

If allowWildcard is false but one of the PossiblyWildExpressions is a wild-card, an error is reported.

TODO: A FunctionDecreasesClause_ is not allowed to specify Attributes. this will be fixed in a future version.

Decreases clauses are used to prove termination in the presence of recursion. if more than one decreases clause is given it is as if a single decreases clause had been given with the collected list of arguments. That is,

decreases A, B
decreases C, D

is equivalent to

decreases A, B, C, D

If any of the expressions in the decreases clause are wild (i.e. “*”) then proof of termination will be skipped.

Termination metrics in Dafny, which are declared by decreases clauses, are lexicographic tuples of expressions. At each recursive (or mutually recursive) call to a function or method, Dafny checks that the effective decreases clause of the callee is strictly smaller than the effective decreases clause of the caller.

What does “strictly smaller” mean? Dafny provides a built-in well-founded order for every type and, in some cases, between types. For example, the Boolean “false” is strictly smaller than “true”, the integer 78 is strictly smaller than 102, the set {2,5} is strictly smaller than the set {2,3,5}, and for “s” of type seq<Color> where Color is some inductive datatype, the color s[0] is strictly less than s (provided s is nonempty).

What does “effective decreases clause” mean? Dafny always appends a “top” element to the lexicographic tuple given by the user. This top element cannot be syntactically denoted in a Dafny program and it never occurs as a run-time value either. Rather, it is a fictitious value, which here we will denote \top, such that each value that can ever occur in a Dafny program is strictly less than \top. Dafny sometimes also prepends expressions to the lexicographic tuple given by the user. The effective decreases clause is any such prefix, followed by the user-provided decreases clause, followed by \top. We said “user-provided decreases clause”, but if the user completely omits a “decreases” clause, then Dafny will usually make a guess at one, in which case the effective decreases clause is any prefix followed by the guess followed by \top. (If you're using the Dafny IDE in Visual Studio, you can hover the mouse over the name of a recursive function or method, or the “while” keyword for a loop, to see the “decreases” clause that Dafny guessed, if any.)

Here is a simple but interesting example: the Fibonacci function.

function Fib(n: nat) : nat
{
  if n < 2 then n else Fib(n-2) + Fib(n-1)
}

In this example, if you hover your mouse over the function name you will see that Dafny has supplied a **decreases** n clause.

Let's take a look at the kind of example where a mysterious-looking decreases clause like “Rank, 0” is useful.

Consider two mutually recursive methods, A and B:

method A(x: nat)
{
  B(x);
}

method B(x: nat)
{
  if x != 0 { A(x-1); }
}

To prove termination of A and B, Dafny needs to have effective decreases clauses for A and B such that:

Satisfying the second of these conditions is easy, but what about the first? Note, for example, that declaring both A and B with “decreases x” does not work, because that won't prove a strict decrease for the call from A(x) to B(x).

Here's one possibility (for brevity, we will omit the method bodies):

method A(x: nat)
  decreases x, 1

method B(x: nat)
  decreases x, 0

For the call from A(x) to B(x), the lexicographic tuple "x, 0" is strictly smaller than "x, 1", and for the call from B(x) to A(x-1), the lexicographic tuple "x-1, 1" is strictly smaller than "x, 0".

Two things to note: First, the choice of “0” and “1” as the second components of these lexicographic tuples is rather arbitrary. It could just as well have been “false” and “true”, respectively, or the sets {2,5} and {2,3,5}. Second, the keyword decreases often gives rise to an intuitive English reading of the declaration. For example, you might say that the recursive calls in the definition of the familiar Fibonacci function Fib(n) “decreases n”. But when the lexicographic tuple contains constants, the English reading of the declaration becomes mysterious and may give rise to questions like “how can you decrease the constant 0?”. The keyword is just that—a keyword. It says “here comes a list of expressions that make up the lexicographic tuple we want to use for the termination measure”. What is important is that one effective decreases clause is compared against another one, and it certainly makes sense to compare something to a constant (and to compare one constant to another).

We can simplify things a little bit by remembering that Dafny appends \top to the user-supplied decreases clause. For the A-and-B example, this lets us drop the constant from the decreases clause of A:

 method A(x: nat)
   decreases x

method B(x: nat)
  decreases x, 0

The effective decreases clause of A is "x, \top" and the effective decreases clause of B is "x, 0, \top". These tuples still satisfy the two conditions (x, 0, \top) < (x, \top) and (x-1, \top) < (x, 0, \top). And as before, the constant “0” is arbitrary; anything less than \top (which is any Dafny expression) would work.

Let's take a look at one more example that better illustrates the utility of \top. Consider again two mutually recursive methods, call them Outer and Inner, representing the recursive counterparts of what iteratively might be two nested loops:

method Outer(x: nat)
{
  // set y to an arbitrary non-negative integer
  var y :| 0 <= y;
  Inner(x, y);
}

method Inner(x: nat, y: nat)
{
  if y != 0 {
    Inner(x, y-1);
  } else if x != 0 {
    Outer(x-1);
  }
}

The body of Outer uses an assign-such-that statement to represent some computation that takes place before Inner is called. It sets “y” to some arbitrary non-negative value. In a more concrete example, Inner would do some work for each “y” and then continue as Outer on the next smaller “x”.

Using a decreases clause "x, y" for Inner seems natural, but if we don't have any bound on the size of the "y" computed by Outer, there is no expression we can write in decreases clause of Outer that is sure to lead to a strictly smaller value for "y" when Inner is called. \top to the rescue. If we arrange for the effective decreases clause of Outer to be "x, \top" and the effective decreases clause for Inner to be "x, y, \top", then we can show the strict decreases as required. Since \top is implicitly appended, the two decreases clauses declared in the program text can be:

method Outer(x: nat)
  decreases x

method Inner(x: nat, y: nat)
  decreases x, y

Moreover, remember that if a function or method has no user-declared decreases clause, Dafny will make a guess. The guess is (usually) the list of arguments of the function/method, in the order given. This is exactly the decreases clauses needed here. Thus, Dafny successfully verifies the program without any explicit decreases clauses:

method Outer(x: nat)
{
  var y :| 0 <= y;
  Inner(x, y);
}

method Inner(x: nat, y: nat)
{
  if y != 0 {
    Inner(x, y-1);
  } else if x != 0 {
    Outer(x-1);
  }
}

The ingredients are simple, but the end result may seem like magic. For many users, however, there may be no magic at all – the end result may be so natural that the user never even has to bothered to think about that there was a need to prove termination in the first place.

4.0.3. Framing

FrameExpression(allowLemma, allowLambda) = 
  ( Expression(allowLemma, allowLambda) [ FrameField ] 
  | FrameField )
FrameField = "`" Ident 
PossiblyWildFrameExpression(allowLemma) = 
    ( "*" | FrameExpression(allowLemma, allowLambda: false) )

Frame expressions are used to denote the set of memory locations that a Dafny program element may read or write. A frame expression is a set expression. The form {} (that is, the empty set) says that no memory locations may be modified, which is also the default if no modifies clause is given explicitly.

Note that framing only applies to the heap, or memory accessed through references. Local variables are not stored on the heap, so they cannot be mentioned (well, they are not in scope in the declaration) in reads annotations. Note also that types like sets, sequences, and multisets are value types, and are treated like integers or local variables. Arrays and objects are reference types, and they are stored on the heap (though as always there is a subtle distinction between the reference itself and the value it points to.)

The FrameField construct is used to specify a field of a class object. The identifier following the back-quote is the name of the field being referenced. If the FrameField is preceded by an expression the expression must be a reference to an object having that field. If the FrameField is not preceded by an expression then the frame expression is referring to that field of the current object. This form is only used from a method of a class.

The use of FrameField is discouraged as in practice it has not been shown to either be more concise or to perform better. Also, there's (unfortunately) no form of it for array elements—one could imagine

  modifies a`[j]

Also, FrameField is not taken into consideration for lambda expressions.

4.0.4. Reads Clause

FunctionReadsClause_ = 
  "reads" 
  PossiblyWildFrameExpression (allowLemma: false)
  { "," PossiblyWildFrameExpression(allowLemma: false) }
LambdaReadsClause_ = 
  "reads" PossiblyWildFrameExpression(allowLemma: true)
IteratorReadsClause_ = 
  "reads" { Attribute } 
  FrameExpression(allowLemma: false, allowLambda: false) 
  { "," FrameExpression(allowLemma: false, allowLambda: false) }
PossiblyWildExpression(allowLambda) = 
    ( "*" | Expression(allowLemma: false, allowLambda) ) 

Functions are not allowed to have side effects but may be restricted in what they can read. The reading frame of a function (or predicate) is all the memory locations that the function is allowed to read. The reason we might limit what a function can read is so that when we write to memory, we can be sure that functions that did not read that part of memory have the same value they did before. For example, we might have two arrays, one of which we know is sorted. If we did not put a reads annotation on the sorted predicate, then when we modify the unsorted array, we cannot determine whether the other array stopped being sorted. While we might be able to give invariants to preserve it in this case, it gets even more complex when manipulating data structures. In this case, framing is essential to making the verification process feasible.

It is not just the body of a function that is subject to reads checks, but also its precondition and the reads clause itself.

A reads clause can list a wildcard (“*”), which allows the enclosing function to read anything. In many cases, and in particular in all cases where the function is defined recursively, this makes it next to impossible to make any use of the function. Nevertheless, as an experimental feature, the language allows it (and it is sound). Note that a “*” makes the rest of the frame expression irrelevant.

A reads clause specifies the set of memory locations that a function, lambda, or iterator may read. If more than one reads clause is given in a specification the effective read set is the union of the sets specified. If there are no reads clauses the effective read set is empty. If "*" is given in a reads clause it means any memory may be read.

TODO: It would be nice if the different forms of read clauses could be combined. In a future version the single form of read clause will allow a list and attributes.

4.0.5. Modifies Clause

ModifiesClause_ = 
  "modifies" { Attribute } 
  FrameExpression(allowLemma: false, allowLambda: false) 
  { "," FrameExpression(allowLemma: false, allowLambda: false) }

Frames also affect methods. As you might have guessed, methods are not required to list the things they read. Methods are allowed to read whatever memory they like, but they are required to list which parts of memory they modify, with a modifies annotation. They are almost identical to their reads cousins, except they say what can be changed, rather than what the value of the function depends on. In combination with reads, modification restrictions allow Dafny to prove properties of code that would otherwise be very difficult or impossible. Reads and modifies are one of the tools that allow Dafny to work on one method at a time, because they restrict what would otherwise be arbitrary modifications of memory to something that Dafny can reason about.

Note that fields of newly allocated objects can always be modified.

It is also possible to frame what can be modified by a block statement by means of the block form of the modify statement (Section 21.16).

A modifies clause specifies the set of memory locations that a method, iterator or loop body may modify. If more than one modifies clause is given in a specification, the effective modifies set is the union of the sets specified. If no modifies clause is given the effective modifies set is empty. A loop can also have a modifies clause. If none is given, the loop gets to modify anything the enclosing context is allowed to modify.

4.0.6. Invariant Clause

InvariantClause_ = 
    "invariant" { Attribute } 
    Expression(allowLemma: false, allowLambda: true)

An invariant clause is used to specify an invariant for a loop. If more than one invariant clause is given for a loop the effective invariant is the conjunction of the conditions specified.

The invariant must hold on entry to the loop. And assuming it is valid on entry, Dafny must be able to prove that it then holds at the end of the loop.

4.1. Method Specification

MethodSpec = 
  { ModifiesClause_
  | RequiresClause_
  | EnsuresClause_
  | DecreasesClause_(allowWildcard: true, allowLambda: false)
  } 

A method specification is zero or more modifies, requires, ensures or decreases clauses, in any order. A method does not have reads clauses because methods are allowed to read any memory.

4.2. Function Specification

FunctionSpec =
  { RequiresClause_
  | FunctionReadsClause_
  | FunctionEnsuresClause_
  | FunctionDecreasesClause_(allowWildcard: false, allowLambda: false)
  } 

A function specification is zero or more reads, requires, ensures or decreases clauses, in any order. A function specification does not have modifies clauses because functions are not allowed to modify any memory.

4.3. Lambda Specification

LambdaSpec_ = 
  { LambdaReadsClause_
  | RequiresClause_ 
  } 

A lambda specification is zero or more reads or requires clauses. Lambda specifications do not have ensures clauses because the body is never opaque. Lambda specifications do not have decreases clauses because they do not have names and thus cannot be recursive. A lambda specification does not have modifies clauses because lambdas are not allowed to modify any memory.

4.4. Iterator Specification

IteratorSpec =
  { IteratorReadsClause_
  | ModifiesClause_
  | [ "yield" ] RequiresClause_
  | [ "yield" ] EnsuresClause_
  | DecreasesClause_(allowWildcard: false, allowLambda: false)
  } 

An iterator specification applies both to the iterator's constructor method and to its MoveNext method. The reads and modifies clauses apply to both of them. For the requires and ensures clauses, if yield is not present they apply to the constructor, but if yield is present they apply to the MoveNext method.

TODO: What is the meaning of a decreases clause on an iterator? Does it apply to MoveNext? Make sure our description of iterators explains these.

TODO: What is the relationship between the post condition and the Valid() predicate?

4.5. Loop Specification

LoopSpec =
  { InvariantClause_
  | DecreasesClause_(allowWildcard: true, allowLambda: true)
  | ModifiesClause_ 
  } 

A loop specification provides the information Dafny needs to prove properties of a loop. The InvariantClause_ clause is effectively a precondition and it along with the negation of the loop test condition provides the postcondition. The DecreasesClause_ clause is used to prove termination.

5. Types

Type = DomainType [ "->" Type ] 

A Dafny type is a domain type (i.e. a type that can be the domain of a function type) optionally followed by an arrow and a range type.

DomainType =
  ( BoolType_ | CharType_ | NatType_ | IntType_ | RealType_ | ObjectType_
  | FiniteSetType_ | InfiniteSetType_ | MultisetType_ 
  | SequenceType_ | StringType_
  | FiniteMapType_ | InfiniteMapType_ | ArrayType_
  | TupleType_ | NamedType_ ) 

The domain types comprise the builtin scalar types, the builtin collection types, tuple types (including as a special case a parenthesized type) and reference types.

Dafny types may be categorized as either value types or reference types.

5.0. Value Types

The value types are those whose values do not lie in the program heap. These are:

Data items having value types are passed by value. Since they are not considered to occupy memory, framing expressions do not reference them.

5.1. Reference Types

Dafny offers a host of reference types. These represent references to objects allocated dynamically in the program heap. To access the members of an object, a reference to (that is, a pointer to or object identity of) the object is dereferenced.

The reference types are class types, traits and array types.

The special value null is part of every reference type.0

5.2. Named Types

NamedType_ = NameSegmentForTypeName { "." NameSegmentForTypeName }

A NamedType_ is used to specify a user-defined type by name (possibly module-qualified). Named types are introduced by class, trait, inductive, co-inductive, synonym and opaque type declarations. They are also used to refer to type variables.

NameSegmentForTypeName = Ident  [ GenericInstantiation ] 

A NameSegmentForTypeName is a type name optionally followed by a GenericInstantiation which supplies type parameters to a generic type, if needed. It is a special case of a NameSegment (See Section 22.35) that does not allow a HashCall.

The following sections describe each of these kinds of types in more detail.

6. Basic types

Dafny offers these basic types: bool for booleans, char for characters, int and nat for integers, and real for reals.

6.0. Booleans

BoolType_ = "bool" 

There are two boolean values and each has a corresponding literal in the language: false and true.

In addition to equality (==) and disequality (!=), which are defined on all types, type bool supports the following operations:

operator description
<==> equivalence (if and only if)
==> implication (implies)
<== reverse implication (follows from)
&& conjunction (and)
|| disjunction (or)
! negation (not)

Negation is unary; the others are binary. The table shows the operators in groups of increasing binding power, with equality binding stronger than conjunction and disjunction, and weaker than negation. Within each group, different operators do not associate, so parentheses need to be used. For example,

A && B || C    // error

would be ambiguous and instead has to be written as either

(A && B) || C

or

A && (B || C)

depending on the intended meaning.

6.0.0. Equivalence Operator

The expressions A <==> B and A == B give the same value, but note that <==> is associative whereas == is chaining. So,

A <==> B <==> C

is the same as

A <==> (B <==> C)

and

(A <==> B) <==> C

whereas

A == B == C

is simply a shorthand for

A == B && B == C

6.0.1. Conjunction and Disjunction

Conjunction is associative and so is disjunction. These operators are short circuiting (from left to right), meaning that their second argument is evaluated only if the evaluation of the first operand does not determine the value of the expression. Logically speaking, the expression A && B is defined when A is defined and either A evaluates to false or B is defined. When A && B is defined, its meaning is the same as the ordinary, symmetric mathematical conjunction ∧. The same holds for || and ∨.

6.0.2. Implication and Reverse Implication

Implication is right associative and is short-circuiting from left to right. Reverse implication B <== A is exactly the same as A ==> B, but gives the ability to write the operands in the opposite order. Consequently, reverse implication is left associative and is short-circuiting from right to left. To illustrate the associativity rules, each of the following four lines expresses the same property, for any A, B, and C of type bool:

A ==> B ==> C
A ==> (B ==> C)  // parentheses redundant, since ==> is right associative
C <== B <== A
(C <== B) <== A  // parentheses redundant, since <== is left associative

To illustrate the short-circuiting rules, note that the expression a.Length is defined for an array a only if a is not null (see Section 5.1), which means the following two expressions are well-formed:

a != null ==> 0 <= a.Length
0 <= a.Length <== a != null

The contrapositive of these two expressions would be:

a.Length < 0 ==> a == null  // not well-formed
a == null <== a.Length < 0  // not well-formed

but these expressions are not well-formed, since well-formedness requires the left (and right, respectively) operand, a.Length < 0, to be well-formed by itself.

Implication A ==> B is equivalent to the disjunction !A || B, but is sometimes (especially in specifications) clearer to read. Since, || is short-circuiting from left to right, note that

a == null || 0 <= a.Length

is well-formed, whereas

0 <= a.Length || a == null  // not well-formed

is not.

In addition, booleans support logical quantifiers (forall and exists), described in section 22.30.

6.1. Numeric types

IntType_ = "int" 
RealType_ = "real" 

Dafny supports numeric types of two kinds, integer-based, which includes the basic type int of all integers, and real-based, which includes the basic type real of all real numbers. User-defined numeric types based on int and real, called newtypes, are described in Section 19. Also, the subset type nat, representing the non-negative subrange of int, is described in Section 20.

The language includes a literal for each non-negative integer, like 0, 13, and 1985. Integers can also be written in hexadecimal using the prefix “0x”, as in 0x0, 0xD, and 0x7c1 (always with a lower case x, but the hexadecimal digits themselves are case insensitive). Leading zeros are allowed. To form negative integers, use the unary minus operator.

There are also literals for some of the non-negative reals. These are written as a decimal point with a nonempty sequence of decimal digits on both sides. For example, 1.0, 1609.344, and 0.5772156649.

For integers (in both decimal and hexadecimal form) and reals, any two digits in a literal may be separated by an underscore in order to improve human readability of the literals. For example:

1_000_000        // easier to read than 1000000
0_12_345_6789    // strange but legal formatting of 123456789
0x8000_0000      // same as 0x80000000 -- hex digits are often placed in groups of 4
0.000_000_000_1  // same as 0.0000000001 -- 1 Ångström

In addition to equality and disequality, numeric types support the following relational operations:

operator description
< less than
<= at most
>= at least
> greater than

Like equality and disequality, these operators are chaining, as long as they are chained in the “same direction”. That is,

A <= B < C == D <= E

is simply a shorthand for

A <= B && B < C && C == D && D <= E

whereas

A < B > C

is not allowed.

There are also operators on each numeric type:

operator description
+ addition (plus)
- subtraction (minus)
* multiplication (times)
/ division (divided by)
% modulus (mod)
- negation (unary minus)

The binary operators are left associative, and they associate with each other in the two groups. The groups are listed in order of increasing binding power, with equality binding more strongly than the multiplicative operators and weaker than the unary operator. Modulus is supported only for integer-based numeric types. Integer division and modulus are the Euclidean division and modulus. This means that modulus always returns a non-negative, regardless of the signs of the two operands. More precisely, for any integer a and non-zero integer b,

a == a / b * b + a % b
0 <= a % b < B

where B denotes the absolute value of b.

Real-based numeric types have a member Trunc that returns the floor of the real value, that is, the largest integer not exceeding the real value. For example, the following properties hold, for any r and r' of type real:

3.14.Trunc == 3
(-2.5).Trunc == -3
-2.5.Trunc == -2
real(r.Trunc) <= r
r <= r' ==> r.Trunc <= r'.Trunc

Note in the third line that member access (like .Trunc) binds stronger than unary minus. The fourth line uses the conversion function real from int to real, as described in Section 19.0.

6.2. Characters

CharType_ = "char" 

Dafny supports a type char of characters. Character literals are enclosed in single quotes, as in 'D'. Their form is described by the charToken nonterminal in the grammar. To write a single quote as a character literal, it is necessary to use an escape sequence. Escape sequences can also be used to write other characters. The supported escape sequences are as follows:

escape sequence meaning
\' the character '
\" the character "
\\ the character \
\0 the null character, same as \u0000
\n line feed
\r carriage return
\t horizontal tab
\uxxxx universal character whose hexadecimal code is xxxx

The escape sequence for a double quote is redundant, because '"' and '\"' denote the same character—both forms are provided in order to support the same escape sequences as for string literals (Section 9.2.4). In the form \uxxxx, the u is always lower case, but the four hexadecimal digits are case insensitive.

Character values are ordered and can be compared using the standard relational operators:

operator description
< less than
<= at most
>= at least
> greater than

Sequences of characters represent strings, as described in Section 9.2.4.

The only other operations on characters are obtaining a character by indexing into a string, and the implicit conversion to string when used as a parameter of a print statement.

TODO: Are there any conversions between char values and numeric values?

7. Type parameters

GenericParameters = "<" TypeVariableName [ "(" "==" ")" ]
      { "," TypeVariableName [ "(" "==" ")" ] } ">" 

Many of the types (as well as functions and methods) in Dafny can be parameterized by types. These type parameters are typically declared inside angle brackets and can stand for any type.

It is sometimes necessary to restrict these type parameters so that they can only be instantiated by certain families of types. As such, Dafny distinguishes types that support the equality operation not only in ghost contexts but also in compiled contexts. To indicate that a type parameter is restricted to such equality supporting types, the name of the type parameter takes the suffix “(==)”.1 For example,

method Compare<T(==)>(a: T, b: T) returns (eq: bool)
{
  if a == b { eq := true; } else { eq := false; }
}

is a method whose type parameter is restricted to equality-supporting types. Again, note that all types support equality in ghost contexts; the difference is only for non-ghost (that is, compiled) code. Co-inductive datatypes, function types, as well as inductive datatypes with ghost parameters are examples of types that are not equality supporting.

Dafny has some inference support that makes certain signatures less cluttered (described in a different part of the Dafny language reference). In some cases, this support will infer that a type parameter must be restricted to equality-supporting types, in which case Dafny adds the “(==)” automatically.

TODO: Need to describe type inference somewhere.

8. Generic Instantiation

GenericInstantiation = "<" Type { "," Type } ">" 

When a generic entity is used, actual types must be specified for each generic parameter. This is done using a GenericInstantiation. If the GenericInstantiation is omitted, type inference will try to fill these in.

9. Collection types

Dafny offers several built-in collection types.

9.0. Sets

FiniteSetType_ = "set" [ GenericInstantiation ]
InfiniteSetType_ = "iset" [ GenericInstantiation ]

For any type T, each value of type set<T> is a finite set of T values.

TODO: Set membership is determined by equality in the type T, so set<T> can be used in a non-ghost context only if T is equality supporting.

For any type T, each value of type iset<T> is a potentially infinite set of T values.

A set can be formed using a set display expression, which is a possibly empty, unordered, duplicate-insensitive list of expressions enclosed in curly braces. To illustrate,

{}        {2, 7, 5, 3}        {4+2, 1+5, a*b}

are three examples of set displays. There is also a set comprehension expression (with a binder, like in logical quantifications), described in section 22.31.

In addition to equality and disequality, set types support the following relational operations:

operator description
< proper subset
<= subset
>= superset
> proper superset

Like the arithmetic relational operators, these operators are chaining.

Sets support the following binary operators, listed in order of increasing binding power:

operator description
!! disjointness
+ set union
- set difference
* set intersection

The associativity rules of +, -, and * are like those of the arithmetic operators with the same names. The expression A !! B, whose binding power is the same as equality (but which neither associates nor chains with equality), says that sets A and B have no elements in common, that is, it is equivalent to

A * B == {}

However, the disjointness operator is chaining, so A !! B !! C !! D means:

A * B == {} && (A + B) * C == {} && (A + B + C) * D == {}

In addition, for any set s of type set<T> or iset<T> and any expression e of type T, sets support the following operations:

expression description
|s| set cardinality
e in s set membership
e !in s set non-membership

The expression e !in s is a syntactic shorthand for !(e in s).

9.1. Multisets

MultisetType_ = "multiset" [ GenericInstantiation ] 

A multiset is similar to a set, but keeps track of the multiplicity of each element, not just its presence or absence. For any type T, each value of type multiset<T> is a map from T values to natural numbers denoting each element's multiplicity. Multisets in Dafny are finite, that is, they contain a finite number of each of a finite set of elements. Stated differently, a multiset maps only a finite number of elements to non-zero (finite) multiplicities.

Like sets, multiset membership is determined by equality in the type T, so multiset<T> can be used in a non-ghost context only if T is equality supporting.

A multiset can be formed using a multiset display expression, which is a possibly empty, unordered list of expressions enclosed in curly braces after the keyword multiset. To illustrate,

multiset{}    multiset{0, 1, 1, 2, 3, 5}    multiset{4+2, 1+5, a*b}

are three examples of multiset displays. There is no multiset comprehension expression.

In addition to equality and disequality, multiset types support the following relational operations:

operator description
< proper multiset subset
<= multiset subset
>= multiset superset
> proper multiset superset

Like the arithmetic relational operators, these operators are chaining.

Multisets support the following binary operators, listed in order of increasing binding power:

operator description
!! multiset disjointness
+ multiset union
- multiset difference
* multiset intersection

The associativity rules of +, -, and * are like those of the arithmetic operators with the same names. The + operator adds the multiplicity of corresponding elements, the - operator subtracts them (but 0 is the minimum multiplicity), and the * has multiplicity that is the minimum of the multiplicity of the operands.

The expression A !! B says that multisets A and B have no elements in common, that is, it is equivalent to

A * B == multiset{}

Like the analogous set operator, !! is chaining.

In addition, for any multiset s of type multiset<T>, expression e of type T, and non-negative integer-based numeric n, multisets support the following operations:

expression description
|s| multiset cardinality
e in s multiset membership
e !in s multiset non-membership
s[e] multiplicity of e in s
s[e := n] multiset update (change of multiplicity)

The expression e in s returns true if and only if s[e] != 0. The expression e !in s is a syntactic shorthand for !(e in s). The expression s[e := n] denotes a multiset like s, but where the multiplicity of element e is n. Note that the multiset update s[e := 0] results in a multiset like s but without any occurrences of e (whether or not s has occurrences of e in the first place). As another example, note that s - multiset{e} is equivalent to:

if e in s then s[e := s[e] - 1] else s

9.2. Sequences

SequenceType_ = "seq" [ GenericInstantiation ] 

For any type T, a value of type seq<T> denotes a sequence of T elements, that is, a mapping from a finite downward-closed set of natural numbers (called indices) to T values. (Thinking of it as a map, a sequence is therefore something of a dual of a multiset.)

9.2.0. Sequence Displays

A sequence can be formed using a sequence display expression, which is a possibly empty, ordered list of expressions enclosed in square brackets. To illustrate,

[]        [3, 1, 4, 1, 5, 9, 3]        [4+2, 1+5, a*b]

are three examples of sequence displays. There is no sequence comprehension expression.

9.2.1. Sequence Relational Operators

In addition to equality and disequality, sequence types support the following relational operations:

operator description
< proper prefix
<= prefix

Like the arithmetic relational operators, these operators are chaining. Note the absence of > and >=.

9.2.2. Sequence Concatenation

Sequences support the following binary operator:

operator description
+ concatenation

Operator + is associative, like the arithmetic operator with the same name.

9.2.3. Other Sequence Expressions

In addition, for any sequence s of type seq<T>, expression e of type T, integer-based numeric i satisfying 0 <= i < |s|, and integer-based numerics lo and hi satisfying 0 <= lo <= hi <= |s|, sequences support the following operations:

expression description
|s| sequence length
s[i] sequence selection
s[i := e] sequence update
e in s sequence membership
e !in s sequence non-membership
s[lo..hi] subsequence
s[lo..] drop
s[..hi] take
s[slices] slice
multiset(s) sequence conversion to a multiset<T>

Expression s[i := e] returns a sequence like s, except that the element at index i is e. The expression e in s says there exists an index i such that s[i] == e. It is allowed in non-ghost contexts only if the element type T is equality supporting. The expression e !in s is a syntactic shorthand for !(e in s).

Expression s[lo..hi] yields a sequence formed by taking the first hi elements and then dropping the first lo elements. The resulting sequence thus has length hi - lo. Note that s[0..|s|] equals s. If the upper bound is omitted, it defaults to |s|, so s[lo..] yields the sequence formed by dropping the first lo elements of s. If the lower bound is omitted, it defaults to 0, so s[..hi] yields the sequence formed by taking the first hi elements of s.

In the sequence slice operation, slices is a nonempty list of length designators separated and optionally terminated by a colon, and there is at least one colon. Each length designator is a non-negative integer-based numeric, whose sum is no greater than |s|. If there are k colons, the operation produces k + 1 consecutive subsequences from s, each of the length indicated by the corresponding length designator, and returns these as a sequence of sequences.2 If slices is terminated by a colon, then the length of the last slice extends until the end of s, that is, its length is |s| minus the sum of the given length designators. For example, the following equalities hold, for any sequence s of length at least 10:

var t := [3.14, 2.7, 1.41, 1985.44, 100.0, 37.2][1:0:3];
assert |t| == 3 && t[0] == [3.14] && t[1] == [];
assert t[2] == [2.7, 1.41, 1985.44];
var u := [true, false, false, true][1:1:];
assert |u| == 3 && u[0][0] && !u[1][0] && u[2] == [false, true];
assert s[10:][0] == s[..10];
assert s[10:][1] == s[10..];

The operation multiset(s) yields the multiset of elements of sequence s. It is allowed in non-ghost contexts only if the element type T is equality supporting.

9.2.4. Strings

StringType_ = "string" 

A special case of a sequence type is seq<char>, for which Dafny provides a synonym: string. Strings are like other sequences, but provide additional syntax for sequence display expressions, namely string literals. There are two forms of the syntax for string literals: the standard form and the verbatim form.

String literals of the standard form are enclosed in double quotes, as in "Dafny". To include a double quote in such a string literal, it is necessary to use an escape sequence. Escape sequences can also be used to include other characters. The supported escape sequences are the same as those for character literals, see Section 6.2. For example, the Dafny expression "say \"yes\"" represents the string 'say "yes"'. The escape sequence for a single quote is redundant, because "'" and "\'" denote the same string—both forms are provided in order to support the same escape sequences as for character literals.

String literals of the verbatim form are bracketed by @" and ", as in @"Dafny". To include a double quote in such a string literal, it is necessary to use the escape sequence "", that is, to write the character twice. In the verbatim form, there are no other escape sequences. Even characters like newline can be written inside the string literal (hence spanning more than one line in the program text).

For example, the following three expressions denote the same string:

"C:\\tmp.txt"
@"C:\tmp.txt"
['C', ':', '\\', 't', 'm', 'p', '.', 't', 'x', 't']

Since strings are sequences, the relational operators < and <= are defined on them. Note, however, that these operators still denote proper prefix and prefix, respectively, not some kind of alphabetic comparison as might be desirable, for example, when sorting strings.

9.3. Finite and Infinite Maps

FiniteMapType_ = "map" [ GenericInstantiation ] 
InfiniteMapType_ = "imap" [ GenericInstantiation ] 

For any types T and U, a value of type map<T,U> denotes a (finite) map from T to U. In other words, it is a look-up table indexed by T. The domain of the map is a finite set of T values that have associated U values. Since the keys in the domain are compared using equality in the type T, type map<T,U> can be used in a non-ghost context only if T is equality supporting.

Similarly, for any types T and U, a value of type imap<T,U> denotes a (possibly) infinite map. In most regards, imap<T,U> is like map<T,U>, but a map of type imap<T,U> is allowed to have an infinite domain.

A map can be formed using a map display expression (see MapDisplayExpr), which is a possibly empty, ordered list of maplets, each maplet having the form t := u where t is an expression of type T and u is an expression of type U, enclosed in square brackets after the keyword map. To illustrate,

map[]    map[20 := true, 3 := false, 20 := false]    map[a+b := c+d]

are three examples of map displays. By using the keyword imap instead of map, the map produced will be of type imap<T,U> instead of map<T,U>. Note that an infinite map (imap) is allowed to have a finite domain, whereas a finite map (map) is not allowed to have an infinite domain. If the same key occurs more than once, only the last occurrence appears in the resulting map.3 There is also a map comprehension expression, explained in section 22.34.

For any map fm of type map<T,U>, any map m of type map<T,U> or imap<T,U>, any expression t of type T, any expression u of type U, and any d in the domain of m (that is, satisfying d in m), maps support the following operations:

expression description
|fm| map cardinality
m[d] map selection
m[t := u] map update
t in m map domain membership
t !in m map domain non-membership

|fm| denotes the number of mappings in fm, that is, the cardinality of the domain of fm. Note that the cardinality operator is not supported for infinite maps. Expression m[d] returns the U value that m associates with d. Expression m[t := u] is a map like m, except that the element at key t is u. The expression t in m says t is in the domain of m and t !in m is a syntactic shorthand for !(t in m).4

Here is a small example, where a map cache of type map<int,real> is used to cache computed values of Joule-Thomson coefficients for some fixed gas at a given temperature:

if K in cache {  // check if temperature is in domain of cache
  coeff := cache[K];  // read result in cache
} else {
  coeff := ComputeJouleThomsonCoefficient(K);  // do expensive computation
  cache := cache[K := coeff];  // update the cache
}

10. Types that stand for other types

SynonymTypeDecl = 
  ( SynonymTypeDefinition_ | OpaqueTypeDefinition_ ) [ ";" ] 

It is sometimes useful to know a type by several names or to treat a type abstractly. Synonym and opaque types serve this purpose.

10.0. Type synonyms

SynonymTypeDefinition_ =
  "type" { Attribute } SynonymTypeName [ GenericParameters ] "=" Type

A type synonym declaration:

type Y<T> = G

declares Y<T> to be a synonym for the type G. Here, T is a nonempty list of type parameters (each of which is optionally designated with the suffix “(==)”), which can be used as free type variables in G. If the synonym has no type parameters, the “<T>” is dropped. In all cases, a type synonym is just a synonym. That is, there is never a difference, other than possibly in error messages produced, between Y<T> and G.

For example, the names of the following type synonyms may improve the readability of a program:

type Replacements<T> = map<T,T>
type Vertex = int

As already described in Section 9.2.4, string is a built-in type synonym for seq<char>, as if it would have been declared as follows:

type string = seq<char>

10.1. Opaque types

OpaqueTypeDefinition_ = "type" { Attribute } SynonymTypeName 
  [ "(" "==" ")" ] [ GenericParameters ] 

A special case of a type synonym is one that is underspecified. Such a type is declared simply by:

type Y<T>

It is known as an opaque type. Its definition can be revealed in a refining module. To indicate that Y designates an equality-supporting type, “(==)” can be written immediately following the name “Y”.

For example, the declarations

type T
function F(t: T): T

can be used to model an uninterpreted function F on some arbitrary type T. As another example,

type Monad<T>

can be used abstractly to represent an arbitrary parameterized monad.

11. Well-founded Functions and Extreme Predicates

This section is a tutorial on well-founded functions and extreme predicates. We place it here in preparation for Section 12 where function and predicate definitions are described.

Recursive functions are a core part of computer science and mathematics. Roughly speaking, when the definition of such a function spells out a terminating computation from given arguments, we may refer to it as a well-founded function. For example, the common factorial and Fibonacci functions are well-founded functions.

There are also other ways to define functions. An important case regards the definition of a boolean function as an extreme solution (that is, a least or greatest solution) to some equation. For computer scientists with interests in logic or programming languages, these extreme predicates are important because they describe the judgments that can be justified by a given set of inference rules (see, e.g., [3, 24, 28, 31, 36]).

To benefit from machine-assisted reasoning, it is necessary not just to understand extreme predicates but also to have techniques for proving theorems about them. A foundation for this reasoning was developed by Paulin-Mohring [29] and is the basis of the constructive logic supported by Coq [1] as well as other proof assistants [2, 34]. Essentially, the idea is to represent the knowledge that an extreme predicate holds by the proof term by which this knowledge was derived. For a predicate defined as the least solution, such proof terms are values of an inductive datatype (that is, finite proof trees), and for the greatest solution, a coinductive datatype (that is, possibly infinite proof trees). This means that one can use induction and coinduction when reasoning about these proof trees. Therefore, these extreme predicates are known as, respectively, inductive predicates and coinductive predicates (or, co-predicates for short). Support for extreme predicates is also available in the proof assistants Isabelle [30] and HOL [6].

Dafny supports both well-founded functions and extreme predicates. This section is a tutorial that describes the difference in general terms, and then describes novel syntactic support in Dafny for defining and proving lemmas with extreme predicates. Although Dafny's verifier has at its core a first-order SMT solver, Dafny's logical encoding makes it possible to reason about fixpoints in an automated way.

The encoding for coinductive predicates in Dafny was described previously [21] and is here described in Section 18.2.

11.0. Function Definitions

To define a function $f \colon X \to Y$ in terms of itself, one can write an equation like

(0)
\[ f \Equal \F(f) \]

where $\mathcal{F}$ is a non-recursive function of type $(X \to Y) \to X \to Y$. Because it takes a function as an argument, $\mathcal{F}$ is referred to as a functor (or functional, but not to be confused by the category-theory notion of a functor). Throughout, I will assume that $\F(f)$ by itself is well defined, for example that it does not divide by zero. I will also assume that $f$ occurs only in fully applied calls in $\F(f)$; eta expansion can be applied to ensure this. If $f$ is a boolean function, that is, if $Y$ is the type of booleans, then I call $f$ a predicate.

For example, the common Fibonacci function over the natural numbers can be defined by the equation

(1)
\[ \fib \Equal \lambda n \bullet\; \ite{n < 2}{n}{\fib(n-2) + \fib(n-1)} \]

With the understanding that the argument $n$ is universally quantified, we can write this equation equivalently as

(2)
\[ \fib(n) \Equal \ite{n < 2}{n}{\fib(n-2) + \fib(n-1)} \]

The fact that the function being defined occurs on both sides of the equation causes concern that we might not be defining the function properly, leading to a logical inconsistency. In general, there could be many solutions to an equation like (0) or there could be none. Let's consider two ways to make sure we're defining the function uniquely.

11.0.0. Well-founded Functions

A standard way to ensure that equation (0) has a unique solution in $f$ is to make sure the recursion is well-founded, which roughly means that the recursion terminates. This is done by introducing any well-founded relation $\Less$ on the domain of $f$ and making sure that the argument to each recursive call goes down in this ordering. More precisely, if we formulate (0) as

(3)
\[ f(x) \Equal \F'(f) \]

then we want to check $E \Less x$ for each call $f(E)$ in $\F'(f)$. When a function definition satisfies this decrement condition, then the function is said to be well-founded.

For example, to check the decrement condition for $\fib$ in (2), we can pick $\Less$ to be the arithmetic less-than relation on natural numbers and check the following, for any $n$:

(4)
\[ 2 \leq n \;\;\Imp\;\; n-2 \Less n \;\And\; n-1 \Less n \]

Note that we are entitled to using the antecedent $2 \leq n$, because that is the condition under which the else branch in (2) is evaluated.

A well-founded function is often thought of as “terminating” in the sense that the recursive depth in evaluating $f$ on any given argument is finite. That is, there are no infinite descending chains of recursive calls. However, the evaluation of $f$ on a given argument may fail to terminate, because its width may be infinite. For example, let $P$ be some predicate defined on the ordinals and let $\PDownward$ be a predicate on the ordinals defined by the following equation:

(5)
\[ \PDownward(o) \Equal P(o) \And \forall p \bullet\; p \Less o \Imp \PDownward(p) \]

With $\Less$ as the usual ordering on ordinals, this equation satisfies the decrement condition, but evaluating $\PDownward(\omega)$ would require evaluating $\PDownward(n)$ for every natural number $n$. However, what we are concerned about here is to avoid mathematical inconsistencies, and that is indeed a consequence of the decrement condition.

11.0.0.0. Example with Well-founded Functions

So that we can later see how inductive proofs are done in Dafny, let's prove that for any $n$, $\fib(n)$ is even iff $n$ is a multiple of $3$. We split our task into two cases. If $n < 2$, then the property follows directly from the definition of $\fib$. Otherwise, note that exactly one of the three numbers $n-2$, $n-1$, and $n$ is a multiple of 3. If $n$ is the multiple of 3, then by invoking the induction hypothesis on $n-2$ and $n-1$, we obtain that $\fib(n-2) + \fib(n-1)$ is the sum of two odd numbers, which is even. If $n-2$ or $n-1$ is a multiple of 3, then by invoking the induction hypothesis on $n-2$ and $n-1$, we obtain that $\fib(n-2) + \fib(n-1)$ is the sum of an even number and an odd number, which is odd. In this proof, we invoked the induction hypothesis on $n-2$ and on $n-1$. This is allowed, because both are smaller than $n$, and hence the invocations go down in the well-founded ordering on natural numbers.

11.0.1. Extreme Solutions

We don't need to exclude the possibility of equation (0) having multiple solutions—instead, we can just be clear about which one of them we want. Let's explore this, after a smidgen of lattice theory.

For any complete lattice $(Y,\leq)$ and any set $X$, we can by pointwise extension define a complete lattice $(X \to Y, \FBelow)$, where for any $f,g \colon X \to Y$,

(6)
\[ f \FBelow q \Equiv \forall x \bullet\; f(x) \leq g(x) \]

In particular, if $Y$ is the set of booleans ordered by implication ($\false \leq \true$), then the set of predicates over any domain $X$ forms a complete lattice. Tarski's Theorem [35] tells us that any monotonic function over a complete lattice has a least and a greatest fixpoint. In particular, this means that $\F$ has a least fixpoint and a greatest fixpoint, provided $\F$ is monotonic.

Speaking about the set of solutions in $f$ to (0) is the same as speaking about the set of fixpoints of functor $\F$. In particular, the least and greatest solutions to (0) are the same as the least and greatest fixpoints of $\F$. In casual speak, it happens that we say “fixpoint of (0)”, or more grotesquely, “fixpoint of $f$” when we really mean “fixpoint of $\F$”.

In conclusion of our little excursion into lattice theory, we have that, under the proviso of $\F$ being monotonic, the set of solutions in $f$ to (0) is nonempty, and among these solutions, there is in the $\FBelow$ ordering a least solution (that is, a function that returns $\false$ more often than any other) and a greatest solution (that is, a function that returns $\true$ more often than any other).

When discussing extreme solutions, I will now restrict my attention to boolean functions (that is, with $Y$ being the type of booleans). Functor $\F$ is monotonic if the calls to $f$ in $\F'(f)$ are in positive positions (that is, under an even number of negations). Indeed, from now on, I will restrict my attention to such monotonic functors $\F$.

Let me introduce a running example. Consider the following equation, where $x$ ranges over the integers:

(7)
\[ g(x) \Equal (x = 0 \Or g(x-2)) \]

This equation has four solutions in $g$. With $w$ ranging over the integers, they are:

(8)
\[ \begin{array}{r@{}l} g(x) \Equiv{}& x \in \{w \;|\; 0 \leq w \And w\textrm{ even}\} \\ g(x) \Equiv{}& x \in \{w \;|\; w\textrm{ even}\} \\ g(x) \Equiv{}& x \in \{w \;|\; (0 \leq w \And w\textrm{ even}) \Or w\textrm{ odd}\} \\ g(x) \Equiv{}& x \in \{w \;|\; \true\} \end{array} \]

The first of these is the least solution and the last is the greatest solution.

In the literature, the definition of an extreme predicate is often given as a set of inference rules. To designate the least solution, a single line separating the antecedent (on top) from conclusion (on bottom) is used:

(9)
\[ \frac{}{g(0)} \qquad\qquad \frac{g(x-2)}{g(x)} \]

Through repeated applications of such rules, one can show that the predicate holds for a particular value. For example, the derivation, or proof tree, to the left in Figure 0 shows that $g(6)$ holds. (In this simple example, the derivation is a rather degenerate proof “tree”.) The use of these inference rules gives rise to a least solution, because proof trees are accepted only if they are finite.

\[\dfrac{ \dfrac{ \dfrac{ \dfrac{}{g(0)\xstrut} }{g(2)\xstrut} }{g(4)\xstrut} }{g(6)\xupstrut} \]
\[\Dfrac{ \Dfrac{ \Dfrac{ \Dfrac{ {}_{\vdots } }{{g(-5)}} }{{g(-3)}} }{{g(-1)}} }{g(1)} \]

Figure 0. Left: a finite proof tree that uses the rules of (9) to establish $g(6)$. Right: an infinite proof tree that uses the rules of (10) to establish $g(1)$.

When inference rules are to designate the greatest solution, a double line is used:

(10)
\[ \Dfrac{}{g(0)} \qquad\qquad \Dfrac{g(x-2)}{g(x)} \]

In this case, proof trees are allowed to be infinite. For example, the (partial depiction of the) infinite proof tree on the right in Figure 0 shows that $g(1)$ holds.

Note that derivations may not be unique. For example, in the case of the greatest solution for $g$, there are two proof trees that establish $g(0)$: one is the finite proof tree that uses the left-hand rule of (10) once, the other is the infinite proof tree that keeps on using the right-hand rule of (10).

11.0.2. Working with Extreme Predicates

In general, one cannot evaluate whether or not an extreme predicate holds for some input, because doing so may take an infinite number of steps. For example, following the recursive calls in the definition (7) to try to evaluate $g(7)$ would never terminate. However, there are useful ways to establish that an extreme predicate holds and there are ways to make use of one once it has been established.

For any $\F$ as in (0), I define two infinite series of well-founded functions, $\iter{f}_k$ and $\Iter{f}_k$ where $k$ ranges over the natural numbers:

(11)
\[ \iter{f}_k(x) \Equal \left\{ \begin{array}{ll} \false & \textrm{if } k = 0 \\ \F(\iter{f}_{k-1})(x) & \textrm{if } k > 0 \end{array} \right. \]
(12)
\[ \Iter{f}_k(x) \Equal \left\{ \begin{array}{ll} \true & \textrm{if } k = 0 \\ \F(\Iter{f}_{k-1})(x) & \textrm{if } k > 0 \end{array} \right. \]

These functions are called the iterates of $f$, and I will also refer to them as the prefix predicates of $f$ (or the prefix predicate of $f$, if we think of $k$ as being a parameter). Alternatively, we can define $\iter{f}_k$ and $\Iter{f}_k$ without mentioning $x$: Let $\bot$ denote the function that always returns $\false$, let $\top$ denote the function that always returns $\true$, and let a superscript on $\F$ denote exponentiation (for example, $\F^0(f) = f$ and $\F^2(f) = \F(\F(f))$). Then, (11) and (12) can be stated equivalently as $\iter{f}_k = \F^k(\bot)$ and $\Iter{f}_k = \F^k(\top)$.

For any solution $f$ to equation (0), we have, for any $k$ and $\ell$ such that $k \leq \ell$:

(13)
\[ \iter{f}_k \quad\FBelow\quad \iter{f}_\ell \quad\FBelow\quad f \quad\FBelow\quad \Iter{f}_\ell \quad\FBelow\quad \Iter{f}_k \]

In other words, every $\iter{f}_k$ is a pre-fixpoint of $f$ and every $\Iter{f}_k$ is a post-fixpoint of $f$. Next, I define two functions, $f\least$ and $f\greatest$, in terms of the prefix predicates:

(14)
\[ f\least(x) \Equal \exists k \bullet\; \iter{f}_k(x) \]
(15)
\[ f\greatest(x) \Equal \forall k \bullet\; \Iter{f}_k(x) \]

By (13), we also have that $f\least$ is a pre-fixpoint of $\F$ and $f\greatest$ is a post-fixpoint of $\F$. The marvelous thing is that, if $\F$ is continuous, then $f\least$ and $f\greatest$ are the least and greatest fixpoints of $\F$. These equations let us do proofs by induction when dealing with extreme predicates. I will explain in Section 11.1.2 how to check for continuity.

Let's consider two examples, both involving function $g$ in (7). As it turns out, $g$'s defining functor is continuous, and therefore I will write $g\least$ and $g\greatest$ to denote the least and greatest solutions for $g$ in (7).

11.0.2.0. Example with Least Solution

The main technique for establishing that $g\least(x)$ holds for some $x$, that is, proving something of the form $Q \Imp g\least(x)$, is to construct a proof tree like the one for $g(6)$ in Figure 0. For a proof in this direction, since we're just applying the defining equation, the fact that we're using a least solution for $g$ never plays a role (as long as we limit ourselves to finite derivations).

The technique for going in the other direction, proving something from an established $g\least$ property, that is, showing something of the form $g\least(x) \Imp R$, typically uses induction on the structure of the proof tree. When the antecedent of our proof obligation includes a predicate term $g\least(x)$, it is sound to imagine that we have been given a proof tree for $g\least(x)$. Such a proof tree would be a data structure—to be more precise, a term in an inductive datatype. For this reason, least solutions like $g\least$ have been given the name inductive predicate.

Let's prove $g\least(x) \Imp 0 \leq x \And x \textrm{ even}$. We split our task into two cases, corresponding to which of the two proof rules in (9) was the last one applied to establish $g\least(x)$. If it was the left-hand rule, then $x=0$, which makes it easy to establish the conclusion of our proof goal. If it was the right-hand rule, then we unfold the proof tree one level and obtain $g\least(x-2)$. Since the proof tree for $g\least(x-2)$ is smaller than where we started, we invoke the induction hypothesis and obtain $0 \leq (x-2) \And (x-2) \textrm{ even}$, from which it is easy to establish the conclusion of our proof goal.

Here's how we do the proof formally using (14). We massage the general form of our proof goal:

$f\greatest(x) \Imp R$
=      { (14) }
$(\exists k \bullet\; \iter{f}_k(x)) \Imp R$
=      { distribute $\Imp$ over $\exists$ to the left }
$\forall k \bullet\; (\iter{f}_k(x) \Imp R)$

The last line can be proved by induction over $k$. So, in our case, we prove $\iter{g}_k(x) \Imp 0 \leq x \And x \textrm{ even}$ for every $k$. If $k=0$, then $\iter{g}_k(x)$ is $\false$, so our goal holds trivially. If $k > 0$, then $\iter{g}_k(x) = (x = 0 \Or \iter{g}_{k-1}(x-2))$. Our goal holds easily for the first disjunct ($x=0$). For the other disjunct, we apply the induction hypothesis (on the smaller $k-1$ and with $x-2$) and obtain $0 \leq (x-2) \And (x-2) \textrm{ even}$, from which our proof goal follows.

11.0.2.1. Example with Greatest Solution

We can think of a given predicate $g\greatest(x)$ as being represented by a proof tree—in this case a term in a coinductive datatype, since the proof may be infinite. For this reason, greatest solutions like $g\greatest$ have been given the name coinductive predicate, or co-predicate for short. The main technique for proving something from a given proof tree, that is, to prove something of the form $g\greatest(x) \Imp R$, is to destruct the proof. Since this is just unfolding the defining equation, the fact that we're using a greatest solution for $g$ never plays a role (as long as we limit ourselves to a finite number of unfoldings).

To go in the other direction, to establish a predicate defined as a greatest solution, like $Q \Imp g\greatest(x)$, we may need an infinite number of steps. For this purpose, we can use induction's dual, coinduction. Were it not for one little detail, coinduction is as simple as continuations in programming: the next part of the proof obligation is delegated to the coinduction hypothesis. The little detail is making sure that it is the “next” part we're passing on for the continuation, not the same part. This detail is called productivity and corresponds to the requirement in induction of making sure we're going down a well-founded relation when applying the induction hypothesis. There are many sources with more information, see for example the classic account by Jacobs and Rutten [8] or a new attempt by Kozen and Silva that aims to emphasize the simplicity, not the mystery, of coinduction [11].

Let's prove $\true \Imp g\greatest(x)$. The intuitive coinductive proof goes like this: According to the right-hand rule of (10), $g\greatest(x)$ follows if we establish $g\greatest(x-2)$, and that's easy to do by invoking the coinduction hypothesis. The “little detail”, productivity, is satisfied in this proof because we applied a rule in (10) before invoking the coinduction hypothesis.

For anyone who may have felt that the intuitive proof felt too easy, here is a formal proof using (15), which relies only on induction. We massage the general form of our proof goal:

$Q \Imp f\greatest(x)$
=      { (15) }
$Q \Imp \forall k \bullet\; \Iter{f}_k(x)$
=      { distribute $\Imp$ over $\forall$ to the right }
$\forall k \bullet\; Q \Imp \Iter{f}_k(x)$

The last line can be proved by induction over $k$. So, in our case, we prove $\true \Imp \Iter{g}_k(x)$ for every $k$. If $k=0$, then $\Iter{g}_k(x)$ is $\true$, so our goal holds trivially. If $k > 0$, then $\Iter{g}_k(x) = (x = 0 \Or \Iter{g}_{k-1}(x-2))$. We establish the second disjunct by applying the induction hypothesis (on the smaller $k-1$ and with $x-2$).

11.0.3. Other Techniques

Although in this paper I consider only well-founded functions and extreme predicates, it is worth mentioning that there are additional ways of making sure that the set of solutions to (0) is nonempty. For example, if all calls to $f$ in $\F'(f)$ are tail-recursive calls, then (under the assumption that $Y$ is nonempty) the set of solutions is nonempty. To see this, consider an attempted evaluation of $f(x)$ that fails to determine a definite result value because of an infinite chain of calls that applies $f$ to each value of some subset $X'$ of $X$. Then, apparently, the value of $f$ for any one of the values in $X'$ is not determined by the equation, but picking any particular result values for these makes for a consistent definition. This was pointed out by Manolios and Moore [25]. Functions can be underspecified in this way in the proof assistants ACL2 [10] and HOL [12].

11.1. Functions in Dafny

In this section, I explain with examples the support in Dafny5 for well-founded functions, extreme predicates, and proofs regarding these.

11.1.0. Well-founded Functions in Dafny

Declarations of well-founded functions are unsurprising. For example, the Fibonacci function is declared as follows:

function fib(n: nat): nat
{
  if n < 2 then n else fib(n-2) + fib(n-1)
}

Dafny verifies that the body (given as an expression in curly braces) is well defined. This includes decrement checks for recursive (and mutually recursive) calls. Dafny predefines a well-founded relation on each type and extends it to lexicographic tuples of any (fixed) length. For example, the well-founded relation $x \Less y$ for integers is $x < y \And 0 \leq y$, the one for reals is $x \leq y - 1.0 \And 0.0 \leq y$ (this is the same ordering as for integers, if you read the integer relation as $x \leq y - 1 \And 0 \leq y$), the one for inductive datatypes is structural inclusion, and the one for coinductive datatypes is $\false$.

Using a decreases clause, the programmer can specify the term in this predefined order. When a function definition omits a decreases clause, Dafny makes a simple guess. This guess (which can be inspected by hovering over the function name in the Dafny IDE) is very often correct, so users are rarely bothered to provide explicit decreases clauses.

If a function returns bool, one can drop the result type : bool and change the keyword function to predicate.

11.1.1. Proofs in Dafny

Dafny has lemma declarations. These are really just special cases of methods: they can have pre- and postcondition specifications and their body is a code block. Here is the lemma we stated and proved in Section 11.0.0.0:

lemma FibProperty(n: nat)
  ensures fib(n) % 2 == 0 <==> n % 3 == 0
{
  if n < 2 {
  } else {
    FibProperty(n-2); FibProperty(n-1);
  }
}

The postcondition of this lemma (keyword ensures) gives the proof goal. As in any program-correctness logic (e.g., [7]), the postcondition must be established on every control path through the lemma's body. For FibProperty, I give the proof by an if statement, hence introducing a case split. The then branch is empty, because Dafny can prove the postcondition automatically in this case. The else branch performs two recursive calls to the lemma. These are the invocations of the induction hypothesis and they follow the usual program-correctness rules, namely: the precondition must hold at the call site, the call must terminate, and then the caller gets to assume the postcondition upon return. The “proof glue” needed to complete the proof is done automatically by Dafny.

Dafny features an aggregate statement using which it is possible to make (possibly infinitely) many calls at once. For example, the induction hypothesis can be called at once on all values n' smaller than n:

forall n' | 0 <= n' < n {
  FibProperty(n');
}

For our purposes, this corresponds to strong induction. More generally, the forall statement has the form

forall k | P(k)
  ensures Q(k)
{ Statements; }

Logically, this statement corresponds to universal introduction: the body proves that Q(k) holds for an arbitrary k such that P(k), and the conclusion of the forall statement is then $\forall k \bullet\; P(k) \Imp Q(k)$. When the body of the forall statement is a single call (or calc statement), the ensures clause is inferred and can be omitted, like in our FibProperty example.

Lemma FibProperty is simple enough that its whole body can be replaced by the one forall statement above. In fact, Dafny goes one step further: it automatically inserts such a forall statement at the beginning of every lemma [19]. Thus, FibProperty can be declared and proved simply by:

lemma FibProperty(n: nat)
  ensures fib(n) % 2 == 0 <==> n % 3 == 0
{ }

Going in the other direction from universal introduction is existential elimination, also known as Skolemization. Dafny has a statement for this, too: for any variable x and boolean expression Q, the assign such that statement x :| Q; says to assign to x a value such that Q will hold. A proof obligation when using this statement is to show that there exists an x such that Q holds. For example, if the fact $\exists k \bullet\; 100 \leq \fib(k) < 200$ is known, then the statement k :| 100 <= fib(k) < 200; will assign to k some value (chosen arbitrarily) for which fib(k) falls in the given range.

11.1.2. Extreme Predicates in Dafny

In this previous subsection, I explained that a predicate declaration introduces a well-founded predicate. The declarations for introducing extreme predicates are inductive predicate and copredicate. Here is the definition of the least and greatest solutions of $g$ from above, let's call them g and G:

inductive predicate g(x: int) { x == 0 || g(x-2) }
copredicate G(x: int) { x == 0 || G(x-2) }

When Dafny receives either of these definitions, it automatically declares the corresponding prefix predicates. Instead of the names $\iter{g}_k$ and $\Iter{g}_k$ that I used above, Dafny names the prefix predicates g#[k] and G#[k], respectively, that is, the name of the extreme predicate appended with #, and the subscript is given as an argument in square brackets. The definition of the prefix predicate derives from the body of the extreme predicate and follows the form in (11) and (12). Using a faux-syntax for illustrative purposes, here are the prefix predicates that Dafny defines automatically from the extreme predicates g and G:

predicate g#[_k: nat](x: int) { _k != 0 && (x == 0 || g#[_k-1](x-2)) }
predicate G#[_k: nat](x: int) { _k != 0 ==> (x == 0 || G#[_k-1](x-2)) }

The Dafny verifier is aware of the connection between extreme predicates and their prefix predicates, (14) and (15).

Remember that to be well defined, the defining functor of an extreme predicate must be monotonic, and for (14) and (15) to hold, the functor must be continuous. Dafny enforces the former of these by checking that recursive calls of extreme predicates are in positive positions. The continuity requirement comes down to checking that they are also in continuous positions: that recursive calls to inductive predicates are not inside unbounded universal quantifiers and that recursive calls to co-predicates are not inside unbounded existential quantifiers [21, 26].

11.1.3. Proofs about Extreme Predicates

From what I have presented so far, we can do the formal proofs from Sections 11.0.2.0 and 11.0.2.1. Here is the former:

lemma EvenNat(x: int)
  requires g(x)
  ensures 0 <= x && x % 2 == 0
{
  var k: nat :| g#[k](x);
  EvenNatAux(k, x);
}
lemma EvenNatAux(k: nat, x: int)
  requires g#[k](x)
  ensures 0 <= x && x % 2 == 0
{
  if x == 0 { } else { EvenNatAux(k-1, x-2); }
}

Lemma EvenNat states the property we wish to prove. From its precondition (keyword requires) and (14), we know there is some k that will make the condition in the assign-such-that statement true. Such a value is then assigned to k and passed to the auxiliary lemma, which promises to establish the proof goal. Given the condition g#[k](x), the definition of g# lets us conclude k != 0 as well as the disjunction x == 0 || g#[k-1](x-2). The then branch considers the case of the first disjunct, from which the proof goal follows automatically. The else branch can then assume g#[k-1](x-2) and calls the induction hypothesis with those parameters. The proof glue that shows the proof goal for x to follow from the proof goal with x-2 is done automatically.

Because Dafny automatically inserts the statement

forall k', x' | 0 <= k' < k && g#[k'](x') {
  EvenNatAux(k', x');
}

at the beginning of the body of EvenNatAux, the body can be left empty and Dafny completes the proof automatically.

Here is the Dafny program that gives the proof from Section 11.0.2.1:

lemma Always(x: int)
  ensures G(x)
{ forall k: nat { AlwaysAux(k, x); } }
lemma AlwaysAux(k: nat, x: int)
  ensures G#[k](x)
{ }

While each of these proofs involves only basic proof rules, the setup feels a bit clumsy, even with the empty body of the auxiliary lemmas. Moreover, the proofs do not reflect the intuitive proofs I described in Section 11.0.2.0 and 11.0.2.1. These shortcoming are addressed in the next subsection.

11.1.4. Nicer Proofs of Extreme Predicates

The proofs we just saw follow standard forms: use Skolemization to convert the inductive predicate into a prefix predicate for some k and then do the proof inductively over k; respectively, by induction over k, prove the prefix predicate for every k, then use universal introduction to convert to the coinductive predicate. With the declarations inductive lemma and colemma, Dafny offers to set up the proofs in these standard forms. What is gained is not just fewer characters in the program text, but also a possible intuitive reading of the proofs. (Okay, to be fair, the reading is intuitive for simpler proofs; complicated proofs may or may not be intuitive.)

Somewhat analogous to the creation of prefix predicates from extreme predicates, Dafny automatically creates a prefix lemma L# from each “extreme lemma” L. The pre- and postconditions of a prefix lemma are copied from those of the extreme lemma, except for the following replacements: For an inductive lemma, Dafny looks in the precondition to find calls (in positive, continuous positions) to inductive predicates P(x) and replaces these with P#[_k](x). For a co-lemma, Dafny looks in the postcondition to find calls (in positive, continuous positions) to co-predicates P (including equality among coinductive datatypes, which is a built-in co-predicate) and replaces these with P#[_k](x). In each case, these predicates P are the lemma's focal predicates.

The body of the extreme lemma is moved to the prefix lemma, but with replacing each recursive call L(x) with L#[_k-1](x) and replacing each occurrence of a call to a focal predicate P(x) with P#[_k-1](x). The bodies of the extreme lemmas are then replaced as shown in the previous subsection. By construction, this new body correctly leads to the extreme lemma's postcondition.

Let us see what effect these rewrites have on how one can write proofs. Here are the proofs of our running example:

inductive lemma EvenNat(x: int)
  requires g(x)
  ensures 0 <= x && x % 2 == 0
{ if x == 0 { } else { EvenNat(x-2); } }
colemma Always(x: int)
  ensures G(x)
{ Always(x-2); }

Both of these proofs follow the intuitive proofs given in Sections 11.0.2.0 and 11.0.2.1. Note that in these simple examples, the user is never bothered with either prefix predicates nor prefix lemmas—the proofs just look like “what you'd expect”.

Since Dafny automatically inserts calls to the induction hypothesis at the beginning of each lemma, the bodies of the given extreme lemmas EvenNat and Always can be empty and Dafny still completes the proofs. Folks, it doesn't get any simpler than that!

12. Class Types

ClassDecl = "class" { Attribute } ClassName [ GenericParameters ]
  ["extends" Type {"," Type} ] 
  "{" { { DeclModifier } ClassMemberDecl(moduleLevelDecl: false) } "}" 
ClassMemberDecl(moduleLevelDecl) = 
  ( FieldDecl | FunctionDecl | 
    MethodDecl(isGhost: ("ghost" was present), 
               allowConstructor: !moduleLevelDecl) 
  ) 

The ClassMemberDecl parameter moduleLevelDecl will be true if the member declaration is at the top level or directly within a module declaration. It will be false for ClassMemberDecls that are part of a class or trait declaration. If moduleLevelDecl is false FieldDecls are not allowed.

A class C is a reference type declared as follows:

class C<T> extends J1, ..., Jn
{
  members
}

where the list of type parameters T is optional and so is “extends J1, ..., Jn”, which says that the class extends traits J1Jn. The members of a class are fields, functions, and methods. These are accessed or invoked by dereferencing a reference to a C instance.

A function or method is invoked on an instance of C, unless the function or method is declared static. A function or method that is not static is called an instance function or method.

An instance function or method takes an implicit receiver parameter, namely, the instance used to access the member. In the specification and body of an instance function or method, the receiver parameter can be referred to explicitly by the keyword this. However, in such places, members of this can also be mentioned without any qualification. To illustrate, the qualified this.f and the unqualified f refer to the same field of the same object in the following example:

class C {
  var f: int
  method Example() returns (b: bool)
  {
    b := f == this.f;
  }
}

so the method body always assigns true to the out-parameter b. There is no semantic difference between qualified and unqualified accesses to the same receiver and member.

A C instance is created using new, for example:

c := new C;

Note that new simply allocates a C object and returns a reference to it; the initial values of its fields are arbitrary values of their respective types. Therefore, it is common to invoke a method, known as an initialization method, immediately after creation, for example:

c := new C;
c.InitFromList(xs, 3);

When an initialization method has no out-parameters and modifies no more than this, then the two statements above can be combined into one:

c := new C.InitFromList(xs, 3);

Note that a class can contain several initialization methods, that these methods can be invoked at any time, not just as part of a new, and that new does not require that an initialization method be invoked at creation.

A clas can declare special initializing methods called constructor methods. See Section 12.1.

12.0. Field Declarations

FieldDecl = "var" { Attribute } FIdentType { "," FIdentType }

An FIdentType is used to declare a field. The field name is either an identifier (that is not allowed to start with a leading underscore) or some digits. Digits are used if you want to number your fields, e.g. “0”, “1”, etc.

FIdentType = ( FieldIdent | digits ) ":" Type 

A field x of some type T is declared as:

var x: T

A field declaration declares one or more fields of the enclosing class. Each field is a named part of the state of an object of that class. A field declaration is similar to but distinct from a variable declaration statement. Unlike for local variables and bound variables, the type is required and will not be inferred.

Unlike method and function declarations, a field declaration cannot be given at the top level. Fields can be declared in either a class or a trait. A class that inherits from multiple traits will have all the fields declared in any of its parent traits.

Fields that are declared as ghost can only be used in specifications, not in code that will be compiled into executable code.

Fields may not be declared static.

protected is not allowed for fields.

12.1. Method Declarations

MethodDecl(isGhost, allowConstructor) = 
 MethodKeyword { Attribute } [ MethodName ]
 (  MethodSignature(isGhost)  | SignatureEllipsis_ )
 MethodSpec [ BlockStmt ]

The isGhost parameter is true iff the ghost keyword preceded the method declaration.

If the allowConstructor parameter is false then the MethodDecl must not be a constructor declaration.

MethodKeyword = ("method" | "lemma" | "colemma"
                | "inductive" "lemma" | "constructor" )

The method keyword is used to specify special kinds of methods as explained below.

MethodSignature(isGhost) = 
    [ GenericParameters ] 
    Formals(allowGhost: !isGhost) 
    [ "returns" Formals(allowGhost: !isGhost) ]

A method signature specifies the method generic parameters, input parameters and return parameters. The formal parameters are not allowed to have ghost specified if ghost was already specified for the method.

SignatureEllipsis_ = "…"

A SignatureEllipsis_ is used when a method or function is being redeclared in module that refines another module. In that case the signature is copied from the module that is being refined. This works because Dafny does not support method or function overloading, so the name of the class method uniquely identifies it without the signature.

Formals(allowGhostKeyword) = 
  "(" [ GIdentType(allowGhostKeyword) 
        { "," GIdentType(allowGhostKeyword) } ] ")" 

The Formals specifies the names and types of the method input or output parameters.

See section 4.1 for a description of MethodSpec.

A method declaration adheres to the MethodDecl grammar above. Here is an example of a method declaration.

method {:att1}{:att2} M<T1, T2>(a: A, b: B, c: C) returns (x: X, y: Y, z: Z)
  requires Pre
  modifies Frame
  ensures Post
  decreases Rank
{
  Body
}

where :att1 and :att2 are attributes of the method, T1 and T2 are type parameters of the method (if generic), a, b, c are the method’s in-parameters, x, y, z are the method’s out-parameters, Pre is a boolean expression denoting the method’s precondition, Frame denotes a set of objects whose fields may be updated by the method, Post is a boolean expression denoting the method’s postcondition, Rank is the method’s variant function, and Body is a statement that implements the method. Frame can be a list of expressions, each of which is a set of objects or a single object, the latter standing for the singleton set consisting of that one object. The method’s frame is the union of these sets, plus the set of objects allocated by the method body. For example, if c and d are parameters of a class type C, then

modifies {c, d}

modifies {c} + {d}

modifies c, {d}

modifies c, d

all mean the same thing.

A method can be declared as ghost by preceding the declaration with the keyword ghost. By default, a method has an implicit receiver parameter, this. This parameter can be removed by preceding the method declaration with the keyword static. A static method M in a class C can be invoked by C.M(…).

In a class, a method can be declared to be a constructor method by replacing the keyword method with the keyword constructor. A constructor can only be called at the time an object is allocated (see object-creation examples below), and for a class that contains one or more constructors, object creation must be done in conjunction with a call to a constructor.

An ordinary method is declared with the method keyword. Section 12.1.0 explains methods that instead use the constructor keyword. Section 12.1.1 discusses methods that are declared with the lemma keyword. Methods declared with the inductive lemma keywords are discussed later in the context of inductive predicates (see 18.0). Methods declared with the colemma keyword are discussed later in the context of co-inductive types, in section 18.2.4.1.

A method without is body is abstract. A method is allowed to be abstract under the following circumstances:

12.1.0. Constructors

To write structured object-oriented programs, one often relies on that objects are constructed only in certain ways. For this purpose, Dafny provides constructor (method)s, which are a restricted form of initialization methods. A constructor is declared with the keyword constructor instead of method. When a class contains a constructor, every call to new for that class must be accompanied with a call to one of the constructors. Moreover, a constructor cannot be called at other times, only during object creation. Other than these restrictions, there is no semantic difference between using ordinary initialization methods and using constructors.

The Dafny design allows the constructors to be named, which promotes using names like InitFromList above. Still, many classes have just one constructor or have a typical constructor. Therefore, Dafny allows one anonymous constructor, that is, a constructor whose name is essentially “”. For example:

class Item {
  constructor (x: int, y: int)
  // ...
}

When invoking this constructor, the “.” is dropped, as in:

m := new Item(45, 29);

Note that an anonymous constructor is just one way to name a constructor; there can be other constructors as well.

12.1.1. Lemmas

Sometimes there are steps of logic required to prove a program correct, but they are too complex for Dafny to discover and use on its own. When this happens, we can often give Dafny assistance by providing a lemma. This is done by declaring a method with the lemma keyword. Lemmas are implicitly ghost methods and the ghost keyword cannot be applied to them.

For an example, see the FibProperty lemma in Section 11.1.1.

See the Dafny Lemmas tutorial for more examples and hints for using lemmas.

12.2. Function Declarations

FunctionDecl = 
  ( "function" [ "method" ] { Attribute }
    FunctionName 
    FunctionSignatureOrEllipsis_(allowGhostKeyword: ("method" present))
  | "predicate" [ "method" ] { Attribute }
    PredicateName 
    PredicateSignatureOrEllipsis_(allowGhostKeyword: ("method" present))
  | "inductive" "predicate" { Attribute }
    PredicateName 
    PredicateSignatureOrEllipsis_(allowGhostKeyword: false)
  | "copredicate" { Attribute }
    CopredicateName 
    PredicateSignatureOrEllipsis_(allowGhostKeyword: false)
  )
  FunctionSpec [ FunctionBody ] 

FunctionSignatureOrEllipsis_(allowGhostKeyword) =
    FunctionSignature_ | SignatureEllipsis_ 
FunctionSignature_(allowGhostKeyword) =
    [ GenericParameters ] Formals(allowGhostKeyword) ":" Type 

PredicateSignatureOrEllipsis_(allowGhostKeyword) =
    PredicateSignature_(allowGhostKeyword) | SignatureEllipsis_ 
PredicateSignature_(allowGhostKeyword) =
    [ GenericParameters ] Formals(allowGhostKeyword)

FunctionBody = "{" Expression(allowLemma: true, allowLambda: true) "}" 

In the above productions, allowGhostKeyword is true if the optional “method” keyword was specified. This allows some of the formal parameters of a function method to be specified as ghost.

See section 4.2 for a description of FunctionSpec.

A Dafny function is a pure mathematical function. It is allowed to read memory that was specified in its reads expression but is not allowed to have any side effects.

Here is an example function declaration:

function {:att1}{:att2} F<T1, T2>(a: A, b: B, c: C): T
  requires Pre
  reads Frame
  ensures Post
  decreases Rank
{
  Body
}

where :att1 and :att2 are attributes of the function, if any, T1 and T2 are type parameters of the function (if generic), a, b, c are the functions’s parameters, T is the type of the function’s result, Pre is a boolean expression denoting the function’s precondition, Frame denotes a set of objects whose fields the function body may depend on, Post is a boolean expression denoting the function’s postcondition, Rank is the function’s variant function, and Body is an expression that defines the function return value. The precondition allows a function to be partial, that is, the precondition says when the function is defined (and Dafny will verify that every use of the function meets the precondition). The postcondition is usually not needed, since the body of the function gives the full definition. However, the postcondition can be a convenient place to declare properties of the function that may require an inductive proof to establish. For example:

function Factorial(n: int): int
  requires 0 <= n
  ensures 1 <= Factorial(n)
{
  if n == 0 then 1 else Factorial(n-1) * n
}

says that the result of Factorial is always positive, which Dafny verifies inductively from the function body. To refer to the function’s result in the postcondition, use the function itself, as shown in the example.

By default, a function is ghost, and cannot be called from non-ghost code. To make it non-ghost, replace the keyword function with the two keywords “function method”.

By default, a function has an implicit receiver parameter, this. This parameter can be removed by preceding the function declaration with the keyword static. A static function F in a class C can be invoked by C.F(…). This can give a convenient way to declare a number of helper functions in a separate class.

As for methods, a SignatureEllipsis_ is used when declaring a function in a module refinement. For example, if module M0 declares function F, a module M1 can be declared to refine M0 and M1 can then refine F. The refinement function, M1.F can have a SignatureEllipsis_ which means to copy the signature form M0.F. A refinement function can furnish a body for a function (if M0.F does not provide one). It can also add ensures clauses. And if F is a predicate, it can add conjuncts to a previously given body.

12.2.0. Function Transparency

A function is said to be transparent in a location if the contents of the body of the function is visible at that point. A function is said to be opaque at a location if it is not transparent. However the FunctionSpec of a function is always available.

A function is usually transparent up to some unrolling level (up to 1, or maybe 2 or 3). If its arguments are all literals it is transparent all the way.

But the transparency of a function is affected by the following:

The following table summarizes where the function is transparent. The module referenced in the table is the module in which the function is defined.

Protected? {:opaque}? Transparent Transparent
Inside Outside
Module Module
N N Y Y
Y N Y N
N Y N N

When {:opaque} is specified for function g, g is opaque, however the lemma reveal_g is available to give the semantics of g whether in the defining module or outside.

It currently is not allowed to have both protected and {:opaque} specified for a function.

12.2.1. Predicates

A function that returns a bool results is called a predicate. As an alternative syntax, a predicate can be declared by replacing the function keyword with the predicate keyword and omitting a declaration of the return type.

12.2.2. Inductive Predicates and Lemmas

See section 11.1.2 for descriptions of inductive predicates and lemmas.

13. Trait Types

TraitDecl = "trait" { Attribute } TraitName [ GenericParameters ]
  "{" { { DeclModifier } ClassMemberDecl(moduleLevelDecl: false) } "}" 

A trait is an “abstract superclass”, or call it an “interface” or “mixin”. Traits are new to Dafny and are likely to evolve for a while.

The declaration of a trait is much like that of a class:

trait J
{
  members
}

where members can include fields, functions, and methods, but no constructor methods. The functions and methods are allowed to be declared static.

A reference type C that extends a trait J is assignable to J, but not the other way around. The members of J are available as members of C. A member in J is not allowed to be redeclared in C, except if the member is a non-static function or method without a body in J. By doing so, type C can supply a stronger specification and a body for the member.

new is not allowed to be used with traits. Therefore, there is no object whose allocated type is a trait. But there can of course be objects of a class C that implements a trait J, and a reference to such a C object can be used as a value of type J.

As an example, the following trait represents movable geometric shapes:

trait Shape
{
  function method Width(): real
    reads this
  method Move(dx: real, dy: real)
    modifies this
  method MoveH(dx: real)
    modifies this
  {
    Move(dx, 0.0);
  }
}

Members Width and Move are abstract (that is, body less) and can be implemented differently by different classes that extend the trait. The implementation of method MoveH is given in the trait and thus gets used by all classes that extend Shape. Here are two classes that each extends Shape:

class UnitSquare extends Shape
{
  var x: real, y: real
  function method Width(): real {  // note the empty reads clause
    1.0
  }
  method Move(dx: real, dy: real)
    modifies this
  {
    x, y := x + dx, y + dy;
  }
}
class LowerRightTriangle extends Shape
{
  var xNW: real, yNW: real, xSE: real, ySE: real
  function method Width(): real
    reads this
  {
    xSE - xNW
  }
  method Move(dx: real, dy: real)
    modifies this
  {
    xNW, yNW, xSE, ySE := xNW + dx, yNW + dy, xSE + dx, ySE + dy;
  }
}

Note that the classes can declare additional members, that they supply implementations for the abstract members of the trait, that they repeat the member signatures, and that they are responsible for providing their own member specifications that both strengthen the corresponding specification in the trait and are satisfied by the provided body. Finally, here is some code that creates two class instances and uses them together as shapes:

var myShapes: seq<Shape>;
var A := new UnitSquare;
myShapes := [A];
var tri := new LowerRightTriangle;
// myShapes contains two Shape values, of different classes
myShapes := myShapes + [tri];
// move shape 1 to the right by the width of shape 0
myShapes[1].MoveH(myShapes[0].Width());

14. Array Types

ArrayType_ = arrayToken [ GenericInstantiation ] 

Dafny supports mutable fixed-length array types of any positive dimension. Array types are reference types.

14.0. One-dimensional arrays

A one-dimensional array of n T elements is created as follows:

a := new T[n];

The initial values of the array elements are arbitrary values of type T. The length of an array is retrieved using the immutable Length member. For example, the array allocated above satisfies:

a.Length == n

For any integer-based numeric i in the range 0 <= i < a.Length, the array selection expression a[i] retrieves element i (that is, the element preceded by i elements in the array). The element stored at i can be changed to a value t using the array update statement:

a[i] := t;

Caveat: The type of the array created by new T[n] is array<T>. A mistake that is simple to make and that can lead to befuddlement is to write array<T> instead of T after new. For example, consider the following:

var a := new array<T>;
var b := new array<T>[n];
var c := new array<T>(n);  // resolution error
var d := new array(n);  // resolution error

The first statement allocates an array of type array<T>, but of unknown length. The second allocates an array of type array<array<T>> of length n, that is, an array that holds n values of type array<T>. The third statement allocates an array of type array<T> and then attempts to invoke an anonymous constructor on this array, passing argument n. Since array has no constructors, let alone an anonymous constructor, this statement gives rise to an error. If the type-parameter list is omitted for a type that expects type parameters, Dafny will attempt to fill these in, so as long as the array type parameter can be inferred, it is okay to leave off the “<T>” in the fourth statement above. However, as with the third statement, array has no anonymous constructor, so an error message is generated.

One-dimensional arrays support operations that convert a stretch of consecutive elements into a sequence. For any array a of type array<T>, integer-based numerics lo and hi satisfying 0 <= lo <= hi <= a.Length, the following operations each yields a seq<T>:

expression description
a[lo..hi] subarray conversion to sequence
a[lo..] drop
a[..hi] take
a[..] array conversion to sequence

The expression a[lo..hi] takes the first hi elements of the array, then drops the first lo elements thereof and returns what remains as a sequence. The resulting sequence thus has length hi - lo. The other operations are special instances of the first. If lo is omitted, it defaults to 0 and if hi is omitted, it defaults to a.Length. In the last operation, both lo and hi have been omitted, thus a[..] returns the sequence consisting of all the array elements of a.

The subarray operations are especially useful in specifications. For example, the loop invariant of a binary search algorithm that uses variables lo and hi to delimit the subarray where the search key may be still found can be expressed as follows:

key !in a[..lo] && key !in a[hi..]

Another use is to say that a certain range of array elements have not been changed since the beginning of a method:

a[lo..hi] == old(a[lo..hi])

or since the beginning of a loop:

ghost var prevElements := a[..];
while // ...
  invariant a[lo..hi] == prevElements[lo..hi]
{
  // ...
}

Note that the type of prevElements in this example is seq<T>, if a has type array<T>.

A final example of the subarray operation lies in expressing that an array's elements are a permutation of the array's elements at the beginning of a method, as would be done in most sorting algorithms. Here, the subarray operation is combined with the sequence-to-multiset conversion:

multiset(a[..]) == multiset(old(a[..]))

14.1. Multi-dimensional arrays

An array of 2 or more dimensions is mostly like a one-dimensional array, except that new takes more length arguments (one for each dimension), and the array selection expression and the array update statement take more indices. For example:

matrix := new T[m, n];
matrix[i, j], matrix[x, y] := matrix[x, y], matrix[i, j];

create a 2-dimensional array whose dimensions have lengths m and n, respectively, and then swaps the elements at i,j and x,y. The type of matrix is array2<T>, and similarly for higher-dimensional arrays (array3<T>, array4<T>, etc.). Note, however, that there is no type array0<T>, and what could have been array1<T> is actually named just array<T>.

The new operation above requires m and n to be non-negative integer-based numerics. These lengths can be retrieved using the immutable fields Length0 and Length1. For example, the following holds of the array created above:

matrix.Length0 == m && matrix.Length1 == n

Higher-dimensional arrays are similar (Length0, Length1, Length2, …). The array selection expression and array update statement require that the indices are in bounds. For example, the swap statement above is well-formed only if:

0 <= i < matrix.Length0 && 0 <= j < matrix.Length1 &&
0 <= x < matrix.Length0 && 0 <= y < matrix.Length1

In contrast to one-dimensional arrays, there is no operation to convert stretches of elements from a multi-dimensional array to a sequence.

15. Type object

ObjectType_ = "object"

There is a built-in trait object that is like a supertype of all reference types.6 Every class automatically extends object and so does every user-defined trait. The purpose of type object is to enable a uniform treatment of dynamic frames. In particular, it is useful to keep a ghost field (typically named Repr for “representation”) of type set<object>.

16. Iterator types

IteratorDecl = "iterator" { Attribute } IteratorName
  ( [ GenericParameters ] 
    Formals(allowGhostKeyword: true)
    [ "yields" Formals(allowGhostKeyword: true) ]
  | "…"
  )
  IteratorSpec [ BlockStmt ] 

See section 4.4 for a description of IteratorSpec.

An iterator provides a programming abstraction for writing code that iteratively returns elements. These CLU-style iterators are co-routines in the sense that they keep track of their own program counter and control can be transferred into and out of the iterator body.

An iterator is declared as follows:

iterator Iter<T>(in-params) yields (yield-params)
  specification
{
  body
}

where T is a list of type parameters (as usual, if there are no type parameters, “<T>” is omitted). This declaration gives rise to a reference type with the same name, Iter<T>. In the signature, in-parameters and yield-parameters are the iterator's analog of a method's in-parameters and out-parameters. The difference is that the out-parameters of a method are returned to a caller just once, whereas the yield-parameters of an iterator are returned each time the iterator body performs a yield. The body consists of statements, like in a method body, but with the availability also of yield statements.

From the perspective of an iterator client, the iterator declaration can be understood as generating a class Iter<T> with various members, a simplified version of which is described next.

The Iter<T> class contains an anonymous constructor whose parameters are the iterator's in-parameters:

predicate Valid()
constructor (in-params)
  modifies this
  ensures Valid()

An iterator is created using new and this anonymous constructor. For example, an iterator willing to return ten consecutive integers from start can be declared as follows:

iterator Gen(start: int) yields (x: int)
{
  var i := 0;
  while i < 10 {
    x := start + i;
    yield;
    i := i + 1;
  }
}

An instance of this iterator is created using:

iter := new Gen(30);

The predicate Valid() says when the iterator is in a state where one can attempt to compute more elements. It is a postcondition of the constructor and occurs in the specification of the MoveNext member:

method MoveNext() returns (more: bool)
  requires Valid()
  modifies this
  ensures more ==> Valid()

Note that the iterator remains valid as long as MoveNext returns true. Once MoveNext returns false, the MoveNext method can no longer be called. Note, the client is under no obligation to keep calling MoveNext until it returns false, and the body of the iterator is allowed to keep returning elements forever.

The in-parameters of the iterator are stored in immutable fields of the iterator class. To illustrate in terms of the example above, the iterator class Gen contains the following field:

var start: int

The yield-parameters also result in members of the iterator class:

var x: int

These fields are set by the MoveNext method. If MoveNext returns true, the latest yield values are available in these fields and the client can read them from there.

To aid in writing specifications, the iterator class also contains ghost members that keep the history of values returned by MoveNext. The names of these ghost fields follow the names of the yield-parameters with an “s” appended to the name (to suggest plural). Name checking rules make sure these names do not give rise to ambiguities. The iterator class for Gen above thus contains:

ghost var xs: seq<int>

These history fields are changed automatically by MoveNext, but are not assignable by user code.

Finally, the iterator class contains some special fields for use in specifications. In particular, the iterator specification gets recorded in the following immutable fields:

ghost var _reads: set<object>
ghost var _modifies: set<object>
ghost var _decreases0: T0
ghost var _decreases1: T1
// ...

where there is a _decreasesi: Ti field for each component of the iterator's decreases clause.7 In addition, there is a field:

ghost var _new: set<object>;

to which any objects allocated on behalf of the iterator body get added. The iterator body is allowed to remove elements from the _new set, but cannot by assignment to _new add any elements.

Note, in the precondition of the iterator, which is to hold upon construction of the iterator, the in-parameters are indeed in-parameters, not fields of this.

It's regrettably tricky to use iterators. The language really ought to have a foreach statement to make this easier. Here is an example showing definition and use of an iterator.

iterator Iter<T>(s: set<T>) yields (x: T)
  yield ensures x in s && x !in xs[..|xs|-1];
  ensures s == set z | z in xs;
{
  var r := s;
  while (r != {})
    invariant forall z :: z in xs ==> x !in r;  // r and xs are disjoint
    invariant s == r + set z | z in xs;
  {
    var y :| y in r;
    r, x := r - {y}, y;
    yield;
    assert y == xs[|xs|-1];  // needed as a lemma to prove loop invariant
  }
}

method UseIterToCopy<T>(s: set<T>) returns (t: set<T>)
  ensures s == t;
{
  t := {};
  var m := new Iter(s);
  while (true)
    invariant m.Valid() && fresh(m._new);
    invariant t == set z | z in m.xs;
    decreases s - t;
  {
    var more := m.MoveNext();
    if (!more) { break; }
    t := t + {m.x};
  }
}

17. Function types

Type = DomainType "->" Type  

Functions are first-class values in Dafny. Function types have the form (T) -> U where T is a comma-delimited list of types and U is a type. T is called the function's domain type(s) and U is its range type. For example, the type of a function

function F(x: int, b: bool): real

is (int, bool) -> real. Parameters are not allowed to be ghost.

To simplify the appearance of the basic case where a function's domain consist of a list of exactly one type, the parentheses around the domain type can be dropped in this case, as in T -> U. This innocent simplification requires additional explanation in the case where that one type is a tuple type, since tuple types are also written with enclosing parentheses. If the function takes a single argument that is a tuple, an additional set of parentheses is needed. For example, the function

function G(pair: (int, bool)): real

has type ((int, bool)) -> real. Note the necessary double parentheses. Similarly, a function that takes no arguments is different from one that takes a 0-tuple as an argument. For instance, the functions

function NoArgs(): real
function Z(unit: ()): real

have types () -> real and (()) -> real, respectively.

The function arrow, ->, is right associative, so A -> B -> C means A -> (B -> C). The other association requires explicit parentheses: (A -> B) -> C.

Note that the receiver parameter of a named function is not part of the type. Rather, it is used when looking up the function and can then be thought of as being captured into the function definition. For example, suppose function F above is declared in a class C and that c references an object of type C; then, the following is type correct:

var f: (int, bool) -> real := c.F;

whereas it would have been incorrect to have written something like:

var f': (C, int, bool) -> real := F;  // not correct

Outside its type signature, each function value has three properties, described next.

Every function implicitly takes the heap as an argument. No function ever depends on the entire heap, however. A property of the function is its declared upper bound on the set of heap locations it depends on for a given input. This lets the verifier figure out that certain heap modifications have no effect on the value returned by a certain function. For a function f: T -> U and a value t of type T, the dependency set is denoted f.reads(t) and has type set<object>.

The second property of functions stems from the fact that every function is potentially partial. In other words, a property of a function is its precondition. For a function f: T -> U, the precondition of f for a parameter value t of type T is denoted f.requires(t) and has type bool.

The third property of a function is more obvious—the function's body. For a function f: T -> U, the value that the function yields for an input t of type T is denoted f(t) and has type U.

Note that f.reads and f.requires are themselves functions. Suppose f has type T -> U and t has type T. Then, f.reads is a function of type T -> set<object> whose reads and requires properties are:

f.reads.reads(t) == f.reads(t)
f.reads.requires(t) == true

f.requires is a function of type T -> bool whose reads and requires properties are:

f.requires.reads(t) == f.reads(t)
f.requires.requires(t) == true

Dafny also support anonymous functions by means of lambda expressions. See section 22.9.

18. Algebraic Datatypes

Dafny offers two kinds of algebraic datatypes, those defined inductively and those defined co-inductively. The salient property of every datatype is that each value of the type uniquely identifies one of the datatype's constructors and each constructor is injective in its parameters.

DatatypeDecl = ( InductiveDatatypeDecl | CoinductiveDatatypeDecl ) 

18.0. Inductive datatypes

InductiveDatatypeDecl_ = "datatype" { Attribute } DatatypeName [ GenericParameters ]
  "=" DatatypeMemberDecl { "|" DatatypeMemberDecl } [ ";" ] 
DatatypeMemberDecl = { Attribute } DatatypeMemberName [ FormalsOptionalIds ] 

The values of inductive datatypes can be seen as finite trees where the leaves are values of basic types, numeric types, reference types, co-inductive datatypes, or function types. Indeed, values of inductive datatypes can be compared using Dafny's well-founded < ordering.

An inductive datatype is declared as follows:

datatype D<T> = Ctors

where Ctors is a nonempty |-separated list of (datatype) constructors for the datatype. Each constructor has the form:

C(params)

where params is a comma-delimited list of types, optionally preceded by a name for the parameter and a colon, and optionally preceded by the keyword ghost. If a constructor has no parameters, the parentheses after the constructor name can be omitted. If no constructor takes a parameter, the type is usually called an enumeration; for example:

datatype Friends = Agnes | Agatha | Jermaine | Jack

For every constructor C, Dafny defines a discriminator C?, which is a member that returns true if and only if the datatype value has been constructed using C. For every named parameter p of a constructor C, Dafny defines a destructor p, which is a member that returns the p parameter from the C call used to construct the datatype value; its use requires that C? holds. For example, for the standard List type

datatype List<T> = Nil | Cons(head: T, tail: List<T>)

the following holds:

Cons(5, Nil).Cons? && Cons(5, Nil).head == 5

Note that the expression

Cons(5, Nil).tail.head

is not well-formed, since Cons(5, Nil).tail does not satisfy Cons?.

The names of the destructors must be unique across all the constructors of the datatype. A constructor can have the same name as the enclosing datatype; this is especially useful for single-constructor datatypes, which are often called record types. For example, a record type for black-and-white pixels might be represented as follows:

datatype Pixel = Pixel(x: int, y: int, on: bool)

To call a constructor, it is usually necessary only to mention the name of the constructor, but if this is ambiguous, it is always possible to qualify the name of constructor by the name of the datatype. For example, Cons(5, Nil) above can be written

List.Cons(5, List.Nil)

As an alternative to calling a datatype constructor explicitly, a datatype value can be constructed as a change in one parameter from a given datatype value using the datatype update expression. For any d whose type is a datatype that includes a constructor C that has a parameter (destructor) named f of type T, and any expression t of type T,

d[f := t]

constructs a value like d but whose f parameter is t. The operation requires that d satisfies C?. For example, the following equality holds:

Cons(4, Nil)[tail := Cons(3, Nil)] == Cons(4, Cons(3, Nil))

The datatype update expression also accepts multiple field names, provided these are distinct. For example, a node of some inductive datatype for trees may be updated as follows:

node[left := L, right := R]

18.1. Tuple types

TupleType_ = "(" [ Type { "," Type } ] ")" 

Dafny builds in record types that correspond to tuples and gives these a convenient special syntax, namely parentheses. For example, what might have been declared as:

datatype Pair<T,U> = Pair(0: T, 1: U)

Dafny provides as the type (T, U) and the constructor (t, u), as if the datatype's name were “” and its type arguments are given in round parentheses, and as if the constructor name were “”. Note that the destructor names are 0 and 1, which are legal identifier names for members. For example, showing the use of a tuple destructor, here is a property that holds of 2-tuples (that is, pairs):

(5, true).1 == true

Dafny declares n-tuples where n is 0 or 2 or up. There are no 1-tuples, since parentheses around a single type or a single value have no semantic meaning. The 0-tuple type, (), is often known as the unit type and its single value, also written (), is known as unit.

18.2. Co-inductive datatypes

CoinductiveDatatypeDecl_ = "codatatype" { Attribute } DatatypeName [ GenericParameters ]
  "=" DatatypeMemberDecl { "|" DatatypeMemberDecl } [ ";" ] 

Whereas Dafny insists that there is a way to construct every inductive datatype value from the ground up, Dafny also supports co-inductive datatypes, whose constructors are evaluated lazily and hence allows infinite structures. A co-inductive datatype is declared using the keyword codatatype; other than that, it is declared and used like an inductive datatype.

For example,

codatatype IList<T> = Nil | Cons(head: T, tail: IList<T>)
codatatype Stream<T> = More(head: T, tail: Stream<T>)
codatatype Tree<T> = Node(left: Tree<T>, value: T, right: Tree<T>)

declare possibly infinite lists (that is, lists that can be either finite or infinite), infinite streams (that is, lists that are always infinite), and infinite binary trees (that is, trees where every branch goes on forever), respectively.

The paper Co-induction Simply, by Leino and Moskal[20], explains Dafny's implementation and verification of co-inductive types. We capture the key features from that paper in this section but the reader is referred to that paper for more complete details and to supply bibliographic references that we have omitted.

Mathematical induction is a cornerstone of programming and program verification. It arises in data definitions (e.g., some algebraic data structures can be described using induction), it underlies program semantics (e.g., it explains how to reason about finite iteration and recursion), and it gets used in proofs (e.g., supporting lemmas about data structures use inductive proofs). Whereas induction deals with finite things (data, behavior, etc.), its dual, co-induction, deals with possibly infinite things. Co-induction, too, is important in programming and program verification, where it arises in data definitions (e.g., lazy data structures), semantics (e.g., concurrency), and proofs (e.g., showing refinement in a co-inductive big-step semantics). It is thus desirable to have good support for both induction and co-induction in a system for constructing and reasoning about programs.

Co-datatypes and co-recursive functions make it possible to use lazily evaluated data structures (like in Haskell or Agda). Co-predicates, defined by greatest fix-points, let programs state properties of such data structures (as can also be done in, for example, Coq). For the purpose of writing co-inductive proofs in the language, we introduce co-lemmas. Ostensibly, a co-lemma invokes the co-induction hypothesis much like an inductive proof invokes the induction hypothesis. Underneath the hood, our co-inductive proofs are actually approached via induction: co-lemmas provide a syntactic veneer around this approach.

The following example gives a taste of how the co-inductive features in Dafny come together to give straightforward definitions of infinite matters.

// infinite streams
codatatype IStream<T> = ICons(head: T, tail: IStream)

// pointwise product of streams
function Mult(a: IStream<int>, b: IStream<int>): IStream<int>
{ ICons(a.head * b.head, Mult(a.tail, b.tail)) }

// lexicographic order on streams
copredicate Below(a: IStream<int>, b: IStream<int>)
{ a.head <= b.head && ((a.head == b.head) ==> Below(a.tail, b.tail)) }

// a stream is Below its Square
colemma Theorem_BelowSquare(a: IStream<int>)
ensures Below(a, Mult(a, a))
{ assert a.head <= Mult(a, a).head;
  if a.head == Mult(a, a).head { 
    Theorem_BelowSquare(a.tail);
  }
}

// an incorrect property and a bogus proof attempt
colemma NotATheorem_SquareBelow(a: IStream<int>)
  ensures Below(Mult(a, a), a); // ERROR
{
  NotATheorem_SquareBelow(a);
}

It defines a type IStream of infinite streams, with constructor ICons and destructors head and tail. Function Mult performs pointwise multiplication on infinite streams of integers, defined using a co-recursive call (which is evaluated lazily). Co-predicate Below is defined as a greatest fix-point, which intuitively means that the co-predicate will take on the value true if the recursion goes on forever without determining a different value. The co-lemma states the theorem Below(a, Mult(a, a)). Its body gives the proof, where the recursive invocation of the co-lemma corresponds to an invocation of the co-induction hypothesis.

The proof of the theorem stated by the first co-lemma lends itself to the following intuitive reading: To prove that a is below Mult(a, a), check that their heads are ordered and, if the heads are equal, also prove that the tails are ordered. The second co-lemma states a property that does not always hold; the verifier is not fooled by the bogus proof attempt and instead reports the property as unproved.

We argue that these definitions in Dafny are simple enough to level the playing field between induction (which is familiar) and co-induction (which, despite being the dual of induction, is often perceived as eerily mysterious). Moreover, the automation provided by our SMT-based verifier reduces the tedium in writing co-inductive proofs. For example, it verifies Theorem_BelowSquare from the program text given above— no additional lemmas or tactics are needed. In fact, as a consequence of the automatic-induction heuristic in Dafny, the verifier will automatically verify Theorem_BelowSquare even given an empty body.

Just like there are restrictions on when an inductive hypothesis can be invoked, there are restriction on how a co-inductive hypothesis can be used. These are, of course, taken into consideration by our verifier. For example, as illustrated by the second co-lemma above, invoking the co-inductive hypothesis in an attempt to obtain the entire proof goal is futile. (We explain how this works in section 18.2.4.1) Our initial experience with co-induction in Dafny shows it to provide an intuitive, low-overhead user experience that compares favorably to even the best of today’s interactive proof assistants for co-induction. In addition, the co-inductive features and verification support in Dafny have other potential benefits. The features are a stepping stone for verifying functional lazy programs with Dafny. Co-inductive features have also shown to be useful in defining language semantics, as needed to verify the correctness of a compiler, so this opens the possibility that such verifications can benefit from SMT automation.

18.2.0. Well-Founded Function/Method Definitions

The Dafny programming language supports functions and methods. A function in Dafny is a mathematical function (i.e., it is well-defined, deterministic, and pure), whereas a method is a body of statements that can mutate the state of the program. A function is defined by its given body, which is an expression. To ensure that function definitions are mathematically consistent, Dafny insists that recursive calls be well-founded, enforced as follows: Dafny computes the call graph of functions. The strongly connected components within it are clusters of mutually recursive definitions arranged in a DAG. This stratifies the functions so that a call from one cluster in the DAG to a lower cluster is allowed arbitrarily. For an intra-cluster call, Dafny prescribes a proof obligation that gets taken through the program verifier’s reasoning engine. Semantically, each function activation is labeled by a rank—a lexicographic tuple determined by evaluating the function’s decreases clause upon invocation of the function. The proof obligation for an intra-cluster call is thus that the rank of the callee is strictly less (in a language-defined well-founded relation) than the rank of the caller. Because these well-founded checks correspond to proving termination of executable code, we will often refer to them as “termination checks”. The same process applies to methods.

Lemmas in Dafny are commonly introduced by declaring a method, stating the property of the lemma in the postcondition (keyword ensures) of the method, perhaps restricting the domain of the lemma by also giving a precondition (keyword requires), and using the lemma by invoking the method. Lemmas are stated, used, and proved as methods, but since they have no use at run time, such lemma methods are typically declared as ghost, meaning that they are not compiled into code. The keyword lemma introduces such a method. Control flow statements correspond to proof techniques—case splits are introduced with if statements, recursion and loops are used for induction, and method calls for structuring the proof. Additionally, the statement:

forall x | P(x) { Lemma(x); }

is used to invoke Lemma(x) on all x for which P(x) holds. If Lemma(x) ensures Q(x), then the forall statement establishes

forall x :: P(x) ==> Q(x).

18.2.1. Defining Co-inductive Datatypes

Each value of an inductive datatype is finite, in the sense that it can be constructed by a finite number of calls to datatype constructors. In contrast, values of a co-inductive datatype, or co-datatype for short, can be infinite. For example, a co-datatype can be used to represent infinite trees.

Syntactically, the declaration of a co-datatype in Dafny looks like that of a datatype, giving prominence to the constructors (following Coq). The following example defines a co-datatype Stream of possibly infinite lists.

codatatype Stream<T> = SNil | SCons(head: T, tail: Stream)
function Up(n: int): Stream<int> { SCons(n, Up(n+1)) }
function FivesUp(n: int): Stream<int>
  decreases 4 - (n - 1) % 5
{ 
  if (n % 5 == 0) then
    SCons(n, FivesUp(n+1))
  else
    FivesUp(n+1)
}

Stream is a co-inductive datatype whose values are possibly infinite lists. Function Up returns a stream consisting of all integers upwards of n and FivesUp returns a stream consisting of all multiples of 5 upwards of n . The self-call in Up and the first self-call in FivesUp sit in productive positions and are therefore classified as co-recursive calls, exempt from termination checks. The second self-call in FivesUp is not in a productive position and is therefore subject to termination checking; in particular, each recursive call must decrease the rank defined by the decreases clause.

Analogous to the common finite list datatype, Stream declares two constructors, SNil and SCons. Values can be destructed using match expressions and statements. In addition, like for inductive datatypes, each constructor C automatically gives rise to a discriminator C? and each parameter of a constructor can be named in order to introduce a corresponding destructor. For example, if xs is the stream SCons(x, ys), then xs.SCons? and xs.head == x hold. In contrast to datatype declarations, there is no grounding check for co-datatypes—since a codatatype admits infinite values, the type is nevertheless inhabited.

18.2.2. Creating Values of Co-datatypes

To define values of co-datatypes, one could imagine a “co-function” language feature: the body of a “co-function” could include possibly never-ending self-calls that are interpreted by a greatest fix-point semantics (akin to a CoFixpoint in Coq). Dafny uses a different design: it offers only functions (not “co-functions”), but it classifies each intra-cluster call as either recursive or co-recursive. Recursive calls are subject to termination checks. Co-recursive calls may be never-ending, which is what is needed to define infinite values of a co-datatype. For example, function Up(n ) in the preceding example is defined as the stream of numbers from n upward: it returns a stream that starts with n and continues as the co-recursive call Up(n + 1).

To ensure that co-recursive calls give rise to mathematically consistent definitions, they must occur only in productive positions. This says that it must be possible to determine each successive piece of a co-datatype value after a finite amount of work. This condition is satisfied if every co-recursive call is syntactically guarded by a constructor of a co-datatype, which is the criterion Dafny uses to classify intra-cluster calls as being either co-recursive or recursive. Calls that are classified as co-recursive are exempt from termination checks.

A consequence of the productivity checks and termination checks is that, even in the absence of talking about least or greatest fix-points of self-calling functions, all functions in Dafny are deterministic. Since there is no issue of several possible fix-points, the language allows one function to be involved in both recursive and co-recursive calls, as we illustrate by the function FivesUp.

18.2.3. Copredicates

Determining properties of co-datatype values may require an infinite number of observations. To that avail, Dafny provides co-predicates which are function declarations that use the copredicate keyword. Self-calls to a co-predicate need not terminate. Instead, the value defined is the greatest fix-point of the given recurrence equations. Continuing the preceding example, the following code defines a co-predicate that holds for exactly those streams whose payload consists solely of positive integers. The co-predicate definition implicitly also gives rise to a corresponding prefix predicate, Pos#. The syntax for calling a prefix predicate sets apart the argument that specifies the prefix length, as shown in the last line; for this figure, we took the liberty of making up a coordinating syntax for the signature of the automatically generated prefix predicate (which is not part of Dafny syntax).

copredicate Pos(s: Stream<int>)
{
  match s
  case SNil => true
  case SCons(x, rest) => x > 0 && Pos(rest)
}
// Automatically generated by the Dafny compiler:
predicate Pos#[_k: nat](s: Stream<int>)
  decreases _k
{ if _k = 0 then true else
  match s
  case SNil => true
  case SCons(x, rest) => x > 0 && Pos#[_k-1](rest) 
}

Some restrictions apply. To guarantee that the greatest fix-point always exists, the (implicit functor defining the) co-predicate must be monotonic. This is enforced by a syntactic restriction on the form of the body of co-predicates: after conversion to negation normal form (i.e., pushing negations down to the atoms), intra-cluster calls of co-predicates must appear only in positive positions—that is, they must appear as atoms and must not be negated. Additionally, to guarantee soundness later on, we require that they appear in co-friendly positions—that is, in negation normal form, when they appear under existential quantification, the quantification needs to be limited to a finite range8. Since the evaluation of a co-predicate might not terminate, co-predicates are always ghost. There is also a restriction on the call graph that a cluster containing a co-predicate must contain only co-predicates, no other kinds of functions.

A copredicate declaration of P defines not just a co-predicate, but also a corresponding prefix predicate P#. A prefix predicate is a finite unrolling of a co-predicate. The prefix predicate is constructed from the co-predicate by

For example, for co-predicate Pos, the definition of the prefix predicate Pos# is as suggested above. Syntactically, the prefix-length argument passed to a prefix predicate to indicate how many times to unroll the definition is written in square brackets, as in Pos#[k](s). In the Dafny grammar this is called a HashCall. The definition of Pos# is available only at clusters strictly higher than that of Pos; that is, Pos and Pos# must not be in the same cluster. In other words, the definition of Pos cannot depend on Pos#.

18.2.3.0. Co-Equality

Equality between two values of a co-datatype is a built-in co-predicate. It has the usual equality syntax s == t, and the corresponding prefix equality is written s ==#[k] t. And similarly for s != t and s !=#[k] t.

18.2.4. Co-inductive Proofs

From what we have said so far, a program can make use of properties of co-datatypes. For example, a method that declares Pos(s) as a precondition can rely on the stream s containing only positive integers. In this section, we consider how such properties are established in the first place.

18.2.4.0. Properties About Prefix Predicates

Among other possible strategies for establishing co-inductive properties we take the time-honored approach of reducing co-induction to induction. More precisely, Dafny passes to the SMT solver an assumption D(P) for every co-predicate P, where:

D(P) = ? x • P(x) <==> ? k • P#[k](x)

In other words, a co-predicate is true iff its corresponding prefix predicate is true for all finite unrollings.

In Sec. 4 of the paper Co-induction Simply a soundness theorem of such assumptions is given, provided the co-predicates meet the co-friendly restrictions. An example proof of Pos(Up(n)) for every n > 0 is here shown:

lemma UpPosLemma(n: int)
  requires n > 0
  ensures Pos(Up(n))
{
  forall k | 0 <= k { UpPosLemmaK(k, n); } 
}

lemma UpPosLemmaK(k: nat, n: int)
  requires n > 0
  ensures Pos#[k](Up(n))
  decreases k
{ 
  if k != 0 {
    // this establishes Pos#[k-1](Up(n).tail)
    UpPosLemmaK(k-1, n+1);
  }
}

The lemma UpPosLemma proves Pos(Up(n)) for every n > 0. We first show Pos#[k](Up(n )), for n > 0 and an arbitrary k, and then use the forall statement to show ? k • Pos#[k](Up(n)). Finally, the axiom D(Pos) is used (automatically) to establish the co-predicate.

18.2.4.1. Colemmas

As we just showed, with help of the D axiom we can now prove a co-predicate by inductively proving that the corresponding prefix predicate holds for all prefix lengths k . In this section, we introduce co-lemma declarations, which bring about two benefits. The first benefit is that co-lemmas are syntactic sugar and reduce the tedium of having to write explicit quantifications over k . The second benefit is that, in simple cases, the bodies of co-lemmas can be understood as co-inductive proofs directly. As an example consider the following co-lemma.

colemma UpPosLemma(n: int)
  requires n > 0
  ensures Pos(Up(n))
{ 
  UpPosLemma(n+1);
}

This co-lemma can be understood as follows: UpPosLemma invokes itself co-recursively to obtain the proof for Pos(Up(n).tail) (since Up(n).tail equals Up(n+1)). The proof glue needed to then conclude Pos(Up(n)) is provided automatically, thanks to the power of the SMT-based verifier.

18.2.4.2. Prefix Lemmas

To understand why the above UpPosLemma co-lemma code is a sound proof, let us now describe the details of the desugaring of co-lemmas. In analogy to how a copredicate declaration defines both a co-predicate and a prefix predicate, a colemma declaration defines both a co-lemma and prefix lemma. In the call graph, the cluster containing a co-lemma must contain only co-lemmas and prefix lemmas, no other methods or function. By decree, a co-lemma and its corresponding prefix lemma are always placed in the same cluster. Both co-lemmas and prefix lemmas are always ghosts.

The prefix lemma is constructed from the co-lemma by

Note that this rewriting removes all co-recursive calls of co-lemmas, replacing them with recursive calls to prefix lemmas. These recursive call are, as usual, checked to be terminating. We allow the pre-declared identifier _k to appear in the original body of the co-lemma.9

We can now think of the body of the co-lemma as being replaced by a forall call, for every k , to the prefix lemma. By construction, this new body will establish the colemma’s declared postcondition (on account of the D axiom, and remembering that only the positive co-friendly occurrences of co-predicates in the co-lemma’s postcondition are rewritten), so there is no reason for the program verifier to check it.

The actual desugaring of our co-lemma UpPosLemma is in fact the previous code for the UpPosLemma lemma except that UpPosLemmaK is named UpPosLemma# and modulo a minor syntactic difference in how the k argument is passed.

In the recursive call of the prefix lemma, there is a proof obligation that the prefixlength argument _k - 1 is a natural number. Conveniently, this follows from the fact that the body has been wrapped in an if _k != 0 statement. This also means that the postcondition must hold trivially when _k = 0, or else a postcondition violation will be reported. This is an appropriate design for our desugaring, because co-lemmas are expected to be used to establish co-predicates, whose corresponding prefix predicates hold trivially when _k = 0. (To prove other predicates, use an ordinary lemma, not a co-lemma.)

It is interesting to compare the intuitive understanding of the co-inductive proof in using a co-lemma with the inductive proof in using the lemma. Whereas the inductive proof is performing proofs for deeper and deeper equalities, the co-lemma can be understood as producing the infinite proof on demand.

19. Newtypes

NewtypeDecl = "newtype" { Attribute } NewtypeName "="  
  ( NumericTypeName [ ":" Type ] "|" Expression(allowLemma: false, allowLambda: true)
  | Type               
  ) 

A new numeric type can be declared with the newtype declaration10, for example:

newtype N = x: M | Q

where M is a numeric type and Q is a boolean expression that can use x as a free variable. If M is an integer-based numeric type, then so is N; if M is real-based, then so is N. If the type M can be inferred from Q, the “: M” can be omitted. If Q is just true, then the declaration can be given simply as:

newtype N = M

Type M is known as the base type of N.

A newtype is a numeric type that supports the same operations as its base type. The newtype is distinct from and incompatible with other numeric types; in particular, it is not assignable to its base type without an explicit conversion. An important difference between the operations on a newtype and the operations on its base type is that the newtype operations are defined only if the result satisfies the predicate Q, and likewise for the literals of the newtype.11

For example, suppose lo and hi are integer-based numerics that satisfy 0 <= lo <= hi and consider the following code fragment:

var mid := (lo + hi) / 2;

If lo and hi have type int, then the code fragment is legal; in particular, it never overflows, since int has no upper bound. In contrast, if lo and hi are variables of a newtype int32 declared as follows:

newtype int32 = x | -0x80000000 <= x < 0x80000000

then the code fragment is erroneous, since the result of the addition may fail to satisfy the predicate in the definition of int32. The code fragment can be rewritten as

var mid := lo + (hi - lo) / 2;

in which case it is legal for both int and int32.

Since a newtype is incompatible with its base type and since all results of the newtype's operations are members of the newtype, a compiler for Dafny is free to specialize the run-time representation of the newtype. For example, by scrutinizing the definition of int32 above, a compiler may decide to store int32 values using signed 32-bit integers in the target hardware.

Note that the bound variable x in Q has type M, not N. Consequently, it may not be possible to state Q about the N value. For example, consider the following type of 8-bit 2's complement integers:

newtype int8 = x: int | -128 <= x < 128

and consider a variable c of type int8. The expression

-128 <= c < 128

is not well-defined, because the comparisons require each operand to have type int8, which means the literal 128 is checked to be of type int8, which it is not. A proper way to write this expression would be to use a conversion operation, described next, on c to convert it to the base type:

-128 <= int(c) < 128

If possible Dafny will represent values of the newtype using a native data type for the sake of efficiency. This action can be inhibited or a specific native data type selected by using the (:nativeType) attribute, as explained in section 24.1.11.

There is a restriction that the value 0 must be part of every newtype.12

19.0. Numeric conversion operations

For every numeric type N, there is a conversion function with the same name. It is a partial identity function. It is defined when the given value, which can be of any numeric type, is a member of the type converted to. When the conversion is from a real-based numeric type to an integer-based numeric type, the operation requires that the real-based argument has no fractional part. (To round a real-based numeric value down to the nearest integer, use the .Trunc member, see Section 6.1.)

To illustrate using the example from above, if lo and hi have type int32, then the code fragment can legally be written as follows:

var mid := (int(lo) + int(hi)) / 2;

where the type of mid is inferred to be int. Since the result value of the division is a member of type int32, one can introduce yet another conversion operation to make the type of mid be int32:

var mid := int32((int(lo) + int(hi)) / 2);

If the compiler does specialize the run-time representation for int32, then these statements come at the expense of two, respectively three, run-time conversions.

20. Subset types

NatType_ = "nat" 

A subset type is a restricted use of an existing type, called the base type of the subset type. A subset type is like a combined use of the base type and a predicate on the base type.

An assignment from a subset type to its base type is always allowed. An assignment in the other direction, from the base type to a subset type, is allowed provided the value assigned does indeed satisfy the predicate of the subset type. (Note, in contrast, assignments between a newtype and its base type are never allowed, even if the value assigned is a value of the target type. For such assignments, an explicit conversion must be used, see Section 19.0.)

Dafny supports one subset type, namely the built-in type nat, whose base type is int.13 Type nat designates the non-negative subrange of int. A simple example that puts subset type nat to good use is the standard Fibonacci function:

function Fib(n: nat): nat
{
  if n < 2 then n else Fib(n-2) + Fib(n-1)
}

An equivalent, but clumsy, formulation of this function (modulo the wording of any error messages produced at call sites) would be to use type int and to write the restricting predicate in pre- and postconditions:

function Fib(n: int): int
  requires 0 <= n;  // the function argument must be non-negative
  ensures 0 <= Fib(n);  // the function result is non-negative
{
  if n < 2 then n else Fib(n-2) + Fib(n-1)
}

Type inference will never infer the type of a variable to be a subset type. It will instead infer the type to be the base type of the subset type. For example, the type of x in

forall x :: P(x)

will be int, even if predicate P declares its argument to have type nat.

21. Statements

Stmt = ( BlockStmt | AssertStmt | AssumeStmt | PrintStmt | UpdateStmt
  | VarDeclStatement | IfStmt | WhileStmt | MatchStmt | ForallStmt
  | CalcStmt | ModifyStmt | LabeledStmt_ | BreakStmt_ | ReturnStmt
  | YieldStmt | SkeletonStmt
  ) 

Many of Dafny's statements are similar to those in traditional programming languages, but a number of them are significantly different. This grammar production shows the different kinds of Dafny statements. They are described in subsequent sections.

21.0. Labeled Statement

LabeledStmt_ = "label" LabelName ":" Stmt 

A labeled statement is just the keyword label followed by and identifier which is the label followed by a colon and a statement. The label may be referenced in a break statement to transfer control to the location after that statement.

21.1. Break Statement

BreakStmt_ = "break" ( LabelName | { "break" } ) ";" 

A break statement breaks out of one or more loops (if the statement consists solely of one or more break keywords), or else transfers control to just past the statement bearing the referenced label, if a label was used.

21.2. Block Statement

BlockStmt = "{" { Stmt } "}" 

A block statement is just a sequence of statements enclosed by curly braces.

21.3. Return Statement

ReturnStmt = "return" [ Rhs { "," Rhs } ] ";" 

A return statement can only be used in a method. It is used to terminate the execution of the method. To return a value from a method, the value is assigned to one of the named return values sometime before a return statement. In fact, the return values act very much like local variables, and can be assigned to more than once. Return statements are used when one wants to return before reaching the end of the body block of the method. Return statements can be just the return keyword (where the current value of the out parameters are used), or they can take a list of values to return. If a list is given the number of values given must be the same as the number of named return values.

21.4. Yield Statement

YieldStmt = "yield" [ Rhs { "," Rhs } ] ";" 

A yield statement can only be used in an iterator. See section Iterator types for more details about iterators.

The body of an iterator is a co-routine. It is used to yield control to its caller, signaling that a new set of values for the iterator's yield parameters (if any) are available. Values are assigned to the yield parameters at or before a yield statement. In fact, the yield parameters act very much like local variables, and can be assigned to more than once. Yield statements are used when one wants to return new yield parameter values to the caller. Yield statements can be just the yield keyword (where the current value of the yield parameters are used), or they can take a list of values to yield. If a list is given the number of values given must be the same as the number of named return yield parameters.

21.5. Update Statement

UpdateStmt = Lhs { "," Lhs } 
    ( ":=" Rhs { "," Rhs }
    | ":|" [ "assume" ] Expression(allowLemma: false, allowLambda: true)
    )
    ";""

The update statement has two forms. The first more normal form allows for parallel assignment of right-hand-side values to the left-hand side. For example x,y := y,x to swap the values of x and y. Of course the common case will have only one rhs and one lhs.

The form that uses “:|” assigns some values to the left-hand-side variables such that the boolean expression on the right hand side is satisfied. This can be used to make a choice as in the following example where we choose an element in a set.

function PickOne<T>(s: set<T>): T
  requires s != {}
{
  var x :| x in s; x
}

Dafny will report an error if it cannot prove that values exist which satisfy the condition.

In addition, though the choice is arbitrary, given identical circumstances the choice will be made consistently.

In the actual grammar two additional forms are recognized for purposes of error detection. The form:

Lhs { Attribute} ;

is assumed to be a mal-formed call.

The form

Lhs ":"

is diagnosed as a label in which the user forgot the label keyword.

21.6. Variable Declaration Statement

VarDeclStatement = [ "ghost" ] "var" { Attribute }
  (
    LocalIdentTypeOptional { "," { Attribute } LocalIdentTypeOptional }
    [ ":=" Rhs { "," Rhs }
    | { Attribute } ":|" [ "assume" ] Expression(allowLemma: false, allowLambda: true)
    ]
  |
    "(" CasePattern { "," CasePattern } ")"
    ":=" Expression(allowLemma: false, allowLambda: true)
  )
  ";"

A VarDeclStatement is used to declare one or more local variables in a method or function. The type of each local variable must be given unless the variable is given an initial value in which case the type will be inferred. If initial values are given, the number of values must match the number of variables declared.

Note that the type of each variable must be given individually. The following code

var x, y : int;

does not declare both x and y to be of type int. Rather it will give an error explaining that the type of x is underspecified.

The lefthand side can also contain a tuple of patterns which will be matched against the right-hand-side. For example:

function returnsTuple() : (int, int)
{
    (5, 10)
}

function usesTuple() : int
{
    var (x, y) := returnsTuple();
    x + y
}

21.7. Guards

Guard = ( "*" | "(" "*" ")" | Expression(allowLemma: true, allowLambda: true) ) 

Guards are used in if and while statements as boolean expressions. Guards take two forms.

The first and most common form is just a boolean expression.

The second form is either * or (*). These have the same meaning. An unspecified boolean value is returned. The value returned may be different each time it is executed.

21.8. Binding Guards

BindingGuard(allowLambda) =
  IdentTypeOptional { "," IdentTypeOptional } { Attribute }
  ":|" Expression(allowLemma: true, allowLambda)

A BindingGuard is used as a condition in an IfStmt. It binds the identifiers declared in the IdentTypeOptionals. If there exists one or more assignments of values to the bound identifiers for which Expression is true, then the BindingGuard returns true and the identifiers are bound to values that make the Expression true.

The identifiers bound by BindingGuard are ghost variables and cannot be assigned to non-ghost variables. They are only used in specification contexts.

Here is an example:

predicate P(n: int)
{
  n % 2 == 0
}

method M1() returns (ghost y: int)
    requires x :: P(x)
    ensures P(y)
{
  if x : int :| P(x) {
      y := x;
  }
}

21.9. If Statement

IfStmt = "if"
  ( IfAlternativeBlock
  | 
    ( BindingGuard(allowLambda: true)
    | Guard 
    | "…" 
    ) 
    BlockStmt [ "else" ( IfStmt | BlockStmt ) ]
  ) 

In the simplest form an if statement uses a guard that is a boolean expression. It then has the same form as in C# and other common programming languages. For example

  if x < 0 {
    x := -x;
  } 

If the guard is an asterisk then a non-deterministic choice is made:

  if * {
    print "True";
  } else {
    print "False";
  }
IfAlternativeBlock =
   "{" { "case" 
      (
        BindingGuard(allowLambda:false)
      | Expression(allowLemma: true, allowLambda: false)
      ) "=>" { Stmt } } "}" .

The if statement using the IfAlternativeBlock form is similar to the if ... fi construct used in the book “A Discipline of Programming” by Edsger W. Dijkstra. It is used for a multi-branch if.

For example:

  if {
    case x <= y => max := y;
    case y <= x => max := y;
  }

In this form the expressions following the case keyword are called guards. The statement is evaluated by evaluating the guards in an undetermined order until one is found that is true or else all have evaluated to false. If none of them evaluate to true then the if statement does nothing. Otherwise the statements to the right of => for the guard that evaluated to true are executed.

21.10. While Statement

WhileStmt = "while"
  ( LoopSpecWhile WhileAlternativeBlock
  | ( Guard | "…" ) LoopSpec
      ( BlockStmt
      | "…"
      | /* go body-less */
      )
  ) 
WhileAlternativeBlock =
   "{" { "case" Expression(allowLemma: true, allowLambda: false) "=>" { Stmt } } "}" .

See section 4.5 for a description of LoopSpec.

The while statement is Dafny's only loop statement. It has two general forms.

The first form is similar to a while loop in a C-like language. For example:

  var i := 0;
  while i < 5 {
    i := i + 1;
  }

In this form the condition following the while is one of these:

The body of the loop is usually a block statement, but it can also be a skeleton, denoted by ellipsis, or missing altogether. TODO: Wouldn't a missing body cause problems? Isn't it clearer to have a block statement with no statements inside?

The second form uses the WhileAlternativeBlock. It is similar to the do ... od construct used in the book “A Discipline of Programming” by Edsger W. Dijkstra. For example:

  while
    decreases if 0 <= r then r else -r;
  {
    case r < 0 =>
      r := r + 1;
    case 0 < r =>
      r := r - 1;
  }

For this form the guards are evaluated in some undetermined order until one is found that is true, in which case the corresponding statements are executed. If none of the guards evaluates to true then the loop execution is terminated.

21.10.0. Loop Specifications

For some simple loops such as those mentioned previously Dafny can figure out what the loop is doing without more help. However in general the user must provide more information in order to help Dafny prove the effect of the loop. This information is provided by a LoopSpec. A LoopSpec provides information about invariants, termination, and what the loop modifies. LoopSpecs are explained in section 4.5. However the following sections present additional rationale and tutorial on loop specifications.

21.10.0.0. Loop Invariants

While loops present a problem for Dafny. There is no way for Dafny to know in advance how many times the code will go around the loop. But Dafny needs to consider all paths through a program, which could include going around the loop any number of times. To make it possible for Dafny to work with loops, you need to provide loop invariants, another kind of annotation.

A loop invariant is an expression that holds upon entering a loop, and after every execution of the loop body. It captures something that is invariant, i.e. does not change, about every step of the loop. Now, obviously we are going to want to change variables, etc. each time around the loop, or we wouldn't need the loop. Like pre- and postconditions, an invariant is a property that is preserved for each execution of the loop, expressed using the same boolean expressions we have seen. For example,

var i := 0;
while i < n
  invariant 0 <= i
{
  i := i + 1;
}

When you specify an invariant, Dafny proves two things: the invariant holds upon entering the loop, and it is preserved by the loop. By preserved, we mean that assuming that the invariant holds at the beginning of the loop, we must show that executing the loop body once makes the invariant hold again. Dafny can only know upon analyzing the loop body what the invariants say, in addition to the loop guard (the loop condition). Just as Dafny will not discover properties of a method on its own, it will not know any but the most basic properties of a loop are preserved unless it is told via an invariant.

21.10.0.1. Loop Termination

Dafny proves that code terminates, i.e. does not loop forever, by using decreases annotations. For many things, Dafny is able to guess the right annotations, but sometimes it needs to be made explicit. In fact, for all of the code we have seen so far, Dafny has been able to do this proof on its own, which is why we haven't seen the decreases annotation explicitly yet. There are two places Dafny proves termination: loops and recursion. Both of these situations require either an explicit annotation or a correct guess by Dafny.

A decreases annotation, as its name suggests, gives Dafny an expression that decreases with every loop iteration or recursive call. There are two conditions that Dafny needs to verify when using a decreases expression:

Many times, an integral value (natural or plain integer) is the quantity that decreases, but other things that can be used as well. In the case of integers, the bound is assumed to be zero. For example, the following is a proper use of decreases on a loop (with its own keyword, of course):

  while 0 < i
    invariant 0 <= i
    decreases i
  {
    i := i - 1;
  }

Here Dafny has all the ingredients it needs to prove termination. The variable i gets smaller each loop iteration, and is bounded below by zero. This is fine, except the loop is backwards from most loops, which tend to count up instead of down. In this case, what decreases is not the counter itself, but rather the distance between the counter and the upper bound. A simple trick for dealing with this situation is given below:

  while i < n
    invariant 0 <= i <= n
    decreases n - i
  {
    i := i + 1;
  }

This is actually Dafny's guess for this situation, as it sees i < n and assumes that n - i is the quantity that decreases. The upper bound of the loop invariant implies that 0 <= n – i, and gives Dafny a lower bound on the quantity. This also works when the bound n is not constant, such as in the binary search algorithm, where two quantities approach each other, and neither is fixed.

If the decreases clause of a loop specified “*”, then no termination check will be performed. Use of this feature is sound only with respect to partial correctness.

21.10.0.2. Loop Framing

In some cases we also must specify what memory locations the loop body is allowed to modify. This is done using a modifies clause. See the discussion of framing in methods for a fuller discussion.

21.11. Match Statement

MatchStmt = "match" Expression(allowLemma: true, allowLambda: true)
  ( "{" { CaseStatement  } "}"
  | { CaseStatement }
  ) 

CaseStatement = CaseBinding_ "=>" { Stmt } 

The match statement is used to do case analysis on a value of inductive or co-inductive type. The form with no leading Ident is for matching tuples. The expression after the match keyword is the (co)inductive value being matched. The expression is evaluated and then matched against each of the case clauses.

There must be a case clause for each constructor of the data type. The identifier after the case keyword in a case clause, if present, must be the name of one of the data type's constructors. If the constructor takes parameters then a parenthesis-enclosed list of identifiers (with optional type) must follow the constructor. There must be as many identifiers as the constructor has parameters. If the optional type is given it must be the same as the type of the corresponding parameter of the constructor. If no type is given then the type of the corresponding parameter is the type assigned to the identifier.

When an inductive value that was created using constructor expression C1(v1, v2) is matched against a case clause C2(x1, x2), there is a match provided that C1 and C2 are the same constructor. In that case x1 is bound to value v1 and x2 is bound to v2. The identifiers in the case pattern are not mutable. Here is an example of the use of a match statement.

datatype Tree = Empty | Node(left: Tree, data: int, right: Tree)

// Return the sum of the data in a tree.
method Sum(x: Tree) returns (r: int)
{
  match x {
    case Empty => r := -1;
    case Node(t1 : Tree, d, t2) => {
      var v1 := Sum(t1);
      var v2 := Sum(t2);
      r := v1 + d + v2;
    }
 }
}

Note that the Sum method is recursive yet has no decreases annotation. In this case it is not needed because Dafny is able to deduce that t1 and t2 are smaller (structurally) than x. If Tree had been coinductive this would not have been possible since x might have been infinite.

21.12. Assert Statement

AssertStmt = 
    "assert" { Attribute } 
    ( Expression(allowLemma: false, allowLambda: true) 
    | "…" 
    ) ";" 

Assert statements are used to express logical proposition that are expected to be true. Dafny will attempt to prove that the assertion is true and give an error if not. Once it has proved the assertion it can then use its truth to aid in following deductions. Thus if Dafny is having a difficult time verifying a method the user may help by inserting assertions that Dafny can prove, and whose true may aid in the larger verification effort.

If the proposition is ... then (TODO: what does this mean?).

21.13. Assume Statement

AssumeStmt = 
    "assume" { Attribute } 
    ( Expression(allowLemma: false, allowLambda: true) 
    | "…" 
    ) ";" 

The Assume statement lets the user specify a logical proposition that Dafny may assume to be true without proof. If in fact the proposition is not true this may lead to invalid conclusions.

An Assume statement would ordinarily be used as part of a larger verification effort where verification of some other part of the program required the proposition. By using the Assume statement the other verification can proceed. Then when that is completed the user would come back and replace the assume with assert.

If the proposition is ... then (TODO: what does this mean?).

21.14. Print Statement

PrintStmt = 
    "print" Expression(allowLemma: false, allowLambda: true) 
    { "," Expression(allowLemma: false, allowLambda: true) } ";" 

The print statement is used to print the values of a comma-separated list of expressions to the console. The generated C# code uses the System.Object.ToString() method to convert the values to printable strings. The expressions may of course include strings that are used for captions. There is no implicit new line added, so to get a new line you should include “\n” as part of one of the expressions. Dafny automatically creates overrides for the ToString() method for Dafny data types. For example,

datatype Tree = Empty | Node(left: Tree, data: int, right: Tree)
method Main()
{
  var x : Tree := Node(Node(Empty, 1, Empty), 2, Empty);
  print "x=", x, "\n";
}

produces this output:

x=Tree.Node(Tree.Node(Tree.Empty, 1, Tree.Empty), 2, Tree.Empty)

21.15. Forall Statement

ForallStmt = "forall"
  ( "(" [ QuantifierDomain ] ")"
  | [ QuantifierDomain ]
  )
  { [ "free" ] ForAllEnsuresClause_ }
  [ BlockStmt ] 

The forall statement executes ensures expressions or a body in parallel for all quantified values in the specified range. The use of the parallel keyword is deprecated. Use forall instead. There are several variant uses of the forall statement. And there are a number of restrictions.

In particular a forall statement can be classified as one of the following:

An assign forall statement is to perform simultaneous assignment. The following is an excerpt of an example given by Leino in Developing Verified Programs with Dafny. When the buffer holding the queue needs to be resized, the forall statement is used to simultaneously copy the old contents into the new buffer.

class {:autocontracts} SimpleQueue<Data>
{
  ghost var Contents: seq<Data>;
  var a: array<Data>; // Buffer holding contents of queue.
  var m: int          // Index head of queue.
  var n: int;         // Index just past end of queue
  ...
  method Enqueue(d: Data)
    ensures Contents == old(Contents) + [d]
  {
    if n == a.Length {
      var b := a;
      if m == 0 { b := new Data[2 * a.Length]; }
      forall (i | 0 <= i < n - m) {
          b[i] := a[m + i];
      }
      a, m, n := b, 0, n - m;
    }
    a[n], n, Contents := d, n + 1, Contents + [d];
  }
}

Here is an example of a call forall statement and the callee. This is contained in the CloudMake-ConsistentBuilds.dfy test in the Dafny repository.

forall (cmd', deps', e' | Hash(Loc(cmd', deps', e')) == Hash(Loc(cmd, deps, e))) {
  HashProperty(cmd', deps', e', cmd, deps, e);
}

ghost method HashProperty(cmd: Expression, deps: Expression, ext: string, 
    cmd': Expression, deps': Expression, ext': string)
  requires Hash(Loc(cmd, deps, ext)) == Hash(Loc(cmd', deps', ext'))
  ensures cmd == cmd' && deps == deps' && ext == ext'

From the same file here is an example of a proof forall statement.

forall (p | p in DomSt(stCombinedC.st) && p in DomSt(stExecC.st))
  ensures GetSt(p, stCombinedC.st) == GetSt(p, stExecC.st)
{
  assert DomSt(stCombinedC.st) <= DomSt(stExecC.st);
  assert stCombinedC.st == Restrict(DomSt(stCombinedC.st), stExecC.st);
}

More generally the statement

forall x | P(x) { Lemma(x); }

is used to invoke Lemma(x) on all x for which P(x) holds. If Lemma(x) ensures Q(x), then the forall statement establishes

forall x :: P(x) ==> Q(x).

The forall statement is also used extensively in the desugared forms of co-predicates and co-lemmas. See section 18.2.

TODO: List all of the restrictions on the forall statement.

21.16. Modify Statement

ModifyStmt = 
  "modify" { Attribute } 
  ( FrameExpression(allowLemma: false, allowLambda: true) 
    { "," FrameExpression(allowLemma: false, allowLambda: true) } 
  | "…" 
  ) 
  ( BlockStmt | ";" ) 

The modify statement has two forms which have two different purposes.

When the modify statement ends with a semi-colon rather than a block statement its effect is to say that some undetermined modifications have been made to any or all of the memory locations specified by the frame expressions. In the following example, a value is assigned to field x followed by a modify statement that may modify any field in the object. After that we can no longer prove that the field x still has the value we assigned to it.

class MyClass {
  var x: int;
  method N()
    modifies this
  {
    x := 18;
    modify this;
    assert x == 18;  // error: cannot conclude this here
  }
}

When the modify statement is followed by a block statement we are instead specifying what can be modified in that block statement. Namely, only memory locations specified by the frame expressions of the block modify statement may be modified. Consider the following example.

class ModifyBody {
  var x: int;
  var y: int;
  method M0()
    modifies this
  {
    modify {} {
      x := 3;  // error: violates modifies clause of the modify statement
    }
  }
  method M1()
    modifies this
  {
    modify {} {
      var o := new ModifyBody;
      o.x := 3;  // fine
    }
  }
  method M2()
    modifies this
  {
    modify this {
      x := 3;
    }
  }
}

The first modify statement in the example has an empty frame expression so it cannot modify any memory locations. So an error is reported when it tries to modify field x.

The second modify statement also has an empty frame expression. But it allocates a new object and modifies it. Thus we see that the frame expressions on a block modify statement only limits what may be modified of existing memory. It does not limit what may be modified in new memory that is allocated.

The third modify statement has a frame expression that allows it to modify any of the fields of the current object, so the modification of field x is allowed.

21.17. Calc Statement

CalcStmt = "calc" { Attribute } [ CalcOp ] "{" CalcBody "}" 
CalcBody = { CalcLine [ CalcOp ] Hints } 
CalcLine = Expression(allowLemma: false, allowLambda: true) ";" 
Hints = { ( BlockStmt | CalcStmt ) } 
CalcOp =
  ( "==" [ "#" "[" Expression(allowLemma: true, allowLambda: true) "]" ]
  | "<" | ">" 
  | "!=" | "<=" | ">="
  | "<==>" | "==>" | "<=="
  ) 

The calc statement supports calculational proofs using a language feature called program-oriented calculations (poC). This feature was introduced and explained in the Verified Calculations paper by Leino and Polikarpova[22]. Please see that paper for a more complete explanation of the calc statement. We here mention only the highlights.

Calculational proofs are proofs by stepwise formula manipulation as is taught in elementary algebra. The typical example is to prove an equality by starting with a left-hand-side, and through a series of transformations morph it into the desired right-hand-side.

Non-syntactic rules further restrict hints to only ghost and side-effect free statements, as well as impose a constraint that only chain-compatible operators can be used together in a calculation. The notion of chain-compatibility is quite intuitive for the operators supported by poC; for example, it is clear that “<” and “>” cannot be used within the same calculation, as there would be no relation to conclude between the first and the last line. See the paper for a more formal treatment of chain-compatibility.

Note that we allow a single occurrence of the intransitive operator “!=” to appear in a chain of equalities (that is, “!=” is chain-compatible with equality but not with any other operator, including itself). Calculations with fewer than two lines are allowed, but have no effect. If a step operator is omitted, it defaults to the calculation-wide operator, defined after the calc keyword. If that operator if omitted, it defaults to equality.

Here is an example using calc statements to prove an elementary algebraic identity. As it turns out Dafny is able to prove this without the calc statements, but it helps to illustrate the syntax.

lemma docalc(x : int, y: int)
  ensures (x + y) * (x + y) == x * x + 2 * x * y + y * y
{
  calc {
    (x + y) * (x + y); ==
      // distributive law: (a + b) * c == a * c + b * c
      x * (x + y) + y * (x + y); ==
      // distributive law: a * (b + c) == a * b + a * c
      x * x + x * y + y * x + y * y; ==
      calc {
        y * x; ==
        x * y;
    }
      x * x + x * y + x * y + y * y; ==
      calc {
        x * y + x * y; ==
        // a = 1 * a
        1 * x * y + 1 * x * y; ==
        // Distributive law
        (1 + 1) * x * y; ==
        2 * x * y;
      }
      x * x + 2 * x * y + y * y;
  }
}

Here we started with (x + y) * (x + y) as the left-hand-side expressions and gradually transformed it using distributive, commutative and other laws into the desired right-hand-side.

The justification for the steps are given as comments, or as nested calc statements that prove equality of some sub-parts of the expression.

The == to the right of the semicolons show the relation between that expression and the next. Because of the transitivity of equality we can then conclude that the original left-hand-side is equal to the final expression.

We can avoid having to supply the relational operator between every pair of expressions by giving a default operator between the calc keyword and the opening brace as shown in this abbreviated version of the above calc statement:

calc == {
  (x + y) * (x + y);
  x * (x + y) + y * (x + y);
  x * x + x * y + y * x + y * y;
  x * x + x * y + x * y + y * y;
  x * x + 2 * x * y + y * y;
}

And since equality is the default operator we could have omitted it after the calc keyword. The purpose of the block statements or the calc statements between the expressions is to provide hints to aid Dafny in proving that step. As shown in the example, comments can also be used to aid the human reader in cases where Dafny can prove the step automatically.

21.18. Skeleton Statement

SkeletonStmt = 
  "…" 
  ["where" Ident {"," Ident } ":=" 
    Expression(allowLemma: false, allowLambda: true) 
    {"," Expression(allowLemma: false, allowLambda: true) } 
  ] ";" 

22. Expressions

The grammar of Dafny expressions follows a hierarchy that reflects the precedence of Dafny operators. The following table shows the Dafny operators and their precedence in order of increasing binding power.

operator description
; In LemmaCall;Expression
<==>, ⇔ equivalence (if and only if)
==>, ⇒ implication (implies)
<==, ⇐ reverse implication (follows from)
&&, ∧ conjunction (and)
||, ∨ disjunction (or)
!, ¬ negation (not)
== equality
==#[k] prefix equality (co-inductive)
!= disequality
!=#[k] prefix disequality (co-inductive)
< less than
<= at most
>= at least
> greater than
in collection membership
!in collection non-membership
!! disjointness
+ addition (plus)
- subtraction (minus)
* multiplication (times)
/ division (divided by)
% modulus (mod)
- arithmetic negation (unary minus)
!, ¬ logical negation
Primary Expressions

We are calling the UnaryExpressions that are neither arithmetic nor logical negation the primary expressions. They are the most tightly bound.

In the grammar entries below we explain the meaning when the operator for that precedence level is present. If the operator is not present then we just descend to the next precedence level.

22.0. Top-level expressions

Expression(allowLemma, allowLambda) = 
    EquivExpression(allowLemma, allowLambda)
    [ ";" Expression(allowLemma, allowLambda) ] 

The “allowLemma” argument says whether or not the expression to be parsed is allowed to have the form S;E where S is a call to a lemma. “allowLemma” should be passed in as “false” whenever the expression to be parsed sits in a context that itself is terminated by a semi-colon.

The “allowLambda” says whether or not the expression to be parsed is allowed to be a lambda expression. More precisely, an identifier or parenthesized-enclosed comma-delimited list of identifiers is allowed to continue as a lambda expression (that is, continue with a “reads”, “requires”, or “=>”) only if “allowLambda” is true. This affects function/method/iterator specifications, if/while statements with guarded alternatives, and expressions in the specification of a lambda expression itself.

Sometimes an expression will fail unless some relevant fact is known. In the following example the F_Fails function fails to verify because the Fact(n) divisor may be zero. But preceding the expression by a lemma that ensures that the denominator is not zero allows function F_Succeeds to succeed.

function Fact(n: nat): nat
{
  if n == 0 then 1 else n * Fact(n-1)
}

lemma L(n: nat)
  ensures 1 <= Fact(n)
{
}

function F_Fails(n: nat): int
{
  50 / Fact(n)  // error: possible division by zero
}

function F_Succeeds(n: nat): int
{
  L(n);
  50 / Fact(n)
}

22.1. Equivalence Expressions

EquivExpression(allowLemma, allowLambda) = 
  ImpliesExpliesExpression(allowLemma, allowLambda)
  { "<==>" ImpliesExpliesExpression(allowLemma, allowLambda) } 

An EquivExpression that contains one or more “<==>”s is a boolean expression and all the contained ImpliesExpliesExpression must also be boolean expressions. In that case each “<==>” operator tests for logical equality which is the same as ordinary equality.

See section 6.0.0 for an explanation of the <==> operator as compared with the == operator.

22.2. Implies or Explies Expressions

ImpliesExpliesExpression(allowLemma, allowLambda) =
  LogicalExpression(allowLemma, allowLambda)
  [ (  "==>" ImpliesExpression(allowLemma, allowLambda)
    | "<==" LogicalExpression(allowLemma, allowLambda)
            { "<==" LogicalExpression(allowLemma, allowLambda) }
    )
  ] 

ImpliesExpression(allowLemma, allowLambda) =
  LogicalExpression(allowLemma, allowLambda) 
  [  "==>" ImpliesExpression(allowLemma, allowLambda) ] 

See section 6.0.2 for an explanation of the ==> and <== operators.

22.3. Logical Expressions

LogicalExpression(allowLemma, allowLambda) =
  RelationalExpression(allowLemma, allowLambda)
  [ ( "&&" RelationalExpression(allowLemma, allowLambda)
           { "&&" RelationalExpression(allowLemma, allowLambda) }
    | "||" RelationalExpression(allowLemma, allowLambda)
           { "||" RelationalExpression(allowLemma, allowLambda) }
    )
  ] 

See section 6.0.1 for an explanation of the && (or ∧) and || (or ∨) operators.

22.4. Relational Expressions

RelationalExpression(allowLemma, allowLambda) =
  Term(allowLemma, allowLambda)
  [ RelOp Term(allowLemma, allowLambda)
          { RelOp Term(allowLemma, allowLambda) } ] 

RelOp =
  ( "==" [ "#" "[" Expression(allowLemma: true, allowLambda: true) "]" ]
  | "<" | ">" | "<=" | ">=" 
  | "!=" [ "#" "[" Expression(allowLemma: true, allowLambda: true) "]" ]
  | "in"
  | "!in"
  | "!!"
  )
  

The relation expressions that have a RelOp compare two or more terms. As explained in section 6, ==, !=, <, >, <=, and >= and their corresponding Unicode equivalents are chaining.

The in and !in operators apply to collection types as explained in section 9 and represent membership or non-membership respectively.

The !! represents disjointness for sets and multisets as explained in sections 9.0 and 9.1.

Note that x ==#[k] y is the prefix equality operator that compares co-inductive values for equality to a nesting level of k, as explained in section 18.2.3.0.

22.5. Terms

Term(allowLemma, allowLambda) =
  Factor(allowLemma, allowLambda)
  { AddOp Factor(allowLemma, allowLambda) } 
AddOp = ( "+" | "-" ) 

Terms combine Factors by adding or subtracting. Addition has these meanings for different types:

Subtraction is arithmetic subtraction for numeric types, and set or multiset difference for sets and multisets.

22.6. Factors

Factor(allowLemma, allowLambda) =
  UnaryExpression(allowLemma, allowLambda)
  { MulOp UnaryExpression(allowLemma, allowLambda) } 
MulOp = ( "*" | "/" | "%" ) 

A Factor combines UnaryExpressions using multiplication, division, or modulus. For numeric types these are explained in section 6.1.

Only * has a non-numeric application. It represents set or multiset intersection as explained in sections 9.0 and 9.1.

22.7. Unary Expressions

UnaryExpression(allowLemma, allowLambda) =
  ( "-" UnaryExpression(allowLemma, allowLambda)
  | "!" UnaryExpression(allowLemma, allowLambda)
  | PrimaryExpression_(allowLemma, allowLambda)
  )
  

A UnaryExpression applies either numeric (section 6.1) or logical (section 6.0) negation to its operand.

22.8. Primary Expressions

PrimaryExpression_(allowLemma, allowLambda) =
  ( MapDisplayExpr { Suffix }
  | LambdaExpression(allowLemma)
  | EndlessExpression(allowLemma, allowLambda)
  | NameSegment { Suffix }
  | SeqDisplayExpr { Suffix }
  | SetDisplayExpr { Suffix }
  | MultiSetExpr { Suffix }
  | ConstAtomExpression { Suffix }
  )
  

After descending through all the binary and unary operators we arrive at the primary expressions which are explained in subsequent sections. As can be seen, a number of these can be followed by 0 or more Suffixes to select a component of the value.

If the allowLambda is false then LambdaExpressions are not recognized in this context.

22.9. Lambda expressions

LambdaExpression(allowLemma) =
  ( WildIdent
  | "(" [ IdentTypeOptional { "," IdentTypeOptional } ] ")"
  )
  LambdaSpec_
  LambdaArrow Expression(allowLemma, allowLambda: true) 

LambdaArrow = ( "=>" | "->" ) 

See section 4.3 for a description of LambdaSpec.

In addition to named functions, Dafny supports expressions that define functions. These are called lambda (expression)s (some languages know them as anonymous functions). A lambda expression has the form:

(params) specification => body

where params is a comma-delimited list of parameter declarations, each of which has the form x or x: T. The type T of a parameter can be omitted when it can be inferred. If the identifier x is not needed, it can be replaced by “_”. If params consists of a single parameter x (or _) without an explicit type, then the parentheses can be dropped; for example, the function that returns the successor of a given integer can be written as the following lambda expression:

x => x + 1

The specification is a list of clauses requires E or reads W, where E is a boolean expression and W is a frame expression.

body is an expression that defines the function's return value. The body must be well-formed for all possible values of the parameters that satisfy the precondition (just like the bodies of named functions and methods). In some cases, this means it is necessary to write explicit requires and reads clauses. For example, the lambda expression

x requires x != 0 => 100 / x

would not be well-formed if the requires clause were omitted, because of the possibility of division-by-zero.

In settings where functions cannot be partial and there are no restrictions on reading the heap, the eta expansion of a function F: T -> U (that is, the wrapping of F inside a lambda expression in such a way that the lambda expression is equivalent to F) would be written x => F(x). In Dafny, eta expansion must also account for the precondition and reads set of the function, so the eta expansion of F looks like:

x requires F.requires(x) reads F.reads(x) => F(x)

22.10. Left-Hand-Side Expressions

Lhs =
  ( NameSegment { Suffix }
  | ConstAtomExpression Suffix { Suffix }
  ) 

A left-hand-side expression is only used on the left hand side of an UpdateStmt.

TODO: Try to give examples showing how these kinds of left-hand-sides are possible.

22.11. Right-Hand-Side Expressions

Rhs =
  ( ArrayAllocation_
  | ObjectAllocation_
  | Expression(allowLemma: false, allowLambda: true)
  | HavocRhs_
  )
  { Attribute } 

An Rhs is either array allocation, an object allocation, an expression, or a havoc right-hand-side, optionally followed by one or more Attributes.

Right-hand-side expressions appear in the following constructs: ReturnStmt, YieldStmt, UpdateStmt, or VarDeclStatement. These are the only contexts in which arrays or objects may be allocated, or in which havoc may be produced.

22.12. Array Allocation

ArrayAllocation_ = "new" Type "[" Expressions "]" 

This allocates a new single or multi-dimensional array as explained in section 14.

22.13. Object Allocation

ObjectAllocation_ = "new" Type [ "(" [ Expressions ] ")" ] 

This allocated a new object of a class type as explained in section 12.

22.14. Havoc Right-Hand-Side

HavocRhs_ = "*"

A havoc right-hand-side produces an arbitrary value of its associated type. To get a more constrained arbitrary value the “assign-such-that” operator (:|) can be used. See section 21.5.

22.15. Constant Or Atomic Expressions

ConstAtomExpression =
  ( LiteralExpression_
  | FreshExpression_
  | OldExpression_
  | CardinalityExpression_
  | NumericConversionExpression_
  | ParensExpression
  ) 

A ConstAtomExpression represent either a constant of some type, or an atomic expression. A ConstAtomExpression is never an l-value. Also, a ConstAtomExpression is never followed by an open parenthesis (but could very well have a suffix that starts with a period or a square bracket). (The “Also…” part may change if expressions in Dafny could yield functions.)

22.16. Literal Expressions

LiteralExpression_ = 
 ( "false" | "true" | "null" | Nat | Dec | 
   charToken | stringToken | "this") 

A literal expression is a boolean literal, a null object reference, an unsigned integer or real literal, a character or string literal, or “this” which denote the current object in the context of an instance method or function.

22.17. Fresh Expressions

FreshExpression_ = "fresh" "(" Expression(allowLemma: true, allowLambda: true) ")" 

fresh(e) returns a boolean value that is true if the objects referenced in expression e were all freshly allocated in the current method invocation. The argument of fresh must be either an object reference or a collection of object references.

22.18. Old Expressions

OldExpression_ = "old" "(" Expression(allowLemma: true, allowLambda: true) ")" 

An old expression is used in postconditions. old(e) evaluates to the value expression e had on entry to the current method.

22.19. Cardinality Expressions

CardinalityExpression_ = "|" Expression(allowLemma: true, allowLambda: true) "|" 

For a collection expression c, |c| is the cardinality of c. For a set or sequence the cardinality is the number of elements. For a multiset the cardinality is the sum of the multiplicities of the elements. For a map the cardinality is the cardinality of the domain of the map. Cardinality is not defined for infinite maps. For more see section 9.

22.20. Numeric Conversion Expressions

NumericConversionExpression_ = 
    ( "int" | "real" ) "(" Expression(allowLemma: true, allowLambda: true) ")" 

Numeric conversion expressions give the name of the target type followed by the expression being converted in parentheses. This production is for int and real as the target types but this also applies more generally to other numeric types, e.g. newtypes. See section 19.0.

22.21. Parenthesized Expression

ParensExpression =
  "(" [ Expressions ] ")" 

A ParensExpression is a list of zero or more expressions enclosed in parentheses.

If there is exactly one expression enclosed then the value is just the value of that expression.

If there are zero or more than one the result is a tuple value. See section 18.1.

22.22. Sequence Display Expression

SeqDisplayExpr = "[" [ Expressions ] "]" 

A sequence display expression provide a way to constructing a sequence with given values. For example

[1, 2, 3]

is a sequence with three elements in it. See section 9.2 for more information on sequences.

22.23. Set Display Expression

SetDisplayExpr = [ "iset" ] "{" [ Expressions ] "}" 

A set display expression provide a way to constructing a set with given elements. If the keyword iset is present then a potentially infinite set is constructed.

For example

{1, 2, 3}

is a set with three elements in it. See section 9.0 for more information on sets.

22.24. Multiset Display or Cast Expression

MultiSetExpr = 
    "multiset" 
    ( "{" [ Expressions ] "}" 
    | "(" Expression(allowLemma: true, allowLambda: true) ")" 
    ) 

A multiset display expression provide a way to constructing a multiset with given elements and multiplicity. For example

multiset{1, 1, 2, 3}

is a multiset with three elements in it. The number 1 has a multiplicity of 2, the others a multiplicity of 1.

On the other hand, a multiset cast expression converts a set or a sequence into a multiset as shown here:

var s : set<int> := {1, 2, 3};
var ms : multiset<int> := multiset(s);
ms := ms + multiset{1};
var sq : seq<int> := [1, 1, 2, 3];
var ms2 : multiset<int> := multiset(sq);
assert ms == ms2;

See section 9.1 for more information on multisets.

22.25. Map Display Expression

MapDisplayExpr = ("map" | "imap" ) "[" [ MapLiteralExpressions ] "]" 
MapLiteralExpressions = 
    Expression(allowLemma: true, allowLambda: true) 
    ":=" Expression(allowLemma: true, allowLambda: true) 
    { "," Expression(allowLemma: true, allowLambda: true) 
          ":=" Expression(allowLemma: true, allowLambda: true) 
    }

A map display expression builds a finite or potentially infinite map from explicit MapLiteralExpressions. For example:

var m := map[1 := "a", 2 := "b"];
ghost var im := imap[1 := "a", 2 := "b"];

Note that imaps may only appear in ghost contexts. See section 9.3 for more details on maps and imaps.

22.26. Endless Expression

EndlessExpression(allowLemma, allowLambda) =
  ( IfExpression_(allowLemma, allowLambda)
  | MatchExpression(allowLemma, allowLambda)
  | QuantifierExpression(allowLemma, allowLambda)
  | SetComprehensionExpr(allowLemma, allowLambda)
  | StmtInExpr Expression(allowLemma, allowLambda)
  | LetExpr(allowLemma, allowLambda)
  | MapComprehensionExpr(allowLemma, allowLambda)
  ) 

EndlessExpression gets it name from the fact that all its alternate productions have no terminating symbol to end them, but rather they all end with an Expression at the end. The various EndlessExpression alternatives are described below.

22.27. If Expression

IfExpression_(allowLemma, allowLambda) = 
    "if" Expression(allowLemma: true, allowLambda: true)
    "then" Expression(allowLemma: true, allowLambda: true) 
    "else" Expression(allowLemma, allowLambda) 

The IfExpression is a conditional expression. It first evaluates the expression following the if. If it evaluates to true then it evaluates the expression following the then and that is the result of the expression. If it evaluates to false then the expression following the else is evaluated and that is the result of the expression. It is important that only the selected expression is evaluated as the following example shows.

var k := 10 / x; // error, may divide by 0.
var m := if x != 0 then 10 / x else 1; // ok, guarded

22.28. Case Bindings and Patterns

CaseBinding_ =
  "case"
  ( Ident [ "(" CasePattern { "," CasePattern } ")" ] 
  | "(" CasePattern { "," CasePattern } ")"
  )

CasePattern = 
  ( Ident "(" [ CasePattern { "," CasePattern } ] ")"
  | "(" [ CasePattern { "," Casepattern } ] ")"
  | IdentTypeOptional
  ) 

Case bindings and patterns are used for (possibly nested) pattern matching on inductive or coinductive values. The CaseBinding_ construct is used in CaseStatement and CaseExpressions. Besides its use in CaseBinding_, CasePatterns are used in LetExprs and VarDeclStatements.

When matching an inductive or coinductive value in a MatchStmt or MatchExpression, there must be a CaseBinding_ for each constructor. A tuple is considered to have a single constructor. The Ident of the CaseBinding_ must match the name of a constructor (or in the case of a tuple the Ident is absent and the second alternative is chosen). The CasePatterns inside the parenthesis are then matched against the argument that were given to the constructor when the value was constructed. The number of CasePatterns must match the number of parameters to the constructor (or the arity of the tuple).

The CasePatterns may be nested. The set of non-constructor-name identifiers contained in a CaseBinding_ must be distinct. They are bound to the corresponding values in the value being matched.

22.29. Match Expression

MatchExpression(allowLemma, allowLambda) = 
  "match" Expression(allowLemma, allowLambda)
  ( "{" { CaseExpression(allowLemma: true, allowLambda: true) } "}" 
  | { CaseExpression(allowLemma, allowLambda) } 
  ) 

CaseExpression(allowLemma, allowLambda) =
    CaseBinding_ "=>" Expression(allowLemma, allowLambda) 

A MatchExpression is used to conditionally evaluate and select an expression depending on the value of an algebraic type, i.e. an inductive type, or a co-inductive type.

The Expression following the match keyword is called the selector. There must be a CaseExpression for each constructor of the type of the selector. The Ident following the case keyword in a CaseExpression is the name of a constructor of the selector's type. It may be absent if the expression being matched is a tuple since these have no constructor name.

If the constructor has parameters then in the CaseExpression the constructor name must be followed by a parenthesized list of CasePatterns. If the constructor has no parameters then the CaseExpression must not have a following CasePattern list. All of the identifiers in the CasePatterns must be distinct. If types for the identifiers are not given then types are inferred from the types of the constructor's parameters. If types are given then they must agree with the types of the corresponding parameters.

A MatchExpression is evaluated by first evaluating the selector. Then the CaseClause is selected for the constructor that was used to construct the evaluated selector. If the constructor had parameters then the actual values used to construct the selector value are bound to the identifiers in the identifier list. The expression to the right of the => in the CaseClause is then evaluated in the environment enriched by this binding. The result of that evaluation is the result of the MatchExpression.

Note that the braces enclosing the CaseClauses may be omitted.

22.30. Quantifier Expression

QuantifierExpression(allowLemma, allowLambda) =
    ( "forall" | "exists" ) QuantifierDomain "::"
    Expression(allowLemma, allowLambda) 

QuantifierDomain =
  IdentTypeOptional { "," IdentTypeOptional } { Attribute } 
  [ "|" Expression(allowLemma: true, allowLambda: true) ]

A QuantifierExpression is a boolean expression that specifies that a given expression (the one following the “::”) is true for all (for forall) or some (for exists) combination of values of the quantified variables, namely those in the QuantifierDomain.

Here are some examples:

assert forall x : nat | x <= 5 :: x * x <= 25;
(forall n :: 2 <= n ==> (d :: n < d && d < 2*n))

or using the Unicode symbols:

assert  x : nat | x <= 5  x * x <= 25;
( n  2 <= n ==> ( d  n < d && d < 2*n))

The quantifier identifiers are bound within the scope of the expressions in the QuantifierExpression.

It types are not given for the quantified identifiers then Dafny attempts to infer their types from the context of the expressions. It this is not possible the program is in error.

22.31. Set Comprehension Expressions

SetComprehensionExpr(allowLemma, allowLambda) =
  [ "set" | "iset" ] 
  IdentTypeOptional { "," IdentTypeOptional } { Attribute }
  "|" Expression(allowLemma, allowLambda) 
  [ "::" Expression(allowLemma, allowLambda) ] 

A set comprehension expression is an expressions that yields a set (possibly infinite if iset is used) that satisfies specified conditions. There are two basic forms.

If there is only one quantified variable the optional "::" Expression need not be supplied, in which case it is as if it had been supplied and the expression consists solely of the quantified variable. That is,

set x : T | P(x)

is equivalent to

set x : T | P(x) :: x

For the full form

var S := set x1:T1, x2:T2 ... | P(x1, x2, ...) :: Q(x1, x2, ...)

the elements of S will be all values resulting from evaluation of Q(x1, x2, ...) for all combinations of quantified variables x1, x2, ... such that predicate P(x1, x2, ...) holds. For example,

var S := set x:nat, y:nat | x < 2 && y < 2 :: (x, y)

would yield S == {(0, 0), (0, 1), (1, 0), (1,1) }

The types on the quantified variables are optional and if not given Dafny will attempt to infer them from the contexts in which they are used in the P or Q expressions.

If a finite set was specified (“set” keyword used), Dafny must be able to prove that the result is finite otherwise the set comprehension expression will not be accepted.

Set comprehensions involving reference types such as

set o: object | true

are allowed in ghost contexts. In particular, in ghost contexts, the check that the result is finite should allow any set comprehension where the bound variable is of a reference type. In non-ghost contexts, it is not allowed, because–even though the resulting set would be finite–it is not pleasant or practical to compute at run time.

22.32. Statements in an Expression

StmtInExpr = ( AssertStmt | AssumeStmt | CalcStmt ) 

A StmtInExpr is a kind of statement that is allowed to precede an expression in order to ensure that the expression can be evaluated without error. For example:

assume x != 0; 10/x

Assert, assume and calc statements can be used in this way.

22.33. Let Expression

LetExpr(allowLemma, allowLambda) =
    [ "ghost" ] "var" CasePattern { "," CasePattern } 
    ( ":=" | { Attribute } ":|" )
    Expression(allowLemma: false, allowLambda: true) 
    { "," Expression(allowLemma: false, allowLambda: true) } ";" 
    Expression(allowLemma, allowLambda) 

A let expression allows binding of intermediate values to identifiers for use in an expression. The start of the let expression is signaled by the var keyword. They look much like a local variable declaration except the scope of the variable only extends to the enclosed expression.

For example:

var sum := x + y; sum * sum

In the simple case the CasePattern is just an identifier with optional type (which if missing is inferred from the rhs).

The more complex case allows destructuring of constructor expressions. For example:

datatype Stuff = SCons(x: int, y: int) | Other
function GhostF(z: Stuff): int
  requires z.SCons?
{
  var SCons(u, v) := z; var sum := u + v; sum * sum
}

22.34. Map Comprehension Expression

MapComprehensionExpr(allowLemma, allowLambda) = 
  ( "map" | "imap" ) IdentTypeOptional { Attribute } 
  [ "|" Expression(allowLemma: true, allowLambda: true) ] 
  "::" Expression(allowLemma, allowLambda) 

A MapComprehensionExpr defines a finite or infinite map value by defining a domain (using the IdentTypeOptional and the optional condition following the “|”) and for each value in the domain, giving the mapped value using the expression following the “::”.

For example:

function square(x : int) : int { x * x }
method test() 
{
  var m := map x : int | 0 <= x <= 10 :: x * x;
  ghost var im := imap x : int :: x * x;
  ghost var im2 := imap x : int :: square(x);
}

Dafny maps must be finite, so the domain must be constrained to be finite. But imaps may be infinite as the example shows. The last example shows creation of an infinite map that gives the same results as a function.

22.35. Name Segment

NameSegment = Ident [ GenericInstantiation | HashCall ] 

A NameSegment names a Dafny entity by giving its declared name optionally followed by information to make the name more complete. For the simple case it is just an identifier.

If the identifier is for a generic entity it is followed by a GenericInstantiation which provides actual types for the type parameters.

To reference a prefix predicate (see section 18.2.3) or prefix lemma (see section 18.2.4.2), the identifier must be the name of the copredicate or colemma and it must be followed by a HashCall.

22.36. Hash Call

HashCall = "#" [ GenericInstantiation ]
  "[" Expression(allowLemma: true, allowLambda: true) "]" 
  "(" [ Expressions ] ")" 

A HashCall is used to call the prefix for a copredicate or colemma. In the non-generic case it just insert "#[k]" before the call argument list where k is the number of recursion levels.

In the case where the colemma is generic, the generic type argument is given before. Here is an example:

codatatype Stream<T> = Nil | Cons(head: int, stuff: T, tail: Stream)

function append(M: Stream, N: Stream): Stream
{
  match M
  case Nil => N
  case Cons(t, s, M') => Cons(t, s, append(M', N))
}

function zeros<T>(s : T): Stream<T>
{
  Cons(0, s, zeros(s))
}

function ones<T>(s: T): Stream<T>
{
  Cons(1, s, ones(s))
}

copredicate atmost(a: Stream, b: Stream)
{
  match a
  case Nil => true
  case Cons(h,s,t) => b.Cons? && h <= b.head && atmost(t, b.tail)
}

colemma {:induction false} Theorem0<T>(s: T)
  ensures atmost(zeros(s), ones(s))
{
  // the following shows two equivalent ways to getting essentially the
  // co-inductive hypothesis
  if (*) {
    Theorem0#<T>[_k-1](s);
  } else {
    Theorem0(s);
  }
}

where the HashCall is "Theorem0#<T>[_k-1](s);". See sections 18.2.3 and 18.2.4.2.

22.37. Suffix

Suffix =
  ( AugmentedDotSuffix_
  | DatatypeUpdateSuffix_
  | SubsequenceSuffix_
  | SlicesByLengthSuffix_
  | SequenceUpdateSuffix_
  | SelectionSuffix_
  | ArgumentListSuffix_
  ) 

The Suffix non-terminal describes ways of deriving a new value from the entity to which the suffix is appended. There are six kinds of suffixes which are described below.

22.37.0. Augmented Dot Suffix

AugmentedDotSuffix_ = ". " DotSuffix [ GenericInstantiation | HashCall ] 

An augmented dot suffix consists of a simple DotSuffix optionally followed by either

22.37.1. Datatype Update Suffix

DatatypeUpdateSuffix_ =
  "." "(" MemberBindingUpdate { "," MemberBindingUpdate } ")"

MemberBindingUpdate = 
  ( ident | digits ) ":=" Expression(allowLemma: true, allowLambda: true)

A datatype update suffix is used to produce a new datatype value that is the same as an old datatype value except that the value corresponding to a given destructor has the specified value. In a MemberBindingUpdate, the ident or digits is the name of a destructor (i.e. formal parameter name) for one of the constructors of the datatype. The expression to the right of the “:=” is the new value for that formal.

All of the destructors in a DatatypeUpdateSuffix_ must be for the same constructor, and if they do not cover all of the destructors for that constructor then the datatype value being updated must have a value derived from that same constructor.

Here is an example:

module NewSyntax {
datatype MyDataType = MyConstructor(myint:int, mybool:bool) 
                    | MyOtherConstructor(otherbool:bool) 
                    | MyNumericConstructor(42:int)

method test(datum:MyDataType, x:int) 
    returns (abc:MyDataType, def:MyDataType, ghi:MyDataType, jkl:MyDataType)
    requires datum.MyConstructor?;
    ensures abc == datum.(myint := x + 2);
    ensures def == datum.(otherbool := !datum.mybool);
    ensures ghi == datum.(myint := 2).(mybool := false);
    // Resolution error: no non_destructor in MyDataType
    //ensures jkl == datum.(non_destructor := 5);
    ensures jkl == datum.(42 := 7);
{
    abc := MyConstructor(x + 2, datum.mybool); 
    abc := datum.(myint := x + 2);
    def := MyOtherConstructor(!datum.mybool);
    ghi := MyConstructor(2, false);
    jkl := datum.(42 := 7);

    assert abc.(myint := abc.myint - 2) == datum.(myint := x);
}
}

22.37.2. Subsequence Suffix

SubsequenceSuffix_ = 
  "[" [ Expression(allowLemma: true, allowLambda: true) ]
      ".." [ Expression(allowLemma: true, allowLambda: true) ]
  "]" 

A subsequence suffix applied to a sequence produces a new sequence whose elements are taken from a contiguous part of the original sequence. For example, expression s[lo..hi] for sequence s, and integer-based numerics lo and hi satisfying 0 <= lo <= hi <= |s|. See section 9.2.3 for details.

22.37.3. Slices By Length Suffix

SlicesByLengthSuffix_ = 
  "[" Expression(allowLemma: true, allowLambda: true)
      ":" Expression(allowLemma: true, allowLambda: true)
      { ":" Expression(allowLemma: true, allowLambda: true) }
      [ ":" ]
  "]" 

Applying a SlicesByLengthSuffix_ to a sequence produces a sequence of subsequences of the original sequence. See section 9.2.3 for details.

22.37.4. Sequence Update Suffix

SequenceUpdateSuffix_ =
  "[" Expression(allowLemma: true, allowLambda: true) 
      ":=" Expression(allowLemma: true, allowLambda: true) 
  "]" 

For a sequence s and expressions i and v, the expression s[i := v] is the same as the sequence s except that at index i it has value v.

22.37.5. Selection Suffix

SelectionSuffix_ =
  "[" Expression(allowLemma: true, allowLambda: true) 
      { "," Expression(allowLemma: true, allowLambda: true) } 
  "]" 

If a SelectionSuffix_ has only one expression in it, it is a zero-based index that may be used to select a single element of a sequence or from a single-dimensional array.

If a SelectionSuffix_ has more than one expression in it, then it is a list of indices to index into a multi-dimensional array. The rank of the array must be the same as the number of indices.

22.37.6. Argument List Suffix

ArgumentListSuffix_ = "(" [ Expressions ] ")" 

An argument list suffix is a parenthesized list of expressions that are the arguments to pass to a method or function that is being called. Applying such a suffix caused the method or function to be called and the result is the result of the call.

22.38. Expression Lists

Expressions = 
    Expression(allowLemma: true, allowLambda: true) 
    { "," Expression(allowLemma: true, allowLambda: true) }

The Expressions non-terminal represents a list of one or more expressions separated by a comma.

23. Module Refinement

TODO: Write this section.

24. Attributes

Attribute = "{" ":" AttributeName [ Expressions ] "}" 

Dafny allows many of its entities to be annotated with Attributes. The grammar shows where the attribute annotations may appear.

Here is an example of an attribute from the Dafny test suite:

{:MyAttribute "hello", "hi" + "there", 57}

In general an attribute may have any name the user chooses. It may be followed by a comma separated list of expressions. These expressions will be resolved and type-checked in the context where the attribute appears.

24.0. Dafny Attribute Implementation Details

In the Dafny implementation the Attributes type holds the name of the attribute, a list of Expression arguments and a link to the previous Attributes object for that Dafny entity. So for each Dafny entity that has attributes we have a list of them.

Dafny stores attributes on the following kinds of entities: Declaration (base class), ModuleDefinition, Statement, AssignmentRhs, LocalVariable, LetExpr, ComprehensionExpr, MaybeFreeExpression, Specification.

TODO: Dafny internals information should go into a separate document on Dafny internals.

24.1. Dafny Attributes

All entities that Dafny translates to Boogie have their attributes passed on to Boogie except for the {:axiom} attribute (which conflicts with Boogie usage) and the {:trigger} attribute which is instead converted into a Boogie quantifier trigger. See Section 11 of [16].

Dafny has special processing for some attributes. For some attributes the setting is only looked for on the entity of interest. For others we start at the entity and if the attribute is not there, look up in the hierarchy (enclosing class and enclosing modules). The latter case is checked by the ContainsBoolAtAnyLevel method in the Dafny source. The attribute declaration closest to the entity overrides those further away.

For attributes with a single boolean expression argument, the attribute with no argument is interpreted as if it were true.

The attributes that are processed specially by Dafny are described in the following sections.

24.1.0. assumption

This attribute can only be placed on a local ghost bool variable of a method. Its declaration cannot have a rhs, but it is allowed to participate as the lhs of exactly one assignment of the form: b := b && expr;. Such a variable declaration translates in the Boogie output to a declaration followed by an assume b command. TODO: What is the motivation for this?

24.1.1. autoReq boolExpr

For a function declaration, if this attribute is set true at the nearest level, then its requires clause is strengthed sufficiently so that it may call the functions that it calls.

For following example

function f(x:int) : bool
  requires x > 3
{
  x > 7
}

// Should succeed thanks to auto_reqs
function {:autoReq} g(y:int, b:bool) : bool
{
  if b then f(y + 2) else f(2*y)
}

the {:autoReq} attribute causes Dafny to deduce a requires clause for g as if it had been declared

function g(y:int, b:bool) : bool
  requires if b then y + 2 > 3 else 2 * y > 3
{
  if b then f(y + 2) else f(2*y)
}

24.1.2. autocontracts

Dynamic frames [9, 17, 32, 33] are frame expressions that can vary dynamically during program execution. AutoContracts is an experimental feature that will fill much of the dynamic-frames boilerplate into a class.

From the user's perspective, what needs to be done is simply:

AutoContracts will then:

   requires Valid()
   modifies Repr
   ensures Valid() && fresh(Repr - old(Repr))

24.1.3. axiom

The {:axiom} attribute may be placed on a function or method. It means that the post-condition may be assumed to be true without proof. In that case also the body of the function or method may be omitted.

The {:axiom} attribute is also used for generated reveal_* lemmas as shown in Section 24.1.12.

24.1.4. compile

The {:compile} attribute takes a boolean argument. It may be applied to any top-level declaration. If that argument is false then that declaration will not be compiled into .Net code.

24.1.5. decl

The {:decl} attribute may be placed on a method declaration. It inhibits the error message that has would be given when the method has a ensures clauses but no body.

TODO: There are no examples of this in the Dafny tests. What is the motivation for this?

24.1.6. fuel

The fuel attributes is used to specify how much “fuel” a function should have, i.e., how many times Z3 is permitted to unfold it's definition. The new {:fuel} annotation can be added to the function itself, it which case it will apply to all uses of that function, or it can overridden within the scope of a module, function, method, iterator, calc, forall, while, assert, or assume. The general format is:

{:fuel functionName,lowFuel,highFuel}

When applied as an annotation to the function itself, omit functionName. If highFuel is omitted, it defaults to lowFuel + 1.

The default fuel setting for recursive functions is 1,2. Setting the fuel higher, say, to 3,4, will give more unfoldings, which may make some proofs go through with less programmer assistance (e.g., with fewer assert statements), but it may also increase verification time, so use it with care. Setting the fuel to 0,0 is similar to making the definition opaque, except when used with all literal arguments.

24.1.7. heapQuantifier

The {:heapQuantifier} attribute may be used on a QuantifierExpression. When it appears in a quantifier expression it is as if a new heap-valued quantifier variable was added to the quantification. Consider this code that is one of the invariants of a while loop.

invariant forall u {:heapQuantifier} :: f(u) == u + r

The quantifier is translated into the following Boogie:

(forall q$heap#8: Heap, u#5: int ::
    {:heapQuantifier} 
    $IsGoodHeap(q$heap#8) && ($Heap == q$heap#8 || $HeapSucc($Heap, q$heap#8))
       ==> $Unbox(Apply1(TInt, TInt, f#0, q$heap#8, $Box(u#5))): int == u#5 + r#0);

What this is saying is that the quantified expression, f(u) == u + r, which may depend on the heap, is also valid for any good heap that is either the same as the current heap, or that is derived from it by heap update operations.

TODO: I think this means that the quantified expression is actually independent of the heap. Is that true?

24.1.8. imported

If a MethodDecl or FunctionDecl has an {:imported} attribute, then it is allowed to have a empty body even though it has an ensures clause. Ordinarily a body would be required in order to provide the proof of the ensures clause (but the (:axiom) attribute also provides this facility, so the need for (:imported) is not clear.) A method or function declaration may be given the (:imported) attribute. This suppresses the error message that would be given if a method or function with an ensures clause does not have a body.

TODO: When would this be used? An example would be helpful.

TODO: When is this useful or valid?

24.1.9. induction

The {:induction} attribute controls the application of proof by induction to two contexts. Given a list of variables on which induction might be applied, the {:induction} attribute selects a sub-list of those variables (in the same order) to which to apply induction.

TODO: Would there be any advantage to taking the order from the attribute, rather than preserving the original order? That would seem to give the user more control.

The two contexts are:

The form of the {:induction} attribute is one of the following:

Here is an example of using it on a quantifier expression:

ghost method Fill_J(s: seq<int>)
  requires forall i :: 1 <= i < |s| ==> s[i-1] <= s[i]
  ensures forall i,j {:induction j} :: 0 <= i < j < |s| ==> s[i] <= s[j]
{
}

24.1.10. layerQuantifier

When Dafny is translating a quantified expression, if it has a {:layerQuantifier} attribute an additional quantifier variable is added to the quantifier bound variables. This variable as the predefined LayerType. A {:layerQuantifier} attribute may be placed on a quantifier expression. Translation of Dafny into Boogie defines a LayerType which has defined zero and successor constructors.

The Dafny source has the comment that “if a function is recursive, then make the reveal lemma quantifier a layerQuantifier.” And in that case it adds the attribute to the quantifier.

There is no explicit user of the {:layerQuantifier} attribute in the Dafny tests. So I believe this attribute is only used internally by Dafny and not externally.

TODO: Need more complete explanation of this attribute.

24.1.11. nativeType

The {:nativeType} attribute may only be used on a NewtypeDecl where the base type is an integral type. It can take one of the following forms:

24.1.12. opaque

Ordinarily the body of a function is transparent to its users but sometimes it is useful to hide it. If a function f is given the {:opaque} attribute then Dafny hides the body of the function, so that it can only be seen within its recursive clique (if any), or if the programmer specifically asks to see it via the reveal_f() lemma.

We create a lemma to allow the user to selectively reveal the function's body
That is, given:

  function {:opaque} foo(x:int, y:int) : int
    requires 0 <= x < 5
    requires 0 <= y < 5
    ensures foo(x, y) < 10
  { x + y }

We produce:

  lemma {:axiom} reveal_foo()
    ensures forall x:int, y:int {:trigger foo(x,y)} ::
         0 <= x < 5 && 0 <= y < 5 ==> foo(x,y) == foo_FULL(x,y)

where foo_FULL is a copy of foo which does not have its body hidden. In addition foo_FULL is given the {:opaque_full} and {:auto_generated} attributes in addition to the {:opaque} attribute (which it got because it is a copy of foo).

24.1.13. opaque full

The {:opaque_full} attribute is used to mark the full version of an opaque function. See Section 24.1.12.

24.1.14. prependAssertToken

This is used internally in Dafny as part of module refinement. It is an attribute on an assert statement. The Dafny code has the following comment:

// Clone the expression, but among the new assert's attributes, indicate
// that this assertion is supposed to be translated into a check.  That is,
// it is not allowed to be just assumed in the translation, despite the fact
// that the condition is inherited.

TODO: Decide if we want to describe this in more detail, or whether the functionality is already adequately described where refinement is described.

24.1.15. tailrecursion

This attribute is used on a method declarations. It has a boolean argument.

If specified with a false value it means the user specifically requested no tail recursion, so none is done.

If specified with a true value, or if not specified then tail recursive optimization will be attempted subject to the following conditions:

24.1.16. timeLimitMultiplier

This attribute may be placed on a method or function declaration and has an integer argument. If {:timeLimitMultiplier X} was specified a {:timelimit Y} attributed is passed on to Boogie where Y is X times either the default verification time limit for a function or method, or times the value specified by the Boogie timelimit command-line option.

24.1.17. trigger

Trigger attributes are used on quantifiers and comprehensions. They are translated into Boogie triggers.

24.1.18. typeQuantifier

The {:typeQuantifier} must be used on a quantifier if it quantifies over types.

24.2. Boogie Attributes

Use the Boogie “/attrHelp” option to get the list of attributes that Boogie recognizes and their meaning. Here is the output at the time of this writing. Dafny passes attributes that have been specified to the Boogie.

Boogie: The following attributes are supported by this implementation.

  ---- On top-level declarations ---------------------------------------------

    {:ignore}
      Ignore the declaration (after checking for duplicate names).

    {:extern}
      If two top-level declarations introduce the same name (for example, two
      constants with the same name or two procedures with the same name), then
      Boogie usually produces an error message.  However, if at least one of
      the declarations is declared with :extern, one of the declarations is
      ignored.  If both declarations are :extern, Boogie arbitrarily chooses
      one of them to keep; otherwise, Boogie ignore the :extern declaration
      and keeps the other.

    {:checksum <string>}
      Attach a checksum to be used for verification result caching.

  ---- On implementations and procedures -------------------------------------

     {:inline N}
       Inline given procedure (can be also used on implementation).
       N should be a non-negative number and represents the inlining depth.
       With /inline:assume call is replaced with "assume false" once inlining depth is reached.
       With /inline:assert call is replaced with "assert false" once inlining depth is reached.
       With /inline:spec call is left as is once inlining depth is reached.
       With the above three options, methods with the attribute {:inline N} are not verified.
       With /inline:none the entire attribute is ignored.

     {:verify false}
       Skip verification of an implementation.

     {:vcs_max_cost N}
     {:vcs_max_splits N}
     {:vcs_max_keep_going_splits N}
       Per-implementation versions of
       /vcsMaxCost, /vcsMaxSplits and /vcsMaxKeepGoingSplits.

     {:selective_checking true}
       Turn all asserts into assumes except for the ones reachable from
       assumptions marked with the attribute {:start_checking_here}.
       Thus, "assume {:start_checking_here} something;" becomes an inverse
       of "assume false;": the first one disables all verification before
       it, and the second one disables all verification after.

     {:priority N}
       Assign a positive priority 'N' to an implementation to control the order
       in which implementations are verified (default: N = 1).

     {:id <string>}
       Assign a unique ID to an implementation to be used for verification
       result caching (default: "<impl. name>:0").

     {:timeLimit N}
       Set the time limit for a given implementation.

  ---- On functions ----------------------------------------------------------

     {:builtin "spec"}
     {:bvbuiltin "spec"}
       Rewrite the function to built-in prover function symbol 'fn'.

     {:inline}
     {:inline true}
       Expand function according to its definition before going to the prover.

     {:never_pattern true}
       Terms starting with this function symbol will never be
       automatically selected as patterns. It does not prevent them
       from being used inside the triggers, and does not affect explicit
       trigger annotations. Internally it works by adding {:nopats ...}
       annotations to quantifiers.

     {:identity}
     {:identity true}
       If the function has 1 argument and the use of it has type X->X for
       some X, then the abstract interpreter will treat the function as an
       identity function.  Note, the abstract interpreter trusts the
       attribute--it does not try to verify that the function really is an
       identity function.

  ---- On variables ----------------------------------------------------------

     {:existential true}
       Marks a global Boolean variable as existentially quantified. If
       used in combination with option /contractInfer Boogie will check
       whether there a Boolean assignment to the existentials
       that makes all verification conditions valid.  Without option
       /contractInfer the attribute is ignored.

  ---- On assert statements --------------------------------------------------

     {:subsumption n}
       Overrides the /subsumption command-line setting for this assertion.

     {:split_here}
       Verifies code leading to this point and code leading from this point
       to the next split_here as separate pieces.  May help with timeouts.
       May also occasionally double-report errors.

  ---- The end ---------------------------------------------------------------

However a scan of Boogie's sources shows it checks for the following attributes.

25. Dafny User's Guide

25.0. Installing Dafny From Binaries

25.1. Building Dafny from Source

The current version of Dafny only works with Visual Studio 2012, so if you intend to run Dafny from withing Visual Studio you must install Visual Studio 2012.

Dafny performs its verification by translating the Dafny source into the Boogie intermediate verification language. So Dafny references data structures defined in the Boogie project. So the first step is to clone and build Boogie from sources. See https://github.com/boogie-org/boogie.

Follow these steps.

Let work be a working directory.

Clone Boogie using

cd work
git clone https://github.com/boogie-org/boogie.git

Build Boogie using the directions from the Boogie web site, which for Windows currently are:

  1. Open Source\Boogie.sln in Visual Studio
  2. Right click the Boogie solution in the Solution Explorer and click Enable NuGet Package Restore. You will probably get a prompt asking to confirm this. Choose Yes.
  3. Click BUILD > Build Solution.

Clone Dafny using Mercurial. The Dafny directory must be a sibling of the Boogie directory in order for it to find the Boogie files it needs.

cd work
hg clone https://hg.codeplex.com/dafny 

Download and install the Visual Studio 2012 SDK from

This is needed to build the Visual Studio Extension that runs Dafny from within Visual Studio 2012.

Build the command-line Dafny executables. 1. Open dafny\Source\Dafny.sln in Visual Studio 2. Click BUILD > Build Solution.

Build and install the Dafny Visual Studio extensions

  1. Open dafny/Source/DafnyExtension.sln in Visual Studio
  2. Click BUILD > Build Solution.
  3. This builds DafnyLanguageService.vsix and DafnyMenu.vsix in the dafny/Binaries directory.
  4. Install these by clicking on them from Windows Explorer. When prompted, only check installing into Visual Studio 2012.

25.2. Using Dafny From Visual Studio

To test your installation, you can open Dafny test files from the dafny/Test subdirectory in Visual Studio 2012. You will want to use “VIEW/Error List” to ensure that you see any errors that Dafny detects, and “VIEW/Output” to see the result of any compilation.

An example of a valid Dafny test is

dafny\Test\vstte2012\Tree.dfy

You can choose “Dafny/Compile” to compile the Dafny program to C#. Doing that for the above test produces Tree.cs and Tree.dll (since this test does not have a main program).

The following file:

D:\gh\dafny\Test\dafny0\Array.dfy

is an example of a Dafny file with verification errors. The source will show red squiggles or dots where there are errors, and the Error List window will describe the errors.

25.3. Using Dafny From the Command Line

25.3.0. Dafny Command Line Options

The command Dafny.exe /? gives the following description of options that can be passed to Dafny.

  ---- Dafny options ---------------------------------------------------------

  Multiple .dfy files supplied on the command line are concatenated into one
  Dafny program.

  /dprelude:<file>
                choose Dafny prelude file
  /dprint:<file>
                print Dafny program after parsing it
                (use - as <file> to print to console)
  /printMode:<Everything|NoIncludes|NoGhost>
                NoIncludes disables printing of {:verify false} methods incorporated via the
                include mechanism, as well as datatypes and fields included from other files.
                NoGhost disables printing of functions, ghost methods, and proof statements 
                in implementation methods.  It also disables anything NoIncludes disables.
  /rprint:<file>
                print Dafny program after resolving it
                (use - as <file> to print to console)
  /dafnyVerify:<n>
                0 - stop after typechecking
                1 - continue on to translation, verification, and compilation
  /compile:<n>  0 - do not compile Dafny program
                1 (default) - upon successful verification of the Dafny
                    program, compile Dafny program to .NET assembly
                    Program.exe (if the program has a Main method) or
                    Program.dll (othewise), where Program.dfy is the name
                    of the last .dfy file on the command line
                2 - always attempt to compile Dafny program to C# program
                    out.cs, regardless of verification outcome
                3 - if there is a Main method and there are no verification
                    errors, compiles program in memory (i.e., does not write
                    an output file) and runs it
  /spillTargetCode:<n>
                0 (default) - don't write the compiled Dafny program (but
                    still compile it, if /compile indicates to do so)
                1 - write the compiled Dafny program as a .cs file
  /dafnycc      Disable features not supported by DafnyCC
  /noCheating:<n>
                0 (default) - allow assume statements and free invariants
                1 - treat all assumptions as asserts, and drop free.
  /induction:<n>
                0 - never do induction, not even when attributes request it
                1 - only apply induction when attributes request it
                2 - apply induction as requested (by attributes) and also
                    for heuristically chosen quantifiers
                3 (default) - apply induction as requested, and for
                    heuristically chosen quantifiers and ghost methods
  /inductionHeuristic:<n>
                0 - least discriminating induction heuristic (that is, lean
                    toward applying induction more often)
                1,2,3,4,5 - levels in between, ordered as follows as far as
                    how discriminating they are:  0 < 1 < 2 < (3,4) < 5 < 6
                6 (default) - most discriminating
  /noIncludes   Ignore include directives
  /noNLarith    Reduce Z3's knowledge of non-linear arithmetic (*,/,%).
                Results in more manual work, but also produces more predictable behavior.
  /autoReqPrint:<file>
                Print out requirements that were automatically generated by autoReq.
  /noAutoReq    Ignore autoReq attributes
  /allowGlobals Allow the implicit class '_default' to contain fields, instance functions,
                and instance methods.  These class members are declared at the module scope,
                outside of explicit classes.  This command-line option is provided to simply
                a transition from the behavior in the language prior to version 1.9.3, from
                which point onward all functions and methods declared at the module scope are
                implicitly static and fields declarations are not allowed at the module scope.
                The reference manual is written assuming this option is not given.


  /nologo       suppress printing of version number, copyright message
  /env:<n>      print command line arguments
                  0 - never, 1 (default) - during BPL print and prover log,
                  2 - like 1 and also to standard output
  /wait         await Enter from keyboard before terminating program
  /xml:<file>   also produce output in XML format to <file>

  ---- Boogie options --------------------------------------------------------

  Multiple .bpl files supplied on the command line are concatenated into one
  Boogie program.

  /proc:<p>      : limits which procedures to check
  /noResolve     : parse only
  /noTypecheck   : parse and resolve only

  /print:<file>  : print Boogie program after parsing it
                   (use - as <file> to print to console)
  /pretty:<n>
                0 - print each Boogie statement on one line (faster).
                1 (default) - pretty-print with some line breaks.
  /printWithUniqueIds : print augmented information that uniquely
                   identifies variables
  /printUnstructured : with /print option, desugars all structured statements
  /printDesugared : with /print option, desugars calls

  /overlookTypeErrors : skip any implementation with resolution or type
                        checking errors

  /loopUnroll:<n>
                unroll loops, following up to n back edges (and then some)
  /soundLoopUnrolling
                sound loop unrolling
  /printModel:<n>
                0 (default) - do not print Z3's error model
                1 - print Z3's error model
                2 - print Z3's error model plus reverse mappings
                4 - print Z3's error model in a more human readable way
  /printModelToFile:<file>
                print model to <file> instead of console
  /mv:<file>    Specify file where to save the model in BVD format
  /enhancedErrorMessages:<n>
                0 (default) - no enhanced error messages
                1 - Z3 error model enhanced error messages

  /printCFG:<prefix> : print control flow graph of each implementation in
                       Graphviz format to files named:
                         <prefix>.<procedure name>.dot

  /useBaseNameForFileName : When parsing use basename of file for tokens instead
                            of the path supplied on the command line

  ---- Inference options -----------------------------------------------------

  /infer:<flags>
                use abstract interpretation to infer invariants
                The default is /infer:i
                   <flags> are as follows (missing <flags> means all)
                   i = intervals
                   c = constant propagation
                   d = dynamic type
                   n = nullness
                   p = polyhedra for linear inequalities
                   t = trivial bottom/top lattice (cannot be combined with
                       other domains)
                   j = stronger intervals (cannot be combined with other
                       domains)
                or the following (which denote options, not domains):
                   s = debug statistics
                0..9 = number of iterations before applying a widen (default=0)
  /noinfer      turn off the default inference, and overrides the /infer
                switch on its left
  /checkInfer   instrument inferred invariants as asserts to be checked by
                theorem prover
  /interprocInfer
                perform interprocedural inference (deprecated, not supported)
  /contractInfer
                perform procedure contract inference
  /instrumentInfer
                h - instrument inferred invariants only at beginning of
                    loop headers (default)
                e - instrument inferred invariants at beginning and end
                    of every block (this mode is intended for use in
                    debugging of abstract domains)
  /printInstrumented
                print Boogie program after it has been instrumented with
                invariants

  ---- Debugging and general tracing options ---------------------------------

  /trace        blurt out various debug trace information
  /traceTimes   output timing information at certain points in the pipeline
  /tracePOs     output information about the number of proof obligations
                (also included in the /trace output)
  /log[:method] Print debug output during translation

  /break        launch and break into debugger

  ---- Verification-condition generation options -----------------------------

  /liveVariableAnalysis:<c>
                0 = do not perform live variable analysis
                1 = perform live variable analysis (default)
                2 = perform interprocedural live variable analysis
  /noVerify     skip VC generation and invocation of the theorem prover
  /verifySnapshots:<n>
                verify several program snapshots (named <filename>.v0.bpl
                to <filename>.vN.bpl) using verification result caching:
                0 - do not use any verification result caching (default)
                1 - use the basic verification result caching
                2 - use the more advanced verification result caching
  /verifySeparately
                verify each input program separately
  /removeEmptyBlocks:<c>
                0 - do not remove empty blocks during VC generation
                1 - remove empty blocks (default)
  /coalesceBlocks:<c>
                0 = do not coalesce blocks
                1 = coalesce blocks (default)
  /vc:<variety> n = nested block (default for /prover:Simplify),
                m = nested block reach,
                b = flat block, r = flat block reach,
                s = structured, l = local,
                d = dag (default, except with /prover:Simplify)
                doomed = doomed
  /traceverify  print debug output during verification condition generation
  /subsumption:<c>
                apply subsumption to asserted conditions:
                0 - never, 1 - not for quantifiers, 2 (default) - always
  /alwaysAssumeFreeLoopInvariants
                usually, a free loop invariant (or assume
                statement in that position) is ignored in checking contexts
                (like other free things); this option includes these free
                loop invariants as assumes in both contexts
  /inline:<i>   use inlining strategy <i> for procedures with the :inline
                attribute, see /attrHelp for details:
                  none
                  assume (default)
                  assert
                  spec
  /printInlined
                print the implementation after inlining calls to
                procedures with the :inline attribute (works with /inline)
  /lazyInline:1
                Use the lazy inlining algorithm
  /stratifiedInline:1
                Use the stratified inlining algorithm
  /fixedPointEngine:<engine>
                Use the specified fixed point engine for inference
  /recursionBound:<n>
                Set the recursion bound for stratified inlining to
                be n (default 500)
  /inferLeastForUnsat:<str>
                Infer the least number of constants (whose names
                are prefixed by <str>) that need to be set to
                true for the program to be correct. This turns
                on stratified inlining.
  /smoke        Soundness Smoke Test: try to stick assert false; in some
                places in the BPL and see if we can still prove it
  /smokeTimeout:<n>
                Timeout, in seconds, for a single theorem prover
                invocation during smoke test, defaults to 10.
  /causalImplies
                Translate Boogie's A ==> B into prover's A ==> A && B.
  /typeEncoding:<m>
                how to encode types when sending VC to theorem prover
                   n = none (unsound)
                   p = predicates (default)
                   a = arguments
                   m = monomorphic
  /monomorphize   
                Do not abstract map types in the encoding (this is an
                experimental feature that will not do the right thing if
                the program uses polymorphism)
  /reflectAdd   In the VC, generate an auxiliary symbol, elsewhere defined
                to be +, instead of +.

  ---- Verification-condition splitting --------------------------------------

  /vcsMaxCost:<f>
                VC will not be split unless the cost of a VC exceeds this
                number, defaults to 2000.0. This does NOT apply in the
                keep-going mode after first round of splitting.
  /vcsMaxSplits:<n>
                Maximal number of VC generated per method. In keep
                going mode only applies to the first round.
                Defaults to 1.
  /vcsMaxKeepGoingSplits:<n>
                If set to more than 1, activates the keep
                going mode, where after the first round of splitting,
                VCs that timed out are split into <n> pieces and retried
                until we succeed proving them, or there is only one
                assertion on a single path and it timeouts (in which
                case error is reported for that assertion).
                Defaults to 1.
  /vcsKeepGoingTimeout:<n>
                Timeout in seconds for a single theorem prover
                invocation in keep going mode, except for the final
                single-assertion case. Defaults to 1s.
  /vcsFinalAssertTimeout:<n>
                Timeout in seconds for the single last
                assertion in the keep going mode. Defaults to 30s.
  /vcsPathJoinMult:<f>
                If more than one path join at a block, by how much
                multiply the number of paths in that block, to accomodate
                for the fact that the prover will learn something on one
                paths, before proceeding to another. Defaults to 0.8.
  /vcsPathCostMult:<f1>
  /vcsAssumeMult:<f2>
                The cost of a block is
                    (<assert-cost> + <f2>*<assume-cost>) * 
                    (1.0 + <f1>*<entering-paths>)
                <f1> defaults to 1.0, <f2> defaults to 0.01.
                The cost of a single assertion or assumption is
                currently always 1.0.
  /vcsPathSplitMult:<f>
                If the best path split of a VC of cost A is into
                VCs of cost B and C, then the split is applied if
                A >= <f>*(B+C), otherwise assertion splitting will be
                applied. Defaults to 0.5 (always do path splitting if
                possible), set to more to do less path splitting
                and more assertion splitting.
  /vcsDumpSplits
                For split #n dump split.n.dot and split.n.bpl.
                Warning: Affects error reporting.
  /vcsCores:<n>
                Try to verify <n> VCs at once. Defaults to 1.
  /vcsLoad:<f>  Sets vcsCores to the machine's ProcessorCount * f,
                rounded to the nearest integer (where 0.0 <= f <= 3.0),
                but never to less than 1.

  ---- Prover options --------------------------------------------------------

  /errorLimit:<num>
                Limit the number of errors produced for each procedure
                (default is 5, some provers may support only 1)
  /timeLimit:<num>
                Limit the number of seconds spent trying to verify
                each procedure
  /errorTrace:<n>
                0 - no Trace labels in the error output,
                1 (default) - include useful Trace labels in error output,
                2 - include all Trace labels in the error output
  /vcBrackets:<b>
                bracket odd-charactered identifier names with |'s.  <b> is:
                   0 - no (default with non-/prover:Simplify),
                   1 - yes (default with /prover:Simplify)
  /prover:<tp>  use theorem prover <tp>, where <tp> is either the name of
                a DLL containing the prover interface located in the
                Boogie directory, or a full path to a DLL containing such
                an interface. The standard interfaces shipped include:
                    SMTLib (default, uses the SMTLib2 format and calls Z3)
                    Z3 (uses Z3 with the Simplify format)
                    Simplify
                    ContractInference (uses Z3)
                    Z3api (Z3 using Managed .NET API)
  /proverOpt:KEY[=VALUE]
                Provide a prover-specific option (short form /p).
  /proverLog:<file>
                Log input for the theorem prover.  Like filenames
                supplied as arguments to other options, <file> can use the
                following macros:
                    @TIME@    expands to the current time
                    @PREFIX@  expands to the concatenation of strings given
                              by /logPrefix options
                    @FILE@    expands to the last filename specified on the
                              command line
                In addition, /proverLog can also use the macro '@PROC@',
                which causes there to be one prover log file per
                verification condition, and the macro then expands to the
                name of the procedure that the verification condition is for.
  /logPrefix:<str>
                Defines the expansion of the macro '@PREFIX@', which can
                be used in various filenames specified by other options.
  /proverLogAppend
                Append (not overwrite) the specified prover log file
  /proverWarnings
                0 (default) - don't print, 1 - print to stdout,
                2 - print to stderr
  /proverMemoryLimit:<num>
                Limit on the virtual memory for prover before
                restart in MB (default:100MB)
  /restartProver
                Restart the prover after each query
  /proverShutdownLimit<num>
                Time between closing the stream to the prover and
                killing the prover process (default: 0s)
  /platform:<ptype>,<location>
                ptype = v11,v2,cli1
                location = platform libraries directory

  Simplify specific options:
  /simplifyMatchDepth:<num>
                Set Simplify prover's matching depth limit

  Z3 specific options:
  /z3opt:<arg>  specify additional Z3 options
  /z3multipleErrors
                report multiple counterexamples for each error
  /useArrayTheory
                use Z3's native theory (as opposed to axioms).  Currently
                implies /monomorphize.
  /useSmtOutputFormat
                Z3 outputs a model in the SMTLIB2 format.
  /z3types      generate multi-sorted VC that make use of Z3 types
  /z3lets:<n>   0 - no LETs, 1 - only LET TERM, 2 - only LET FORMULA,
                3 - (default) any
  /z3exe:<path>
                path to Z3 executable

  CVC4 specific options:
  /cvc4exe:<path>
                path to CVC4 executable

26. References

References

[0]  Mike Barnett, Bor-Yuh Evan Chang, Robert DeLine, Bart Jacobs, and K. Rustan M. Leino. Boogie: A modular reusable verifier for object-oriented programs. In Frank S. de Boer, Marcello M. Bonsangue, Susanne Graf, and Willem-Paul de Roever, editors, Formal Methods for Components and Objects: 4th International Symposium, FMCO 2005, volume 4111, pages 364–387. Springer, September 2006. 🔎
[1]  Yves Bertot and Pierre Castéran. Interactive Theorem Proving and Program Development — Coq'Art: The Calculus of Inductive Constructions. Texts in Theoretical Computer Science. Springer, 2004. 🔎
[2]  Ana Bove, Peter Dybjer, and Ulf Norell. A brief overview of Agda — a functional language with dependent types. In Stefan Berghofer, Tobias Nipkow, Christian Urban, and Makarius Wenzel, editors, Theorem Proving in Higher Order Logics, 22nd International Conference, TPHOLs 2009, volume 5674 of Lecture Notes in Computer Science, pages 73–78. Springer, August 2009. 🔎
[3]  Juanito Camilleri and Tom Melham. Reasoning with inductively defined relations in the HOL theorem prover. Technical Report 265, University of Cambridge Computer Laboratory, 1992. 🔎
[4]  Leonardo de Moura and Nikolaj Bjørner. Z3: An efficient SMT solver. In C. R. Ramakrishnan and Jakob Rehof, editors, Tools and Algorithms for the Construction and Analysis of Systems, 14th International Conference, TACAS 2008, volume 4963, pages 337–340. Springer, March–April 2008. 🔎
[5]  K. Rustan M. Leino et al. Dafny source code. Available at http://dafny.codeplex.com🔎
[6]  John Harrison. Inductive definitions: Automation and application. In E. Thomas Schubert, Phillip J. Windley, and Jim Alves-Foss, editors, TPHOLs 1995, volume 971 of LNCS, pages 200–213. Springer, 1995. 🔎
[7]  C. A. R. Hoare. An axiomatic basis for computer programming. Communications of the ACM, 12 (10): 576–580,583, October 1969. 🔎
[8]  Bart Jacobs and Jan Rutten. An introduction to (co)algebra and (co)induction. In Davide Sangiorgi and Jan Rutten, editors, Advanced Topics in Bisimulation and Coinduction, number 52 in Cambridge Tracts in Theoretical Computer Science, pages 38–99. Cambridge University Press, October 2011. 🔎
[9]  Ioannis T. Kassios. Dynamic frames: Support for framing, dependencies and sharing without restrictions. In Jayadev Misra, Tobias Nipkow, and Emil Sekerinski, editors, FM 2006: Formal Methods, 14th International Symposium on Formal Methods, volume 4085, pages 268–283. Springer, August 2006. 🔎
[10]  Matt Kaufmann, Panagiotis Manolios, and J Strother Moore. Computer-Aided Reasoning: An Approach. Kluwer Academic Publishers, 2000. 🔎
[11]  Dexter Kozen and Alexandra Silva. Practical coinduction. Technical Report http://hdl.handle.net/1813/30510, Comp. and Inf. Science, Cornell Univ., 2012. 🔎
[12]  Alexander Krauss. Automating Recursive Definitions and Termination Proofs in Higher-Order Logic. PhD thesis, Technische Universität München, 2009. 🔎
[13]  K. Rustan M. Leino. Main microsoft research dafny web page, a. Available at http://research.microsoft.com/en-us/projects/dafny🔎
[14]  K. Rustan M. Leino. Dafny quick reference, b. Available at http://research.microsoft.com/en-us/projects/dafny/reference.aspx🔎
[15]  K. Rustan M. Leino. Try dafny in your browser, c. Available at http://rise4fun.com/Dafny🔎
[16]  K. Rustan M. Leino. This is Boogie 2. Manuscript KRML 178, 2008. Available at http://research.microsoft.com/~leino/papers.html🔎
[17]  K. Rustan M. Leino. Dynamic-frame specifications in dafny. JML seminar, Dagstuhl, Germany, 2009. Available at http://research.microsoft.com/en-us/um/people/leino/papers/dafny-jml-dagstuhl-2009.pptx🔎
[18]  K. Rustan M. Leino. Dafny: An automatic program verifier for functional correctness. In Edmund M. Clarke and Andrei Voronkov, editors, LPAR-16, volume 6355, pages 348–370. Springer, April 2010. 🔎
[19]  K. Rustan M. Leino. Automating induction with an SMT solver. In Viktor Kuncak and Andrey Rybalchenko, editors, Verification, Model Checking, and Abstract Interpretation — 13th International Conference, VMCAI 2012, volume 7148, pages 315–331. Springer, January 2012. 🔎
[20]  K. Rustan M. Leino and Michal Moskal. Co-induction simply: Automatic co-inductive proofs in a program verifier. Manuscript KRML 230, 2014a. Available at http://research.microsoft.com/en-us/um/people/leino/papers/krml230.pdf🔎
[21]  K. Rustan M. Leino and Michał Moskal. Co-induction simply — automatic co-inductive proofs in a program verifier. In FM 2014, volume 8442 of LNCS, pages 382–398. Springer, May 2014b. 🔎
[22]  K. Rustan M. Leino and Nadia Polikarpova. Verified calculations. Manuscript KRML 231, 2013. Available at http://research.microsoft.com/en-us/um/people/leino/papers/krml231.pdf🔎
[23]  K. Rustan M. Leino and Philipp Rümmer. A polymorphic intermediate verification language: Design and logical encoding. In Javier Esparza and Rupak Majumdar, editors, Tools and Algorithms for the Construction and Analysis of Systems, 16th International Conference, TACAS 2010, volume 6015, pages 312–327. Springer, March 2010. 🔎
[24]  Xavier Leroy and Hervé Grall. Coinductive big-step operational semantics. Information and Computation, 207 (2): 284–304, February 2009. 🔎
[25]  Panagiotis Manolios and J Strother Moore. Partial functions in ACL2. Journal of Automated Reasoning, 31 (2): 107–127, 2003. 🔎
[26]  Robin Milner. A Calculus of Communicating Systems. Springer-Verlag New York, Inc., 1982. ISBN 0387102353. 🔎
[27]  Hanspeter Mössenböck, Markus Löberbauer, and Albrecht Wöß. The compiler generator coco/r. Open source from University of Linz, 2013. Available at http://www.ssw.uni-linz.ac.at/Research/Projects/Coco/🔎
[28]  Tobias Nipkow and Gerwin Klein. Concrete Semantics with Isabelle/HOL. Springer, 2014. 🔎
[29]  Christine Paulin-Mohring. Inductive definitions in the system Coq — rules and properties. In TLCA '93, volume 664 of LNCS, pages 328–345. Springer, 1993. 🔎
[30]  Lawrence C. Paulson. A fixedpoint approach to implementing (co)inductive definitions. In Alan Bundy, editor, CADE-12, volume 814 of LNCS, pages 148–161. Springer, 1994. 🔎
[31]  Benjamin C. Pierce, Chris Casinghino, Marco Gaboardi, Michael Greenberg, Catalin Hriţcu, Vilhelm Sjöberg, and Brent Yorgey. Software Foundations. http://www.cis.upenn.edu/~bcpierce/sf, version 3.2 edition, January 2015. 🔎
[32]  Jan Smans, Bart Jacobs, Frank Piessens, and Wolfram Schulte. Automatic verifier for Java-like programs based on dynamic frames. In José Luiz Fiadeiro and Paola Inverardi, editors, Fundamental Approaches to Software Engineering, 11th International Conference, FASE 2008, volume 4961, pages 261–275. Springer, March–April 2008. 🔎
[33]  Jan Smans, Bart Jacobs, and Frank Piessens. Implicit dynamic frames: Combining dynamic frames and separation logic. In Sophia Drossopoulou, editor, ECOOP 2009 — Object-Oriented Programming, 23rd European Conference, volume 5653, pages 148–172. Springer, July 2009. 🔎
[34]  Nikhil Swamy, Juan Chen, Cédric Fournet, Pierre-Yves Strub, Karthikeyan Bhargavan, and Jean Yang. Secure distributed programming with value-dependent types. In ICFP 2011, pages 266–278. ACM, September 2011. 🔎
[35]  Alfred Tarski. A lattice-theoretical fixpoint theorem and its applications. Pacific Journal of Mathematics, 5: 285–309, 1955. 🔎
[36]  Glynn Winskel. The Formal Semantics of Programming Languages: An Introduction. MIT Press, 1993. 🔎

0.This will change in a future version of Dafny that will support both nullable and (by default) non-null reference types.

1.Being equality-supporting is just one of many modes that one can imagine types in a rich type system to have. For example, other modes could include having a total order, being zero-initializable, and possibly being uninhabited. If Dafny were to support more modes in the future, the “( )”-suffix syntax may be extended. For now, the suffix can only indicate the equality-supporting mode.

2.Now that Dafny supports built-in tuples, the plan is to change the sequence slice operation to return not a sequence of subsequences, but a tuple of subsequences.

3.This is likely to change in the future to disallow multiple occurrences of the same key.

4.This is likely to change in the future as follows: The in and !in operations will no longer be supported on maps. Instead, for any map m, m.Domain will return its domain as a set and m.Range will return, also as a set, the image of m under its domain.

5.Dafny is open source at dafny.codeplex.com and can also be used online at rise4fun.com/dafny.

6.The current compiler restriction that object cannot be used as a type parameter needs to be removed.

7.It would make sense to rename the special fields _reads and _modifies to have the same names as the corresponding keywords, reads and modifies, as is done for function values. Also, the various _decreasesi fields can combined into one field named decreases whose type is a n-tuple. Thse changes may be incorporated into a future version of Dafny.

8.Higher-order function support in Dafny is rather modest and typical reasoning patterns do not involve them, so this restriction is not as limiting as it would have been in, e.g., Coq.

9.Note, two places where co-predicates and co-lemmas are not analogous are: co-predicates must not make recursive calls to their prefix predicates, and co-predicates cannot mention _k.

10.Should newtype perhaps be renamed to numtype?

11.Would it be useful to also automatically define predicate N?(m: M) { Q }?

12.The restriction is due to a current limitation in the compiler. This will change in the future and will also open up the possibility for subset types and non-null reference types.

13.A future version of Dafny will support user-defined subset types.