\chapter[The \Coq~commands]{The \Coq~commands\label{Addoc-coqc}
\ttindex{coqtop}
\ttindex{coqc}}

There are three \Coq~commands: 
\begin{itemize}
\item {\tt coqtop}: The \Coq\ toplevel (interactive mode) ; 
\item {\tt coqc} : The \Coq\ compiler (batch compilation).
\item {\tt coqchk} : The \Coq\ checker (validation of compiled libraries)
\end{itemize}
The options are (basically) the same for the first two commands, and
roughly described below. You can also look at the \verb!man! pages of
\verb!coqtop! and \verb!coqc! for more details.


\section{Interactive use ({\tt coqtop})}

In the interactive mode, also known as the \Coq~toplevel, the user can
develop his theories and proofs step by step.  The \Coq~toplevel is
run by the command {\tt coqtop}. 

\index{byte-code}
\index{native code}
\label{binary-images}
They are two different binary images of \Coq: the byte-code one and
the native-code one (if Objective Caml provides a native-code compiler
for your platform, which is supposed in the following).  When invoking
\verb!coqtop! or \verb!coqc!, the native-code version of the system is
used.  The command-line options \verb!-byte! and \verb!-opt! explicitly
select the byte-code and the native-code versions, respectively.

The byte-code toplevel is based on a Caml
toplevel (to allow the dynamic link of tactics).  You can switch to
the Caml toplevel with the command \verb!Drop.!, and come back to the
\Coq~toplevel with the command \verb!Toplevel.loop();;!.

% The command \verb!coqtop -searchisos! runs the search tool {\sf
%   Coq\_SearchIsos} (see Section~\ref{coqsearchisos},
% page~\pageref{coqsearchisos}) and, as the \Coq~system, can be combined
% with the option \verb!-opt!.

\section{Batch compilation ({\tt coqc})}
The {\tt coqc} command takes a name {\em file} as argument.  Then it
looks for a vernacular file named {\em file}{\tt .v}, and tries to
compile it into a {\em file}{\tt .vo} file (See ~\ref{compiled}).

\Warning The name {\em file} must be a regular {\Coq} identifier, as
defined in the Section~\ref{lexical}. It
must only contain letters, digits or underscores
(\_). Thus it can be \verb+/bar/foo/toto.v+ but cannot be
\verb+/bar/foo/to-to.v+ . 

Notice that the \verb!-byte! and \verb!-opt! options are still
available with \verb!coqc!  and allow you to select the byte-code or
native-code versions of the system.


\section[Resource file]{Resource file\index{Resource file}}

When \Coq\ is launched, with either {\tt coqtop} or {\tt coqc}, the
resource file \verb:$HOME/.coqrc.xxx: is loaded, where \verb:$HOME: is
the home directory of the user and \verb:xxx: is the version number
(e.g. 8.3).  If this file is not found, then the file
\verb:$HOME/.coqrc: is searched. You can also specify an arbitrary
name for the resource file (see option \verb:-init-file: below), or
the name of another user to load the resource file of someone else
(see option \verb:-user:).


This file may contain, for instance, \verb:Add LoadPath: commands to add
directories to the load path of \Coq.
It is possible to skip the loading of the resource file with the
option \verb:-q:.

\section[Environment variables]{Environment variables\label{EnvVariables}
\index{Environment variables}}

There are three environment variables used by the \Coq\ system.
\verb:$COQBIN: for the directory where the binaries are,
\verb:$COQLIB: for the directory where the standard library is, and 
\verb:$COQTOP: for the directory of the sources. The latter is useful
only for developers that are writing their own tactics and are using
\texttt{coq\_makefile} (see \ref{Makefile}). If \verb:$COQBIN: or
\verb:$COQLIB: are not defined, \Coq\ will use the default values
(defined at installation time). So these variables are useful only if
you move the \Coq\ binaries and library after installation.

\section[Options]{Options\index{Options of the command line}
\label{vmoption}
\label{coqoptions}}

The following command-line options are recognized by the commands {\tt
  coqc} and {\tt coqtop}, unless stated otherwise:

\begin{description}
\item[{\tt -byte}]\ 

  Run the byte-code version of \Coq{}.

\item[{\tt -opt}]\ 

  Run the native-code version of \Coq{}.

\item[{\tt -I} {\em directory}, {\tt -include} {\em directory}]\ 

  Add physical path {\em directory} to the list of directories where to
  look for a file and bind it to the empty logical directory. The
  subdirectory structure of {\em directory} is recursively available
  from {\Coq} using absolute names (see Section~\ref{LongNames}).

\item[{\tt -I} {\em directory} {\tt -as} {\em dirpath}]\ 

  Add physical path {\em directory} to the list of directories where to
  look for a file and bind it to the logical directory {\dirpath}.  The
  subdirectory structure of {\em directory} is recursively available
  from {\Coq} using absolute names extending the {\dirpath} prefix.

  \SeeAlso {\tt Add LoadPath} in Section~\ref{AddLoadPath} and logical
  paths in Section~\ref{Libraries}.

\item[{\tt -R} {\em directory} {\dirpath}, {\tt -R} {\em directory} {\tt -as} {\dirpath}]\

  Do as {\tt -I} {\em directory} {\tt -as} {\dirpath} but make the
  subdirectory structure of {\em directory} recursively visible so
  that the recursive contents of physical {\em directory} is available
  from {\Coq} using short or partially qualified names.
  
  \SeeAlso {\tt Add Rec LoadPath} in Section~\ref{AddRecLoadPath} and logical
  paths in Section~\ref{Libraries}.

\item[{\tt -top} {\dirpath}]\ 

  This sets the toplevel module name to {\dirpath} instead of {\tt
  Top}. Not valid for {\tt coqc}.

\item[{\tt -notop} {\dirpath}]\ 

  This sets the toplevel module name to the empty logical dirpath. Not
  valid for {\tt coqc}.

\item[{\tt -exclude-dir} {\em subdirectory}]\ 

  This tells to exclude any subdirectory named {\em subdirectory}
  while processing option {\tt -R}. Without this option only the
  conventional version control management subdirectories named {\tt
  CVS} and {\tt \_darcs} are excluded.

\item[{\tt -is} {\em file}, {\tt -inputstate} {\em file}]\ 

  Cause \Coq~to use the state put in the file {\em file} as its input
  state. The default state is {\em initial.coq}.
  Mainly useful to build the standard input state.

\item[{\tt -outputstate} {\em file}]\ 

  Cause \Coq~to dump its state to file {\em file}.coq just after finishing
  parsing and evaluating all the arguments from the command line.

\item[{\tt -nois}]\ 

  Cause \Coq~to begin with an empty state. Mainly useful to build the
  standard input state.

%Obsolete?
%
%\item[{\tt -notactics}]\ 
%
%  Forbid the dynamic loading of tactics in the bytecode version of {\Coq}.

\item[{\tt -init-file} {\em file}]\ 

  Take {\em file} as the resource file.

\item[{\tt -q}]\ 

  Cause \Coq~not to load the resource file.

\item[{\tt -user} {\em username}]\ 

  Take resource file of user {\em username} (that is 
  \verb+~+{\em username}{\tt /.coqrc.7.0}) instead of yours.

\item[{\tt -load-ml-source} {\em file}]\ 

  Load the Caml source file {\em file}.

\item[{\tt -load-ml-object} {\em file}]\ 

  Load the Caml object file {\em file}.

\item[{\tt -l} {\em file}, {\tt -load-vernac-source} {\em file}]\ 

  Load \Coq~file {\em file}{\tt .v}

\item[{\tt -lv} {\em file}, {\tt -load-vernac-source-verbose} {\em file}]\ 

  Load \Coq~file {\em file}{\tt .v} with 
  a copy of the contents of the file on standard input.

\item[{\tt -load-vernac-object} {\em file}]\ 

  Load \Coq~compiled file {\em file}{\tt .vo}

%\item[{\tt -preload} {\em file}]\ \\
%Add {\em file}{\tt .vo} to the files to be loaded and opened
%before making the initial state.
%
\item[{\tt -require} {\em file}]\ 

  Load \Coq~compiled file {\em file}{\tt .vo} and import it ({\tt
    Require} {\em file}).

\item[{\tt -compile} {\em file}]\ 

  This compiles file {\em file}{\tt .v} into {\em file}{\tt .vo}.
  This option implies options {\tt -batch} and {\tt -silent}. It is
  only available for {\tt coqtop}.

\item[{\tt -compile-verbose} {\em file}]\ 

  This compiles file {\em file}{\tt .v} into {\em file}{\tt .vo} with
  a copy of the contents of the file on standard input.
  This option implies options {\tt -batch} and {\tt -silent}. It is
  only available for {\tt coqtop}.

\item[{\tt -verbose}]\ 

  This option is only for {\tt coqc}. It tells to compile the file with
  a copy of its contents on standard input.

\item[{\tt -batch}]\ 

  Batch mode : exit just after arguments parsing. This option is only
  used by {\tt coqc}.

%Mostly unused in the code
%\item[{\tt -debug}]\ 
%
%  Switch on the debug flag.

\item[{\tt -xml}]\ 

  This option is for use with {\tt coqc}. It tells \Coq\ to export on
  the standard output the content of the compiled file into XML format.

\item[{\tt -quality}]

  Improve the legibility of the proof terms produced by some tactics.

\item[{\tt -emacs}]\ 

  Tells \Coq\ it is executed under Emacs.

\item[{\tt -impredicative-set}]\ 

  Change the logical theory of {\Coq} by declaring the sort {\tt Set}
  impredicative; warning: this is known to be inconsistent with
  some standard axioms of classical mathematics such as the functional
  axiom of choice or the principle of description

\item[{\tt -dump-glob} {\em file}]\

  This dumps references for global names in file {\em file}
  (to be used by coqdoc, see~\ref{coqdoc})
 
\item[{\tt -dont-load-proofs}]\ 

  This avoids loading in memory the proofs of opaque theorems
  resulting in a smaller memory requirement and faster compilation;
  warning: this invalidates some features such as the extraction tool.

\item[{\tt -vm}]\ 

  This activates the use of the bytecode-based conversion algorithm
  for the current session (see Section~\ref{SetVirtualMachine}).

\item[{\tt -image} {\em file}]\ 

  This option sets the binary image to be used to be {\em file}
  instead of the standard one. Not of general use.

\item[{\tt -bindir} {\em directory}]\ 

  Set for {\tt coqc} the directory containing \Coq\ binaries.
  It is equivalent to do \texttt{export COQBIN=}{\em directory}
  before lauching {\tt coqc}.

\item[{\tt -where}]\ 

  Print the \Coq's standard library location and exit.

\item[{\tt -v}]\ 

  Print the \Coq's version and exit.

\item[{\tt -h}, {\tt --help}]\ 

  Print a short usage and exit.

\end{description}


\section{Compiled libraries checker ({\tt coqchk})}

The {\tt coqchk} command takes a list of library paths as argument.
The corresponding compiled libraries (.vo files) are searched in the
path, recursively processing the libraries they depend on. The content
of all these libraries is then type-checked. The effect of {\tt
  coqchk} is only to return with normal exit code in case of success,
and with positive exit code if an error has been found. Error messages
are not deemed to help the user understand what is wrong. In the
current version, it does not modify the compiled libraries to mark
them as successfully checked.

Note that non-logical information is not checked. By logical
information, we mean the type and optional body associated to names.
It excludes for instance anything related to the concrete syntax of
objects (customized syntax rules, association between short and long
names), implicit arguments, etc.

This tool can be used for several purposes. One is to check that a
compiled library provided by a third-party has not been forged and
that loading it cannot introduce inconsistencies.\footnote{Ill-formed
  non-logical information might for instance bind {\tt
    Coq.Init.Logic.True} to short name {\tt False}, so apparently {\tt
    False} is inhabited, but using fully qualified names, {\tt
    Coq.Init.Logic.False} will always refer to the absurd proposition,
  what we guarantee is that there is no proof of this latter
  constant.}
Another point is to get an even higher level of security. Since {\tt
  coqtop} can be extended with custom tactics, possibly ill-typed
code, it cannot be guaranteed that the produced compiled libraries are
correct. {\tt coqchk} is a standalone verifier, and thus it cannot be
tainted by such malicious code.

Command-line options {\tt -I}, {\tt -R}, {\tt -where} and
{\tt -impredicative-set} are supported by {\tt coqchk} and have the
same meaning as for {\tt coqtop}. Extra options are:
\begin{description}
\item[{\tt -norec} $module$]\ 

  Check $module$ but do not force check of its dependencies.
\item[{\tt -admit} $module$] \

  Do not check $module$ and any of its dependencies, unless
  explicitly required.
\item[{\tt -o}]\ 

  At exit, print a summary about the context. List the names of all
  assumptions and variables (constants without body).
\item[{\tt -silent}]\ 

  Do not write progress information in standard output.
\end{description}

Environment variable \verb:$COQLIB: can be set to override the
location of the standard library.

The algorithm for deciding which modules are checked or admitted is
the following: assuming that {\tt coqchk} is called with argument $M$,
option {\tt -norec} $N$, and {\tt -admit} $A$. Let us write
$\overline{S}$ the set of reflexive transitive dependencies of set
$S$. Then:
\begin{itemize}
\item Modules $C=\overline{M}\backslash\overline{A}\cup M\cup N$ are
  loaded and type-checked before being added to the context.
\item And $\overline{M}\cup\overline{N}\backslash C$ is the set of
  modules that are loaded and added to the context without
  type-checking. Basic integrity checks (checksums) are nonetheless
  performed.
\end{itemize}

As a rule of thumb, the {\tt -admit} can be used to tell that some
libraries have already been checked. So {\tt coqchk A B} can be split
in {\tt coqchk A \&\& coqchk B -admit A} without type-checking any
definition twice. Of course, the latter is slightly slower since it
makes more disk access. It is also less secure since an attacker might
have replaced the compiled library $A$ after it has been read by the
first command, but before it has been read by the second command.

%%% Local Variables: 
%%% mode: latex
%%% TeX-master: "Reference-Manual"
%%% End: