path: root/doc/refman/RefMan-com.tex

\chapter[The \Coq~commands]{The \Coq~commands\label{Addoc-coqc}
\ttindex{coqtop}
\ttindex{coqc}
\ttindex{coqchk}}
%HEVEA\cutname{commands.html}

There are three \Coq~commands: 
\begin{itemize}
\item {\tt coqtop}: the \Coq\ toplevel (interactive mode);
\item {\tt coqc}: the \Coq\ compiler (batch compilation);
\item {\tt coqchk}: the \Coq\ checker (validation of compiled libraries).
\end{itemize}
The options are (basically) the same for the first two commands, and
roughly described below. You can also look at the \verb!man! pages of
\verb!coqtop! and \verb!coqc! for more details.


\section{Interactive use ({\tt coqtop})}

In the interactive mode, also known as the \Coq~toplevel, the user can
develop his theories and proofs step by step.  The \Coq~toplevel is
run by the command {\tt coqtop}. 

\index{byte-code}
\index{native code}
\label{binary-images}
They are two different binary images of \Coq: the byte-code one and
the native-code one (if {\ocaml} provides a native-code compiler
for your platform, which is supposed in the following). By default,
\verb!coqtop! executes the native-code version; run \verb!coqtop.byte! to
get the byte-code version.

The byte-code toplevel is based on an {\ocaml}
toplevel (to allow the dynamic link of tactics).  You can switch to
the {\ocaml} toplevel with the command \verb!Drop.!, and come back to the
\Coq~toplevel with the command \verb!Coqloop.loop();;!.

\section{Batch compilation ({\tt coqc})}
The {\tt coqc} command takes a name {\em file} as argument.  Then it
looks for a vernacular file named {\em file}{\tt .v}, and tries to
compile it into a {\em file}{\tt .vo} file (See ~\ref{compiled}).

\Warning The name {\em file} should be a regular {\Coq} identifier, as
defined in Section~\ref{lexical}. It should contain only letters, digits
or underscores (\_). For instance, \verb+/bar/foo/toto.v+ is valid, but
\verb+/bar/foo/to-to.v+ is invalid.

\section[Customization]{Customization at launch time}

\subsection{By resource file\index{Resource file}}

When \Coq\ is launched, with either {\tt coqtop} or {\tt coqc}, the
resource file \verb:$XDG_CONFIG_HOME/coq/coqrc.xxx: is loaded, where
\verb:$XDG_CONFIG_HOME: is the configuration directory of the user (by
default its home directory \verb!/.config! and \verb:xxx: is the version
number (e.g. 8.3).  If this file is not found, then the file
\verb:$XDG_CONFIG_HOME/coqrc: is searched. You can also specify an
arbitrary name for the resource file (see option \verb:-init-file:
below).


This file may contain, for instance, \verb:Add LoadPath: commands to add
directories to the load path of \Coq.
It is possible to skip the loading of the resource file with the
option \verb:-q:.

\subsection{By environment variables\label{EnvVariables}
\index{Environment variables}\label{envars}}

Load path can be specified to the \Coq\ system by setting up
\verb:$COQPATH: environment variable. It is a list of directories
separated by \verb|:| (\verb|;| on windows). {\Coq} will also honor
\verb:$XDG_DATA_HOME: and \verb:$XDG_DATA_DIRS: (see Section
\ref{loadpath}).

Some {\Coq} commands call other {\Coq} commands. In this case, they
look for the commands in directory specified by \verb:$COQBIN:. If
this variable is not set, they look for the commands in the executable
path.

The \verb:$COQ_COLORS: environment variable can be used to specify the set of
colors used by {\tt coqtop} to highlight its output. It uses the same syntax as
the \verb:$LS_COLORS: variable from GNU's {\tt ls}, that is, a colon-separated
list of assignments of the form \verb:name=attr1;...;attrn: where {\tt name} is
the name of the corresponding highlight tag and {\tt attri} is an ANSI escape
code. The list of highlight tags can be retrieved with the {\tt -list-tags}
command-line option of {\tt coqtop}.

\subsection{By command line options\index{Options of the command line}
\label{coqoptions}}

The following command-line options are recognized by the commands {\tt
  coqc} and {\tt coqtop}, unless stated otherwise:

\begin{description}
\item[{\tt -I} {\em directory}, {\tt -include} {\em directory}]\ %

  Add physical path {\em directory} to the {\ocaml} loadpath.

  \SeeAlso Section~\ref{Libraries} and the command {\tt Declare ML Module} Section \ref{compiled}.

\item[{\tt -Q} {\em directory} {\dirpath}]\ %

  Add physical path \emph{directory} to the list of directories where
  {\Coq} looks for a file and bind it to the the logical directory
  \emph{dirpath}. The subdirectory structure of \emph{directory} is
  recursively available from {\Coq} using absolute names (extending
  the {\dirpath} prefix) (see Section~\ref{LongNames}).

  Note that only those subdirectories and files which obey the lexical
  conventions of what is an {\ident} (see Section~\ref{lexical})
  are taken into account. Conversely, the underlying file systems or
  operating systems may be more restrictive than {\Coq}. While Linux's
  ext4 file system supports any {\Coq} recursive layout
  (within the limit of 255 bytes per file name), the default on NTFS
  (Windows) or HFS+ (MacOS X) file systems is on the contrary to
  disallow two files differing only in the case in the same directory.

  \SeeAlso Section~\ref{Libraries}.

\item[{\tt -R} {\em directory} {\dirpath}]\ %

  Do as \texttt{-Q} \emph{directory} {\dirpath} but make the
  subdirectory structure of \emph{directory} recursively visible so
  that the recursive contents of physical \emph{directory} is available
  from {\Coq} using short or partially qualified names.

  \SeeAlso Section~\ref{Libraries}.

\item[{\tt -top} {\dirpath}]\ %

  Set the toplevel module name to {\dirpath} instead of {\tt Top}. Not
  valid for {\tt coqc} as the toplevel module name is inferred from the
  name of the output file.

\item[{\tt -exclude-dir} {\em directory}]\ %

  Exclude any subdirectory named {\em directory} while
  processing options such as {\tt -R} and {\tt -Q}. By default, only the
  conventional version control management directories named {\tt CVS} and
  {\tt \_darcs} are excluded.

\item[{\tt -nois}]\ %

  Start from an empty state instead of loading the {\tt Init.Prelude}
  module.

\item[{\tt -init-file} {\em file}]\ %

  Load {\em file} as the resource file instead of loading the default
  resource file from the standard configuration directories.

\item[{\tt -q}]\ %

  Do not to load the default resource file.

\item[{\tt -load-ml-source} {\em file}]\ %

  Load the {\ocaml} source file {\em file}.

\item[{\tt -load-ml-object} {\em file}]\ %

  Load the {\ocaml} object file {\em file}.

\item[{\tt -l} {\em file}, {\tt -load-vernac-source} {\em file}]\ %

  Load and execute the {\Coq} script from {\em file.v}.

\item[{\tt -lv} {\em file}, {\tt -load-vernac-source-verbose} {\em
    file}]\ %

  Load and execute the {\Coq} script from {\em file.v}.
  Output its content on the standard input as it is executed.

\item[{\tt -load-vernac-object} {\dirpath}]\ %

  Load \Coq~compiled library {\dirpath}. This is equivalent to running
  {\tt Require} {\dirpath}.

\item[{\tt -require} {\dirpath}]\ %

  Load \Coq~compiled library {\dirpath} and import it. This is equivalent
  to running {\tt Require Import} {\dirpath}.

\item[{\tt -batch}]\ %

  Exit just after argument parsing. Available for {\tt coqtop} only.

\item[{\tt -compile} {\em file.v}]\ %

  Compile file {\em file.v} into {\em file.vo}. This options imply {\tt
    -batch} (exit just after argument parsing). It is available only
  for {\tt coqtop}, as this behavior is the purpose of {\tt coqc}.

\item[{\tt -compile-verbose} {\em file.v}]\ %

  Same as {\tt -compile} but also output the content of {\em file.v} as
  it is compiled.

\item[{\tt -verbose}]\ %

  Output the content of the input file as it is compiled. This option is
  available for {\tt coqc} only; it is the counterpart of {\tt
    -compile-verbose}.

  \item[{\tt -w} (all|none|w$_1$,\ldots,w$_n$)]\ %

  Configure the display of warnings. This option expects {\tt all}, {\tt none}
  or a comma-separated list of warning names or categories (see
  Section~\ref{SetWarnings}).

%Mostly unused in the code
%\item[{\tt -debug}]\ %
%
%  Switch on the debug flag.

\item[{\tt -color} (on|off|auto)]\ %

  Enable or not the coloring of output of {\tt coqtop}. Default is auto,
  meaning that {\tt coqtop} dynamically decides, depending on whether the
  output channel supports ANSI escape sequences.

\item[{\tt -beautify}]\ %

  Pretty-print each command to {\em file.beautified} when compiling {\em
    file.v}, in order to get old-fashioned syntax/definitions/notations.

\item[{\tt -emacs}, {\tt -ide-slave}]\ %

  Start a special toplevel to communicate with a specific IDE.

\item[{\tt -impredicative-set}]\ %

  Change the logical theory of {\Coq} by declaring the sort {\tt Set}
  impredicative. Warning: this is known to be inconsistent with
  some standard axioms of classical mathematics such as the functional
  axiom of choice or the principle of description.

\item[{\tt -type-in-type}]\ %

  Collapse the universe hierarchy of {\Coq}. Warning: this makes the
  logic inconsistent.

\item[{\tt -compat} {\em version}]\ %

  Attempt to maintain some backward-compatibility with a previous version.

\item[{\tt -dump-glob} {\em file}]\ %

  Dump references for global names in file {\em file} (to be used
  by {\tt coqdoc}, see~\ref{coqdoc}). By default, if {\em file.v} is being
  compiled, {\em file.glob} is used.

\item[{\tt -no-glob}]\ %

  Disable the dumping of references for global names.

%\item[{\tt -no-hash-consing}]\ %

\item[{\tt -image} {\em file}]\ %

  Set the binary image to be used by {\tt coqc} to be {\em file}
  instead of the standard one. Not of general use.

\item[{\tt -bindir} {\em directory}]\ %

  Set the directory containing {\Coq} binaries to be used by {\tt coqc}.
  It is equivalent to doing \texttt{export COQBIN=}{\em directory} before
  launching {\tt coqc}.

\item[{\tt -where}]\ %

  Print the location of \Coq's standard library and exit.

\item[{\tt -config}]\ %

  Print the locations of \Coq's binaries, dependencies, and libraries, then exit.

\item[{\tt -filteropts}]\ %

  Print the list of command line arguments that {\tt coqtop} has
  recognized as options and exit.

\item[{\tt -v}]\ %

  Print \Coq's version and exit.

\item[{\tt -list-tags}]\ %

  Print the highlight tags known by {\Coq} as well as their currently associated
  color and exit.

\item[{\tt -h}, {\tt --help}]\ %

  Print a short usage and exit.

\end{description}


\section{Compiled libraries checker ({\tt coqchk})}

The {\tt coqchk} command takes a list of library paths as argument, described
either by their logical name or by their physical filename, which must end in
{\tt .vo}. The corresponding compiled libraries (.vo files) are searched in the
path, recursively processing the libraries they depend on. The content
of all these libraries is then type-checked. The effect of {\tt
  coqchk} is only to return with normal exit code in case of success,
and with positive exit code if an error has been found. Error messages
are not deemed to help the user understand what is wrong. In the
current version, it does not modify the compiled libraries to mark
them as successfully checked.

Note that non-logical information is not checked. By logical
information, we mean the type and optional body associated to names.
It excludes for instance anything related to the concrete syntax of
objects (customized syntax rules, association between short and long
names), implicit arguments, etc.

This tool can be used for several purposes. One is to check that a
compiled library provided by a third-party has not been forged and
that loading it cannot introduce inconsistencies.\footnote{Ill-formed
  non-logical information might for instance bind {\tt
    Coq.Init.Logic.True} to short name {\tt False}, so apparently {\tt
    False} is inhabited, but using fully qualified names, {\tt
    Coq.Init.Logic.False} will always refer to the absurd proposition,
  what we guarantee is that there is no proof of this latter
  constant.}
Another point is to get an even higher level of security. Since {\tt
  coqtop} can be extended with custom tactics, possibly ill-typed
code, it cannot be guaranteed that the produced compiled libraries are
correct. {\tt coqchk} is a standalone verifier, and thus it cannot be
tainted by such malicious code.

Command-line options {\tt -I}, {\tt -R}, {\tt -where} and
{\tt -impredicative-set} are supported by {\tt coqchk} and have the
same meaning as for {\tt coqtop}. Extra options are:
\begin{description}
\item[{\tt -norec} {\em module}]\ %

  Check {\em module} but do not check its dependencies.

\item[{\tt -admit} {\em module}]\ %

  Do not check {\em module} and any of its dependencies, unless
  explicitly required.

\item[{\tt -o}]\ %

  At exit, print a summary about the context. List the names of all
  assumptions and variables (constants without body).

\item[{\tt -silent}]\ %

  Do not write progress information in standard output.
\end{description}

Environment variable \verb:$COQLIB: can be set to override the
location of the standard library.

The algorithm for deciding which modules are checked or admitted is
the following: assuming that {\tt coqchk} is called with argument $M$,
option {\tt -norec} $N$, and {\tt -admit} $A$. Let us write
$\overline{S}$ the set of reflexive transitive dependencies of set
$S$. Then:
\begin{itemize}
\item Modules $C=\overline{M}\backslash\overline{A}\cup M\cup N$ are
  loaded and type-checked before being added to the context.
\item And $\overline{M}\cup\overline{N}\backslash C$ is the set of
  modules that are loaded and added to the context without
  type-checking. Basic integrity checks (checksums) are nonetheless
  performed.
\end{itemize}

As a rule of thumb, the {\tt -admit} can be used to tell that some
libraries have already been checked. So {\tt coqchk A B} can be split
in {\tt coqchk A \&\& coqchk B -admit A} without type-checking any
definition twice. Of course, the latter is slightly slower since it
makes more disk access. It is also less secure since an attacker might
have replaced the compiled library $A$ after it has been read by the
first command, but before it has been read by the second command.

%%% Local Variables: 
%%% mode: latex
%%% TeX-master: "Reference-Manual"
%%% End: